Related
Okay, lots of hx2000 users already flashed their roms, now facing the bugs:
# A2DP not working, please try this software. It might work for your IPAQ hx2000 series.
Attached Bluetooth Audio Router. Please give me reports if it works.
# Battery Drained Issue: Have you ever left your Pocket PC in your bag for the night and the next morning discovered that the handheld’s battery was flat?
ActiveSync
1) Go to Start> Program> ActiveSync> Menu> Add Server Source, under Server address put 1.1.1.1.
2) Tap Next (bottom right)
3) You’ll get three boxes to fill in: Username, Password, Domain. Fill in xxx in all, tap Next, Finish, Menu, Schedule
4)Peak times> change to manually
5) Off-peak times> change to manually
6) On top right click Ok
7) On bottom right click Menu> Options, on bottom middle click Delete, when you get the warning, click Yes.
You're all done. If you follow this fix correctly (as was originally stated above, it will almost always (as it would appear by others posts( fix the battery drain issue.
Messaging Accounts (Outlook Mobile)
Open up the messaging application. Tap Menu > Tools > Options > select the email account you wish to change, then tap Next > Next > Next > Options button. Remove the checkmark in the box next to "Connect and check for messages every xxx minutes." Then tap Next > Next > Finish.
Notifications
Tap Settings > Personal tab > Sounds & Notifications icon. Select the Notifications tab, and then tap the down arrow next to the Event dialogue box. Select the “Reminders” event and make sure "Repeat" is not checked.
Today Timeout
tap Start > Settings > Today icon > Items tab. Remove the checkmark next to “Today timeout” to disable the feature
HP Protect Tools
Do not use this, except you work for FBI and has lots of secret data.
Running Applications
Tap the Running Programs tab, select the application you wish to close, and tap the Stop button (or you can tap the Stop All button to close all running applications). Be sure all applications closed before turning off your IPAQ.
Power Setting
Pocket PC devices that are running Windows Mobile turn on at midnight to search for appointments for the coming day. Reminders are set and the Today view is updated with the day's events, thus on Battery power, turn off device if not used for 1 minute, Backlight on battery power: 30 seconds.
You can adjust whatsoever you want, the rule is turn off device > turn off backlight.
TODAY Plug-ins:
Better you uninstalled all today plug-ins thrid party progs.
Installed programs on SD/CF running in memory sometimes not respond after you turn on from automatic battery turn off.
It takes between 3-5 seconds to get response and/or sometimes program automatically closed by itself.
Solution: installed the programs in DEVICE.
Tips: Remove any unnecessary files in memory storage, so you will have more ROM memory storage.
After I turn on the device(2490b) from automatic battery turn off every time the backlight on battery power change to 10 seconds, no matter which setting I was choose. Until the device power off(auto or manually) the setting works, but after power on the setting change to 10 seconds again. Have anyone else this issue? Any solution?
dancer_69 said:
After I turn on the device(2490b) from automatic battery turn off every time the backlight on battery power change to 10 seconds, no matter which setting I was choose. Until the device power off(auto or manually) the setting works, but after power on the setting change to 10 seconds again. Have anyone else this issue? Any solution?
Click to expand...
Click to collapse
Uhmm strange, try to do clean reset whether the symptom disappear.
BT phone manager that you missed in wm6.0
extracted from WM5.0
Dear All,
Please pay attention that after making changes, installing new software or doing your usual software settings it is advisable to power off your device before soft-resetting.
Example, I recently setup my Inbox mail accounts and soft resetted my device in a usual way. After a soft reset I found out that none of my accounts was actually kept. So, I did setup again, powered off my device and soft-resetted it. After soft-reset all mail accounts were saved and were workable
To limit CPU Usage
1.Do the Activesync Fake server trick then turn all schedule to manual
To prevent Compaction
1.As much as possible free your program memory and install all programs in the SD of CF (if possible)
2.Move all cache to SD or CF (memmaid or SKtools can do this)
Registry: ActiveSync Manually
The above Activesync fix will also fix the problem many are having with not being able to turn on their WM6 unit.
JUST TO MAKE SURE ACTIVESYNC IS MANUALLY ACTIVATED:
You can also check the following registry entry:
[HKEY_LOCAL_MACHINE\System\ActiveSync\Engines\{176F 4FFD-F20C-4bd4-BDD7-01D0726C567B}\Settings] SyncAfterTimeWhenCradled (x)
Where x is one of the following:
0=Manually synchronize
5=5 minutes. Default value.
