No GSM - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi all,
I've installed Schap's 4.22 Rom on my 8525 but it says no GSM. I then installed a radio rom and the phone goes into bootloader and bricked. I then unbricked it but I can't seem to installed a radio Rom into this phone. I tried to installed AT&T shipped Rom and it won't work, again it goes into bootloader and bricked and I have to unbricked it again. I am getting very frustrated. Does this happenned to anyone here. PLEASE HELP!
Thanks.

another victim.
http://forum.xda-developers.com/showthread.php?t=349461

?
What radio did you have before you flashed to 4.22 there have been some question of the newer radio's possibly causing no GSM here are a couple of links with a lot of info hope this help's to recover your hermes.http://forum.xda-developers.com/showthread.php?t=349461 and
http://forum.xda-developers.com/showthread.php?t=286755
good luck bro
The Reaper

Thanks but I've went thru those posts and a lot of them had the same problem that I had and most of them agreed that it's a hardware problem. No matter what rom you installed it won't installed.
This really sucks.
Thanks.

What radio were you using and did you have hard spl 7 flashed and here is another thread to try http://forum.xda-developers.com/showthread.php?t=286755
good luck brother hope you get her back

Related

Got a problem

Hello and good day to you all.
I have a bit of a problem and i was wondering is someone could help.
Recently flashed my phone using schaaps 3.54 also did the hard spl now says
ipl 1.04
spl 2.10.olipro
Very happy with the outcome but the camera stopped working (Twice this has happened now on second phone), so i need to send the phone back to orange. Everytime i try to go back to the orginal rom (downloaded from the orange website), the phone goes into bootloader and then then nothing PC says it has lost connection with the phone.
Guess what im asking is how do i put the original rom back on, or cant I. have searched the forum but either im blind or i didnt use the correct search words. Any help would be very greatly recieved.
Thank you
Andy
andyd358 said:
Hello and good day to you all.
I have a bit of a problem and i was wondering is someone could help.
Recently flashed my phone using schaaps 3.54 also did the hard spl now says
ipl 1.04
spl 2.10.olipro
Very happy with the outcome but the camera stopped working (Twice this has happened now on second phone), so i need to send the phone back to orange. Everytime i try to go back to the orginal rom (downloaded from the orange website), the phone goes into bootloader and then then nothing PC says it has lost connection with the phone.
Guess what im asking is how do i put the original rom back on, or cant I. have searched the forum but either im blind or i didnt use the correct search words. Any help would be very greatly recieved.
Thank you
Andy
Click to expand...
Click to collapse
www.mrvanx.org - you'll be wanting gthe WM5 downgrade guide.
Forgive me for being stupid but when it says i need a rom does this have to be the original one that i use with it
how do i find the nbh file the rom i have downloaded is an exe file
lol ignore last post just worked that out right click the exe file and extract lol
Thanks for the link got it sorted now and have learnt something this afternoon. cheers
Rang orange told them camera is black and they are replacing phone tomrrow morning
did yhou downgrade the hard spl too?
lol dont ask me complicated questions lol how do i do that?
im currently updating it from the orange website with there update hopefully that will do it?

My Herm200 can ony be flashed to Black Satin

Every other rom that I try either fails at 12% or 82%. I cant use HardSPLv7 or HardSPL. I've reached my the conclusion that my device will for ever be bricked. I started out with a No GSM error and I end up with Black Satin which is really stable but it doesnt help that I have no radio flashed to it. I refuse to cut my loses. Anyone that can be helpful I would greatly appreciate it!!!
Herm200
Black Statin
no radio NoGSM error
IPL-1.04
SPL- 2.10.olipro
Thank you C Brown
Have you tried flashing the HTC Official Rom with radio?
Try flashing back to the official ROM from your carrier...and the flash different ROM
Sounds like the Radio has been corupted.
Have you checked here
http://http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
I'm thinking you need to flash a radio back onto your device. Most if not all of the Cooked Roms recently don't have a Radio included. So, try upgrading the radio. From what I know, flashing a Rom with HardSPL on your device is fairly safe but the Radio is where things can go wrong.
Maybe you should visit the Hermes Upgrading forum and ask the guys there, look at the Sticky's.
I wonder how you lost the Radio? Did you try to upgrade it or did it just disappear?
I bought the phone bricked it had a No GSM error soo I figured I could fix it. Ive been working with wizards for sometime and I've never been able to not recover one. So Ive tried about 4 different radios all of which either fail for error 260 or 262. I've tried from both the os and bootloader. I had schaps newest rom and black satin and both of which ran fine but still no radio. Every OEM base rom I've tried fails at 82% its strange. I've read on other message boards that the only fix is to swap the boards. I dont believe that. I also tried Mtty's set 14 0
task 8 with no avail. I'm thinking if I down grade to WM5 and find a stable radio any radio for that matter and try to work up the ladder back to WM6.
Herm200
IPL-1.04
SPL-2.10.olipro
Black Satin rom
GSM error so no radio
Try using the V3 Unlock then flash it may help.
http://forum.xda-developers.com/showthread.php?t=293665
Also its HTC branded its a straight TYTN its not bound to any carrier. So it should be sim unlocked but hopefully the Cid can be unlocked which could be the hang up during rom and radio changes. Thank you all for you advice all of it will be noted and tried out later today.
So I successfully Flashed Pandora to my phone but still no radio

