Develop Bugs

Anybody figure out how to make a rom dump yet?

I still have the original English (Dutch region) rom on my MDA Pro. Before I upgrade it to Jasjar iMate rom I want to have an original rom dump, in case I have to use the warranty.
Either is there already am original MDA Pro English/Dutch rom somewhere out there (I can't find it) or is there a way to make an sd dump?

This should help!?
http://wiki.xda-developers.com/index.php?pagename=Universal_Technical

Yes but......
What is D2S????
Please could you explai step by step what we've got to do to backup entire ROM please?
I'm not a developer and there are a lot of answer from a lot of people about original ROM backup (expecially for MDA Pro)
Thank you very much
Lucam

Allright! Anybody try this yet? So if I understand correctly the
"d2s 70100000 04000000" (64.00 M OS TrueFFS) command will make the COMPLETE rom backup? Otherwise, if they are separate (ext rom, radio etc) I get more than 160 M.

Re: Yes but......
ciapal said:
What is D2S????
Please could you explai step by step what we've got to do to backup entire ROM please?
I'm not a developer and there are a lot of answer from a lot of people about original ROM backup (expecially for MDA Pro)
Thank you very much
Lucam
Click to expand...
Click to collapse
Its there on the same page: Get into bootloader command mode and use d2s command with the appropriate key.

i understand... but
So, i've got to do:
1)- press light + power + reset
2)- enter password 'UNIVERSAL'
3)- type 'd2s 70100000 04000000'
4)- the MDA Pro start to copy ROM to ....? (SD card? or what?)
and what about Extended ROM backup?
Excuse me for my problem understanding the page you referred but could you write a step-by-step way to completely backup ROM (ROM + Extended ROM). Please? i'm sure it could help a lot of people.
Thank you very much!
Luca

Re: i understand... but
ciapal said:
Excuse me for my problem understanding the page you referred but could you write a step-by-step way to completely backup ROM (ROM + Extended ROM). Please? i'm sure it could help a lot of people.
Thank you very much!
Luca
Click to expand...
Click to collapse
No problem, but I want to try it out myself first before I can give you any answers. I am using my MDA Pro everyday so at the moment I have no time to experiment with it and I don't want to risk f**king it up.......
Maybe someone else here can give you your answers. I will try to make a rom dump this weekend. I'll let you know here..........

STEP-BY-STEP
I found some pages who describes how backup an original ROM (in case of MDA PRO) to have it in case you need warranty.
I use this indications to make a usefull "step-by-step" to do it (...and excuse for my poor english)
What you need:
MDA Pro ;-)
USB cable
PC
1 sd card or mmc card (at least 128MB)
MTTY.EXE (you can find it in internet but the version can use usb connection and not only COM connection)
NTRW.EXE (you can find it in internet.this file must to be copied on your pc on C:\ not in other folders)
If you have ActiveSync installed on your PC on ActiveSync connection settings uncheck USB connection
Before connecting your MDA you should bring it into the boot loader mode. This can be done by simultaneously pressing power + camera buttons and at the same time the soft reset button with the stylus.
The password to enter bootloader is UNIVERSAL
insert a BLANK sd-card
Link the usb cable
Run MTTY.EXE and select USB connection
After that a terminal window will popup in that window.
Type d2s and press enter. Your MDA will start copying the ROM to the sd card. The screen of your MDA will be dark (no light), but you will see it counting up to 100%. When it reaches 100% it will say it is calculating the checksum. Give it some time till its done and it will say checksum ok.
Please note that somebody refers that typing d2s nothing works. There are others command to type due to what you want to obtain.They are:
d2s 60000000 00800000 8M radio rom
d2s 70000000 00100000 1M SPL
d2s 70100000 04000000 64.00 M OS TrueFFS
d2s 74100000 00a00000 10.00 M extrom DSK2ART00 fatfsd
d2s 74b00000 02c40000 44.25 M root filesystem TRUEFFS
Somebody refers that the command 'd2s 70100000 04000000' is can be used to backup entire ROM so if d2s doesn't work please use 'd2s 70100000 04000000'.
After finishing the transfer of the German ROM from your MDA to the SD card, put your SD card into an SD card reader connected to your pc. Your pc might pop up a warning message that says your SD Card is not formatted would you like to format? Click No and open a Command prompt (DOS) window.
Change directory to your root directory (cd c:\) and run the command ntrw read German.nb1 x: where x is the drive letter of your sd card. That command will create the ROM Backup file of your German ROM into your C drive root directory by the name of German.nb1. Make sure you keep German.nb1 in a safe place and use a copy of that file for the rest of the procedure. Note that after finishing the copy from your SD card to German.nb1 file ntrw might give you an error, just don’t pay attention to it.
Please confirm it or give me indication if I wrong giving this indication.
Bye
LucaM