15=15 minutes
30=30 minutes
60=60 minutes
120=2 hours
240=4 hours
Here is real fix for A2DP problem on any custom hx2000 firmwares (e.g. 3.50, 3.52, WM6).
Download this cab file: Udillak_A2DP_Fix_for_hx2000_custom_firmwares.cab
Install it, make softreset and relax with working sound and controls of your bluetooth headphones.
Hello,
Since I've installed WM6 on my hx2790b it's great for everything but the PIM...
It's impossible to add a contact, an appointment, etc... It tells me "An unexpected error has occurred in this program." And it's impossible to synchronize the PIM with my PC
Any idea ?
Try to flash rom again, but you must do clean reset before (holding 1+power+3+ and stylus-reset). After successful update, u must do a clean reser again (on screen "formatting ps").
Synchronizing with PC, you must use the latest ActiveSync 4.5.
MightyBob said:
Hello,
Since I've installed WM6 on my hx2790b it's great for everything but the PIM...
It's impossible to add a contact, an appointment, etc... It tells me "An unexpected error has occurred in this program." And it's impossible to synchronize the PIM with my PC
Any idea ?
Click to expand...
Click to collapse
Calibrating your Battery
Read this:
http://h41206.www4.hp.com/webapps/IV3/adddoc.iv?locale=en_us&type=rep&prodSeriesId=349051&target=/NL_HW_IPG_iPAQ_common_EN_01_E/Resets/AllipaqsPoweIssuesBatteryCalibration.html&node=prodITRC/NL_HW_IPG_iPAQ_common_EN_01_E/N1|4|2|3&prodTypeId=215348&serverId=1
Calibrating your Battery
Power issues you may experience with your iPAQ over time:
* Unit fails to Power On
* Unit fails to charge 100% only holding 50% of the charge
Important: If you experience problems with power on your unit the fault may not be with the main battery. Swap testing the battery with a known good working battery may show the same fault. Calibrating your unit by running the 'Battery Calibration' test may resolve 'Power Related Issues'. You must follow the tests below exactly for good results.
1. Charge the unit for 30 minutes (No More, No Less) only powered by AC Adapter and 22-pin connector and not connected to the PC/Cradle (make sure the unit is switched/powered off).
2. Remove the power and full 'Hardware Reset' and then 'Soft Reset'.
3. Charge the unit again for 4 hours connected to ac power only. By following the procedure exactly as outlined in the steps above this will enable full calibration of the battery with the unit (make sure the unit remains switched/powered off during this charge period).
Note: After a software reset the power Leds (Light Emitting Diodes) should now be on and the battery should be showing 100%. If the unit still fails on power do the following checks:
*Test the AC Adapter at another location/power source.
*Swap test The AC Adapter if possible.
THIS WILL HELP BATTERY DRAINED ISSUE of WM6.0 in some HX2000 series; USING SKTOOL or MEMMAID:
1. KILL BioDtect in Windows Startup
2. Set Credant Manager in StartupService as MANUAL and STOP.
3. Set Standby into 24 Hr in Power Setting
4. Soft reset
5. DO NOT EVER EVER RECHARGE YOUR IPAQ USING USB in the CRADLE!!! RECHARGE YOUR IPAQ USING CABLE POWER SUPPLY ADAPTOR!!!
Bricked My Ipaq! hx2795... HELP!!
Hi,
I just got an Ipaq hx2795 and I upgraded to WM6, and it worked perfectly!. However, I saw a supposedly upgraded version of WM6 and i tried to install it, and too hastily I think. I did it without first removing my SD and CF cards. the upgrade said it went through ok on the PC, but it froze on the PPC, about halfway. ever since then, I've only been able to bring up the pda in pre-BL mode. Whenever I attempt to re-load any ROM (WM5 or WM6), I get the error message that the language of my current ROM is unknown and hence, the upgrade cannot go through. To further complicate my problem, I was trying to recover it about 3 nights ago and accidentally left the pda on all night in pre-BL mode. Now I think the battery is dead and I do not know how to charge it. Is there any resource or anyone that can help me with this problem? Is there a way to load the rom and Ignore the language setting on the Ipaq? What should I do now? HELP!!