some1 please help

I have read and read and read. so I have a telus diamond and I cannot flash hardspl 1.4. I tired xp and vista. I ended up flashing 1.57 (comonex?) and I tried flashing the radio and it didn't work. I try flashing 1.40 but it gives me communication error and an enterbootloader error on the device. any ideas before I smash this thing?
thanks
what did you do? maybe you describe step by step what you did and what was the result
megagprime said:
I have read and read and read. so I have a telus diamond and I cannot flash hardspl 1.4. I tired xp and vista. I ended up flashing 1.57 (comonex?) and I tried flashing the radio and it didn't work. I try flashing 1.40 but it gives me communication error and an enterbootloader error on the device. any ideas before I smash this thing?
thanks
Click to expand...
Click to collapse
make sure your using the CDMA hard spl and not the GSM
your also required to have .net CF 3.5 installed in order to flash hard spl.
where is the cdma hardspl? isn't that unsigned_1.4 hard spl... from the tutorial?
I flashed 1.57 on it and its hard to even get into the boot loader with the volume down/reset. sometimes it doesn't boot and just vibrates. sometimes it boot into wm6.1. I hardly can ever get it into bootloader then when I do and I flash a radio 1.0.5.25 (?i can't remember which right now) it says it flashed, resets and is still 0.99.99v. I wanna flash a good radio and the juicy telus rom because straight out of the box the gps has never work properly and the phone always messes up.
thanks guy
talking to myself
ok so i found this enableRAPI and CERT_SPCS cabs that disable the security warning (that comes up when i try and get into bootloader and makes the device freeze solid)
goin to try when my girl gets home
megagprime said:
where is the cdma hardspl? isn't that unsigned_1.4 hard spl... from the tutorial?
I flashed 1.57 on it and its hard to even get into the boot loader with the volume down/reset. sometimes it doesn't boot and just vibrates. sometimes it boot into wm6.1. I hardly can ever get it into bootloader then when I do and I flash a radio 1.0.5.25 (?i can't remember which right now) it says it flashed, resets and is still 0.99.99v. I wanna flash a good radio and the juicy telus rom because straight out of the box the gps has never work properly and the phone always messes up.
thanks guy
Click to expand...
Click to collapse
your worrying me, your not researching before your doing all this stuff and your going to bring your phone.
there are NO radio updates for the telus diamond. flashing any other radio will brick your device.
you MUST unlock your device with the CMDMA unlocker its not on xda its founds here
and you MUST make sure any rom files are CDMA based and not GSM.
may i suggest you first research the difference between CDMA and GSM cellular devices, and then i suggest reading very carefully. as some users here who do not have already bricked there devices. knowledge is key.
talkin to the walls again
Juggalo_X said:
your worrying me, your not researching before your doing all this stuff and your going to bring your phone.
there are NO radio updates for the telus diamond. flashing any other radio will brick your device.
you MUST unlock your device with the CMDMA unlocker its not on xda its founds here
and you MUST make sure any rom files are CDMA based and not GSM.
may i suggest you first research the difference between CDMA and GSM cellular devices, and then i suggest reading very carefully. as some users here who do not have already bricked there devices. knowledge is key.
Click to expand...
Click to collapse
thanks so much for the info, thats the .57 hard spl i have flashed, good thing the radio didnt kill it
thanks again
i have flashed my titan and have a good new radio and it works mint, why no cdma radios?
thanks again

