I don't know if this is normal functioning or not.
When I am playing music, and then say, unplug the headset, I get 0 sound. No music, no movie sound, no phone dialing sound, can't hear anyone speak, no ringing, nothing. Have to soft reset to get any sort of sound back.
Is this normal?
Also, anyone think that a Polaris based rom on a tytn II would have issues with the wired remote? Because my tytn II on Polaris build rom is not allowing me to use the buttons on the device, but I can still get sound. All other roms work fine, I wonder why this polaris based one does not agree?
I get that too, that is really annoying, I am going back to dutty v3 tmr !!
Hey he is doing v4b which is going to be based on v3 and not the v4 polaris rom, so it should work with hsi new v4, since it works on his v3
and i discovered the reason why there was no soudn when i unplugged the device was because of SRS surround or wahtever app that is.. once i disabled that i could plug in/out the headphones anad have sound.
Related
I tried to set up a set of BT Stereo Headphones in a shop the other day to test them. We couldn't get them to go so we could listen to mp3s. I use GSPlayer.
Has anybody done this successfully? How do you tell the Magician (WM5) to output the sounds to the bluetooth headset and not to the normal headphones audio output socket?
many thanks,
Zaine.
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Bewdiful.
Bewdy mate.
Thanks very much, that seems to do the trick. It works with my normal headset now. I'll go back to the shop now and test those other headphones.
The auto toggle seems to work OK as well, btw.
Once again, thanks a million.
Good deal. I gotta try this out. Will this work w/ the Wizard?
It doesn't work with my Magician + BHCS BT Patch...
I've read plenty of threads about this. For Magician, A2DP is WMP only. Doesn't work with anything else.
Mind you, this is what everyone else has said. I have not tested this myself.
I can confirm that, in my experience.
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Ik am succesfull with the standard WMP though. It plays all bitrates, and only rarely stutters... So when I use WMP, I am satisfied!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Nice triple post! But...
bobgorila said:
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Click to expand...
Click to collapse
Yeah, I got this all the time, espically if I fast forwarded and rewound. And I was re-encoding mp3s to different bitrates, constant and variable without much success.
"Damn WMP and it's lack of features! The stupid thing can only play MP3s... and... WMA..."
I did a few test re-encodes to WMA 9 (not 9.1) @ 192 and now I get those burps and crackles every ... ten minutes? Half an hour? Definitly not every... what, twenty seconds to a minute.
If this is a problem for you, try re-encoding to WMA 9 @ 192. I use dbPowerAmp http://www.dbpoweramp.com/
ooff! took me about 2 and 1/2 days to re-find this thread again!! can we get a sticky on this????
used this on my Wizard (aka mda) and my Moto H3 and now can listen to my tv shows on the train w/my bt headset!
thanks!!!
I got a Unable to Open bluetooth audio gateway or something, though my headset is connected...strange.
blue tooth program
thefrioman said:
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Click to expand...
Click to collapse
There is three icons one for audio off and one for audio on and one for toggle.
I ran one at a time but after 15 or 20 minutes I loose blue tooth connections and the communications manager freezes and when I click on the blue tooth Icon in settings it does nothing, I have to turn the mda off and then I can listen over the blue tooth again, but after 1or 20 minutes it does it again.
can you help?
help
is there any one out there
BT Audio User Problem
I downloaded BT Audio and installed the three .exe files on my 8525. Soft reset the device and then toggled the audio on.exe. Sound still coming out of the speaker and not the BT headset.
I do have the BT-620's and they work fine (even before the BT Audio install). I am trying to accomplish being able to listen to WM without having to lug the BT-620's around all the time.
I am wondering if having the 620's software is conflicting with BT Audio?
Also, I think to get the audio stream to play to the headset, one has to activate the voice dialing feature from the headset? I can get the sound to play only for a few seconds when I do this. Do I need to de-activate voice dialing? If so, how?
Thanks and Happy Holidays
Wokring great with Plantranics voyer 510
Thanks for such nice software....it is working great in my mda and voyer 510 bluetooh head set.
imate JAM Arabic
Please I am needly imate JAM Arabic for Rom 1.12.00WWE .
Please help me .
and thank's for every .
NIce
Thank you so much, toggle works well, switches to calls and back
very cool.
Well, being that this is my first post, I would first like to say that this site and forums are top notch, I have had my 8525 for about a month now and have learned an immense amount of knowledge in a short amount of time thanks to you guys. Now for my problem...
