HELP - Major Perfromance Issues with O2 XDA Flame - MDA III, XDA III, PDA2k, 9090 General

Please help, I recently bought the O2 XDA Flame. I had been using the device for a couple of months. As time went on the speed of the phone has deteriorated. At first i thought it was nothing, so i would restart the phone. But then came another issue, after the restart the device would take even longer respond to any command. It would just hang during phone calls also would have isseu with opening the contact etc. I even tried to Hard reset the darn thing but it would not work and would just keep hanging on me.
Please if anyone has any information it would helpful!!!
Help Help Help!!!

Related

XDA Exec Freezing After Software Upgrade

Hi,
I hope no one has asked this elsewhere - I looked, but didn't find anything similar.
I have an XDA Exec, which I tried to upgrade the software on today. Ever since I am unable to turn it on. I get as far as the O2 screen with the red writing and that's it.
No amount of soft resetting, hard resetting, taking the battery out or pleading to its better nature will help.
Has anyone else had this problem and how do I solve it?
Because I can't turn it on I can't even get my computer to recognise it?
Any help will be greatly appreciated.
Thanks again.

White screen of death

Hello everybody,
I seem to have a major problem with my XDA Orbit: Not only it shuts down with no apparent reason so that I have to reset it, but it shows sometimes the dreaded "white screen of death" - from now on "WHISOD". The screen all of the sudden slowly goes white and sometimes shows dark vertical bands. After that - if I am lucky - I can reset the device, however a couple of times I already had to hard reset end even reflash it.
I have already checked software and plugin problems and would rather say that it seems to be a hardware problem. Any ideas out there. They would be highly appreciated.
Best regards,
Smack
i had the same problem and as at now my phone is dead becuase i did not flash it with the original rom. look for the rom it came with and flash it to the phone ,like how u first got the phone or u will loos ur phone very soon
I am not at all sure if it has to do with the ROM. I have tried different ROMs to check the error but it appeared with all of them. However the next time I will try again with the latest official ROM.
Thanks for the comment and your help. BTW Did you send your Orbit in for repair?
Regards,
Smack
Hi, do you use the uspl before every new rom install? Try it.
I have the same problem, my htc3300 is almost dead I think. No way I can even turn it on, allways end in the windows screen, and it was because I didn`t use the uspl before last rom install.
Give it a try, and let us know.
See ya.
Thanks. No flashing problem. I have flashed a couple of devices (always unlocking them before ;-) )and have had no problems whatsoever.
The problem I mentioned is not connected to any earlier flashing. The device works a couple of hours perfectly. However suddenly it starts to behave like crazy.
Now to your problem: If you can get into boot loader modus you will most probably be able to unlock your item. Search for uspl and download it. Then get into boot loader mode (press voice recorder button and power button while resetting the device) and you will get a three colored screen. Then connect the USB cable. You will see "usb" in small fonts on the screen of the device. Now you can run uspl. With a little luck the device starts again. However you can flash it again with a fresh ROM the same way (after unlocking it). This may (!) work.
Regards,
Smack
Hello,
I have the same problem, I already hard reset end even reflash my p3300 many times with different ROM.
I even tried running it for some time with and without the micro SD, ending with the same result: the screen of death.
Any ideas , tips, anyone ?
Thanks,
Roundi
Ok, I tried the following: Just take the battery out for six or seven hours and insert it again. The device seems to run smoother. Will keep you posted. Tell me if it works out for you.
Regards,
Smack
Ok, just removed the battery, I will leave till tomorrow morning.
I will keep you updated.
Thanks,
Roundi.
I have same problem here - though mine is the second phone and the fifth motherboard I've had. HTC just don't seem to able to fix it. I'm now trying to get a refund.
Hi, Jem.
Yes that's something I have thought about too. Did you you use the original ROM? However right now the system seems to be more stable. I have had only one blank screen after removing the battery (and one shut down).
Regards,
Smack
I have just put in the battery and switched on the phone after almost 24h.
So far so good.... I will try to use it for a while and will let you know.
Regards,
Roundi
Had the same problem again, when using Mortplayer. I have Mortplayer installed on the SD card. Could it be that the problems arise, when there is heavy usage of the SD Card?
Any ideas are welcome.
Regards,
Smack
Again it went SOD shortly after turning it on. I didn't launch any applications.
I am stuck here.....

