This is just a start of a "real clean rom" mini-project.
I'll try to make a ROM small that includes just OS and drivers for our device.
It's based on original ROM ver. of HTC (AKU 0.4.2)!
very nice... can't wait for it...
will it be in WWE version and in Dutch version?
Thanks for the hard work...
Nice job, NikMel. Any update?
BTW, any link to read about making "big storage" ROM for Artemis? Any problem with battery life?
Thanks.
NikMel said:
This is just a start of a "real clean rom" mini-project.
I'll try to make a ROM small that includes just OS and drivers for our device.
It's based on original ROM ver. of HTC (AKU 0.4.2)!
Click to expand...
Click to collapse
How have you installed a rom smaller then 50MB?
Have U modified RomUpdateUtility?
Seems very Nice
It's a real good idea.
Is it a BigStorage? interesting......
I'm waiting for try it, but....how can you flash the Rom <50Mb?
will be a good job but i would suggest trying it with few applications before release only 4MB of memory is used - did i get that right?
This is a bigstorage rom yes
To install a rom this small you need to put it on your sdcard and boot into bootscreen RGB.
bigix1 said:
It's a real good idea.
Is it a BigStorage? interesting......
I'm waiting for try it, but....how can you flash the Rom <50Mb?
Click to expand...
Click to collapse
My intention is to make a rom with the bigest possible storage.
jahrami said:
will be a good job but i would suggest trying it with few applications before release only 4MB of memory is used - did i get that right?
Click to expand...
Click to collapse
Can't wait to try this. Hopefully, clean out my PDA and speed things up a bit, with only that installed which I will use!
Go for it!!!!
how come this device shows it has 68mb of storage and my device only shows 47mb of storage (next to the 49mb program memory)
Can somebody also explain to me what the difference is between the two. If I install a program it will use storage space won't it, so why the differenc between the two?
thanks
Will it also have removed all the HTC files (HTC home, cube and others)
thanks
Patrick
it will be a great job
thanks NikMel - look forward to try this rom
NikMel said:
My intention is to make a rom with the bigest possible storage.
Click to expand...
Click to collapse
He NikMel. Is it Windows Mobile 6 or 6.1. I am waiting for this Rom with a lot of free storage.
Thanks.
thanks dear chair up
Hi, is this ROM ready for use or death ???
I dont found any link for download.
Thx
I Think this thread is dead.
Dead
Yeah Really. This thread is now dead.
Thanks
Related
Finally HTC has released the new firmware for P3300 (aka Artemis) in varous languages (I'm italian, so I'm interesting on italian version).
It's not the last OS vesion, but I think it's better cook a firm certified for this PDA than adapt a firm build for other HW.
By now I've removed Extended_ROM, Windows Live, Games (never used) and AutoUpdate, so ROM is stable and very light (53 MB free Storage and 25 MB free Programs).
I have some problem that needs your help:
1) How can I remove software protection (the advice installing a not certified program)???
2) Why "Home Plug" doesn't work??? (Perhaps a protection problem???)
3) There is a patch for MediaPlayer (it doesn't work in stand-by)???
With this community I have learned a lot, I'm sure you know how to solve all!!!
From Meschle Vannilla 2.0
3) Windows media player 10.3.18521 - plays in standby mode. *
PS. I'm italian too... so Good Cooking
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:1
Is this the key to solve 1) ???
PS: thanks, I'll try with this wmp.
before cooking check the htchome.dll file:
is it signed and has it oem sign 2005?
cesconoa said:
Finally HTC has released the new firmware for P3300 (aka Artemis) in varous languages (I'm italian, so I'm interesting on italian version).
It's not the last OS vesion, but I think it's better cook a firm certified for this PDA than adapt a firm build for other HW.
By now I've removed Extended_ROM, Windows Live, Games (never used) and AutoUpdate, so ROM is stable and very light (53 MB free Storage and 25 MB free Programs).
I have some problem that needs your help:
1) How can I remove software protection (the advice installing a not certified program)???
2) Why "Home Plug" doesn't work??? (Perhaps a protection problem???)
3) There is a patch for MediaPlayer (it doesn't work in stand-by)???
