Very very simple question. ANSWER??? - P3600 ROM Development

I've been using two PRophets and my last adquisition was a Trinity (Qtek S300) - HTC 3600.
The magic question is:
Is there any WM6 ROM (including originals...) that let me USE EMAILS, AND USER PASSWORD without loosing it after a soft reset?
How can everybody uses WM6 with these GREAT bugs?
I don't understand....
Thank you early.

Disappearing wifi and email accounts is a wm6 issue there's some thread about it,just use the search feature.

Thank you, i use to use search as much as you can imagine. No clear response to this problem anywhere. Give me an example.
Examples: Wm6 issue (just take a look.. Nothin related directly. so much ****)
WM6 Bugs--> Nothing.
Maybe i don't know how to search...
So, finally (for future people who use SEARCH...):
Is this a bug, and there is no solution. We have to **** up with it, dont we?

Nothin related directly. so much ****???
Come on give me a break.
Let's see if this helps you:
http://forum.xda-developers.com/showthread.php?t=317868
[!] For prevent password and account dissapearing u should (you should make this procedure immidiatly after first soft reset ):
1. Set up your connection settings
2. Open IExplorer / Set up Ineternet connection / Open some internet page
3. Click Disconnect button to close internet connection
4. Hold power button and turn off your phone
5. Power on your phone.
After that procedure your password wont dissapear. I think that you should repeat the same for mail account (set up mail account / try to send or recieve your mail / hold disconnect button / turn off your phone)
Thanks to mun_rus

Yes. trought your first search link i founded that.
I'm gonna flash just now and try it. It'll impress me. After so many months... a solution
Sorry dude i'm bad tempered.
Thank you.

Ok. Done those steps: Doesn't work.
After first soft reset (With stylus) everything ****s up again.
Nothing solved. You 're lying me

Sorry man.
It works for me......I can't help you though

there are many threads....
http://forum.xda-developers.com/showthread.php?t=342269
http://forum.xda-developers.com/showthread.php?t=317868
http://forum.xda-developers.com/showthread.php?t=327147&highlight=disappear
http://forum.xda-developers.com/showthread.php?t=350866&highlight=disappear
http://forum.xda-developers.com/showthread.php?t=330967&highlight=disappear
http://forum.xda-developers.com/showthread.php?t=320459&highlight=disappear
http://forum.xda-developers.com/showthread.php?t=340885

problem only occurs with super-CID devices right?

Syquus said:
I've been using two PRophets and my last adquisition was a Trinity (Qtek S300) - HTC 3600.
The magic question is:
Is there any WM6 ROM (including originals...) that let me USE EMAILS, AND USER PASSWORD without loosing it after a soft reset?
How can everybody uses WM6 with these GREAT bugs?
I don't understand....
Thank you early.
Click to expand...
Click to collapse
Dont know with CIDs devices, on my Triny that never hapens to me, I m using now Mary 3.6 and is working fine...

I personally never encountered any problem with disappearing stuff after poking the reset hole on my non-SuperCID Trinity - but then it's actually quite seldom for me to poke that hole anyway since the cooks here produce quality roms. When I need reset, I usually did it the soft way.

THE solution !
Syquus said:
I've been using two PRophets and my last adquisition was a Trinity (Qtek S300) - HTC 3600.
The magic question is:
Is there any WM6 ROM (including originals...) that let me USE EMAILS, AND USER PASSWORD without loosing it after a soft reset?
How can everybody uses WM6 with these GREAT bugs?
I don't understand....
Thank you early.
Click to expand...
Click to collapse
My solution:
1. Always use power off->on reset
2. NEVER use hardware reset (stylus reset or remove battery)
3. If some installation program asks you to reboot, ALWAYS say NO, and power off->on yourself
4. If your Trinity halts for some reason (maybe ATI video chip bug), and the power off button does not work, just bind the Button 1 (Hold) to <Soft-Reset>. It always WORKS!
And you settings are there after.
I just used to live with this bug.
Maybe gurus can help with this issue, maybe not, maybe it's hardware malfunction, and it's time to change HTC to some other brand
BR
Milen

Related

O2 XDA IIs, unleashed.

