Related
Does anybody have experience of Navman GPS software on the XDA II. I loaded the newest operating system as per instructions and then loaded the software. Now whenever the software is run, the whole phone runs at about a 1/50th of the speed.
Any suggestions as desperate. :?
spottrader said:
Does anybody have experience of Navman GPS software on the XDA II. I loaded the newest operating system as per instructions and then loaded the software. Now whenever the software is run, the whole phone runs at about a 1/50th of the speed.
Any suggestions as desperate. :?
Click to expand...
Click to collapse
Turn off incomming beams in control panel and try again!
Let us know how that goes? 8)
Thanks.
I tried turning off all beams but to no avail. Still painfully slow
What SD Card have you got the maps on? Make, Size etc
i have a SanDisk 1Gb SD card. Made in china
I was struggling setting up my Navman 4100 and also experienced a major reduction in the speed of the mapping software. It turned out I had the wrong com port setting in the GPS Status screen. I had no idea which com port it should've been until I followed the instructions here http://www.navman-europe.com/support.php?id=AA005410&faq=56
The EnableCharPin hack finally allowed my gadgets to talk to each other properly, thereby informing me of the correct com port to use.
Stick with it Spottrader, it's a pain to set up, but I can vouch for the fact that driving around being guided by 5 satellites is probably the coolest thing you'll ever do on a mobile phone ! 8)
(By the way, my incoming beams box IS ticked.)
Same thing here
Installed tomtom on my xda, an ipaq and a mitac mio. Same thing happened till I changed the gps over to tomtom gps on sp2.
All work fine, (even the bluetooth one on the ipaq)
Go figure.
Hi there,
Apologies for no-doubt coming across like a complete noob, but I am
A friend of mine recently let me borrow his Orange SPV M2000. He has burnt a different firmware image onto it - it says 'i-mate' when it boots rather than 'Orange' (the details are below).
Anyway, I am having trouble connecting the device to my Jabra 250v headset. I have tried all kinds of different connection settings but I get the same message:
Connecting...
(followed, about 20 seconds later, by)
Connection failed.
- Waiting for device
x Connection failed.
The device paired OK. Also, I have managed to successfully pair with a friend's phone and transfer files from his phone to my device.
This is driving me mad! Surely someone must be able to put me out of my misery?
Thanks,
Nik
--
Orange SPV M2000 (WM 2003 SE)
Operator Version : ??
ROM Version : 1.40.00 WWE
ROM Date : 03/10/04
Radio Version : 1.13.00
Protocol Version : 1337.42
ExtROM Version : 1.40.176 WWE
Under 'Bluetooth Settings: Advanced', every .exe and DLL is listed as v1.0.0.3900.
Hi,
I would have thought that at least one of the 40+ people who have read this post would have had *something* to say?
If there is a bluetooth FAQ or troubleshooting guide somewhere, please point me at it!
Cheers,
N
moralcrusader said:
Hi,
I would have thought that at least one of the 40+ people who have read this post would have had *something* to say?
If there is a bluetooth FAQ or troubleshooting guide somewhere, please point me at it!
Cheers,
N
Click to expand...
Click to collapse
Maybe i can help. I have had your same problem with my 250v (the same as yours) and my wm2003 rom.
The difference is that you say it DOES pair and when i tried (several times, with different wm2003 bt stacks) it did not even show me an available headset.
Other BT devices and the PDA in total, was working great, but... no working headset. I tried a different brand headset (can you still return yours?) and it worked. I got the S2 and G2 working, but i have had lots of probs with crackling noises on the line, so it was terrible to use (read useless, to my opinion).
On different forums the ericson HB... series is mentioned as working great, in combination with ppc2003, but i was too late on returning the device to the store and 1st kept the s2. Also you can READ and LOOK UP YOURSELF on different fora that the widcomm/broadcomm stack is not so good at all because even with a good headset, you get lots of cracks on the line when the headset and ppc are more then 1 mtr appart (or even less).
The S2 (very plastic and noisy) was working very bad for me and then my boss gave me a new jabra 250v. Unfortunately it didn't was discovered on my wm2003 pda.
Ok, so far my problem. The solution.
I have upgraded to wm2005 via helmi's 3.2 WM2005 ROM (on wiki). This has a sort of ms bt stack wich supports the jabra very well. Now i have no cracks, perfect sound on headset (hearing and speaking) and all other main programs still work (among gps).
So u choose, return headset and try a different one of flash to WM 2005. All other wm2003 options that are there (audio dll's other stacks, etc) i have already gave a try and do not work!
Sorry for the impatience. Looking at what I wrote, and how soon after my original post, all I can say in my defense is that I am having a tough week and lost the plot a bit
Sorry.
