Related
I own a new blue angel...called by O2 II's
So, after i read ,again,and again...I have successed enter boot loader.
With white screen it's shown the version 2.07 and the line at the top "Serial"
(uhm, i use WM2003SE as the original pda when i purchase)
Ok, the problem now is, i can't flash anyrom (in Wiki and any rom i found)
After the line appear "Don't plug cable or craddle of ...." it's seem to verifie it's self... and then the line appear again "this tool is not support for this device".....and some error like that.
I was totally confused, how i made the thing go wrong? or just i missed something???
i make a soft reset, then hard reset and then 3 button together to get the white screen with no light, still see words such as: serial, version 2.0.7...
When i plug the usb cable , then the serial change into USB as usual.
As my experience,( Dopod810 and Qtek S200) everything is normal...
One problem too, i can't connect to PC with activsync (i tried any versions as possible)but itself avaiable on Boot loader...
All you understand what happen with me???
Please help me out of this. I want my Blue Angel is not the worst i got ...(i think it's possible go up to wm6???)
Finally, thanks you all for listening( reading this topic)
Yep, Happened to me too. Heres the fix.
The regular WM6 exe will give you an error everytime with the O2 IIs. Finally I printed out the WM6 directions, and also the Blue Angel for beginners and some other threads and found the answer.
You are in the right place (stuck in bootloader that is). Now you should be ready to load the OS. In the Upgrade folder you will find:
"MaUpgradeUt_noID.exe"
Run it and you will see the progress bars on the Windows screen and the dark XDA screen. Don't bother it - allow it to complete.
After it completed, I was unable to restart, soft reset, hard reboot. I think I actually had to take the battery off. When I powered it again I saw the Color Bars and knew it was good.
Good luck, Be careful. Try to be calm. I know when I was stuck in between Roms I was close to being a nervous wreck.
erh, one more message when i fkash rom...
This MaUpgradeUT novid erh something like this but this
" This tool is not support for my device" or somehow ...
I think i really stuck...
when itself verifie version of rom , i can't see both version appear on windows.
ie : version rom which is in PDA and version of rom which is in the OS i next to flash(want to flash).
So Confused . Anyway, thank for helping !!!
You are close!
Yea,
I Kept getting that too. Couldn't see both versions. Got a couple of different error messages. you are right where I was. you've got to find the upgrade exe. in one of the folders. My IIs was stuck in bootloader and I started that upgrade and it skips checking the IIs first and just begins to xfer the data.
I'm the newbiest of them all, I think I bricked my brand new Excalibur!!!
Sorry if I'm posting in the wrong place, but I need heeeelp!
O.K., here it is:
I just downloaded kavana's 080314 WM6.1 installer for the HTC Excalibur, I ran the exe and followed instructions, afterwards, the ROM app opened and started upgrading the phone but it got stuck at 1%, it made be go thru the recovery process several times (unplug, turn off, disconnect battery, turn on) but it always started on tricolor mode and always got stuck on 1%, after a third recovery process the ROM app just quit and left me hanging on tricolor mode!!!
Activesync won't connect now, I try to run kavana's exe again but it doesn't recognize the phone either, the phone is on, conected (windows makes the usb sound for connection) but it is not recongized, it's as if it's not plugged.
It is stuck on tricolor mode and I don't know what to do!
Please help me!!!
Try the dicussion thread "Bricked my T Mobile phone" there are plenty of answers there.
Will this work?
I saw this on said thread, but I presume it applies for a Herald phone, will it work?
The tricolor mode is "bootloader mode"?
Isn't there some sort of restart that can fix it?
Can someone elaborate on this? I'm really a super-noob!!!
"Try a SD card flash to unbrick your device
This is how:
MAKE SURE THE HERALD IS FULLY CHARGED BEFORE STARTING THE PROCES
#01 Download your original RUU
#02 Download (if not yet installed) WinRar and install
#03 Copy your full sd micro card to your harddisk and format your card with FAT 32
#04 Rightclick the downloaded exe file with your original RUU, click Unpack here
#05 In the map the will be created you will find a file (or similar) called RUU_signed.nbh. Copy this file to your formated sd microcard.