Hello people
I just got a new XDA IIs from O2.
This thread will hopefully serve purpose to all other new users of the XDA IIs as well.
I just got it and wondering how I can get the best of it like all you lot. You all seem to know quite a lot about it.
Here are the details I managed to pull out from it.
ROM version: 1.31.00 WWE
ROM date: 12/03/04
Radio version: 1.06.00
Protocol version: 1337.38
ExROM versiom: 1.31.139 WWE
Windows Mobile 2003 SE
Version: 4.21.1088 (Build 14132)
Processor Intel(R) PXA263
Bluetooth for Windows CE
BT-PPC/PE Version 1.0.0 Build 3500
I beleive I need to update this to the latest of whatever is out there. I dont know what good they would do to the PDA either.
From reading some of the posts here on the forum, I managed to find out about Battery Pack Pro v2 and ewallet. These are the only 2 software I installed. Oh yes, I got hold of serial keys for both of these so anyone who needs the serials, your problem is solved. Just sent me a msg.
Futhermore, I have installed the GPRS monitor which I cant find much use of.
Other software:
Skype
Macromedia flash player
FonixVoiceDial
I have beebn browsing on the GPRS alot as well, I would apreciate confirmation that GPRS on o2 is free.
I was wondering how to upgrade the windows media player 9.
As you all can see, I just got it and trying to get the most of it. Any help would be apreciated. All the newbies check the thread as much as possible, someone is bound to help.
I just purchased a backup copy of tomtom 5 from ebay for a few quid (not original apparently). He is shipping it soon. The guy claims its unlocked etc. I hope I can make it work. Any advice?
I will purchase an SD card and bluetooth receiver soon for tomtom. Anything I need to know before I do ?
I was wondering what games I can put on it as well. I can come up with so many questions. I have been looking at other posts as well. For instance, fixing the camera drivers for better picture quality and playing an MP3 as a ringtone. These threds are started where the problem arises rather than how to do it from scratch, so a bit lost there.
I am just looking for some free advice. God bless.
First off ditch the O2 rubbish that came with the phone ( the active interface) it will reduce the number of times it crashes - hard reset then when prompted select Corporate user and enter 0506 as the key. As for TT5 it works fine with my O2XDAII2 but NOT with bluetooth GPS - I use bluetooth for my headset and found it terminated the GPS when I hang up from a call - now using a wired GPS and BT headset its all fine. As for MP3 as a ringtone put it on the PDA nav to it in file explorer tap and hold then from the pop up box select "set as ringtone" - works fine for me. You do have the latest firmware / OS as far as O2 is concerned, others can comment if this is any good or not. One other tip if when you make a call or answer an inbound there is no one there - i.e. you can't hear anyone, select bluetooth on then off and re-make the call - don't know why it does this as its real anoying - Finally had two bills from O2 since I got my XDA and neither had any charge pertainin to the use of GPRS, and I was using it but not too much as I use WIFI its quicker and free in my local pub!! mike
Hey and thanks for responding.
So you reckon a hard reset wout fix the crashes eh, I'll have to try that, just that I installed a lot of stuff on this and would need to purchase an SD card to do all the backup. All in good time though.
I tried out what you said about navigating to the MP3 file and then holding down choosing SET AS RINGTONE thing, there is no such option on my set. Maybe some sort of driver needs to be installed?
Thanks for the tip for the GPS wired set. I will definitely go for that. I am using the Nokia bluetooth headset, do you think I should switch to Jabra BT250?
Can anyone comment on the ROM updates?
What is Radio? What does that mean?
Alitech,
Have a read through this first:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Thanks for the link. I have checked it out. I will take it slow with the updates, dont want to muck up you know.
You seem to have all the latest Roms installed. Well done.
alitech said:
Can anyone comment on the ROM updates?
What is Radio? What does that mean?
Click to expand...
Click to collapse
radio is the software that turns the pda into a mobile fone, also functions the bluetooth, tho i am led to beleive that, so someone correct me if i am wrong,
you are on o2's rom of 1.31.00 WWE, you seriously need to upgrade, but not on an o2 rom, i would suggest an upgrade to 1.40, but only if you dont mind playing with it, cos first timers tend to need help after they cannot get it to startup again, lol, many a time i have helped people after this, lol, but imate 1.40 is a good rom, which i use and it is as stable as it is ever going to get, there is no o2 rubbish, altho i did like it, it is pointless when it creates more harm than good. bluetooth will work better, but only for sending files and so on..... as it will upgrade to BT 3900. oh and wm10 which is an added bonus,
i have heard on the other hand that people have had problems with this rom, but so far, ive had it about 2-3 months now, and its never given me a problem!!!..so best to read wiki and browse the forums for 1.40 rom questions.
if you decide to upgrade to a better rom, and need help, just ask us on here and we will be happy to help.... or pm me and i sort you out.....
joey. 8)
Thanks for your offer joey. I will definitely send you a pm once i have read all that needs to be read. I will check out everything in detail.
I dont think any other phone compares to these customizable mofos. We rule.
I have found the O2 interface makes the IIs very unstable. There are threads that give details of how to remove it, but I have attached a text file giving the sequence. This does not need a hard reset at any stage, so you can keep all the software you have already loaded.
If you do at any time need to hard reset the O2 interface is automatically reloaded and so you will need to go through this process again.
missing attachment from last post
Give up here is the text instead!
O2 Active GUI removal
O2 seems to have been trying to make it more difficult to remove it this time, but once you get it cleared out the unit operates a lot faster.
1) Remove "connection.exe" in the "Windows/startup/ folder
2) Remove "xpdr_02" in the Windows/fonts/ folder
3) soft reset
4) Unistall "O2 Active UI"- note this will fail, but it gets rid of some items
5) Soft reset
6) Either from your PC, using ActiveSync or on the XDA IIs using file explorer, remove the entire "Mobile Solutions" folder from the windows/ folder.
7) Unistall "O2 Active UI" again - which again will fail, should this time advise program removed but again will indicate some items not removed
8) Remove the entire "ms" folder from the windows/ folder which should now be empty.
9) Soft reset
10) Check "remove programme" in settings to make sure that o2 active UI no longer appears in the list
11) Clear at last, well not quite. There is still a registry entry lurking that can be removed using "remover" or similar.