indeterministical crashes

Hello,
I have a strange problem with my HTC Artemis (O2 XDA branded, bought in Germany, no lock)
It behaves unstable and indeterministic.
Unstable means that it crashes/stucks or turns off.
Indeterministic means that it happens when i plugg it to charger, when i'm syncing, when a phone rings, when using applications/tomtom or just i arrive to work and i find the device off.
When it crashes or i find it off, the biggest problem is to boot the device. It takes me typically 10mins, when i'm always trying to press the power button, push the reset button or unplugg the battery for a while in random order until i bring it to work.
After first crach, the device also often crashes or stucks again during the boot process.
Once, the device was so dead, that it took me two days to bring it into bootloader mode and then i could at least flash the ROM.
All these was happening with ARTEMIS TOUCH 4.01 WWE - LITE NO CUBE.
Yesterday, i switched to ARTEMIS TOUCH 4.02 WWE - LITE NO CUBE (burned FW twice) without installing any other applications and the problems are still here
My personal feeling is that it is getting every week worser.
When i bought the device (eBay), there was original FW with Win Mobile 5 on it, i immediately flashed to ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device. So i flashed to 4.01 and this issue was away, but approx 2months ago, the above described behaviour has started and nowdays i'm fighting with it 2-3x a day.
so, can anybody help?
GiZMo
Similar here
I have a similar problem, what's really strange to me is, that as far as i can recall it started happening 2 months ago or so also!! weird huh...
my device simply reboots from time to time! even while i'm making a call.
the weird thing about these reboots is that when it comes back to live i do not have to enter my pin to enable the phone! everytime i perform a manual reboot (by software, using the pin or remove battery) i have to insert my pin to able to make a call...
i have upgraded from 3.01 full touch to 4.02 full touch about the time it started, i have now 4.02 vanilla touch but problem still occurs from time to time.
any ideas?
Im another one to join this boat!
Bought an MDA C 3, two days ago, bought of someone from gumtree.com.
Worked fine for the first hour, and then locked up - nothing on the screen, no LED. Only way to get it going was to remove battery and then press power button.
I upgraded the ROM from the original t-mob UK WM5 to mechles fine release: http://forum.xda-developers.com/showthread.php?t=371182
The lock-ups / crashes have now become rarer, on average every 4 hours (before was every 1 hour).
There is no pattern to them either, although I have saw the screen trun all corrupted just before it happens. The last one was caused when I pressed the 'start' button.
I'm on a T-Mob contract, and lost my Kaiser, got ripped of when I tryed to replace it by a tosser on here for $375 Thief on the loose thread, and was hoping my luck had changed when I bought this one!!
It is T-mob branded and I wonder if there isn't a fix on here, would T-Mob repair it under warranty??
same "issue" with no entering of PIN after reboot. But not always
GiZMoSK said:
ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device.
Click to expand...
Click to collapse
here i found a good description of that issue:
"
Originally Posted by lasertony
I've got the same problem as !Novy, but nobody seems to have noticed his question. Are there any other guys out there with this strange problem ? I have been using this rom for a while and sometimes, without any visual warning the phone freezes up. This is particularly ennoying because there is no way to check wether it is working or not. Every other function or software keeps working ! The phone is just not receiving any calls or sms. So you can miss an entire day of calls and sms without knowing... Only when trying to call somebody the dialer says 'Dialing...' and nothing happens. No connection.
A soft reset is needed to get the phone working again.
"
btw, now i'm again trying to turn the device on, it's again stuck. grrr
Hello,
i had a few weeks ago a similar strange behaviour.
After changing the sd-card I had problems to turn the device on. After a hard reset it began to boot but hang.
The I flashed back to original O2 ROM. Then I had a unpredictable behaviour. Somtimes no sound. Sometimes I cound not be called. Sometimes Error message "no sim card". After every reset i had an other error.
Hard reset and flashing was no solution. Removing battery for less than 4 hours has no effect.
Then I wanted to send it back for repair. I took of the battery. The next day I wanted to try a last time and surprise: The device works fine without an error. Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
regards
Andre
It is Happening to my device too!!
It stucks every 2-3 hours!Tried many of the cooked ROMs but nothing.Also tried all the radio roms for 1-2 days.still the same!
It stucks with no particular reason.SOmetimes in s2u2 sometimes when am receiving a call.... etc.
Had the pin problem too for 3-4 times!
I will try your sugestion ANDRE and we will see!
Also i will try flashing the original rom,cid unlock and then flash the cood rom twice!
Fingers crosed....
Andre1210 said:
Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
Click to expand...
Click to collapse
didn't help
happy u
now, i will try to flash back original german o2 rom
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
bricked or not?
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Vinnie1 said:
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
Click to expand...
Click to collapse
I thought it was a battery problem too, but I've 2 batteries and both are died in the same time? I think it's too strange...
My P3300 have this problem from when it is returned from assistence and with original firmware (without other applications).
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
GiZMoSK said:
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Click to expand...
Click to collapse
jahrami said:
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
but i cannot get into bootloader mode so no flashing from SD card or PC
bricked device
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
GiZMoSK said:
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
Click to expand...
Click to collapse
the good sign are the leds that means you have a very good chance...the guy made the piont...check the wiki
random crashes are often caused by hardware malfunction...sometimes the connection on the motherboard stuck,get broken or make a short-circuit...so check the hardware