Thanks for the info. At least I know I am not the only one with problems! I am tempted to upgrade to WM5, mostly out of curiosity but also because it looks nicer (a poor reason to upgrade, perhaps?). Then again, I think I'll drop into my local Orange store tomorrow and try a couple of different headsets. I have had my old one for years now and had been using it with my Nokia. I am sure they won't notice that I am not using an Orange ROM
I'll let you know how I got on - probably one the weekend.
Cheers,
Nik
Hi all, for the last few months I have tried various Universal ROMs and even various WM5 phones including HTC and HP iPAQ, there are some commond issues which I haven't been able to figure out a permanent solution (work arounds are available though not ideal), these are:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Thanks!
kevin.jiang said:
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Click to expand...
Click to collapse
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
kevin.jiang said:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
kevin.jiang said:
I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
i've installed a hebrew sip but i dont have a problem loading it anytime i want.
although, sometimes i have a problem composing a new text message. the device gets stuck sometimes if the keyboard it not opened when i click "new".
happends only with helmi's 3.5 and with the hebrew keyboard. doesn't happen with default SIPs.
whats te program you found to load the all the SIPs?
is it "SIPz"? (from the same maker of PQz).
I have the same problem with blue thooth and CoPilot I use. The software is iGo. I tried several roms, but after I switch off the GPS and switch it on, it always wants to pair with Uni again.
StevePritchard said:
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
Click to expand...
Click to collapse
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
vuquan said:
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
Click to expand...
Click to collapse
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
kevin.jiang said:
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
Click to expand...
Click to collapse
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Cheers,
Steve.
I have both TT6 and iGO 2006 on my XDA Exec. The TT6 (and TT5 before that) always worked well with the BT-77 by simply pairing the GPS to the XDA EXEC on a COM port and selecting that COM port in TT6.
With iGO 2006, on the same XDA EXEC, it will ask to pair the BT-77 every time I launch iGO 2006. The only solution I could find was to use Franson's GPSGate to create Virtual COM ports for the BT-77 and to select this virtual COM port in iGO 2006.
StevePritchard said:
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Steve.
Click to expand...
Click to collapse
Thanks for the advise, I have tried unticking "secure connection" as well and it didn't help.
From what I am gathering in the information supplied it looks to be caused by a combination of the BT GPS receiver, the WM5 and the Sat Nav software.
I can't remember what make and model my BT GPS receiver is because I bought it over 2 years ago and back then I didn't care what model it is. Now that I can't tell it from looking at the outside of this thing.
This is a wierd problem as with different combination of the GPS reciver, WM5 and software it may or may not happen. What I was having that problem using Tomtom 6 I tried the GPSInfo shareware and it didn't ask me to pair every time. Very strange, anyway I am alright now with Helmi's AKU 3.3 using COM5 as the port with my good old BT GPS receiver and TT6.
kevin.jiang said:
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
Click to expand...
Click to collapse
Thank you so much! it work on my device.
I am now asking for help as I have come to the end of my knowledge.
I have an SPV M3100 running WM6 (tried a few different roms all to no avail) and a Fuzion BT GPS unit that I use when hiking.
I run some software called Memory Map but getting the hermes and GPS unit talking is a real nightmare.
The two are paired correctly and I have opened a COM port, but when I run Memory Map it will either come up with "ERROR: Cannot Open COM Port" or on the odd occasion that it sees the GPS unit, within a minute or so says "GPS: Communication Timeout" and refuses to work any more until I soft reset the phone.
To add insult to injury, I also have a Magician which works flawlessly for 7hrs or more with the GPS unit.
Anyone shed any light on why the Hermes won't play fair ?
Zigtek said:
I am now asking for help as I have come to the end of my knowledge.
I have an SPV M3100 running WM6 (tried a few different roms all to no avail) and a Fuzion BT GPS unit that I use when hiking.
I run some software called Memory Map but getting the hermes and GPS unit talking is a real nightmare.
The two are paired correctly and I have opened a COM port, but when I run Memory Map it will either come up with "ERROR: Cannot Open COM Port" or on the odd occasion that it sees the GPS unit, within a minute or so says "GPS: Communication Timeout" and refuses to work any more until I soft reset the phone.
To add insult to injury, I also have a Magician which works flawlessly for 7hrs or more with the GPS unit.
Anyone shed any light on why the Hermes won't play fair ?
Click to expand...
Click to collapse
ey, don't know the software you say, only one suggestion, try another soft to see if is related to WM6 and this soft...
I can put here the simple soft i use to get raw data from GPS BT if you need.
Regards.
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
Try a search on the Hermes forum. I found lots of stuff.
I found THIS ONE . But there were MANY others. Some users reported success with some ROMs.
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
I have 2 Varios II and I can admit that I had some issues with TT6 with WM5. TT liked to freeze when I was typing in the address or browsing through menus. When I changed to WM5 AKU3.2 it was better, but still not perfect. Eventually, it was WM6 that helped me. Now TT6 is running without any issues (of course it can freeze from time to time when I have too many programmes running in the background). Just try any of new WM6 and everything should be fine.