Damn GPRS sometimes works and sometimes doesn't!!!!!!!

Aaahhhhhhhhhhh
Can anyone help please?
I am running a PDA2K with i-mate 1.4 roms and radio 1.13.
Sometimes after a telephone call my GPRS fails to connect.
As I have Smartner push email on my phone this is a REAL pain and means I need to reset my device in order to re-establish GPRS and hence email.
THIS HAPPNES 4-8 TIMES A DAY!!!!!!!!!!!!!!!!!
Any ideas for a fix out there please?
Cheers.
Robin
I've got this problem too. But i don't know how to make it work correctly!
Every time i need to reconnect the GPRS.
And i realy doesn't like it!!! :evil:
Try this chaps. I have applied the registry tweak and now I keep GPRS on all the time.
HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\(GPRS connection name)\AlwaysOn
Just change it from 0 to 1.
(GPRS connection name) is, of course, the name of your GPRS connection, and I'm not sure if that GUID is the same on
every machine or not, but I only had about 5 GUIDs under Providers, so it shouldn't be too hard to find.
Fatzzz
_________________
This kinda sounds familiar to when I was last using my PDA2K about 6 months ago.
Okay.
HOW do I make this change please?
I have no idea how to do it?
Cheers.
Robin
Dude you need a PPC registry editor. I use EdReg.
Very similar to a normal windows registry editor.
Fatzzz
I have found something like that there: HKCU\Software\Microsoft\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\Providers\(GPRS Connevtion name)
But there is no key named "Always on"!!...
Well you have got further than I have.
I download PHM Registry Edit.
I opened KKEY_LOCAL_MACHINE then Comm and the only 2 options that start with a C under there are:-
Cellular Line and CXPort?????????
Is it something I am doing wrong????
Robin
Robster said:
Well you have got further than I have.
I download PHM Registry Edit.
I opened KKEY_LOCAL_MACHINE then Comm and the only 2 options that start with a C under there are:-
Cellular Line and CXPort?????????
Is it something I am doing wrong????
Robin
Click to expand...
Click to collapse
Try to use "Find"
I did a search on Providers.
NOTHING FOUND?????????
Robin
Robster said:
I did a search on Providers.
NOTHING FOUND?????????
Robin
Click to expand...
Click to collapse
Try ConnMgr!
NOPE.
Nothing.
Now I am getting really worried.
Either I am doing something very wrong or some of my setup is shot to peices.
And yet apart from this disconnect issue the phone is working fine!!!!!!
Robin
Okay.
It DOES help to check one of the check boxes asking for the kind of data I am looking for............. Dohhhhh
Well I found it under Microsoft.
I Have the following:-
Vodafone Internet
Vodafone MMS
Vodafone WAP and
Vodafone WAP CSD
NOTHING that says GPRS?
Any more ideas?
Cheers.
Robin
Robster said:
NOTHING that says GPRS?
Click to expand...
Click to collapse
so did i!
Hi
So no-one can help with this problem?
Looks like I am not the only one suffering and I am not the only one who cannot find the appropriate setting that needs to be changed?
Cheers.
Robin
GPRS problem
From another post someone indicated that in the new rom build its a problem with the caller ID program, and that downgrading this will help the issue:
Here is a step by step instruction:
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is OK. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
Hope that helps someone, I have downgraded to the 1.22 rom which does not have this issue, but I am considering trying to upgrade to 1.40 and try this as a workaround to the gprs not able to reconnect issue, except after a soft reset or flight mode on/off cycle...
Many thanks.
I am off on holiday tomorrow so don't want to do anything that I cannot repare very quickly in case I have no phone while I am away.
I will give this a try on my return.
If anyone else tries this and is succesful please let us know.
Cheers.
Robin
GPRS Problems and caller Display
I too have been having problems with GPRS connecting once and then not again until a soft-reset or turning the phone off - on top of which caller display was slow and would often hang. (This is on an Alpine) I have succesfully downgraded the caller-id app and the GPRS problems have completely disappeared - on top of which, the app responds quicker, does not hang at all, and responds quicker on an incoming call. All in all, a result!
One note of caution - I had a password on my machine, and after renaming the files and doing a soft reset (as per instructions above) my Alpine would not restart. I had to to a hard reset! if you have a password on yr machine, disable it before you do the downgrade. The GPRS issue was really my only problem with my XDA, and now I'm a happy bunny. :lol:
Im just had to install this. Will see if it will be ok. I'll let you know.
I installed yesterday.
Seems to be working a treat.
EXCELLENT.
Many thanks for all the help.
Robin
Robster said:
I installed yesterday.
Seems to be working a treat.
EXCELLENT.
Many thanks for all the help.
Robin
Click to expand...
Click to collapse
Hi Robin - Glad to hear all is ok.. I notice that you're running the i-mate 1.40 ROM.. Any thoughts of updating to the 1.42..?
Cheers!