#06 Rename the file to Heraimg.nbh
#07 Get your Herald into bootloader modus by pressing the comm manager button and the camera button and pressing the reset button at the same time. Do not release both buttons until your in bootloader.
#08 Once in bootloader pop in your sd micro card.
#09 As soon as your card is popped in the screen will say something like "Reading SD card". Wait it out till it says "Push button to start" and slide the indicated volume slider down.
#10 The Herald will start the flashing proces. Wait it out till it says "Press any button" and hit the send button.
#11 Perform a hard reset
#12 Voila! Your back in business"
velascoperroni said:
I'm the newbiest of them all, I think I bricked my brand new Excalibur!!!
Sorry if I'm posting in the wrong place, but I need heeeelp!
O.K., here it is:
I just downloaded kavana's 080314 WM6.1 installer for the HTC Excalibur, I ran the exe and followed instructions, afterwards, the ROM app opened and started upgrading the phone but it got stuck at 1%, it made be go thru the recovery process several times (unplug, turn off, disconnect battery, turn on) but it always started on tricolor mode and always got stuck on 1%, after a third recovery process the ROM app just quit and left me hanging on tricolor mode!!!
Activesync won't connect now, I try to run kavana's exe again but it doesn't recognize the phone either, the phone is on, conected (windows makes the usb sound for connection) but it is not recongized, it's as if it's not plugged.
It is stuck on tricolor mode and I don't know what to do!
Please help me!!!
Click to expand...
Click to collapse
I believe you didn't application unlock it first. I had same issues. I finally got it to load. I don't think you bricked it. Remove battery wait a few seconds and restart phone
timothyjok said:
I believe you didn't application unlock it first. I had same issues. I finally got it to load. I don't think you bricked it. Remove battery wait a few seconds and restart phone
Click to expand...
Click to collapse
Already did that... still on "brick" mode...
Question: is my warranty still valid? I bought it 3 days ago.
you can solve simply to launch original upgrade to wm6 rom
glenbo said:
Try the dicussion thread "Bricked my T Mobile phone" there are plenty of answers there.
Click to expand...
Click to collapse
Do try these procedures first. I'm just throwing it out there but if you try again it is probably a better choice to flash to WM6 first. Then try flashing to the 6.1.
I'm sure you can return it but come up with a believable excuse.
Yes, You Are Correct!
pfunkside said:
Do try these procedures first. I'm just throwing it out there but if you try again it is probably a better choice to flash to WM6 first. Then try flashing to the 6.1.
I'm sure you can return it but come up with a believable excuse.
Click to expand...
Click to collapse
Yes, that is the correct path for him to take, install a 6.0 ROM first, before installing a 6.1 ROM. I suggest he install the T-Mo official wm6, just to get things started in the right direction again.
(1) If the device is still in the tri color mode (bootloader mode), that's a very good sign, it's not bricked. Connect the device to your PC via active sync in the tri color mode, you may think that the device is not connected to Your PC but it is, it may not look like it's connected, run the official T-Mo wm6 ROM RUU WWE, it will install on your device as long as your device is in the tri color mode.
(2)Once you get the wm6 ROM installed on your device, you must first SDA_ApplicationUnlock your device, next you want to Certificate AppUnlock and SurrealApplication Unlock your phone. Now, the reason you are doing all these unlocks are because you coming off the T-Mo wm6 ROM.
(3)After all this have been done, it now ok to try to install the 6.1 ROM on your device.......!
Great support!!! But now comes the obvious question from the n00b of the n00bs!!!
Got it, now the big question is: how to flash to WM6?
Is it done by the steps I posted early? (formatting SD, etc.)
Also, where do I get the T-mobile RUU?
Finally, there are a few things you should know, my phone was bought in Mexico, under the cellphone company Movistar (Spain's Telefonica and I've heard U.S. AT&T), it had WM5 before I "bricked" it (hehehe).
When I turn it now, a few miliseconds before the tricolor screen I can read in the phone a "waiting for SD card" message when the tricolor screen comes on, I get this version of RUU 1.15.000.
