Develop Bugs

stereo bt but mono sound

iam currently using latest rom from dopod and motorola 820, although the two earpiece have sounds it is only mono, can someone help to make it stereo? o recomend what rom to use, thanks

In order to have stereo audio on a Bluetooth device, you need a profile called A2DP, which is currently only supported by the latest Qtek Universal ROM at the moment:
ftp://xda:[email protected]_Updates/UNI_QTEK_13077_176_10900_WWE.exe
Dopod has not released a ROM supporting A2DP yet.

thanks for the help, God bless

No problem. Do let us know whether it works well or not.

it works, i have stereo sound, but need improvements, in a song the bluetoth stops 3 to 4 times when playing, the player dont stop its the motorola 820 that stops several times.

I did come across a post with a patch for the A2DP flaw the other day. It's somewhere on this site - do a search and see if you're lucky.

Found it: http://forum.xda-developers.com/viewtopic.php?t=46811&highlight=universal+a2dp
It worked for me for a little while so try it.

Hi,
I have used A2DP a lot with my JasJar the last 4-5 months, and had written a summary of my experiences with this "lag/stuttering"-issue in another thread here...I have copied the most essential of that text below...might be usefull info for you;
-----------------------------------------------------------------------------------
It seems to be two major factors affecting this "stuttering"/"lag" (from my experiences at least...I have used A2DP a lot with my Universal...couple of hours every day);
1. Universal struggling outputting(RAM/CPU...or both!?)
One help here is to apply the registry "A2DP priority" fix (found it in the forums here...and so did richardlai).
Another is to close all programs before using it (I usually do not do this...I usually only do it in hindsight when I get the problem).
2. Signal between Universal and headset struggling (obstructions between Universal and headset, WiFi nearby, so forth)
I for example get this problem if I put my Universal in my trouser pocket (I know, I must have big pockets, and walk around, I get stuttering/lag occationally. If I then take it out, and hold it in my hand farily still when I walk...no stuttering. I have found, that when I walk, it is Ok to have it in my backpack/rugsack...then for some reason it very rearly stutters...so I usually do that.
But when I walk of the bus at work, and walk into the "campus" of my workplace, which is cramped with radiotransmitters (is norways largest Telecom company)...I get a lot of stuttering, and need to take it out of backpack, and hold it in my hand, at it gets a lot better.
In short: A2DP with the Universal works, but is sensitive to disturbance/obstructions/moving around...and to make it worse, it is also sometimes dependant of the Universal itself struggling with CPU/RAM. So you can not totally get rid of the problem...but you can do a lot to minimize it...I almost never experience it now...except in the campus-area at work that is.
I have BTW had the exact same problems before with Qtek 2020 and Qtek9090 (which I got hold of some "A2DP patches", when I had those devices). ...but I really had a LOT more stuttering with those two...so much so, that I never used A2DP with them on a daily basis.
-----------------------------------------------------------------------------------
I also wrote a short post on my experiences with the different stereo headsets I have...yes, they actually act a little bit different it seems (regarding resume/pause button, and how easy/automatic they "reconnect"). You can see it here; http://forum.xda-developers.com/viewtopic.php?t=47977
Hope this is of some help for you!

RonnyGydar: I came across your little summary a little while ago and have done the registry fix, but the problem still exists! Do you think altering the value in some way would help?

richardlai,
I added the registry value manually...found a reg-file (or was it a CAB-file!?) that supposedly should add it...but when I checked later the key was still not added in the registry?
So I added it manually.
BUT, I do still have the problem...but that seems to be radio interference/distance so forth...since when I hold JasJar in my hand and don't move it around, I NEVER have an problem. ...and actually fairly rearly when I have it in my rugsack/backpack.
With 1 or 2 exceptions...where it lagged "all the time"...but then a soft-reset cured it.
So if you have this problem with your phone lying in front of you on the table...then it really sounds like it is the JasJar/Universal that IS the cause (and not interference)...and yes then the registry hack should help.
BUT I have not done any real testing of the effect of it...I am not sure how much effect it really has...all I know is that I had a "lot of problems" with lag before...and now I almost never have it.
...I hate those "diffuse" problems...when it is impossible to measure in a "scientific" way that "this cures it", and "this do not"! :-(
Sorry about the "little help" I give here...but this issue is a bit "fuzzy"...I have gotten it enough under control to that it isn't a problem any more (during a 1 hour workout, I will typically get this gap/lag 0-2 times...and that is not a problem for me...at least compared to what I experienced 6 months ago, where I was lucky if I could hear 10 seconds without any problems).