With this community I have learned a lot, I'm sure you know how to solve all!!!
Click to expand...
Click to collapse
NikMel said:
before cooking check the htchome.dll file:
is it signed and has it oem sign 2005?
Click to expand...
Click to collapse
Not signed, and than...
... than?
You should look around and see if you can find a signed version of that file then include it in to your rom.
You can use "Security Configuration Manager" of microsoft to sign a file but then you MUST include that sertificate in to your rom then it will go.
cesconoa said:
Not signed, and than...
Click to expand...
Click to collapse
cesconoa said:
Finally HTC has released the new firmware for P3300 (aka Artemis) in varous languages (I'm italian, so I'm interesting on italian version).
It's not the last OS vesion, but I think it's better cook a firm certified for this PDA than adapt a firm build for other HW.
By now I've removed Extended_ROM, Windows Live, Games (never used) and AutoUpdate, so ROM is stable and very light (53 MB free Storage and 25 MB free Programs).
I have some problem that needs your help:
1) How can I remove software protection (the advice installing a not certified program)???
2) Why "Home Plug" doesn't work??? (Perhaps a protection problem???)
3) There is a patch for MediaPlayer (it doesn't work in stand-by)???
With this community I have learned a lot, I'm sure you know how to solve all!!!
Click to expand...
Click to collapse
3. This should do it
[HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences]
"UnattendedPlayback"=dword:1
"FastCacheReserve"=dword:00800000
"LocalCacheReserve"=dword:00800000
2. try attached htchome.dll
1, your correct with reg key
I knew you are the best!!!!!
Solved 1) via registry key
Solved 2) thanks NikMel and Meschle
Solved 3) thanks Meschle
Now I'm perfecting some installation file, the rom is nearly ready!
PS: do you know how to remove user's suggestions and error reports?
Hello
See attachment, to put in OEM folder to remove security
good luck !
This is the result:
http://www.megaupload.com/?d=8VJVYH00
Something needs to be better defined but it is a good base
Hello did anybody try this Rom? How was it compared to the spagetti cr1 rom? anyway thank you cesconoa!!
caine2it said:
Hello did anybody try this Rom? How was it compared to the spagetti cr1 rom? anyway thank you cesconoa!!
Click to expand...
Click to collapse
The real difference is that Spaghetti is based on "Trinity Lasagna" ROM adapted for using with Artemis, my ROM is only a modded version of original HTC Artemis ROM...
I know the hardware is almost identical, but "almost" is not a warranty...
My rom doesn't want to be the best rom for Artemis, but a good base to create your own ROM...
BYE
Is there the touchflo in this rom ?
cesconoa said:
The real difference is that Spaghetti is based on "Trinity Lasagna" ROM adapted for using with Artemis, my ROM is only a modded version of original HTC Artemis ROM...
I know the hardware is almost identical, but "almost" is not a warranty...
My rom doesn't want to be the best rom for Artemis, but a good base to create your own ROM...
BYE
Click to expand...
Click to collapse
And it's a very good base...well done cesconoa
giggetto said:
Is there the touchflo in this rom ?
Click to expand...
Click to collapse
No, but you can add it
and how i can add it?
ferelo said:
and how i can add it?
Click to expand...
Click to collapse
◄ HyperCore Kitchen ► MULTIDEVICE !!!
cesconoa said:
No, but you can add it
Click to expand...
Click to collapse
I'm not so skilled. If i do that i'll risk to brick the phone.
Could you do it for us ?
Thank you.
giggetto said:
I'm not so skilled. If i do that i'll risk to brick the phone.
Could you do it for us ?
Thank you.
Click to expand...
Click to collapse
I've bricked my phone three times, to recover it you need install original HTC FULL rom that writes bootloader, filesystem, and all the rest (complete resume)
Like you can see by my posts number, I'm not so experienced as Meschle or tom_codon, I'm a user that wants share his experience to realize a good ROM for Artemis in italian...
If you try to build your rom, it's possible you are more able in something and me in some other, adding your experience to mine is the way to obtain a result!!!
BYE
@cesconoa:
only few question:
is this rom bug esent? is it all functionally?