Lets get a head start on B&B 4.0 release issues

I have been thinking about this for a while so I will go ahead and get it started. We all know that Tom_Codon is currently working on V 4.0, and as always he will thoroughly test it before release. I thought maybe we could, as a community, come to a conclusion on the fixes for the upcoming rom.
We all know the problems such as
1. Dialerpad not working for redial( green button) different dialerpad fixed
2. Flashing issue that was resolved.
3 HTC plugin going to vibrate during appointments- not a rom problem but an issue
4. Weather for "your town"- not a rom problem but an htc server issue.
We need to get together a complete set list,if you will, of known issues so that these bugs can be worked out before the Rom hits "production".
PLEASE, dont turn this into a request thread. Lets make an effort as a community to help Tom, put out the best Rom of his ability.
I have talked with him recently and he feels that the Touchflo is working flawlessly, but this is going to be a completely new build, from a new version of windows 6. So there MUST be some test time
I think as a group we can pitch in and give some targets to look at, via our experiences with 3.7
On another note, many people have donated to Tom, but the truth of the matter is more have not. I understand that times are hard, for some, harder for others, but we should look at it like this, If Tom wasnt doing what he was doing, along with others like him(none have released anything as complex and mature as Toms) werent doing what they are doing, you would already be in the market for another ppc, some, like here in America, having to pay upwards of $550.00 like myself.
Some of us appreciate the hard work of others and are willing to cough up $ without much proding, while others just download and go. I myself am guilty of such actions, I mean I do have and have had a usenet account for about 3 years, and have used bit torrent since it was in command prompt days(bit commet anyone) but I do recognize hard work and a love for what one is doing, so please make Tom feel your appreciation, this guy is having to go way out of his way to do research for us, due to internet issues, so please donate to Tom's work. Drink one less caramel mociado,beer or coke for that matter and send some $.
Back on topic.
Please help by posting any known issues with 3.7 so 4.0 can be tested properly, Thanks.
I agree with 1 to 4 in the previous post, also, the dialer writes text in green, this is very hard to see and suggest changing to white text.
5. Dialer text changed to WHITE for easier reading
Another Issue
First of all Congrats to Tom for making the bes PPC a million times better.
I had some issues, besides the redial button some programs crash my machine, for example yahoo go 2 and others.
Also the machine sometimes restarts itself with programs like tomtom and google.
Thanks for all your hard work!!!!!
5 good point, I am sure that will or has been changed already
yahoo go... what others, lets try to make a thorough list
6. Inclusion of TouchFlo cab
(The dialpad was really a big issue in my friend's phone i upgraded, so had to go back to B&B 3.0)
Thanks for all ur great efforts Tom!
I fully agree with post 1.
The only thing that is not working for me is the camera.
Gpsphoto is not working for me. Gps is not turning on.
And the colors of dailpad. They are now green but difficult to read.
White is much better.
For the rest it runs perfect.
But please Tom take your time.
And guys the rom is for free so donate to Tom. Mobile Telco's have to pay Microsoft for this update. And we get this for free.
I haven't donated as well but i will this week.
There is a workaround for GPS Photo. Just change to main memory as storage. Then restart the camera and off you go Nasty thing is that you have to do this every time you want GPS photo. It's a ROM issue and has nothing to do with Tom
[email protected] said:
5 good point, I am sure that will or has been changed already
yahoo go... what others, lets try to make a thorough list
Click to expand...
Click to collapse
Hi all,
my only (not so big) problem in B&B 3.7 that I wonder to be solved in the new version is the camera delay problem, when I push the button it takes about 3-4s for the camera to take te photo.
The other issue is pics destination folder. My old ROM saves the photos to \storage card\my docs\my picture, that was very nice, this new camera saves the photos to a specific folder, it's not a big problem, just annoying...
By the way the B&B 3.7 is the best rom what I've ever tried, so Tom, appreciate your work...
Hi!