I had TT5.21 which people said run fine which didnt on wm6 but TT6.1 works fine
Long time since i've been on here but while i was browsing about, i saw this problem. All i can suggest is using the inbuilt GPS and see how that works? I have TT6 as well and i have used it perfectly well on an XDA Mini, XDA Orbit, SPV M700, HTC Touch, HTC TyTn II... seems a bit odd that you're having these problems. Have you since cured the fault or is it still being a bit of a ****bag?!
While i'm here... anyone got the latest maps at all for TT6? Shout me on [email protected] if you have any info on TT6 or need any PDA / Pocket PC help.
Griz
ibanyard said:
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
Click to expand...
Click to collapse
Yeah, I had established that the gps was working fine, I've been happily using it on my ipaq 2210 for ages. Then with the Hermes testing with gpsgate and some other stuff showed no problems.
The problem I had was that my TT6 was a 2GB SD card version and I didn't have micro SD big enough to test it. I had about 1hour to play with my friend's one and that's when I discovered the two problems.
He lent me the card to play with this evening and I've made a little progress now. I've sorted the flakey GPS operation, primarily by changing the com port, deleting the pairing and pairing again. So far that's not dropped out since.
Tomtom runs but freezes, this appears to be a confirmed problem which I hope that WM6 will solve as (mean-machine) suggests.
I feel a lot happier that the damn thing runs at least. The freezing appears to be related to cpu usage as I find that that zooming right out on a map is a good way to cause this to happen. The menu screens can be a problem too and the rest appear intermittent. As others have stated in other threads, hitting the red button and then switching back to TT will free it up.
I guess the next thing is to study the Wiki and try an make sense of the order things need to be done to put WM6 in, which Rom if any, which version of WM6. ... Information overload, so I think I need to take it slow and ingest the data .
Thanks for all the replys guys, it amazes me how much support HTC has and how many of you are passionate about them. Up till a few months ago I had never heard of HTC, now I doubt I'd consider anything else.
TomTom6
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
rbin said:
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
Click to expand...
Click to collapse
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
todd_jg said:
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
Click to expand...
Click to collapse
Great link, thanks Todd. Reading glasses are on already.
TT6 w/Pharos and Holux recievers work great
I've an AT&T Tytn upgraded to WM6 and have no troubles with my Holux or Pharos receivers and TT6.
Everything works great EXCEPT issues with data connections such as TT Buddies or traffic. This isn't unique to the PDA version of the software though, as I also have a standalone TomTom GO 910 paired with the phone and it works almost okay as a bluetooth speaker phone, but constantly has trouble getting a good data connection.
My $0.02
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have used TT6 on my MDA VArio II (TyTn) for almost a year...no problem. Now I have the TyTn II
Same here.. been using Tom tom 6 on my Tytn since the day i installed wm6, no problems here, works like a charm!
HEAT???
I have been using TT6 on my Imate JASJAM running the DOPOD WM6 ROM without much trouble (no hanging etc). The only problem I am experiencing is huge power drain and the unit being physically hot when running TT. Maybe this power drain and potential overheating can cause some units to hang and playup, or potentially any unit given the right environment!
Anyone else finding their units getting a bit hot?
I've been using TT6 on my Tytn (MDA Vario II) almost one year now. No problems. Started using TT6 while running WM5, upgraded to WM6 (schaps rom), reinstalled TT6 and it just continued as before. No problems, no hangups no freezing. I've been using all kinds of different charts with TT6, so I don't think the problem is with TT.
louiscar said:
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
Click to expand...
Click to collapse
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
I have been running TomTom Navigator 6 on my JASJAM for some time. The hanging problem described is probably caused by having all the Points Of Interest (POI) active.
Go into the TomTom settings menu and de-activate ALL the POIs. Try it, then only turn on the ones you actually require.
oltp said:
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
Click to expand...
Click to collapse
Doesn't work either. Seems that after a soft-reset the BT connection with my GPS is f*d. Very strange because the BT headset doesn't suffer any of this. Maybe time to buy a new GPS, but with WM5 I never experienced this behaviour.
I found that with tt6 you need to have the WM6 internal gps settings set to "None" for both program and hardware port. Then make sure the box is checked in the last tab so it autodetects the com ports. Once all this is set and you goto add a bluetooth gps device in tt6 it gives you the option to use com port 0. select this port and it should detect your gps unit with no probs. Been running tt6 on my 8525 with tnt's latest cooked rom and things couldn't be running smoother.
Edit: On another note. I used to use Telenav with my 8525 with the original at&t rom. I had the worst luck with that application. I would constantly lose my gps connect and I almost always had to do a soft-reset to get it working again. It is quite possible that Telenav was not the issue and that the particular rom I was using had bluetooth connection issues that were resolved when I switched to a cooked rom such as the tnt one. So for those using tt6 with BT connection problems you may want to try a different rom and see how your luck goes.