The stuttering problem seems to be permanent now... Luckily I have a HP hx4700 (which has a Broadcom bluetooth module) and works perfectly with my Jabra HT620s. Anyone using an A2DP ROM other than Qtek? I'd like to try a different ROM to see if it would make a difference.

only a second of sound
i use the qstarz bt stereo headset (http://www.qstarz.com/products/bh-q392s.aspx) and it works fine for phonecalls, but when i set it for wireless stereo and start a media player (TCPMP, WMP, Pocket Player...) i mostly only get sound for one second and then it shuts up. the players keep playing, the buttons on the headset can pause, resume and change tracks but there is no sound at all.
i get full wireless stereo playback occasionally, but i can't figure out what differs from time to time.
i applied the above patch with no success. anyone has a thought on the matter?
Ariel.

richardlai said:
The stuttering problem seems to be permanent now... Luckily I have a HP hx4700 (which has a Broadcom bluetooth module) and works perfectly with my Jabra HT620s. Anyone using an A2DP ROM other than Qtek? I'd like to try a different ROM to see if it would make a difference.
Click to expand...
Click to collapse
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
edit:
I use the latest OFFICIAL Qtek 9000 WWE ROM. (Without the ExtROM though ) And i did not use any patches regarding A2DP or Bluetooth.

this is what i tried, many times. i get the activesync sound, sometimes from the speakers, sometimes in the headset, but almost always only one second of sound afterwards.
i found that by pairing the headset to the universal by pressing and holding the green button on the headset untill the universal recognises (doesn't take long) gives better results.
pairing it by the instructions of the headset (putting it in discover mode, and then searching for a device with the universal) will give me the one second sound almost every time.

Biffert said:
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
Click to expand...
Click to collapse
Well, this has ALWAYS been the sequence I use (and I don't think you can do it in any other way). The real problem here is either the buffer memory or processor load.

richardlai said:
Biffert said:
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
Click to expand...
Click to collapse
Well, this has ALWAYS been the sequence I use (and I don't think you can do it in any other way). The real problem here is either the buffer memory or processor load.
Click to expand...
Click to collapse
Then there is no A2DP problem, the only solution is to lower the overal systemload. Stop all programs you have running, disable every today plugin that need frequent updating (memory, battery meters etc.) Free up as much RAM as you possibly can. I have AT LEAST 16 mb RAM free when playing music via BT.

Bluetooth Headphones

I recently purchased a pair of Iogear wireless Bluetooth headphones to use with my Fuze. I went through the process of pairing them, and managed to get them to connect. But when I tried to use them with listening to music or making a call, they would not work.
Anyone else have a problem or a clue as to why they won't work?
The phone supports both A2DP and AVRCP.
Hope this is in the correct section.

I'm unsure on why it won't work. I have some Plantronics Pulsar 590A and they are top notch. I use it with my 8525 (Hermes) and the sound quality is great. Also, Plantronics does a great job on their warranty.

I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.

hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.

hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.

addicus said:
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
Click to expand...
Click to collapse
Yes I do this to for this particular problem. The soft reset required problem is something different - Not sure yet what causes it - I think that it is an app that I run every now and then that causes some kind of conflict even after it has been shut down. Still have to figure it out

mzshortay said:
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
Click to expand...
Click to collapse
Have you been successful in connecting other bluetooth headsets to your device which worked?

hotrod101 said:
Have you been successful in connecting other bluetooth headsets to your device which worked?
Click to expand...
Click to collapse
Oh yeah. My bluetooth headset, Plantronics umm forgot the number works with the Fuze. This is a mystery to me

Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)

hotrod101 said:
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
Click to expand...
Click to collapse
Okay, I'll do that, but it doesn't even work with using them to make a call.
There's a built-in mic on them, so it should work with that as well. It says it's connected, but the lil headphone icon never shows up when I turn them on.

Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works

hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
If this doesn't work you may wanna RMA yours and get a new pair. If that doesn't work, then you may wanna step up to a more expensive pair.

hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.

mzshortay said:
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
Click to expand...
Click to collapse
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.

addicus said:
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
Click to expand...
Click to collapse
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.

mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Cool beans shortay! Stay around XDA Dev.

mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Glad they are working now for you.

okay, so I may need you guy's advice. It seems as though they only work once and then i have to delete them from the phone, then discover them again. Could it be a defect in the particular headphones I have, or the model not working with my Fuze? Maybe I should RMA these anyway?

Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.

hotrod101 said:
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
Click to expand...
Click to collapse
This is a great idea! If you find out the problem is with the headset - RMA them. If not, dig deep in that Fuze forum and see if you guys can figure out a fix.

HD FM Radio - Headset Button Control

Does anyone have a solution as to how to change the FM radio Channel through the Headset Call button??......currently i can only do it on the HD unit itself.
Any solution or link would be nice.
Thanks

hi,
It would be great if someone could reply.
Even I am looking for a similar solution, but for music player.
Currently when i hit the button more then once, it starts calling the last person on my call history.

shah1237 said:
hi,
It would be great if someone could reply.
Even I am looking for a similar solution, but for music player.
Currently when i hit the button more then once, it starts calling the last person on my call history.
Click to expand...
Click to collapse
Try these:
http://forum.xda-developers.com/showthread.php?t=498349
http://forum.xda-developers.com/showthread.php?t=492947

Thank You.
Finally got something resolved.
I really like the phone, but stupid things, either due to Microsoft or HTC really makes me wonder why cant they get it rite like apple.
I really miss the sensor on i-phone, but as its windows you always have work arounds.
I am using pocket shield. Its good, but still misses one good option.
When the headset is inserted, you cannot disable the answer hard key.
I am trying to check, if there might be any application that can help me with that.
Apart from that the battery life is a bit bad rite now.
I have disabled all the bells n whistles like bluetooth, wifi, active sync,push notifications. but still dont know, why it is still lacking.
One thing I havent tried, is the option to switch off the device,
But the problem is that you have to press the power button everytime to bring it back, then swipe to unlock.
Phew... I knw to many complaints..
But luckily, its a easter weekend, so can search the net to make my phone perfect... heheehheheheh........

Let me know if you find something which changes the FM Radio preset stations with the headset button.

sure. will post rite here.

Even though this is 2 years after the previous post, it may help to say I would also like to have 1 button control for the FM Radio in my Android - ver 3.3.3 Samsung Gio.
If you know if an app has been created in the past 2 years, please let me know.

Soln:Change Music tracks Via Default Headset
shah1237 said:
hi,
It would be great if someone could reply.
Even I am looking for a similar solution, but for music player.
Currently when i hit the button more then once, it starts calling the last person on my call history.
Click to expand...
Click to collapse
Dude i am having Moto G.
For Changing Music Tracks Via Default Headset in Moto G-Follow Below Procedure:
1.)Become Developer first-google it.
Please find Snapshot attached.
2.)Now install Premium Headset Button Controller APK.
Link:http://www.datafilehost.com/get.php?file=c2500322

Best blue tooth headset.

Anyone to recommend a good Bluetooth headset, a set with music controls 3.5mm jack for your own earphones and a display that would display the id3 tags or file name. Of course be able to answer calls.
I'm using a Nokia one at the moment but its not very responsive, dunno if its because of the old Bluetooth 1.0 compatibility.
Sent from my HTC Wildfire using XDA App

Sony MW600.

Thanks for the recommendation, so I bought a set after reading positive reviews. Connection was easy and very quick and responsive. But one fault is that the phone itself starts ringing on incoming calls the and some signals through the headset. Weird doesn't happen on my old slow unresponsive BT headset (Nokia) at least the phone didn't ring just signals through the headset bit embarrassing when your phone goes off and you answer on a BT headset.
Any settings that could fix this?
I have resetted BT pairing and the headset but still same.
Anybody use this with wildfire?
Sent from my HTC Wildfire

Are you using any custom roms? I remember that cyanogen rom has some options about ringing in headphones, if I am not mistaken.
Also, did you test it on another phone to see if it's behaving the same way ?
Sent from my HTC Wildfire using XDA App

I am using Wildpuzzle 0.8. Checked media and phone audio is connected. Have tried it on a Nokia and same thing happens. Can the headset be updated or something? My way round is to mute the phone when I connect the headset but this is so inconvenient when sometimes I forget to reenable sound.
Sent from my HTC Wildfire

I use these and they are great.
product 172052 on misco.co.uk (I can't post outside links)

MasterDL said:
I am using Wildpuzzle 0.8. Checked media and phone audio is connected. Have tried it on a Nokia and same thing happens. Can the headset be updated or something? My way round is to mute the phone when I connect the headset but this is so inconvenient when sometimes I forget to reenable sound.
Sent from my HTC Wildfire
Click to expand...
Click to collapse
Try this: Do a nandroid back-up and flash CM7. See if the problem still persists.
If not... I`m out of ideas. Maybe try to get a refund?