Please let me know ASAP and Thanks!!
reggae,
You didn't follow step by step the flashing ROM procedure....please read it carefully...as written at: http://forum.xda-developers.com/showthread.php?t=329079
BEFORE FLASHING ROM: MAKE SURE IPAQ HAS BATTERY POWER ABOVE 80%
AFTER FLASHING ROM YOU MUST: CLEAN RESET AGAIN (FORMAT P.S.) and SOFT reset.
GOOD LUCK!
abbaml said:
reggae,
You didn't follow step by step the flashing ROM procedure....please read it carefully...as written at: http://forum.xda-developers.com/showthread.php?t=329079
BEFORE FLASHING ROM: MAKE SURE IPAQ HAS BATTERY POWER ABOVE 80%
AFTER FLASHING ROM YOU MUST: CLEAN RESET AGAIN (FORMAT P.S.) and SOFT reset.
GOOD LUCK!
Click to expand...
Click to collapse
Thanks for the assistance, however the flash keeps on saying that my pda's language is "unknown" and hence stops the upgrade as a result. What do i do about this?
Thanks
WM6 hx2795 and WiFi
Hello everyone,
I just came across this forum today, and was very happy to. I flashed my rom from wm5 to wm6 and definitely like wm6 more.
Now for my bug. I'm using an hx2795. Wi-Fi worked in wm5, now after I flashed the WiFi manager will connect to a AP then says 'Driver not loaded.' and disconnect. I saw Anavas' post in the "i will pay..." thread and said that wifi was working on his. So, I'm guessing it's possible to have wifi on this model. I'm hoping he/she or someone else can help me out? It's just strange that it seems to start working (can shortly do SiteSurvey as well sometimes)...
As can be guessed the driver update from HP doesn't work (incorrect revision error).
Resetting makes it works for a short time, but then I get the 'Driver not loaded' thing.
/* EDIT
* This only appears to happen when in the cradle. I took it out and it didn't give me anymore problems...weird, maybe something to do with connecting through usb vs wi-fi conflict?
*/
Thanks a bunch.
CE OS 5.2.1437 (Build 17944.0.3.1)
hi,
I checked with my hx2795 and I don't have any problem connecting WiFi so far,
I can able to connect it from my home and the office.
I even checked with the cradle, I have no problem,
Have you done a hard reset once you flashed the ROM, or did you install any other driver / software ?
I used my ppc at school all day today, and plugged it in cradle just now. I can't repeat the error, so I have no idea how, but it's working just fine. So....solution was to do nothing and let it go away, haha.
Ipaq Hx 2190 Wm6 Pdaviet Installed Ok
I Have Installed Wm6 Pdaviet Rom On My Hx2190 And All Worked Faster And Better.
No Problems To Install From Hp Rom 1.00.01h, Just Update In Pre-bootloader Mode In Windows Xp Sp2 Os. After Flashing No Need To Make Hard Reset, The System Starts Normaly.No Problems It Batery.
-put device into WHITE bootloader mode and again run the 1.0h rom setup. When you arrive at the screen that asks "update" or "cancel",
1. rename the wm5.xxx.nbf original from HP to wm5.xxx.nbf.old
2. rename the new wm6.xx.nbf from the 4pda.rar/pdaviet file to whatever your wm5-wm5.xxxx.nbf.
3.Flashing begin wait until finish. AC power must be conect. voila!!!
Normal Bootloader Mode:
contacts + mail + reset -let go and press calendar to activate
White Screen Bootloader Mode:
contacts + itask + reset -let go and press calendar to activate
Format P.S. (hold down until activated)(screen will say formating p.s. when activated):
contacts + messaging + power + reset
OR (I had to use this to format the p.s. after the PDAVIET rom upgrade)
calender + power + messaging + reset, release reset - release all
*ROM 4pda.ru
http://4pda.ru/forum/index.php?showtopic=52176 (site)
http://rapidshare.com/files/53282580/WM06.rar.html (rom)
*ROM Pdaviet (Better then 4pda)
http://pdaviet.net/showthread.php?t=13245 (site)
1/2 http://tom-love.net/ROM/HP/WM6.0_5.0...2000.part1.rar (rom)
2/2 http://rapidshare.com/files/60450793...part2.rar.html (rom)
Great Job. Thanks From Portugal.
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?
After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy
this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..
Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.
Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?
Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.
Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.
please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.
Hi all.
Suddenly, the "Space Key" does not appear in Full Qwerty Keyboard.
Now ".com" & "/" appear instead of "Space Key".
(plz see the attached file)
I want to change from ".com" & "/" to "Space Key",, how ever i don't know the way.