I need a very very light rom and i thing it's a good idea install original WM6 but "lite".
Can you tell me precisely the changes you made in this rom from original?
And what are the value of Storage (and free) and Program (and free)?
Thanks
The sample Kitchen contains a new base rom Diamond_hTC_Asia_WWE_2.01.707.3
Download and full thread at DFT:
http://www.darkforcesteam.com/showthread.php?t=569
happy cooking, bepe
hello bepe welcome back sory to ask
i would like to know were and how can i get the keyboard u had on the v99 rom of urs is it possible u can make a cab for this please i been going crazy for this keyboard u got on that rom
Good to see you!!! Happy New Year.... look forward to giving this a try
Great news!
Very interesting, thank you!
Nice to see you back Bepe!!
the MASTER is back
bepe, excellent work! Trying to cook my rom using your kitchen and all is ok. But when flashing this rom - I have color lines on the screen. Device start to load only after battery remove... After that rom started ok.
Dynomite232 said:
hello bepe welcome back sory to ask
i would like to know were and how can i get the keyboard u had on the v99 rom of urs is it possible u can make a cab for this please i been going crazy for this keyboard u got on that rom
Click to expand...
Click to collapse
This picture is the standard WM keyboard... not sure if you really mean this one, because it should be in your rom already...
korand said:
bepe, excellent work! Trying to cook my rom using your kitchen and all is ok. But when flashing this rom - I have color lines on the screen. Device start to load only after battery remove... After that rom started ok.
Click to expand...
Click to collapse
Hm... this is really looking strange...
Never had this problem, did you do any changes to the display drivers?
bepe said:
Hm... this is really looking strange...
Never had this problem, did you do any changes to the display drivers?
Click to expand...
Click to collapse
No. It's happened only while flashing on approximately 20-30%. Only lines on device screen, but on PC progress bar goes to 100% and device restarted (vibrate). After that I need to remove the battery to start device and it's started normally with flashed rom.
korand said:
No. It's happened only while flashing on approximately 20-30%. Only lines on device screen, but on PC progress bar goes to 100% and device restarted (vibrate). After that I need to remove the battery to start device and it's started normally with flashed rom.
Click to expand...
Click to collapse
The kitchen does not and can not have any effect on the flashing process, so it must be your device I think...
In the RELEASE folder I've used the original RUU files for flashing... this could be the only thing affecting your device... you can try other tools, but the tools in there where working fine for me
korand said:
No. It's happened only while flashing on approximately 20-30%. Only lines on device screen, but on PC progress bar goes to 100% and device restarted (vibrate). After that I need to remove the battery to start device and it's started normally with flashed rom.
Click to expand...
Click to collapse
If this would happen to me, I would flash all parts like Radio SPL and OS again... this helped me once with another problem.... but no guarantee from my side...
:/ why hotlink to a forum that requires registration and then acceptance by a moderator? just upload it here...
bepe said:
If this would happen to me, I would flash all parts like Radio SPL and OS again... this helped me once with another problem.... but no guarantee from my side...
Click to expand...
Click to collapse
I think it's my device problem. On flashing other roms the same Flashing full rom didn't help. Maybe flash memory corrupted?
bepe said:
This picture is the standard WM keyboard... not sure if you really mean this one, because it should be in your rom already...
Click to expand...
Click to collapse
what im asking for is how your keyboard can do this in every layout phone qwerty full all layouts is it t9 ezinput wut is it can u make a cab out of it from ur v99 rom please
wierd becuase it only works with ur rom and every other cooked rom it dont do what urs does like in total cammander for example
this is what im talking about
Hi,
I was wondering if theres a very fast and stable Rom who only has WM6.1 and anymore working with my diamond.???
Thank you very much for your answer
That's exactly what I want, too...a ultra CLEAN and FAST rom with just base system, so that I can install any soft I want.
There are plenty...
Look at the chef's LITE/LIGHT editions. Many of these do not contain Manila.
Chef 'swtos' just released an updated LIGHT ROM with no Manila.
dickenz said:
There are plenty...
Look at the chef's LITE/LIGHT editions. Many of these do not contain Manila.