I have read many threads with same complaint, now realising It's a feature of most new smartphones (dunno whether its just android or not) that phone always rings with Bluetooth headsets just in case for some reason you take out your earphones for some reason.
I'm a little reluctant to switch to cm7 waiting for it to be stable first.
Sent from my HTC Wildfire

MasterDL said:
I have read many threads with same complaint, now realising It's a feature of most new smartphones (dunno whether its just android or not) that phone always rings with Bluetooth headsets just in case for some reason you take out your earphones for some reason.
I'm a little reluctant to switch to cm7 waiting for it to be stable first.
Sent from my HTC Wildfire
Click to expand...
Click to collapse
I think it`s normal for a phone to ring via the speaker even with the headset connected. Maybe they just need to add an option for it.
I meant testing CM7, not switching to it completely. A 30 min job to test CM7 and restore nandroid.

Hi
Just got the MW600 as well, very pleased so far.
I have the same issue, phone is ringing as well - whereas it does not really bother me.
There are few things not working well for me, so I was hoping to find here some feedback:
- No Song titles are displayed (not so bad since it is normally clipped in a position where you can not easily check
- the call-button does not work to call somebody, only to take a call
- the play button does not automatically start playing HTC music - but worked with Winamp and Songbird
Any suggestions ?

Original Rom (l have 2.2.1 nie) have Sound quality issue over a2do. HTC support said, I must wait for next update (when they may be fix it)
Sent from my HTC Wildfire using XDA App

I'm having an issue with my Plantronics 903+ Bluetooth Headset. They pair and play's music fine , but it cuts out quite alot if i move about. Honestly if I have to sit still I may as well get wired headphones.
I am CM nightly's (71) with the latest radio flashed.
Any help is greatly appreciated.

Hello,
i use Jabra BT3030
http://www.productwiki.com/jabra-bt3030/
3 years of working, without any problem

Ok, I really start to like the SE MW600 a lot
If you get a call music stops and you can take the call with one button.
Double tapping the call button re-calls the last person you phoned - works good as well.
But I am still not having the ideal media player
Original HTC music player fails to start up automatically when you tab the music button
- but next song/pause works well
Songbird opens automatically, next song/pause/... works well but searching in a track not and it is rather heavy making the phone really slow
Winamp is probably the best, but I still think it is too heavy
Does anybody knows a good light media player with bluetooth support ?

gpgeza said:
Hello,
i use Jabra BT3030
3 years of working, without any problem
Click to expand...
Click to collapse
I rely like the credit card size
Now i will just need to find a suitable motorcycle helmet -come in all types of handy with speed camera app`s

reply
The best headsets I came across was from soundID. They have really great stuff
______________________________________________

The best headsets I came across was from soundID. They have really great stuff
Click to expand...
Click to collapse
you are right ^^

Thanks for Your help!
Thank You guys for your help. I read thread and finds it useful.

Sony Ericsson MW600

Has anybody tried and got the Sony Ericsson MW600 to work? I can listen to music and it is seen as a music headset but no calls? it will not connect as a hands-free phone-kit?
I tried to shuffle through all the blue-tooth and connections settings but I can not find any solution?
Any help is very appreciated.
Robert

Robert_it said:
Has anybody tried and got the Sony Ericsson MW600 to work? I can listen to music and it is seen as a music headset but no calls? it will not connect as a hands-free phone-kit?
I tried to shuffle through all the blue-tooth and connections settings but I can not find any solution?
Any help is very appreciated.
Robert
Click to expand...
Click to collapse
Hello Robert_it.
I've bought it today before seeing your post.
It works as bluettoth headset with calls.As i can remember it shows two devices when you search for bluetooth.I choose the second and it works ok.The problem is how to set bluetooth on phone to be always on .