To dump rom from your MDA pro need to enter:
1) d2s 70000000 00100000 <-- bootloader
2) d2s 70100000 04000000 <-- Operation System
3) d2s 74100000 00a00000 <-- Extended ROM

what is necessary?
Ok but isn't it necessary only to backup Operating System and Extended Rom to re-stabilish in future the MDA Pro as just bought?
Bye

Ok, I have been trying everything I could with the directions of ciapal, but no succes.....
btw: The correct button press sequence for bootloader is: Light-power-reset and NOT camera/p/rs
I get the following command sequence:
password UNIVERSAL
HTCSPass.<YHTCEUSB>d2s
Not allow operation!
password UNIVERSAL
HTCSPass.<YHTCEUSB>d2s 70100000 04000000
Not allow operation!
USB>
(the square is a vertical)
Anyone any constructive ideas about this issue? I'm surprised that obviously nobody has created a rom image from their Universal yet! :shock:

I get the same thing with MDA Pro... I am really keen to try the ROM upgrade but really want a backup of the original ROM first!!
Any ideas what is going wrong?

Bump
Anyone?
Thnx again!

Re: Bump
gpsenzo68 said:
Anyone?
Thnx again!
Click to expand...
Click to collapse
Buzz did it again- I think. See http://forum.xda-developers.com/viewtopic.php?p=190925#190925
He managed to dump the rom of the Universal device. It would be great if someone could dump his original T-mobile Rom, this in case of repair.

Re: Bump
simba said:
gpsenzo68 said:
Anyone?
Thnx again!
Click to expand...
Click to collapse
Buzz did it again- I think. See http://forum.xda-developers.com/viewtopic.php?p=190925#190925
He managed to dump the rom of the Universal device. It would be great if someone could dump his original T-mobile Rom, this in case of repair.
Click to expand...
Click to collapse
Buzz needs some time to test restore on the dumped ROM. Just waiting for the result.

hi
something must be wrong as when i enter the rom dump commands (tried all of them) nothing happens... the task 32 and info 7 etc work as described though

d2s on QTEK 9000 French Version bought without any provider
I have the same problem,
On mtty, password seems OK, info or task 32 give the same output but d2s return each time Not allow operation....
What does it mean ? Is there any kind of unlocking procedure to do on a device bought directly without any provider subscription ?
Should I stop extended rom installation programs with a soft reset just after a hard reset to access to this command ?
Any help are welcome...
Ecze

When I type d2s mtty says "not allow operation".
I connected my Universal via USB cable typed "d2s" in the window of mtty. When I pressed enter, mtty said "not allow operation". I read at http://forum.xda-developers.com/viewtopic.php?t=30109&highlight= that there is password for entering bootloader. Where should I enter this password?

Qtek G100 - need a rom dump

I appreciate if somebody with Qtek g100 (GPS navigator PDA) can dump the rom and upload it to the ftp..
I need it for changing CHT rom to English.
The way to do it is:
1. push Power+Record +Reset,
2. release reset, wait until screen start with White and than release both other - Power and Record. That will put the PDA in Boot load.
Once in Bootload, run the RomUpdate / Mtty , choosing USB , push Enter to receive the prompt USB>
3. type r2sd while SD is in the slot., the PDA will sump the rom.
4. when completed (back to Prompt). use NTRW by NTRW read p100ENG x:, while x is the drive letter of the SD card.
5. Upload the rom to the FTP.

