Develop Bugs

UNLOCKING THE AUDIOVOX PPC 4100 (AT&T)

Can anyone help me unlock a new (never sim carded) AT&T Audiovox 4100?
Pleas reply to:
[email protected]
Thanks

i would like to help but sory i dont have that kind of device

audiovox 4100 unlock
hey if u want your ppc unlocked email me at [email protected]
cheers.

farasimo ..u have to be banned of this forum ...first u was asking for this same problem a month ago now u have the solution and dont share it and want sell it ?? u are a shame

Well I should be ashamed and I also should be banned. But the thing is I spent on my research I had nightmares trying to unlock my 4100 I spent around 80 bucks trying to find things. Some guy even sold me a file that came from this site. Yes I know stupid. But I was trying everything. And since I did all that work to do this I thought I would try to get my money back. Is that reasonable?
Or is it not?
I give a little I take a little this site looks really good it has lots of information but it doesn’t really support the audiovox 4100 or have much support if any so this site might not be suitable to post this file in .
I guess what I am trying to say Is this site should have more on the audiovox 4100 before u can get anything like that on it. There is verry little help on the audiovox I still need help on mine and I cant get much information everything that I find is for other pda’s
The info is out there u can find it just like I did if u pay close attention. If u are not willing to work for it I think its fare to be charged a small fee. Don’t u think?
Me finding out the solution makes things cheaper or ppl. So isn’t that a little help ?

..

Hi PPC4100 users.
If you guys stop arguing and could help eachother like us HTC users, the PPC4100 would have made huge improvements in the hacking-development-mods-tweaks department.
Here's the requested file.
Just copy over to the Windows directory on the Pocket PC through Activesync.
Good luck!
Rayan

This is a temporary solution and phone goes locked again ..after battery is removed or a reset is done phone..
Anyone with a permanent solution?
bR

There is no permanent solution that I know of...
Just keep a copy of the DLL on a SD Memory Card and reinstall as needed (You will need Resco Backup or similar third party prg for that though, since the included File Explorer does not display dll files since they are system files)...!!!
Better yet... On Windows Mobile 2003 it's imperative to make use of a third party backup and restore program (i.e. Sprite Backup). If one backs up an unlocked 4100 and eventually restore from that backup, the phone will be automatically unlocked again!
Good luck!
Rayan

Help me
Help me unlock it, im use that dll file but i cant use it with my GSM netword
Im from Vietnam and use VN MOBIPHONE
Thank you so much

cool thanks

Rayan said:
Hi PPC4100 users.
If you guys stop arguing and could help eachother like us HTC users, the PPC4100 would have made huge improvements in the hacking-development-mods-tweaks department.
Here's the requested file.
Just copy over to the Windows directory on the Pocket PC through Activesync.
Good luck!
Rayan
Click to expand...
Click to collapse
Thanks a lot

Help plz, PPC4100 unlocking
HI
plz help, I downloaded the files for unlocking the PPC4100, but when I drag the file rilgsm.dll to windows folder ...it ask me to replace, ok...but when it tried to replace it said: Sorry the operation could not be completed because an expected error occured ( Error code -50)...so I tried another way, take the file to my document and try to copy and paste to windows folder trought the pocketpc and it said: cannot copy 'rilgsm': access denied. make sure the disk isn't full or write-protect or the file is used...but nothing of this is happend, all is ok...so plz help

vulcanus2007 said:
HI
plz help, I downloaded the files for unlocking the PPC4100, but when I drag the file rilgsm.dll to windows folder ...it ask me to replace, ok...but when it tried to replace it said: Sorry the operation could not be completed because an expected error occured ( Error code -50)...so I tried another way, take the file to my document and try to copy and paste to windows folder trought the pocketpc and it said: cannot copy 'rilgsm': access denied. make sure the disk isn't full or write-protect or the file is used...but nothing of this is happend, all is ok...so plz help
Click to expand...
Click to collapse
Try to the Copy and Paste.

I can't get this to work either, have I missed something?