I don't know if I'm the only one, but when I desactivate the WM5storage apps by clicking on "desactivate", it runs TOMTOM automaticaly!
It can be a bug...
@++
TraXer.
Taking a picture in 3.7 takes about 3 seconds.. Still can't fix that..
Wi-Fi issue
Hi @all,
the B&B 3.7 is the best ROM i ever had. Thanks to Tom.
I've an issue with the Wi-Fi start/stop.
I can start and stop Wi-Fi with the comm Manager but if I start Wi-Fi I could not stop Wi-Fi over the Wi-Fi icon on the Headerbar.
Normaly there is a link if you click on the icon [Turn on Wi-Fi] if its off and [Turn off Wi-Fi] if its on.
I have always [Turn on Wi-Fi]... also if its on and if i click, nothing effects.
I don't know if someone else solve this problem and if its a bug.
Cheers
[email protected],
First of all, i would like to express my eternal gratitude for tom who is doing a great work. People like you makes the community better and better.
I have another issue:
when using de X-Button, the rest of icons of the heather bar doesn't show properly. The signal power of the operator displays only left half and he volume icon doesn't show.
make a contact picture also does not work: not file is saved after shotting
Agree
I agree with you and i would like to donate to tom. But i need account information, i don´t use paypal.
However i have not been abel to use Tom´s 3.7 ROM at all. No problem flashing it but my sound on bouth, my HTC P3300 goes balistic (like if my botton was stock)..
This has happend everytime i tryid this ROM and i tryid it on my too. P3300 and my body´s too..
So i haven´t realy enjoyed the ROM at all.. just tryid it and shiftet to the new WW3.7 Original (which works flawless on my phones)
.... but still i would like to support the great work and research Tom is doing.. Please make it possible by posting som account information so i can transfer a donation to you Tom
i only tried 3.7 for a short time because i had the battery drain problem, and the redialing problem was getting on my nerves.
however, there were 2 problems (or 2 times the same) that i also have in v3.0 (german version):
wlan and gps connections cant be deactivated using the taskbar icon. the "bubble" always says "no connection".
for wlan, i use connection manager to disconnect. that works perfectly. to stop a gprs connection however, i have to switch to flight mode and back...so:
7. (or whatever) would be nice to have a more confortable way of disconnecting gprs than using flight mode...
to stop a gprs connection however, i have to switch to flight mode and back...so:
Click to expand...
Click to collapse
I haved the same problem but after looking close all the app (like msn messenger) who use Gprs Data and with com manager you can stop it ^^
More problems, possibly unreported?
I have a couple of issues with 3.7, and I don't think I have read about them anywhere else.
Firstly, this may be a problem with the Comm manager. Sometimes I turn the phone to "off" in Comm. Manager, and then when I click again to turn it "On", nothing happens - the code lock keypad is supposed to show but nothing happens at all and I have to soft reset.
Secondly, after a soft reset, MSN contacts do not appear in the list when you login, and you must chage accounts to see them again
I also had the more common problems with green button and HTC home screen vibrate mode.
Also would it be possible for us to have Windows Update inlcuded in the ROM?
Excellent ROM though by the way! Will be donating very soon!!!
Tristan
morpheustfw said:
I haved the same problem but after looking close all the app (like msn messenger) who use Gprs Data and with com manager you can stop it ^^
Click to expand...
Click to collapse
yeah, you are right. i just tested what you said, and indeed: the "Datenverbindung" button in comm manager (i got german version) will eventually light up when i switch to conn manager and a gprs connection is active. but it takes something between 3 and 10 seconds for that button to light up. that's why i never saw it.
but waiting for the button to light up then clicking it will indeed cancel the gprs connection. i am cool with that. thx for the hint.
Actually this started as a B&B 4.0 issues thread...
but i really would like to thank the person who open it because i had the opportunity to see all the bugs of previous versions in one place....
Thanks again...
Many thanks to Tom as well for his effort..
Looking forward for v 4.0
I believe we are on the right track, but I feel some of theres issues are problems do to the base OS..I will later update my most and include a pool to see where we stand as far as how may people are experiening these situation.