I have my 8525 running Black Magik, radio 1.43.00 and have recently purchased a pair of Sony DR-BT21G A2DP stereo headphones. Now I was a bit weary about buying these since I have seen no mention of them on these forums... buy anyways. When I first paired the devices together I was able to listen to music without problem, though sound needed to be tweaked. After trolling for quite some time through the forums (yes, the search feature works great) I found what appeared to be the best A2DP setting for audio quality, and now after playing with every possibility cannot get music routed to the headset, phone calls work without a hitch. I have downloaded BTAudio to route all system sounds to the headset but It doesn't seem to work. I toggle BTAudio on and I can hear slight static through the phones but the audio still comes out through the system speaker. I have played with A2DP settings in both pimp my black and HTweakC but have not had any success. I am planning on reflashing Majik tonight to attempt to set it up from scratch, but I was wondering if anyone here could shed some light on this issue? Thanks in advance.
Freeguyad said:
I have my 8525 running Black Magik ... A2DP stereo ... was able to listen to music without problem ... cannot get music routed to the headset ...
Click to expand...
Click to collapse
Delete the pairing. SR. Re-pair. Should do hte trick. Better yet - for the most stable ROM and A2DP tweaked for the best sound "out of the box" - reflash with Sleuth255 variant of LVSW ROM.
How exactly can I delete the pair? I can repair the device but have not seen an option to remove it?
To toggle Audio to A2DP you might want to see:
http://forum.xda-developers.com/showthread.php?p=1485391#post1485391
There's a description and a link to download the CAB for A2DPToggle plugin too.
Let me know how it works on your hardware.
Heya,
for a long time i have been looking for some decent bluetooth stereo headset.
now it has come down to two models. well, actually one only
my choice: motorola s9
and the second possibility: Motorola T820
from reading the comments on amazon on those devices i realize that my phone needs to be A2DP compatible to get the best sound out of the headset.
i use s2p as music player and i know it is A2DP compatible... but is real question is: is my phone (HTC P3300 WM6) compatible with this tecnology
also: if you can suggest any other good headsets, please do so.
key features i seek:
- able to use on my phone and pc
- a2dp
- good sound and microphone quality
a2dp not working
Hi,
I have HTC artemis. I recently purchased wireless bluetooth stereo headsets (Jabra bt325)
I cannot connect it to use as wireless stereo. Its working fine as handsfree. After pairing, I cannot see wireless stereo option. Its Greyed. I know that artemis is A2DP compatible.
But i am sure that headset is fine because I tested it with n95 and it worked fine.
Please give me a solution.
Try this:
Start - settings - connections - bluetooth - and add new device
If your headset is already added, use your stylus and press on the bluetooth headset name until the following menu comes up:
Edit
Delete
Set as Hands-free
Set as Wireless Stereo
Choose no. 4
yes it is.
I'm using Dopod M700 which is the P3300 w/o the GPS module.
It works with dell BH200 BT stereo headset and also the o2 BT stereo earphones.
It works on joint stereo in WM5 and since its now running WM6.1 its real stereo.
Dell BH200
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
sameerbs said:
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
Click to expand...
Click to collapse
might be a specific problem of your headset model.
i use a motorola s9 and it's quite nice. fits nice, does not disturb after hours, controls work fine, calling works fine...
BUT (and there's always a but) it has some major drawbacks i found out. while it's still nice to listen music without wires, i encounter this problems. which MIGHT be due the phone, not the headset... but i have no way to test that.
so, basicly, P3300 + motorola S9 through A2DP:
- insides works like a charm. phone in my belt, headset on. music cuality nice with some small music interrupts every now and then (maybe once per 5 minutes). phone calls nice and i can hear and they can listen me well.
but my oh my when i get on the street...
- constant music interrupts every 15 seconds. i have hang the phone around my neck so it's where my chest is to not get interrupts so often (still get one every 2-3 minutes)
- as the mic is where the ear is, if i have a call, it's impossible to hear me due the background noise. this also applies to the underground/metro. it's not that bad in a bus
and well. without A2DP enabled my music player uses so little resources the phone still works fine...
if A2DP is enabled, the phone gets REAL slow and the battery drain is MASSIVE.
when this motorola S9 break... i'll get another model to test. and when that breaks i'll probably get back to some nice wired ones (unless the CPU issues and the battery drain on the phone gets solved) ... but maybe i actually change the phone before that happens. who knows.