Chef 'swtos' just released an updated LIGHT ROM with no Manila.
Click to expand...
Click to collapse
maybe this will help more http://forum.xda-developers.com/showthread.php?t=418312
thank you for your answer...
you said that this:
{Mar 4 2009}
WM6.1 WWE CE OS 20764, Build 20764.1.4.3, V2.6 Light, UC Ready
Based on new HTC release V2.03.401.3 (many memory leaks fixed)
Uldr is Reduced, Full Kernel Mode patch included.
Removed: office, keyboards, streaming media, manila, audio player, zip, etc...
Total Storage : 142.63 Mb, Free: ~129 Mb, Total Ram : ~107 Mb, Free Ram : 68.9 Mb (Early Start)
!
Click to expand...
Click to collapse
should the best option?
Im gonna try it when i go home.
If someone has another recomendation please dont hesitate to post it.
Thank you in advance
soylatino said:
thank you for your answer...
you said that this:
should the best option?
Im gonna try it when i go home.
If someone has another recomendation please dont hesitate to post it.
Thank you in advance
Click to expand...
Click to collapse
There is NO BEST option....
you need to see and judge for yourself....just try multiple roms untill you find the one who suits your needs....(the best one for you)
good luck
Regards
Jeroen
I just wanna know if someone was on my situation
I use at the moment AZTORs ROM and i have to said... it rocks! BUt it has to many things that i dont use...
RESPECT THIS ROM ist really good...
It will be really nice to find a rom with just wm6.1 and all BASIC diamond functions, without TouchFlo (Manila) and fast, secure and stable like AZTORs ROM.???
PD: I tried 7 different roms...
I use the UltraLight Morna 1.8 ROM from the great "Carburano":
http://forum.xda-developers.com/showthread.php?t=469852
All roms are available in ITA or WWE version.
It's stable e fast....
Hi guys, I've read the entire internet looking for a solution...!
and I'm not able to find a solution... (probably because of my english skills...)
I've just bought an htc diamond on e-bay and it has installed a non-official rom which it has several troubles: Rom version 1.37.412.2 ESN
I've downloaded the last available rom in spanish (?):
(RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship)
from the htc spanish site but when I try to install it an ERROR[294] : INVALID VENDER ID, comes up. I've read about Upgrading, cooking, flashing and about Hard-SPL, but I'm not sure to understand rightly enough, so here's my question:
What should I do to install the rom downloaded from htc?
I understood that I have the problem because the hard-spl installed on my diamond causes the problem, so I guess I should install a new one...but which one?, and if I'm wrong... where may I find the information to solve my problem? I'm getting nuts of trying so many different things...
Lot's of thanks even if you don't answer, it's been a long read!
jaume600 said:
and I'm not able to find a solution... (probably because of my english skills...)
I've just bought an htc diamond on e-bay and it has installed a non-official rom which it has several troubles: Rom version 1.37.412.2 ESN
I've downloaded the last available rom in spanish (?):
(RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship)
from the htc spanish site but when I try to install it an ERROR[294] : INVALID VENDER ID, comes up. I've read about Upgrading, cooking, flashing and about Hard-SPL, but I'm not sure to understand rightly enough, so here's my question:
What should I do to install the rom downloaded from htc?
I understood that I have the problem because the hard-spl installed on my diamond causes the problem, so I guess I should install a new one...but which one?, and if I'm wrong... where may I find the information to solve my problem? I'm getting nuts of trying so many different things...
Lot's of thanks even if you don't answer, it's been a long read!
Click to expand...
Click to collapse
Maybe this is something for you:
http://forum.xda-developers.com/showthread.php?t=416211
Good luck upgrading
It's not that difficult, trust me...
My personal favourite ROM which sounds like it fits your needs is Suiller's Dia Duit ROM. http://forum.xda-developers.com/showthread.php?t=440683
The beauty of this ROM is that, you simply put all your CABs into a directory on your Internal Storage. On hard reset / flashing, a script will automatically all your CABs for you! There's also a lot of other stuff that can be done (search for tweakPers.mscr in his thread).
nice nice really interesting... thank you people for your tips! i hope we can help someone with the same problem ))
xiaobenxiong said:
That's exactly what I want, too...a ultra CLEAN and FAST rom with just base system, so that I can install any soft I want.