I'm probably solved the ActiveSync popup issue !!! Please try it...

My procedure like a well known old "fake server" method.. with little addition...
Here goes:
1) Open Active Sync
2) Click on "Menu" and select "Configure Server..."
3) Enter false info in the server address / user name / other details
4) In the "Edit Server Settings" tab "Deselect" all (Contacts, Email, Calendar, Tasks) settings.. Finish settings..
5) Click on "Menu" and select "Schedule..."
6) In BOTH drop-down menus select "Manually"
7) Enter "Adjust peak times" and "Deselect" all days...
8) Click on "ok" and then close Active Sync.
9) At last, install "Elias Async Killer" for stop activesync when unplug cable or disconnect bluetooth activesync session...
10) Soft Reset...
That's it...
"Don't delete" fake server in this method.. It's not affect or conflict your regular activesync sessions with this settings..
This is work for me.. Sometimes activesync started by some programs (like tomtom7, igo8 etc..) ..in this case simply close it.. Dont worry.. It's not our famous "Activesync issue"..
Please try this method and report your results..
If it's work we are handle a big Diamond issue...
Sorry for my poor English..
ummm i must be missing something here.. if i enter fake info into the server than my real info is gone...
craigwillie said:
ummm i must be missing something here.. if i enter fake info into the server than my real info is gone...
Click to expand...
Click to collapse
If you are using exchange server, pushmail or whatever necessary livesync, this is not for you
It's only work for local activesync sessions unfortunately..
I posted this on udKs Syrius ROM thread:
Try it let me know if it works
Greetings.
Sergio PC said:
Alright guys I think I solved the stalker active sync problem try this:
Use task manager from fdcsoft v2.9.
-Go to notification
-You will see 3 items that say: repllog.exe.
-Select the one in the middle then press on the lower part an icon that looks like a paper with a pencil, its the 4th icon starting from the left. Click on it.
-On the part where it says EVENT check if it says: The system time changed.
-Change this "The system time changed" to "Turned AC power on".
-Reset device.
-No more stalker activesync.
Although it might apear on fresh boot, but once you close it thats it no more activesync.
Hope this helps you guys out, I tried this on a different ROM, but see why not this shouldn't work on udKs.
Greetings.
Click to expand...
Click to collapse
Sergio PC said:
I posted this on udKs Syrius ROM thread:
Try it let me know if it works
Greetings.
Click to expand...
Click to collapse
sometimes even this doesn't work...
How did some cooks get rid of the active sync pop-up "thing" in their roms? If I remember correctly, Panosha for instance, did solve this problem...i mean, they could tell if they wanted to...i guess
Htc86 said:
How did some cooks get rid of the active sync pop-up "thing" in their roms? If I remember correctly, Panosha for instance, did solve this problem...i mean, they could tell if they wanted to...i guess
Click to expand...
Click to collapse
Not all cooks hide secrets. Actually this problem is easy to solve. Cooks just need to replace the 4 sync*.dll from a working build before cooking. This will solve all your headaches. No need fake servers and stuffs like that.
423 view and no comments about thread aim !?!
Come on guys, please report your results..
Is it work or not ?!?
Thanks for the tip, Vic...you're the man
I really appreciate the input from the cooks about those "unsolved" problems, because, we, the users, would need so much more time to straighten these issues, while even on the other hand, just a little hint from the cook can make big impact, whatsoever...i really don't understand, why wasn't there any advice from the cooks who did solve it...with all due respect...
SergioPc's solution didn't help async to go away in my case, really.
sergiopcs method worked for me on udk rom
Reason4444 said:
My procedure like a well known old "fake server" method.. with little addition...
Here goes:
1) Open Active Sync
2) Click on "Menu" and select "Configure Server..."
3) Enter false info in the server address / user name / other details
4) In the "Edit Server Settings" tab "Deselect" all (Contacts, Email, Calendar, Tasks) settings.. Finish settings..
5) Click on "Menu" and select "Schedule..."
6) In BOTH drop-down menus select "Manually"
7) Enter "Adjust peak times" and "Deselect" all days...
8) Click on "ok" and then close Active Sync.
9) At last, install "Elias Async Killer" for stop activesync when unplug cable or disconnect bluetooth activesync session...
10) Soft Reset...
That's it...
"Don't delete" fake server in this method.. It's not affect or conflict your regular activesync sessions with this settings..