I have not seen this before, and currently only happens with my Tilt 2 (Stock WM 6.5 ROM). My old Cingular 8525 and AT&T Fuze (Stock AT&T ROM) continues to work just fine.
What happens is I activate bluetooth on my Tilt 2, pair up my Jaybird Gear headset (JB-200) and activate it for "Hand free" and "Stereo Audio". Everything is connected and looks good. Now as soon as I turn on any audio player (e.g. Pocket Player, Core Player or Media Player) the "Stereo Audio" connection immediately drops away and the sound comes through my phone speaker. The "Hands free" portion remains active and works just fine for calls. I've tried multiple ways to get the Stereo portion to to stay connected, with or without AVRCP control, and nothing seems to work.
I tried searching here on XDA and Googling this problem but either my particular combination of headset and phone is not being used anywhere else or it's just me.
Any ideas? The only thing I haven't done is a hard boot. I may just go to a AT&T store and try another phone just to see if it works there or not.
Update: Looks like the same thing happens even on the display models over at the AT&T Store. I guess that means it's not my phone per sey. I guess other possible option is that these particular headphones are not compatible with WM 6.5. or there's a glitch in this particular bluetooth stack. Can the WM 6.1 stack be used in WM 6.5?
Update
After talking with Jaybird Gear it appears that they have also become aware of this bluetooth issue.
Jaybird Support:
"Thank you for contacting Jaybird online support. Yes, Their is a compatibility issue we recently became aware of with the At&t Tilt. There is no way for the present time to fix the problem. We are working on it with AT&T to try and find out what the problem is and why that specific upgraded model has this problem.......It is a software problem with the Tilt so most likely they will be able to correct the problem with the next upgrade that AT&T releases"
This could mean a long wait if we're expecting AT&T to fix this problem.
I don't know if this applies to only Jaybird Gear headsets or not.
I post this here because if there's any community out there who could figure this out it is XDA.
Seems like other folks might be having some problems as well.
Here and Here
Sprint Touch Pro2 has stereo bluetooth wierdness too.
The Bluetooth settings show the Motorola HT820 as Stereo Audio and Hands-free in green, and the stereo audio from Coreplayer plays through as high quality, but I can't use the buttons on the phone to move to the next track, stop, or start the audio. Instead it starts the audio on the Sprint Music Player and doesn't affect Coreplayer. That's not how it worked on my Sprint Touch.
I have the same issue on my VZW TP2 with my Plantronics Voyager 855. Didn't happen on 6.1, but it happens on 6.5. Soft reset usually gets the audio flowing over the AD2P again, although I once had to do a hard reset to get it back. That was a drag. Between this and the limited AVRCP support, and the poor car integration performance on the TP2, I'd say the BT stack on this device needs some real work!
I just want to add in that I'm also searching out a solution to the same type of problem. My combination is is AT&T Tilt 2 using a Jabra Dog Tag (BT3030) headset. I had no problems with my old Tilt 1, but now the sound remains perfect but the control buttons on the headset are funky. The track buttons bring up my today screen, the play/pause does nothing but scan through all songs if held down, and everything gives me the "bluetooth volume control not supported" message...
Lots of strange bluetooth issues with this phone. My Blueparrott b250 headset will attach just fine but then the volume is WAAY too loud. If I press the volume down on either the phone or the headset it goes to almost silent. Press down again it's slightly louder but still quiet. Down again and loud but on the quiet side of where I like it. Down again and it's silent. Strange. Also, there's no separation of phone volume and headset volume. If I get it close to what I want then the phone it too quiet. I'm just hoping one of the geniuses around here solves this soon.
i have bought new samsung hm1700 and it plays all my music perfectly and doesnt play the assigned ringtone of the phone
it plays its own midi tone and not the tone i have assigned to my phone!!
pls help!!
i am using galaxy s 2
Same problem...but issue is w/ android bluetooth in general
I have the same problem:
When phone (a plain ol SGS Vibrant running ICS Passion v13) gets an incoming call, my ringtone of choice does not play. Some other 2d ringtone sounds off. My bt device is a Blunote speaker (not headset), and my phone is using internet-only calling via a wifi connection. These last two pieces of info seem to be irrelevent, based on the OP, but thought I'd include for completeness.
ICS Passion doesnt have an interface yet for profiles, but if someone could point me to a manual conf file or such in android 4, that might be the problem, I'd be most grateful...
thx