I put the cab on my MDA Compact and installed it.
Using File Explorer I can see a folder in Program Files and an Icon in the Programs window.
This has the four Icons, Hide, Lock, Unhide and Unlock!
My extended-rom folder is visable in File Explorer so I tokk it that I didn't have to 'Unhide' it.
So pressed the unlock icon and got a window with debug and ok in the title and Error: I click ok.
1.When I get back to my desktop I have another debug, etc window with following FL_IOCTL_BDTL_HW_PROTECTION. I click ok.
2.The next debug window says The Parameter is incorrect. I click ok again.
3. The next says extrom unlocked. I click ok.
I am taken back to '1' and go through 2 and 3 again. The windows go away.
I soft reset the MDA, by using the stylus underneath it.
I go back to file explorer and into the extended_rom folder and try deleting the TMO_Wallpaper and am told access is denied!
Not sure what else to try, but guess the unlock didn't work or I have missed something. Please be kind, if you reply.

Re: I can't get this to work either, have I missed something
so3 said:
So pressed the unlock icon and got a window with debug and ok in the title and Error: I click ok.
1.When I get back to my desktop I have another debug, etc window with following FL_IOCTL_BDTL_HW_PROTECTION. I click ok.
Not sure what else to try, but guess the unlock didn't work or I have missed something. Please be kind, if you reply.
Click to expand...
Click to collapse
Hi,
I am not sure if it works for you to,
I have had the same problem, FL_IOCTL_BDTL_HW_PROTECTION on my screen. Device didnt unlock either.
Tried to do it in any possible way,
even on the fora over here.
But the one wich i skipped, or didn't found was the correct one for me,
Personal i Think my Windows Screwed the files up, but thats F%CK*#G WINLOOS.
So i went to the ftp part of this site, and just downloaded the unlock tool again,
Just did an hardboot of the device, installed the fresh download i obtained.
First unhided it, than reset, followed by unlock, and guess what it said?!?
Rom was unlocked.
So not an single error in my case, hopes it will work for u to.
It is not always your mda who fails, your pc can do this much better.
:arrow: :mrgreen:

How do I get to the FTP site, please?

http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site

Ok I think i have got to the ftp site, I say I think because when I clicked on the link it took me stright there, it didn't ask me for a username or password :?:
Anyway I searched all what I thought were the relevant folders and some that weren't and couldn't find the file
Can anyone help?

your device is called magician as codename
try looking in the sub dirs under there

I don't want to appear rude, but I have searched all the folders, etc!

T-Mobile Dash rom on a HTC 620 it's possible?

Hi boys
I have a question for you..
Can I load the T-Mobile Dash Rom on my HTC S620Pro unlocked?
I love the T-Mobile Dash Home screen theme and i f it's possible I want run it on my HTC S620 Excabilur
Thank you in advance for the answer

Yep but you might need to CID unlock (obtain SuperCID) which costs £20 ($39). If you just want the home screen just ask someone for it and copy it on. I would post it but I currently have the WM6 Dash ROM on my S620 and it probably doesn't have the home screen you mention.

I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............

hope this helps
http://www.esnips.com/web/xdadevelopers
please post after a reply if its ok !!!1

bidinot said:
I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............
Click to expand...
Click to collapse
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse

Hello,
Thanks for the great guide.When I get to the part to look for the bsa file in the hex editor program I cant seem to find it.Also, when I save the hex editied files do I save them to the folder were I extracted the Rom.I tried to run the utility without editing the bsa file (because I could not find it) and when I tried running it after pulling the usb cord it gave me the error message Invalid Update Tool.Do you know of anyone who can edit the T-Mobile WM6 Rom for me even if I have to pay for it.....
One last question...the rom I am supposed to edit with hex editor is it the new Rom (t-Mobile WM6) or the bootloader upgrade Rom..
Thanks in advance!!
r0p3 said:
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Click to expand...
Click to collapse

Data Crashes 4 newbie

Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!

please help me
Does a HardReset would help me in this???
The phone has Windows Mobile 5,
The ROM version is 1.15.515.1
Radio Version 4.1.13.42_02.89.90
And it doesn't seem to has any upgrade, so I don't believe it was a mistake in the installation or something. What do you think???
What do I need to eliminate this error and he ask me for the UnlockCode that I have??? That is all!!! PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!