Dopod p100 More details...
I have the "machine" for few days...
Playing with it , it seems that boot loader is the same as the ipaq 19xx.
I managed to dump the Chinese rom (attached ) using the monitor r2sd command.
When trying to flash it with the English version I get “Invalid ID”, it refuses to accept a flash of English version.
One way to help me is to patch the RUU to ignore country and the other one is to have a dumped of an English version.
I did not apply the procedure of NfbTools.. I do not believe that rom structure is the same as for the XDA.. shall I?
I will upload both files mentioned above to mthe ftp and appreciate help.

I have an I-mate PDA-N, it's my first PDA, but (after 2 months of reading about) now I'm able to do this.
Only one problem... I'm from Italy, and you want a ROM in english, I think
PS: excuse for my english

Guys rejoice.especially T Mob MDA III

All PPC users especially T MOB MDA III..no need to do an expensive CID unlock.Here is the way to flash the wm6 ROM.I wud recommend reading it very carefully.
1) You all will be surprised but you need to get Wizard's Shell tool, which is being used to flash a G4 Wizard.
2) Get hold of the .nb file and rename it to 80040000-OS.nb and keep it in a seperate folder(Not in that shell tool folder)
3) Now Active Sync yr artemis.
4) Take any nk.nbf of that Wizard and place it in the Shell tool folder and execute the shell.exe
5)Let the shell tool get the ROM info,Extract OS and give the message "Done".Wait here, do not press OK in the shell tool window.
6) Now minimise the shell tool window, delete the 8004000-OS.nb file from the shell tool folder and copy here the earlier renamed wm6(80040000-OS.nb) to the shell tool folder and now press the OK button, which will start flashing nad show this info in the shell tool window.
7) Contrary to the Wizard flashing, this shell tool will not inform you that flashing has ended, so u have to keep the process ON for 50 mins (for a safe side)
8) Disconnect and do a Hard Boot and YES u hv got it..
As a safe practice keep the T Mob initial ROM ready..in case u miss, you can reflash the ROM and redo the things as mentioned.
I can tell u that, It tool me 3 attempts to get the WM6, but I hope with above steps, you can get in one go.
It is too late so attaching a few screen shots to build in the confidence

im using the nbf file from the TMOBILE UK Mda Vario upgrade, it won't work for me, and the file is named 8004000-OS_0.nb

it has to renamed as 80040000-OS.nb

hdubli said:
All PPC users especially T MOB MDA III..no need to do an expensive CID unlock.Here is the way to flash the wm6 ROM.I wud recommend reading it very carefully.
1) You all will be surprised but you need to get Wizard's Shell tool, which is being used to flash a G4 Wizard.
2) Get hold of the .nb file and rename it to 80040000-OS.nb and keep it in a seperate folder(Not in that shell tool folder)
3) Now Active Sync yr artemis.
4) Take any nk.nbf of that Wizard and place it in the Shell tool folder and execute the shell.exe
5)Let the shell tool get the ROM info,Extract OS and give the message "Done".Wait here, do not press OK in the shell tool window.
6) Now minimise the shell tool window, delete the 8004000-OS.nb file from the shell tool folder and copy here the earlier renamed wm6(80040000-OS.nb) to the shell tool folder and now press the OK button, which will start flashing nad show this info in the shell tool window.
7) Contrary to the Wizard flashing, this shell tool will not inform you that flashing has ended, so u have to keep the process ON for 50 mins (for a safe side)
8) Disconnect and do a Hard Boot and YES u hv got it..
As a safe practice keep the T Mob initial ROM ready..in case u miss, you can reflash the ROM and redo the things as mentioned.
I can tell u that, It tool me 3 attempts to get the WM6, but I hope with above steps, you can get in one go.
It is too late so attaching a few screen shots to build in the confidence
Click to expand...
Click to collapse
Hi hdubli,
The problem is not that it is not possible, but it is extremely riscy! If the flashing fails you &@#* up the OS part of your phone, when you reboot your phone it will get stuck in the bootloader or at the splash screen, in that case you MUST have the original ROM! In the original language, there is a UK ROM so no problem for UK users, but there isn't a ROM for for example Dutch users so BIG problem for them if flashing fails!
Please all be carefull!!

ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/ShellTool_bugfixed.rar
is this a correct link to DL shell tool?

hi, now tested, it worked and shell tool can showed us
"Finished Flashing" after done, it is cool!
thanks!
@No need to go into Bootloader

Thanks Asukal

shelltool_bugfixed.rar error
Asukal said:
hi, now tested, it worked and shell tool can showed us
"Finished Flashing" after done, it is cool!
thanks!
@No need to go into Bootloader
Click to expand...
Click to collapse
hi asukal: i had download the file (shelltool_bugfixed.rar) and each time i try to open it, i get this error: "no valid device number (error 3). i have winrar 3.7 on my computer... any idea what´s going on?.. thanks

Can anybody show me how storage ROM by MicroSD on Artemis?

I useing a ARTEMIS ( O2 Orbit) with CHINA ROM 2006, but i cant connect ActiveSyn with PC,now i want to change langue China into English. Can anybody show me how change langue without need to connect ACtiveSyn. Can you show me how uprom by microSD.Thank alls

You must make your device SuperCID using POF tool. Since you cannot get activesynch working, I think you have to go into booloader mode.
>>Download the POF tool here:
http://forum.xda-developers.com/showthread.php?t=308242
Unzip pof tools into a folder>>>Please note the ROMUpdateUtility.exe program
>>Download the ROM u want here:
http://forum.xda-developers.com/showthread.php?t=308242
and here:
http://forum.xda-developers.com/forumdisplay.php?f=362
>>Please note that you MUST select the ROM with .nbh file such as the rom here:
http://forum.xda-developers.com/showthread.php?t=329453
There might be more ROM with different .nbh files but have not tried them. Unzip the file and locate the nbh file which should be the largest file.
++How to get into bootloader:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
>>>>In this mode, you will be connected to a PC via USB link. If you cannot get the USB link with PC....try to reset the unit while it is connect to the PC
++Run the ROMUpdateUtility.exe
Not sure if the itsutils.dll is required to be on the device or not....maybe someone else can provide information on this...
If it is successful, the device will reboot and you will have ISL 1.11. Proceed only when you have ISL 1.11. If not go back and run pof tool again
++How to flash via microSD:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I think that is all...everyone...please feel free to edit this...
I think u should be OK but anyway....good luck...

Sorry!!!
I forgot....
If you can get into bootloader mode and change the ISL to 1.11 via USB interface you can also FLASH any rom by going into the bootloader mode. The same tool ROMUpdateUtility.exe in the unzip ROM folder can be run...

Flashing WM6

hi all, i am a beginner with windows mobile and i am currently using a Asus P535 windows mobile 6 OS. I bought the set in Hong Kong but unfortunately i forgot that the language cannot be changed back to English. Now i am having a lot of problems with the chinese interface.
Can anyone teach me how to flash to a Malaysian English OS MY ROm or at least an English OS please ? thank you very much.
ROM date 2007/5/24
ROM version V4.7.12 CHT_HK00
Boot version 070416122657
Radio version V.4.7.0
MP version V0.164
Battery version 1.3
Ext ROM version V1.4.3 HK00
as i am a noob i hope u guys can input me with layman's term not pda terms..besides, i only have a USB cable to do it, no other sophisticated gadgets : ( thanks a thousand...

Try this.
Put it in your MiniSD card and execute it.
If it work, flash WWE version then.
vivi
PS. Not my work.I don't know who create this.

i must use an empty mini sd right ?
how do i flash WWE ?sorry i am not experienced in this field and even shops in my town do not provide such a service. I called Asus Malaysia, they are not helpful at all. I even asked if i could go to their service centre and pay for the service, they said no.
what is the worse that could happen if something goes wrong ?

i have run it in my asus p535 ...
it says ROM language ID: 404 (i think it is 404 too fast u couldn't see), now unlocking....
after that noting came out...
i try executing it again ....now it says my ROM language ID:0 , but my ROM is still HK00 , changing it to WWE MY00 is difficult, different region, different language.
does this mean it worked ? how do i continue ? thanks so much

