I have a UK M5000 and updated the ROM to the new Orange ROM without problem. It was still slow so I plunged for the upgarde to the Dopod ROM. Since I did this it crashes all the time. Sometimes I can reset it sometimes I have to take the battery off. After a bit it won't even boot at all!
Despite all this I am always able to get to bootloader and reflash it. I have since tried the QTEK ROM and even back to the Orange ROM but now it still is unstable. Is there any known reason for this that I can try.
PS tried task format commands and mtty stuff as most of the time after a crash it sticks at the splash screen in all ROMs.
PPS IT NEVER did any of this before even after the first Orange ROM upgrade.
ANy help much appreciated.
Thanks
James
Not sure if you've cured this by now but I am a UK Orange user with SPV M5000 and went ahead with Dopod upgrade wihout any problems.
Presume you tried Hard Resetting, formatting card etc?
I have the same problem... It starts 2 days ago... Its terrible!
I have T-mobile. Now i flashing with original T-mobile ROM and i hope that everything will be ok.
If anybody knows whats happend???
I thought that the problem is on hardware...
30 minutes ago i flashed with latest I-mate ROM and when after flashing i do hard reset nothing happend. I see black screen and thats all!!!
Yes! With T-mobile ROM it seems to be ok. Now i try to flash with I-mate ROM again.
May be the problem is in the "MaUpgradeUt_noID.exe"?...
MaUpgradeUt_noID.exe
I find out that there are some issues with this file. Is this the same file we used to use during upgrade/change language??? If yes, than why when I tried to dawnload from the buzz web side i find that there said that the file is 365kb but when you dawnload the file is 165 and that is why some people are having problems when upgrade their rom or change operators/languages.
So if I want to change language it sais that you shoul run MaUpgradeUt_noID.exe and than I see in the picture of Magician. Is this NORMAL and should I go forward or WHAT.
Flashing with T-mobile original ROM didn't resolve the problem...
It's still bad...
What the hell is going on with my Universal???
I have dopod d810, i recently flashed my device to LVSW 2.0.0.7, radio 1.41, and also HARDSPL.
Now i want to upgrade to LVSW 2.0.1.1 latest rom. But after so many times i have done the upgrade procedure, after reset, it keeps going back to the previous rom.
The upgrade seemed to be working. but when it finished, i still got the old rom...
I have tried SUPERCID unlock my device. but no luck.
even worse I tried to revert back to original dopod rom, still no luck.
There is no error when flashing, it wen from 0% to 100% without problem, just it keeps reverting to old rom.
anyone??
klikman,
Check this link: http://forum.xda-developers.com/showthread.php?t=293632
Hi everyone!
I'm Ray from Portugal, greetings to you all
I've been trying to upgrade my HX4700 to WM6 (using several methods) Kozhura edition but every time I upgrade and do a hard reset I get stuck on the "clering data" screen
I used the method explained on the readme.txt and the boot loader method.
I upgraded from WM5 standard version
I managed to revert to the WM5 standard and It worked, then I tried it again and the same problem occured.
After that~I reverted directly to the AKU 352 WM5 version from Kozhura and it also worked (I am using it now)
The problem is only with WM6...
Any thoughts on this?
Thnx
Ray
How long have you waited at the clearing data screen, its taken mine a few minutes easily and I have sometimes wondered if it would ever finish. I have also found that doing a hard reset with the stylus first and then doing the clear data works much better. Also which version of the WM6, fix 3 or the new ver 4?
probably took some minutes, 5 at most..
what do you mean doing a hard reset with the stylus and then clear the data? you do a hard reset without clearing the data (itask button) and then a another hard reset and choosing to clear the data (calendar button)?
I used release 4
wm6 not start
HI!
did you have found how to solve this problem is have the same condition that you have an can not found how to fix it.
thanks!
raybanana said:
Hi everyone!
I'm Ray from Portugal, greetings to you all
I've been trying to upgrade my HX4700 to WM6 (using several methods) Kozhura edition but every time I upgrade and do a hard reset I get stuck on the "clering data" screen
I used the method explained on the readme.txt and the boot loader method.
I upgraded from WM5 standard version
I managed to revert to the WM5 standard and It worked, then I tried it again and the same problem occured.
After that~I reverted directly to the AKU 352 WM5 version from Kozhura and it also worked (I am using it now)
The problem is only with WM6...
Any thoughts on this?
Thnx
Ray
Click to expand...
Click to collapse
Hi after doing research via browsing through the forum entries particularly the Locking and Freezing threads WM6.1 and Google. I am still scratching my head. My friend has a Hermes 100 device TYTN Mk1 (HTC). It had a not for resale test rom on it. I SuperCID and HardSPL'ed it and put schnaps 4.31 on it but it kept freezing and after countless soft resets and hard reset I decided to revert to WM5 HTC Build.