Hi nsourm,
Thanks for your reply.
This is my second SE Bluetooth I also had the prevoius non-OLED one and loved it.
I have paired up the audio with 2 phones and my Laptop and started up by pairing the second phone..
What I did not know is that you shuffle the Phone and the audio seperatly as I was not using the first on with 2 phones. So it was all down to finger trouble
To activate what audio you want long-hold the "play/pause" button and select (I knew that one) to shuffle the Phone, long-hold the "talk" button to select the phone you want.
This way you can hear music from any of the 3 devices and connect to any of the 2 phone's separately
I did just asume that I was connected to both phones at the same time??
Not a big problem, I still love this little player
The conclusion must be, as in most cases, if in doubt..... READ THE MANUAL!!!
Robert

Robert_it said:
Hi nsourm,
Thanks for your reply.
This is my second SE Bluetooth I also had the prevoius non-OLED one and loved it.
I have paired up the audio with 2 phones and my Laptop and started up by pairing the second phone..
What I did not know is that you shuffle the Phone and the audio seperatly as I was not using the first on with 2 phones. So it was all down to finger trouble
To activate what audio you want long-hold the "play/pause" button and select (I knew that one) to shuffle the Phone, long-hold the "talk" button to select the phone you want.
This way you can hear music from any of the 3 devices and connect to any of the 2 phone's separately
I did just asume that I was connected to both phones at the same time??
Not a big problem, I still love this little player
The conclusion must be, as in most cases, if in doubt..... READ THE MANUAL!!!
Robert
Click to expand...
Click to collapse
Unfortunately nothing found in the manual.Can you help me?

Help you with what?? what do you need to know???
There is a online manual on the Sony Eriksson web site but it is not the best
I will try the best I can if you mail me!
Robert

Robert_it said:
Help you with what?? what do you need to know???
There is a online manual on the Sony Eriksson web site but it is not the best
I will try the best I can if you mail me!
Robert
Click to expand...
Click to collapse
Thanks a lot Robert
Found the solution.
I remove all the apps from task manager auto kill and now it is working perfect.
Thanks again for your help

Track names
Hello:
Does this headset show you the track names?.
Mine doesn't show them at all. Also, if someone calls me, it only shows the number, but not its name.

Whipon said:
Hello:
Does this headset show you the track names?.
Mine doesn't show them at all. Also, if someone calls me, it only shows the number, but not its name.
Click to expand...
Click to collapse
As far as I know this is a well known compatibility problem between Android and these headsets and I heard both the problems you describe are fixable. Have not found the time to google this yet though... if I find something I'll let you know.
Nevertheless this is a great headset with virtually no weaknesses other than its lack of water resistance.

redThd said:
As far as I know this is a well known compatibility problem between Android and these headsets and I heard both the problems you describe are fixable. Have not found the time to google this yet though... if I find something I'll let you know.
Nevertheless this is a great headset with virtually no weaknesses other than its lack of water resistance.
Click to expand...
Click to collapse
Well, I bouught one from ebay but I still don't have the Atrix with me. I only expect I will be able to volume up and down, answer a phone call and change tracks.

redThd said:
As far as I know this is a well known compatibility problem between Android and these headsets and I heard both the problems you describe are fixable. Have not found the time to google this yet though... if I find something I'll let you know.
Nevertheless this is a great headset with virtually no weaknesses other than its lack of water resistance.
Click to expand...
Click to collapse
Couldn't find any fix for this issue.
But you're right, its a great headset ^^.
@joyo22
It does all of that, plus you have a fm radio. You can also fast forward or rewind.
Great buy.

Whipon said:
Couldn't find any fix for this issue.
But you're right, its a great headset ^^.
@joyo22
It does all of that, plus you have a fm radio. You can also fast forward or rewind.
Great buy.
Click to expand...
Click to collapse
Thanks man! Now I'm happy with my future purchase...

joyo22 said:
Thanks man! Now I'm happy with my future purchase...
Click to expand...
Click to collapse
It is an excellent accessory and works perfect with Atrix, I have it and do everything
1. identifies the incoming call
2. The FM radio works perfect
3. open and change the songs on the cell
4. autonomy is very good load
5. sound quality is good
6. the charger is the same cell so stay with 2 chargers.
Among others it is a good buy I recommend it