Please Really Need Help for Flashig / Upgrading

Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
thats not the radio version, thats the SPL (Service Provider Lock).
and its a Hard SPL, which i presume you flashed to 'unlock' it.
the Hard SPL lets you flash a different ROM (but voids your warranty) it doesnt SIM unlock it tho.
TF3D (Touch Flo 3D) should run automatically when the phone is started, if it doesnt, go to Start> Settings> Personal tab> Today> Items tab and make sure "TouchFLO 3D" is checked.
Old ROM
thornofcarrion said:
Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
Click to expand...
Click to collapse
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
grahamkdt said:
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
Click to expand...
Click to collapse
Thanks a lot. But flashing with v1.93 will not do anything bad with the set. I once tried to upgrade my Imate jamin and it went dead and was not repaired. So I am a little hesitant you know.
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
mugglesquop said:
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
Click to expand...
Click to collapse
Thanks a lot. Could you please further tell me how to flash it.
read the tutorial in the stickie.
lots of reading
Thansk. Just tell me which is the latest and best version that I should use?
did u even look at the other threads? ....
4 threads down from yours:
http://forum.xda-developers.com/showthread.php?t=457980
Ok ok man. i got it myself without looking them thanks. But now I have this problem that messages are not being sent. i tried soft reset and hard reset but no avail. What could be the reason for that? B
By the way I upgraded it with 1.93 flash given above in this thread.
Try the new 2.00 ROM.
You can also try one of the smaller lite ones
(Swtos, Panosha), each time followed by a HARD reset (backup your Internal Storage data first).
If THAT doesn't work, you might have an SMS configuration/operator issue.
A.
messages not sent
make sure you have set the phone to your service provider....in connections

touch diamond rom update

Hi i have a HTC TD device and I am traing to update rom from 1.93.401.2 to 2.03.401.2 but not sucssesifuly and at the end of update update utility shows this massage : 270 update error , the image file is corrupted, please check youre update utility.
This is frustrating because i tried all possibilities to fix a problem and still nothing, does anybody have any expirience with something like this to help me thanks a lot.
have you tried downloading the rom again?
Is your device locked by provider? If yes, you have to hardspl.
nickytheshaft said:
have you tried downloading the rom again?
Is your device locked by provider? If yes, you have to hardspl.
Click to expand...
Click to collapse
Yes I have tried all available posibilities : Hard Reset, changeing radio, and it is not locked by provider because first time i was sucssesifuly updated and then i saw olinex and i instaled that one after olinex there is no way to instal 2.03.401.2 I think that olinex is my problem but i do not have any idea to remove it because i have tried all available options and this is my 5th day that i am fighting with that and still i did not find any solution but anyway THANKS A LOT and get back to me soon if you know how to resolve this.
Diamond-HD said:
Yes I have tried all available posibilities : Hard Reset, changeing radio, and it is not locked by provider because first time i was sucssesifuly updated and then i saw olinex and i instaled that one after olinex there is no way to instal 2.03.401.2 I think that olinex is my problem but i do not have any idea to remove it because i have tried all available options and this is my 5th day that i am fighting with that and still i did not find any solution but anyway THANKS A LOT and get back to me soon if you know how to resolve this.
Click to expand...
Click to collapse
I seem to remember that error 270 means that you need to udate your bootloader, Try flashing an updated HardSpl.
And remember olinex has two spl's, one for gsm and one for cdma, they are not interchangeable.
thanks
Thank you i solved my problem i have know that olinex is for gsm and cdma i am fixed with hard spl 1.34 and now work perfect and after this long problem resolving now i know everithing about rom because i have try everything THANKS A LOT AND STAY GOOD AS WHOLE THIS SITE IS THANKS AGAIN
Error 270 when flashing to 2.03 stock firmware
I had the exact same problem. I went out on a limb and try something different and it worked! When you have just completed a fail upgrade (you see the 3 colored bars on your phones screen) quit the firmware update software, soft reset phone, re-connect to computer, and immediately flash to hard spl 1.34 signed. When finished the phone will reboot to and viola, you will have the latest firmware installed. At this point you can put back on the latest spl (1.40 I think) so that you can load custom ROM's. Just remeber if you want to get back to the latest stock ROM from HTC you have to rollback to the 1.34 SPL. Hope this helps peeps.

Categories

Resources