Weird bricked GT-I9195 stuck on black screen after Samsung logo

So, unluckily today i find myself here lookin' for help with my phone. I had already took a look on other brick threads, but i can't find an appropriate answer to my problem.
I'm (i was) running lineage-14.1-20170602-nightly, i had ne0zone75's TWRP 3.1.0.0-0, and that's how the brick came in a strange way; i was simply on XDA Labs app browsing the forum, when i received a call. I've answered, and when i shut off the call the phone shut off immediately after. I thought it was a reboot, but keeping pressed the power button didn't switched on the phone anymore. So i've tried to remove the battery and re insert it after some minutes, but the only thing i can get is the screen with the samsung logo that goes all black after 5 seconds. I already had other bricks due some errors of mine in the past, but this time it's really difficult.
1: I can't access recovery mode. Ow, how i wish i could.
2: I can access download mode, but after that i reach the ODIN MODE screen with the details of product binary, KNOX, ecc. the phone shuts off again.
3: If i keep the power button pressed, the phone doesn't starts. It only starts if i replug the battery in, but after some seconds it shuts off again.
4: How could a call as another mess up the whole phone?
5: I didn't installed nothing new from at least a week... yesterday an automatic update of the Play Store took place, but except that nothing has been changed. Nothing of nothing! No settings, no apps...
What could i do? Installing Kies with Samsung drivers could help me flashing a stock rom for example? Because at the moment, there isn't too much that i can do with the phone in this state... I hope this little jewel won't have to become a stone to be thrown away. Any help would be great, and really appreciated. Thanks in advance...
Things has got worse. Now my device doesn't starts at all; no vibrations, no signs of life, nothing. I've tried even to put it for 6 hours in my refrigerator, because i've read that the cold temperature could be helpful to fix some broken contacts on some component, but i'm losing hope 'bout it. I supposed that at this point is something hardware-based and not software, because it's just impossible that a call like an other one could be the cause of this hard brick... The only thing is that if connected to my PC, it is being showed as QHSUSB_LOAD. I'll try some methods that i've seen in other forums, like softwares that tries to fix this, but i think that i'll be forced to buy a new device. Neither an usb-jig could help me to force the download mode if the phone is dead in every aspect... the only thing that i still didn't understood, is if a debrick.img on my SD card (sadly i've read that a microSD class 10 with at least 16 GB is required, and i don't have one) could help somehow on a situation like this one of not. Still no one could advice me with some tip, guys
Edit - feel free to close this thread, I have another phone now

Samsung Galaxy S7 Software Issue

Hi,
So a few months ago I regrettably decided to try and root my Samsung Galaxy s7. It did not go well, and from the feedback from the firm I sent it for software repairs, apparently a second partition was created which caused start-up issues. They said they fixed it and for a few months the phone worked well. Until now.
The phone refuses to startup. It is currently plugged into the mains and showing a steady 51% (which I know from previous experience will be the maximum it reaches) If I press the power button it goes through the loading screen (the animated Samsung logo) then shuts off, then tries again and again never making it past this point.
The things I've tried:
Tried every kind of reset
Run the restart process with every combination of sim card, sd card and lackthereof
I remember that the guy that fixed my phone offhandedly commented that he could see the issue on his PC, presumably via a software of some-sorts. Anybody know what this could be?
So, nothing seems to work and in a last bid of desperation I googled the issue and came across this website.
Perhaps a kind Samaritan here might know how to fix my issue? Any help would be greatly appreciated.
CorrinRoth said:
Hi,
So a few months ago I regrettably decided to try and root my Samsung Galaxy s7. It did not go well, and from the feedback from the firm I sent it for software repairs, apparently a second partition was created which caused start-up issues. They said they fixed it and for a few months the phone worked well. Until now.
The phone refuses to startup. It is currently plugged into the mains and showing a steady 51% (which I know from previous experience will be the maximum it reaches) If I press the power button it goes through the loading screen (the animated Samsung logo) then shuts off, then tries again and again never making it past this point.
The things I've tried:
Tried every kind of reset
Run the restart process with every combination of sim card, sd card and lackthereof
I remember that the guy that fixed my phone offhandedly commented that he could see the issue on his PC, presumably via a software of some-sorts. Anybody know what this could be?
So, nothing seems to work and in a last bid of desperation I googled the issue and came across this website.
Perhaps a kind Samaritan here might know how to fix my issue? Any help would be greatly appreciated.
Click to expand...
Click to collapse
You are at wrong forum. If you are new to XDA, then let me tell you, XDA has device specific forums, means we are discussing only one device here, help for other devices will not be provided on different device forum.
Click the following link, it's Galaxy S7 (see guide section, it will have flashing guide of Stock ROM) : https://forum.xda-developers.com/galaxy-s7
I need a software can be used to manager all the data of my Android phone ,

Categories

Resources