V4.7.12 2007/08/20 update
Description ASUS PDA Phone P535 WM6 firmware V4.7.12_WWE_MS00 only for Malaysia
Additional features and improvements:
1.Microsoft Windows Mobile 6 Update
2.Extended ROM V1.4.0
Caution:
1.Do not upgrade to different language or regional version onto your PDA Phone, or it may cause device OS broken then won''t turn on anymore.
2.It is recommended to format SD card into FAT format.
3.Please also install phone module firmware V4.8.0 or above.
4.After the installation, previous data will not be found.
If your OS version is WM5, please use ActiveSync to synchronize and backup your personal data.
(Please do not use SPB Backup to backup and restore your personal data. This action might cause system malfunction or data missing)
If your OS version is WM6, please use SPB Backup software to Backup your personal Data.
5.Due to compatibility issue, please use ActiveSync version 4.5
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
6.Please make sure battery level is above 60%
7.Please make sure to use SD card with capacity 2G or less for upgrade.
8.Please make sure that there is no other folder named "2577".
If such folder exist, please rename it to a different name then change it back after upgrade.
9.After the installation, please go to "Start"=>"Setting"=>"System" and restore back to default.
10.Please be notified that it cannot be downgraded to Mobile 5 after upgraded to Mobile 6.
Please make sure you acknowledge such limitation and then proceed with the following steps.
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card''s root folder(Under Mini-SD''s root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap; In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535''s expansion slot and wait for firmware to setup automatically.
If the firmware didn''t execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warning: Do not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
File Size 52.94 (MBytes)
i got this from asus website...after run the unlock lang id...am i suppose to follow this ? please guide me ..thanks

ok i have tried it.
when i press system > ROM update
it says ROM update cannot be applied to this region's version!

still nobody to help me ? i have been trying hundreds times and nothing worked out for me...
please, anyone who knows ..teach me how to switch to WWE
thanks

Do you have a *.cap file (official Firmware)? If so, do the following
Download this.
Run "P535RomTool.exe -d6 AsusP535.cap" on command line.
Note 1: AsusP535.cap has to be in the same dir as P535RomTool.exe.
Note 2: If your file has another name, take the right one!
Copy the resulting GalaxyII.nb0 file to a clean SD Card.
Run ASUS.UnlockLangId.exe on your p535.
Perform power+photo+record+reset
Enjoy!

thanks for the romtool but...i cannot even run the P535RomTool.exe
when i try to run it, the black window pop up for a mili second and then nothing happened..
is it because of the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) ??
http://www.microsoft.com/downloads/...D9-AE1A-4A14-984D-389C36F85647&displaylang=en
thanks

P535RomTool not run
Hi,
I have a big problem, i cannot run the P535RomTool.exe
when i try to run it, the black window pop up for a mili second and then nothing happened..
I have installed the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86): http://www.microsoft.com/downloads/d...displaylang=en. I have Windows XP SP2. what I have still to make it to run this tool? Plaese help me!!!
Thanks

create a folder on your desktop named x or something else... copy original rom and p535romtool.exe in this folder. open command line via start/run/cmd or start/all programs/accesories/command prompt. than u'll see c:\users\username.. than type cd desktop and enter
after that u'll see c:\users\username\desktop
now type cd x and enter
after that u'll see c:\users\username\desktop\x
now type P535RomTool.exe -d6 AsusP535.cap
and enter...
it will convert your rom to nb0
copy this nb0 to your sd card and follow the instructions below....

aresavas said:
create a folder on your desktop named x or something else... copy original rom and p535romtool.exe in this folder. open command line via start/run/cmd or start/all programs/accesories/command prompt. than u'll see c:\users\username.. than type cd desktop and enter
after that u'll see c:\users\username\desktop
now type cd x and enter
after that u'll see c:\users\username\desktop\x
now type P535RomTool.exe -d6 AsusP535.cap
and enter...
it will convert your rom to nb0
copy this nb0 to your sd card and follow the instructions below....
Click to expand...
Click to collapse
Thanks a lot buddy. It converted the file into nb0 file and i have downgraded my p535 from wm6.5 to wm6.0 successfully.