This is work for me.. Sometimes activesync started by some programs (like tomtom7, igo8 etc..) ..in this case simply close it.. Dont worry.. It's not our famous "Activesync issue"..
Please try this method and report your results..
If it's work we are handle a big Diamond issue...
Sorry for my poor English..
Click to expand...
Click to collapse
Ummm... Am a lil lost here..The activesync issue you referin to.. is the one wher it automatically pops in the background.. right ??!?!
If thats true.. Doesnt elias active sync killer application take care of this on its own ?!?!..
Or is this issue somethin entirely different !?!
Dpakrawal said:
Ummm... Am a lil lost here..The activesync issue you referin to.. is the one wher it automatically pops in the background.. right ??!?!
If thats true.. Doesnt elias active sync killer application take care of this on its own ?!?!..
Or is this issue somethin entirely different !?!
Click to expand...
Click to collapse
Elias Active Sync killer does not always work.
However, I tried the method suggested by the OP and it works. Thanks.
Vic5870 said:
Not all cooks hide secrets. Actually this problem is easy to solve. Cooks just need to replace the 4 sync*.dll from a working build before cooking. This will solve all your headaches. No need fake servers and stuffs like that.
Click to expand...
Click to collapse
Anybody has a link to this .dll file !?!?!..
Dpakrawal said:
Ummm... Am a lil lost here..The activesync issue you referin to.. is the one wher it automatically pops in the background.. right ??!?!
If thats true.. Doesnt elias active sync killer application take care of this on its own ?!?!..
Or is this issue somethin entirely different !?!
Click to expand...
Click to collapse
Elias Actsynckiller close real (!!) Activesync sessions when it over (unplug usb cable or disconnect bluetooth connection..)
But it's not work for spontaneus (!!) Activesync pop up ...
.
.
anyway, 945 views and still counting... Nobody respond about suggested method, "work" or "not"..
Sergio PC said:
I posted this on udKs Syrius ROM thread:
Try it let me know if it works
Greetings.
Click to expand...
Click to collapse
Works perfect for me, thanks. You can change the value in fact in almost everything you like (i changed it to something like 'on pc name change' or something like that) and it did the trick also )
dutch64 said:
Works perfect for me, thanks. You can change the value in fact in almost everything you like (i changed it to something like 'on pc name change' or something like that) and it did the trick also )
Click to expand...
Click to collapse
sergiopc method didnt work for me, using beta4 udks rom.
i just accepted that not all methods work and just made the activesync exclusive!
Reason4444 said:
...
anyway, 945 views and still counting... Nobody respond about suggested method, "work" or "not"..
Click to expand...
Click to collapse
I've read through this thread and I'm still unsure about what issue it's supposed to solve...
Could you clarify the issue please, then I will try the fix on my Diamond and report back on whether it works.
Davey101 said:
I've read through this thread and I'm still unsure about what issue it's supposed to solve...
Could you clarify the issue please, then I will try the fix on my Diamond and report back on whether it works.
Click to expand...
Click to collapse
There are two issues with active sync...
1) when you connect your device to the your computer (via usb cable / bluetooth) and active sync starts automatically... but when you unplug or disconnect active sync does not stop automatically.. you have to do it manually..
The solution for this is elias AsyncKiller.. once you install it.. it kills the active sync conenction when you unplug the device from the computer..
2) sometimes, even without you connecting your device to any computer.. active sync pops up and runs in the background.. it does not sync anything but just keeps running in the background..
This solution given in this thread is for this problem..
Dpakrawal said:
...
2) sometimes, even without you connecting your device to any computer.. active sync pops up and runs in the background.. it does not sync anything but just keeps running in the background..
This solution given in this thread is for this problem..
Click to expand...
Click to collapse
Thanks for clarifying! I already use AsyncKiller and I have never had this second problem with any ROM.
Davey101 said:
Thanks for clarifying! I already use AsyncKiller and I have never had this second problem with any ROM.
Click to expand...
Click to collapse
Lucky you..
What rom are you using ??...
I also never had it in the rom i have been usins from quite sometime... But have suddenly started facing it.. Must have cooked somethin rom..