I just did a HARD reset form the FAQ, and now I have from Original but i still get DATA CRASHES message..
For info it was in spanish now....
PLEASE HELP ME!!!

hell.cu said:
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Where did you see the post to fix this? Maybe we can help you with the directions if we read the post.

it was for the wizard device...... i already contact jogw99 haven't receive reply from him.
BTW it was because they want to unlock the device for 3rd party applications and something goes wrong. I only want to unlock the device for Any SIM use.
AND I HAVE THE CODE........... The deal is that i don't know why it came like that. I haven't touched at all....
PLEASE need help !!!

No one????
Is this so difficult. I am really stuck in here... What happends???

Hi, once again, so many people in this fourm and no one could help me???
I just need to know what steps do i need to follow to get the DATA CRASHES error go away!!!
PLEASE!!!!!!!!

hell.cu said:
Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Sorry, i was out for a while.
is your problem already fixed ?

Not yet. Please could you help me???

hell.cu said:
Not yet. Please could you help me???
Click to expand...
Click to collapse
The following should solve your problem.
Good luck !
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.

wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy

hell.cu said:
wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy
Click to expand...
Click to collapse
For CID unlock, try this.
Try the USPL-CID BYPASS to see what happend.
When the screen turn white, choos the rom you want.

Unlock Samsung Windows Mobile 6.x Smartphone

I bought a Samsung Saga i770 from eBay since it also works in GSM network. Sure it was locked to US Verizon Wireless. I discovered that there
is a easy to unlock this phone for free using the same way as unlocking Samsung i780 and Omnia i9xx. I believe it may work for Blackjack and other Samsung smartphones with Windows Mobile OS.
Download and copy attached archive into your smartphone and follow the guide. And if you find this guide useful make a little donation since
I really need a better Windows Mobile smartphone

gintasdx said:
I bought a Samsung Saga i770 from eBay since it also works in GSM network. Sure it was locked to US Verizon Wireless. I discovered that there
is a easy to unlock this phone for free using the same way as unlocking Samsung i780 and Omnia i9xx. I believe it may work for Blackjack and other Samsung smartphones with Windows Mobile OS.
Download and copy attached archive into your smartphone and follow the guide. And if you find this guide useful make a little donation since
I really need a better Windows Mobile smartphone
Click to expand...
Click to collapse
Hi,
I cant use this on the Saga i770 locked to verizon. If click any of the lnk files it gives me an error that the file is not certified or something like that. Can you advise?
Thanks

braindia said:
Hi,
I cant use this on the Saga i770 locked to verizon. If click any of the lnk files it gives me an error that the file is not certified or something like that. Can you advise?
Thanks
Click to expand...
Click to collapse
All you need to is to select Yes when you see a message
"The program is from unknown publisher". It's from Omnia ROM.

gintasdx said:
All you need to is to select Yes when you see a message
"The program is from unknown publisher". It's from Omnia ROM.
Click to expand...
Click to collapse
Hi Thanks a lot for your response. This program actually doesnt work, it throws up a window and says
The file "Personalize" cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found. If the problem persists, try reinstallling or restoring this file.
All three lnk files give the same error.
Thanks again

It's weird since you only need to extract the all files and open link files. Those link files are pointing into "Personalize.exe" near the .lnk files.
Try to copy "Personalize.exe" into Windows directory and lunch the .lnk files again.

gintasdx said:
It's weird since you only need to extract the all files and open link files. Those link files are pointing into "Personalize.exe" near the .lnk files.
Try to copy "Personalize.exe" into Windows directory and lunch the .lnk files again.
Click to expand...
Click to collapse
same error for me but last month i did use this method to unlock a phone and it worked fine and not i cant remember how i did get pass the error.
any help any body?

braindia said:
Hi Thanks a lot for your response. This program actually doesnt work, it throws up a window and says
The file "Personalize" cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found. If the problem persists, try reinstallling or restoring this file.
All three lnk files give the same error.
Thanks again
Click to expand...
Click to collapse
ok ok i just unlock it again. copy all the files to the windows folder and they will work fine then follow the pdf file. DONE!