I appreciate all your help, as a contribution to this amazing community, when I get thru this, I hereby commit myself to write a fully understandable guide for noobs with the same problem (not too long).
T-Mo Wm6
velascoperroni said:
Got it, now the big question is: how to flash to WM6?
Is it done by the steps I posted early? (formatting SD, etc.)
Also, where do I get the T-mobile RUU?
Finally, there are a few things you should know, my phone was bought in Mexico, under the cellphone company Movistar (Spain's Telefonica and I've heard U.S. AT&T), it had WM5 before I "bricked" it (hehehe).
When I turn it now, a few miliseconds before the tricolor screen I can read in the phone a "waiting for SD card" message when the tricolor screen comes on, I get this version of RUU 1.15.000.
I appreciate all your help, as a contribution to this amazing community, when I get thru this, I hereby commit myself to write a fully understandable guide for noobs with the same problem (not too long).
Click to expand...
Click to collapse
Is your mobile device still in the tri color mode, if so just connect it back to your PC via active sync, It will accept the download! OK you can get the T-Mo wm6 at T-Mo's website, if not I will send you a link with the T-Mo wm6 RUU. Don't panic, you are still in the game.......!
Update!! Phone unbricked but still on WM5!
Ok... I used this ROM: HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
It went thru the upgrading process but got stuck at 3%, anyway, it finished with a message like "this ROM cannot be used for your phone" or something and restored WM5.
Now I will follow instructions on the thread: "The Full Guide To Upgrading From Windows Mobile 5 to 6" and I'll be posting my acomplishments on this thread.
Question: The reasons for me not being still able to upgrade may be:
1. I haven't unlocked phone,
2. My phone is for Mexico and cellphone co. "Movistar", or
3. I'm running Windows XP as a virtual machine (via parallels) on an intel Macintosh and somehow there's a problem with the USB drivers.
I'm rooting for option 1 (but kavana's upgrade was supposed to already unlocked it). Option 3 maybe but then, why do I get Activesync to run? Option 2 would be a bummer!
T-Mobile WM6 RUU WWE ROM
Get the T-Mobile official Wm6 RUU WWE Rom here http://www.mediafire.com/?0vtw32zmuz3 ......!Oh! I throught you had a Excalibur.....!
Just can't seem to upgrade WM5 to WM6!
Iv'e tried the T-Mobile ROM and the HTC ROM and I get an: "invalid vendor id"
I tried every step on the aforementioned thread, even de CIS unlock, and still no luck... again, my vendor is movistar/telefonica/cingular.
Any thoughts?
Your Answer Is In jockyw2001 Thread
velascoperroni said:
Iv'e tried the T-Mobile ROM and the HTC ROM and I get an: "invalid vendor id"
I tried every step on the aforementioned thread, even de CIS unlock, and still no luck... again, my vendor is movistar/telefonica/cingular.
Any thoughts?
Click to expand...
Click to collapse
A easy frix, but read the instructions very carefully, jockyw2001 thread is located in the sticky section. What you are looking for will be in post #1.........!
New Instructions
Run the Excalibur Uspl-CID ByPass.zip, extraxt on your PC and open it there, you will see several file folders. Open the one that say (uspl) MS-Dos batch File, follow on screen instructions by pressing any key. This time when you see the white screen on your device do not panic! Run the HTC WM 6 ROM, this is done while the screen is still white on your device. Just follow the on screen instructions on your PC.............!
Now I definitively bricked it!
I ran the CID unbloker, screen went blank, ran the ROM, it got to 16% and made me do a recovery, after the recovery it gave me the same "invalid vendor id" message and it automatically restarted the phone, but...
The restart stopped at the HTC intro screen!! I've restarted it several times and it just stops on the first HTC logo screen... even a hard reset won't fix it!!!
HEEEEEEEEEEEEEEEEEELP!!!
Here is a visual aid.
You are not reading into detail. Use the Tmobile rom instead of the HTC Rom.
http://forum.xda-developers.com/showthread.php?t=368998&highlight=Jamerican
Still Bricked!!!