This was stable, I had read in the locking thread about installing an official rom first before trying cooked roms. I did this and then tried schnaps again. Once upgraded the locking problem occured again. I then Put AT&T WM6 on and that did not freeze. So I tried again but this time I tried FARIA & Dr P's WM6.1 but same result locking freezing.
The unit does not have a SD card installed. All flashes were successful. Is there something that Official ROM's have that cooked roms are missing? Also is my friend doomed not to have WM6 on his hermes?
Adviced need
Thank You
Thomas
Ive been using a herm100 for the past year now. never had a problem with wm6. i upgraded to 6.1 when i cooked my own and still no problem where others are. one theory to do with 6.1 is the radio rom. Im using 1.50.00.00. Id suggest trying that with a good 6.1 rom and if it doesnt work i reckon it could be something wrong with the phone. Let me know how you get on and good luck.
dear friends
I am facing a strange problem on my diamond.
After flashing any ROM (whichever it may be) the loading of cabs etc takes place successfully.
But, after few minutes/hours the contents of strat/program are gone. and no program functions. I have flashed re-flashed and reflashed. cannot get over this strange proble.
Can any body guide me what wrong is happening with my diamond???
PS: I have hard SPL 1.40 olinex on my device.
Problem Solved -->http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22 (Thanks cmonex)
c_shekhar:
I have a similar problem. I have had no issues flashing in the past and am very familiar with the procedure. The other day however I noticed a problem where by some of my apps would "disappear".. odd. Also after some time my phone would hard reset instead of soft reset, at first I put this down the ROM as I have had this before with udk's ROMs (no disrespect intended!) and had tried his topaz ROM. It seems to have got to the point now that once a few hours have passed my phone will lock up and then when I reset, it just hangs at the "touch Diamond" screen and I have to hard reset.
I have tried reflashing Radio, Hard SPL, OS.. I have also tried installing my apps one by one and soft reseting after each install. just whenI think it is working it will freeze again.
I have tried flashing different HARD SPL's but it always completes but when I go into boot loader it still says OLINEX 1.40.
What was the last ROM you flashed before you started noticing the issue? The last two I tried where udk syrius topaz and DIB 1.33.
I wandered if it was something to do with the data on my internal storage???
Going to try a hard reset and format movinand next to see what that does.
P.S: yours was the last ROM I used for my Polaris, it was awesome!!
I tried uDK's topaz based latest ROM and after that it started givind problem.
many a times when I prick for soft reset it hard resets the device. I have hard resetted my device several times but it does not set the problem right.Huhhh
Thanks for liking my Polaris ROM..
any headway found by you pl share.....I had borrowed somebody's Diamond and it is F*##ed up.
Same problem here
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
I new I wouldn't be the only one!!
I have just hard reset and formatted movinand AND re-downloaded all my apps so for now nothing will be going back on my internal storage that was on before.
I'll post any updates.
I have the same problem with the Morna. Flashed, reflashed, soft & hard reset.. nothing solved. Every about 24hour the TF3D won't start, the SMS&Emails folders are empty, no contacts and on desktop an error on file BOOT.MSC (can't find associated program to open that)...
After 3 days, I have flashed the Touch with the TIR11 and no one problem. I don't know if the problem is of the rom or else...
Sounds like a virus...
never encounter this problem,but some of my friends does.neither do I know why
offtopic: Are you working on a Diamond rom? I really loved (in fact I'm still using it) your 1.60.21014bCS on my polaris... I think it will be permanent... Have you thinked of making a M2D rom for Diamond ?
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
garymeg said:
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
Click to expand...
Click to collapse
Thanks for the info, i'll give that a go. Makes sense. Will have to wait till tomorrow so i'll have to put up with a crippled phone till then!!
I posted about this issue a couple of days ago,I had all the symptoms described.
After using the clear storage option on my diamond,clearing the phone and internal storage then flashing a new rom,the problem seems to be resolved.
I also experienced similar issues yesterday and for the first time ever, during the use of a udK rom.
Update
Grumps said:
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
Click to expand...
Click to collapse
Update : ITs 17 hours later and still going fine. So maybe the reflashing of the stock rom resolved it. I must say the stock rom i flashed is huge. its over 110Mb so maybe it cleaned out all the jazz. Or maybe when i reformatted the NAND it resolved the problem. I dont know. I also did a softreset about 50 times during the night removing the battery every now and then and its still ok. Ill Update again as soon as something Happens
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Im Going to
sakara said:
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Click to expand...
Click to collapse
Ill try another rom tonite probably morn 1.8 or wm 6.5 beta 3. and see what happens
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
goRt said:
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
Click to expand...
Click to collapse
Simply running clear Storage didnot solve my pro...
superpc said:
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
Click to expand...
Click to collapse
Can you kindly write more details?
Is HK 2.03 stock ROM?
Which hardSPL did you have on your device before flashing the HK 2.03?
etc...
Stability Restored
Got mine stable again by following post #10.
Flashed stock 1.93 rom then flashed stock 1.93 spl.
Now back with oli 1.93 hspl and pda corners v3 rom.