Hello,
since Spectec hasn't released his microSD-WiFi card
http://www.spectec.com.tw/products_detal.asp?dptype=w1sdw823
yet I was wondering if it's possible to solder a miniSD-WiFi card to the contacts of the microSD slot.
Naturally some thin cables would be needed for this.
I know it wouldn't be a perfect solution but I like tinkering with my MDA compact III .
Any piece of advice is most welcome.
regards
novy
Related
hy guys,
i have bought a new mda compact 3, and new I ask myself, shoud I buy a micro sd card, or how big it could be. Now to my question, does the mda 3 accept a 2 gb card, I ask you, because my old mda compact doesn´t accept it, and before I buy a such expensive card, i will it know.
but please help me.
Hi,
2gb card from Moby Memory works fine in my MDAC3.
Regards
there is the thread about the cards dated back to the November.
Indeed you have a very special reason to create the new one
spangelsaregreat said:
Hi,
2gb card from Moby Memory works fine in my MDAC3.
Regards
Click to expand...
Click to collapse
yep i got the same one works just dandy
Sandisk 2GB works fine
Hi all,
Can someone sell me his sim card holder?
because mine is broken because i inserted a Micro Sim Adapter with micro sim and it stuck there i drawn it hard but the contacts are broken
Can anyone sell me it ?
If i buy it from Inet i have to buy 25 pieces but i dont need so much
Dear, Rajat155
PS: Sorry for my Bad English im German
Hi Folks, I have been using T-Mobile Samsung Galaxy S2 T989 for almost an year now without any problems, just recently I got a Samsung Galaxy Note2 which uses a Micro SIM Card and with an intention of using JUST one SIM Card on both the devices (as most people do) I CUT the original SIM card into a Micro SIM card and used it in Note2 and it worked Seamlessly fine, now to use the Micro SIM card in S2 I had to use a Adapter which I did and while trying to fit it in and (of course when it didn't fit) while puling it out the Edges of the SIM Card Holder/Reader tipped (on the edges), causing disconnection of the SIM card with the Assembly. I still am able to fit the card in (requires Perfection) and make it work seamlessly fine, but I still wanted to know the procedure to replace the SIM Card/Micro-SD Slot Assembly in the UNIT.
Also I was able to find a OEM replacement on EBAY selling for around 13$
I will be delighted if someone can guide me in taking out the Assembly and replacing it with the new one. Please note that my Skill level is intermediate and I am pretty much experienced in opening up the electronics and have teared opened Gadgets like PS3, Xbox, PSP, Windows Phone, IPhone with ease. Also please tell me if the replacement requires any soldering as I am not comfortable with it.
If anybody has any Tips and suggestions, please email me at [email protected].
Regards,
Naveed
What a coincidence, I'm looking for the guide too. Can anyone share with us? I broke my sim card slot. I bought a replacement and tried to explore how to fix myself. I was able to disconnect the connector but I am not able to remove the whole jacket. Can someone pin point us on that?
Your help will be greatly appreciated
@Danbuffalo, can we sync-up over the email. Please send me a Test email from your ID at [email protected] I need to tell you a lot of things.
~Naveed
SGH-T989 Sim & Sd Card Holder replace
I Have same problem I have new flex cable card holder but there are no videos or info on how to install.
Any help would be great.
Thanks.
https://www.youtube.com/watch?v=DpYNVfg-XW8&feature=youtube_gdata_player
Sent from my SGH-T989 using xda premium
Did any of you ever work out how to replace the micro sd card reader? Mine quit reading the card and I'd like to replace it.
I bought one off of Etradesupply.com but they sent me one for the gt-i9300 which is a smaller one and doesnt fit where can I buy an OEM one from?
anybody?
I'd like to buy one today if somebody could help me
You can do it right in your phone with an app called "Sim Contact Manager."
Much cheaper, too!
Edit: I had not tried this since transferring to S3. Doesn't work in this phone. Must be something different with micro SIM.
mengtor or gounlock.
Search for i747
Just as a tip for somebody that finds this thread in the future - You can buy the I9300 sim card tray all you need to do is peel the sim card and micro sd card reader from the iron plate and put it on your original i747 plate..Both readers can be removed easily by peeling them off they are just held on by glue
Hi all! Im coming from a samsung phone to the G8X and its been a wonderful device. I purchased a 256gb card and now i have problem dealing with dualsim and memory card as not all 3can be accomodated. I used the trick what i used to do with samsung phone. Cut the metal strip off the 2nd sim and glue it to the memory card. It did work on a samsung phone but the lg g8x had tough time taking the tray in since it is tightly packed. I ended up jamming the tray and destroyed it. Luckily after several hours of struggle i got the tray out and have been using a new one since. You guys have any idea on how to achieve this?