Could u give the solution?
i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable
Thank you very much for your solution!
My "CurrentET9Style" is 6.
After revise from 6 to 0, Back to normal keyboard.
Thank you !!!
mjcole2003 said:
i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable
Click to expand...
Click to collapse
Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post
thanks ,i think i get it.
supdawg said:
Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post
Click to expand...
Click to collapse
who's first post? I did install the tweak cab from ppcgeeks and would like to read that 1st post. If i uninstall the tweak will it fix the reacurring problem or do i have to hard reset? Thanks
when i changed to "autocomplete" I had the same problem with the space key being gone until i put the registry back the way it was...Tj
Keep CurrentET9Style = 0 ??
Changed HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
This works temporarily, but when I click on the time in a calendar entry, it switches to numbers, and does not switch back unless I re-edit the registry. Is there any way to keep the setting from changing at all? I want it to stay at CurrentET9Style = 0.
Anybody?
Hi everyone. Okay, first let me just say that the "FixStuckTP2Keyboard.cab" is fine and it does work. But it reverts your keyboard back to the "eT9" and you probably did a registry hack to change it from that in the first place (changed it to "COMP") am I right? Not to knock that cab, like I said it works just fine but I did NOT want to "install" a cab file everytime this happened (after it would change it back to "eT9" I would have to go back into the registry and change it to "COMP" again.)
Let me tell you HOW this is happening in the first place, it has something to do with Opera. You can test this very easily. First get your keyboard working properly, then open Opera. Type something in the address bar or just tap the address bar and BAM! Your keyboard is stuck in that mode. Now I don't know why this happens, that mode is getting stuck in memory for some strange reason and it will NOT let go.
I'm assuming this is ONLY happening to those of us who have used the registry (or a program or cab) to change the keyboard to "COMP" instead of "eT9" since changing it back to "eT9" solves the problem.
There are three solutions:
1.) ONLY use the slide-out keyboard when using Opera.
2.) Use the FixStuckTP2Keyboard.cab
3.) Use the MortScripts I created.
Use "KB-OFF (eT9).mscr" to force the "eT9" info into the registry. Then use "KB-ON (COMP).mscr" to enter the "COMP" info back into the registry, then do a soft reset.
You can rename these files if you like.
Yeah I know it sucks to have to do a reset just to get the use of your spacebar back just because you used the virtual keyboard when using Opera but hey, what are you gonna do?
UPDATE: Just noticed that "sometimes" my scripts don't work if you click on them one after another (again for some strange reason). If this happens to you just click on "KB-OFF" soft reboot then click on KB-ON" & reboot. Weird I know.
with any registy editor got to
HKLM/Software/HTC/CommManager
Change the string SupportedFunctions from default 6 to 10.
soft reset and your done
adds the following to your comm manager...
Ringer (change to vibrate mode)
Internet Sharing (launch Internet Sharing)
Beam (Turn off/on)
ActiveSync (launch acvtivesync)
Didn't work for me?
I saw your post and decided to take a look.
Mine was set to 8 already (on/off buttons) I changed to 10 and reset.
Upon boot I got an error and it wouldnt load Comm Manager. Set back to 8 and worked fine.
May be an issue with custom ROM perhaps. What ROM are you using?
I have what I need on my Comm Manager so I don't care.
im running stock sprint 6.1 ..try using advanced config. under menu go to more settings, comm manager and check off whichever u'd like 10 of them tho. click the upper rite hand ok then done and soft reset. try and see if that works
I wonder if someone can help me with this one...
For some unknown reason (honestly!), when I put my phone into standby, or soft-reset the device, the 'On Battery Power - Turn off backlight if device is not used for' resets itself to 10 seconds.
This is under- All Settings > System > Power > Advanced Tab
No matter which option from the drop-down I select 30 sec, 1 min, 2 min, etc., when the device is powered back up, the system has reset to 10 seconds.
1. Is this a known issue (not so important but still interested to know)
2. Is there a solution/fix aside from Hard Resetting (very important!)
Many thanks in advance for any help.
I experienced this with BareNaked ROM. Have you tried changing the actual registry values or just from the settings page?
burtonsnow8 said:
I experienced this with BareNaked ROM. Have you tried changing the actual registry values or just from the settings page?
Click to expand...
Click to collapse
Hi, thanks for the prompt response.
I havent tried the registry yet; can you prompt me as to which reg settings to change?
Im currently running windows 6.5 official ROM.
Many thanks.