GPRS problem unsolved

Hi,
Im using unlocked T-mobile MDA pro 64mb phone with WM 6.1 (build 19960.1.1.8 TML)
The problem is that when I connect to GPRS, Internet explorer, outlook and most of the internet softwares (opera browser, google maps etc...) don't work. Internet explorer stops at loading. outlook says synchronization error. But, a few softwares like IM messenger, some trading software work fine. The problem occurs only when on GPRS. Everything works fine on wifi.
I have been facing this problem since I have unlocked the phone and flashed it for the first time. I have flashed for several times with various roms. initially it works but soon problem reappears. hmm.. Problem did not appear in WM 6.5 (but phone is hell slow. So, im forced to remove it). Further the problem is not network specific as I tried on various networks.
Guys please help me.. I searched a lot on internet and it seems like no one is facing this type of problem in the whole world except me
(Except this: social.microsoft.com/forums/en-US/windowsmobilephonesandaccessories/thread/64977e4f-c8ba-482a-9845-c1d80f88fd71/)
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Simon_WM said:
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Click to expand...
Click to collapse
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
naveensakhamuri said:
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
Click to expand...
Click to collapse
http://www.filebox.com/alhaque/3o6u8gdlfy6j
Also if you want to chnage the radio:
http://forum.xda-developers.com/showthread.php?t=600933&highlight=Challenge
thanks
Hi!
thnx for ur reply... I'm desperately waiting for it...
Any how I tried this... as usually it worked fine at the beginning and problem repeated again. The new development is that the application which I said to be working previously (IM messenger etc...) are also now working now...
Very much frustrated about this issue as I'm unable to find the background reason for it . Even the XDA forums cant help it....And the worst part is that warranty is not going to apply as I unlocked it..
Yet no solution...
info?
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
kalya said:
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
Click to expand...
Click to collapse
Hi
Thanks for your suggestions.
Im using airtel network. and all those settings are already set on my phone.
Yes. I accept that my problem is weird. Thats the reason why I'm unable to find a solution for it.
Yet... I'm testing by changing various roms and still no success.
every time the problem repeats on 2-3 usages of gprs.
When I use opera browser it says that "I have some problem in settings". What to do I've checked those settings for hundreds of times and further if there is a problem in connection settings then why the heck it worked for the first few times?
Some stupid suggestions
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
kalya said:
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
Click to expand...
Click to collapse
Hi
I did every experiment I can think of.... Including testing this sim on other phone or testing the other sim on this phone.
I even tried flashing the original T-mobile rom.
I also tried to find if the programs I install has something to do with the problem...but found none of it affects.
As you said it may not be a rom problem.
If it fails to work completely then I can guss some thing about the origin of the problem like rom or hardware or whatever...
As it is working well initially, I don't understand where exactly the problem lies...
have you done a doc-format? sometimes that can get rid of very peculiar problems.
-Jonny- said:
have you done a doc-format? sometimes that can get rid of very peculiar problems.
Click to expand...
Click to collapse
Hi
Is the process of using mtty and task 28 55aa command what you call doc-format (sorry for ignorance)?
Then I've already did it...
anyway thanks for your suggestion...
I think the real culprit is activesync. anyway I have to do some tests and confirm.
To clear my doubt I decided to conduct a small test. I factory reset my system for three times to check the gprs connectivity...
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc + pairing up + synchronizing problem reappeared.
second reset:
1. GPRS worked flawlessly.
2. On connecting to pc by pairing up problem reappeared.
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc without pairing up problem reappeared.
So, this strengthened my assumption that the problem is with active sync.
I cannot confirm so easily...
Further I would use my phone with out connecting to PC for 3-4 days and check if problem reappears.
Then I would check it by connecting to a different PC. Then I can confirm whether the problem is with active sync of my system or the phone...
By the way, today is the second day of my testing without connecting to pc and no issues detected till now
folks,
Today on the fourth day of my test, I conclude that connecting to my pc creates the gprs problem. No Idea how and why...
suggestions any one?
anyhow I would connect my phone to a different pc and check out if the problem is with my pc or with the phone...
no suggestions?
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
wovens said:
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
Click to expand...
Click to collapse
Hmm..Im sure that I deleted all the older files.. anyway let me I'll try this registry procedure... thanks for your suggestion

Categories

Resources