Yeah!!! superb visual aid!!!
I just wish I had seen it before I bricked it!!!!
This is the current state of my phone: I press power, I see a white screen with the HTC logo in the middle, the phone vibrates, still the same HTC logo... and it is stuck that way! I can't turn it off, I have to take out the battery!!
I've tried a hard reset, same thing happens! It stays stuck on the HTC logo screen and I'm forced to pull the battery out for the phone to shut down.
It is obviously not recognized in any way when I plug it to the PC's USB.
What made this happen? HTC Generic ROM got stuck on 16% before telling me "invalid vendor id", restarted the phone and voila: brick!!
Boy, I wish I was back in the tricolor mode!!!
IS THERE NOTHING I CAN DO?
I'm seriously thinking about going back to the vendor on monday and saying: It was like this when I woke up (I just bought it three days ago!!!)
If it gets that far, it doesnt seem totally bricked, ima PC man, so this may be off, but it seems like some kinda bootloader error on the phone itself....IE, the HTC screen is all that the bootloader tells the phone to load. Have you tried forcing the phone into bootloader mode?
I Looooooove Google!!!
OK... I found a turnaround for the problem... got it to go to bootloader mode!!!
Whenever something like these happens to you this is the hard way to put your excalibur/dash in bootloader mode:
1. Take out battery and sd card;
2. Plug your USB cable to your PC (not yet to the phone)
3. Press and keep holding the SIMB. key (the one with the camera next to the space bar)
4. Plug your USB cable to your phone (while still pressing the SIMB. key)
5. Voila: You are in bootloader mode!!
This was gotten for a 15 min. search in google!!
Now... I'll keep going with my WM5 to WM6 upgrade...
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.
Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.
The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?
Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274
Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance
same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all
in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure
Helppp!!! please
tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?
I close the wcescomm.exe and the rapimgr.exe is there anything else?
The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see
After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!
I change the language of the rom and it works
thank very much all of you
At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....
hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!
Hi
My device has a German ROM.
I tried to Rom Upgrade to my O2 XDA III PDA but it doesn't work!
when i flashing the device it's freeze on process at%41 and give a error message. i unplugged the device craddle and flash same ROM again and process completed succesfuly. After all when i turn on my device ,there is only 3 Color on screen (Blue - Green - Red) and at the bottom of device is white. it writes R.1.10.00 at the right bottom of the screen.
Sorry about my english ! i searced it on web but i found a information and it tells find same type device and update ROM with FAT 32 Formatted SD Card.
Can anybody help me for Solve This Problem.
Thanks.
1. do you use vista/7 ?
2. did you forget to take out the sim and sd card during flashing?
that would be 2 possible reasons why you had the error in the first place.
now for the solution: if the flash was really complete and successful, which at this point you cannot tell by the success message, have you performed a proper hard reset?
the instructions on how to do that are to be found here: http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
power+reset, record+camera, then set the menu options to No, Yes, Yes confirm with the mail button.
rom upgrade through the sd card is generally not such a good idea, since it has never been fully confirmed, that and how it works.
if the hard reset does not solve your problem, you should read -=this=- really carefully and think whether you really did ALL the steps, they are all equally important.
Problem is getting worst !
Thanz chieff for your Help.
Problem is getting worst and confusing. i updated Radio version to 1.10.00 to 1.15.00. Device is turn on but it doesn't boot. My Device has no camera. When i plug it to creaddle it's orange led is ligthting and randon times it boots and 3 Colored screen shown. R.1.15.00 D.****** G******
HTC Blue Angel Windows Mobile 6.1 WWE only. But now it's do nothing. This morning i made hard reset to device and shown SERİAM V.2.07 and put ,t to creedle and tried to Urgrade room but it gives error random positions etc. %54 or %89. ERROR 112
is my device dead???
Thanx you very much for helping me.
(Sorry About My English )
About my OS
i tried to upgrade XP Pro (SP2). Vista and Windows / is Not permission to upgrade...
if you're giving up, mail it to me. i should be able to tinker with it.