Click to expand...
Click to collapse
ultra clean and fast?
for me is fast o.k.
for ultra clean i can use my ... ähm .. what was the name ... boah, i am thinking but ....
aah its called HANDY
(dont angry, only joke (i hope))
okokur
When you look at people's custom roms, usually the ones without TF3D are called classic, lite, ultra lite, no manila etc.
The other thing you can do is go to settings and Today and remove the TF3D check box. TF3D will remain installed but it will no longer be running. You can get TF3D back by rechecking the box in Today settings.
make a list of no wanted and wishes language and wait a little bit.
you will get than your wishes rom.
Hi
If i flash Windows 6.5 ROM available in this Hermes forum to my hermes (JasJam) and i do not like to keep WM6.5 and want to go back to 6.1ROM.
Is is possible to Flash WM6.1 ROM ?
Can any one answer it clearly about this.Thanks
Yes you can.... If you have Hard SPL V7 then use the SD card method to change rom.
Before you do though, try out Tai_SW's 21109 wm6.1/6.5 hybrid. It doesn't have the titanium today addon or the hexagon app menu. Very quick and no real problems. Pretty lite rom with a large amount of storage space and ram, no games.
Cheers...
Thanks.. i searched but i think the 21109 v10 gloden globe links are no longer there
someone has this in signature and search result no longer provide links
GoldenGlobe V10 by TAI (5.2.21109)
can you post link please for downloading thread?
thanks
Search it here:
http://forum.xda-developers.com/showthread.php?t=461680
as for the Golden Globe:
http://forum.xda-developers.com/showthread.php?t=458456
HTH
Not Golden globe, I believe that is similar to a lot of the newer ones. It was just 21109 wm6.5.
Gypsygirl13 gave you the link, the first one.
Heres the link to the rom I'm using - http://www.4shared.com/file/83529289/5673e8c6/V5_Lite2G.html
and the 3G version - http://www.4shared.com/file/83559388/92966e77/V5_Lite3G.html
Cheers...
Thanks ultra..
ultramag69 said:
Yes you can.... If you have Hard SPL V7 then use the SD card method to change rom.
Before you do though, try out Tai_SW's 21109 wm6.1/6.5 hybrid. It doesn't have the titanium today addon or the hexagon app menu. Very quick and no real problems. Pretty lite rom with a large amount of storage space and ram, no games.
Cheers...
Click to expand...
Click to collapse
can this be done without hardspl..? coz my device already been hardspl before..? do i have to hardspl again before flash it back to 6.1..?
i'm always using sdcard method to flash roms, coz it's lot easier than using activesync, and less brickable (cmiiw)
thank you
METALWORKS™ said:
can this be done without hardspl..? coz my device already been hardspl before..? do i have to hardspl again before flash it back to 6.1..thank you
Click to expand...
Click to collapse
If you have hardspl installed, then you never have to install it again. You can flash any hermes roms. Happy Flashing
I dont see why you would want to come back, but if you for some krazy reason decide to come back... yes its possible.
Hi there, i'm looking for naked 6.5 rom, any cookers can provide it here?
thanks.
yes, here
two in a row, I'm getting good!
for actual help click here:
http://forum.xda-developers.com/showthread.php?t=506533
... "here" is not "there"...?
try Makeveral's Rom
can anyone post a correct link?
ninja.rogue said:
... "here" is not "there"...?
try Makeveral's Rom
Click to expand...
Click to collapse
Thats Right! - BsB 6.5F Black
By far the best 6.5 Rom with over 60MB remaining on booT
Which means u can still afford to install TF3D on top & still have a decent about a program memory left!
kang.t7 said:
Thats Right! - BsB 6.5F Black
By far the best 6.5 Rom with over 60MB remaining on booT
Which means u can still afford to install TF3D on top & still have a decent about a program memory left!
Click to expand...
Click to collapse
Bsb is good but he's askin for a clean rom. if you can wait a little then makk is releasin his new version for clean. full is already out. cclean willl take an hr or so.
click HERE