hi
i need help after upgrade to tuma 1.4 using a while and then install windows vistam on my laptop i get a regular message on my pocketpc the memory
is insuffection ,i try to move file to my storage disk i try every thing still i get this message need urgent help???
also is no way to downgrade or install a new room
I have searched the forum,but my problem is a little weired,after upgrading my madio and ce rom image load properly but my extension rom does not,ie the autorun gives me a msg saying "customize in 3 sec" but after that nothing happens,tried a hard reset and reflashing(also from the sd card ) but no luck Could anyone pl help me out in this??
You need to go to wiki and read about the ext rom in the kitchen.
Here you will get a better understanding of what it does, how it works, be able to open it and be able to see if you have anything in it.
Try that first then come back with a tad more info.
Hi all dudes, to All chef Rom Cookers and friends,
Actually Am Using Faman 4.02 ROM, but other side getting a huge problem with my TOMTOM 6.03, each time am running it, im getting this message " UNABLE TO START. An Exception Occured : MEMORY ACCESS VIOLATION"
Even I install TOMTOM on the main Memory or SD root, the same problem, The maps are on the SD ROOT.
Well I Need All helps fom All of you brothers.
PS : Even try "Schap's WM6 Pro 4.30 ROMs" same thing.
same errors.
Help needed guys.
I had the same problem some time ago.
What I did is to remove all POIs then try again, if it does not work, this might be some files in your map folder that are corrupted.
I suggest you to copy a new fresh map ...
Thanks bro
Done it,the map was completely corrupted.so reinstall the map and its working like a charm.
Hi
I HardSPL my phone with Hard-SPL-V7 then I have update wm6.1 (OS+5.2.19209+(Build+19209.1.0.2+PV+DVH)+(B&C)+8MB+PP.rar) but
my phone is continuous halting after 5 to 6 hours as well as 1 to 2 days then after halting i have to hard rest the phone to run again. I have change many roms but the halting problem remains same.
Please anybody help me
Regards
you need to flash a stock windows mobile rom. the best seems to be the ATT rom.
Do this before you flash any rom and it is sure to fix your problems.
You are able to find the rom in the WIKI.
thanks for ur reply
i have download rom from wiki but not installing in my phone
actually i have imate jasjam radio version 1.07.03.10. problem is
when i install rom in my phone error occur the rom version problem or cable not connect.
note that i already install hard spl v7. ipl 2.01 olipro
what should i do. may i downgrade radio version before install wiki rom?
please help me
You could try flashing the ROM from the SD Card, I had the same problem and that worked for me. Instructions on how to do so in the wiki.
Thanks hamster, I have successfully install wiki ROM with following steps.
1 - Download wiki rom for my mobile
2 - Download Dutty's Good NBH Tool
3 - Extract .nbh file from wiki rom
4 - Create new .nbh file from Dutty's Good NBH tool
5 - Install new rom from RUUWrapper.exe.
Please tell me now what to do? am i install wm6.1 now?
ialwaywanted, you are using the wrong instructions... What you need to do is format an sd card fat 32. copy the .nbh file onto the sd card and rename it to "hermimg.nbh". Put the sd card back into you phone and go into bootloader(hold ok button above flywheel, power button and use stylus to soft reset. hold all three buttns in until you get to tri-colour screen). It should automatically detect the os upgrade and ask you to push power button to upgrade os. After it finishes soft reset and you will have successfully upgraded os with sd card. I find this safer than using the pc as ther will be no "accidents" with power, usb cable being yanked or resetting of the pc.
Hope this helps..... Cheers...
Yes i have successfully install rom in phone from SD card. Greart its working thanks a lot.
But my actual problem is when i install wm6.1 its stuck my phone on any screen then i hardrest the phone which cause all my installed progam and data was removed from phone.
Please suggest.
I seem to have success with Pdaviet 19900 and 19581. These were very stable for me when others weren't. You might need to experiment with different series of 6.1.
As for backing up everything on my phone, I use SPB backup. Please note however it is a commercial program. Also, you have to be restoring the backup on the same version and series of wm6.1 otherwise you will have problems.
It puts EVERY file back exactly as found so upgrading then running the restore is pointless. You have to find the right rom then backup. Make sure you back up regularly though or else you will find things missing. Cheers....
hey guys,
i've problems to update my pocket pc to mobile 6. I tried both methods no one works for me.
First i tried to connect my pocket to my pc and started windows mobile center. Downloaded all the files, but always when i start the update, my pocket goes to the boot screen with the red, freen and blue stripes and the connection disconnects. And i get the message 260 update problems and my pocket stays at the boot screen. Than i tried the same with Windows XP and ActiveSync, the same problem again.
After that, i tried to update with a micro SD card 2GB. I downloaded the "Hard-SPL-V7"-File and saved it to the micro SD. Rebooted the Pocket, but nothing happend, the pocket stayed in the boot screen. Than i renamed RUU_signed.nbh in HERMIMG.nbh and tried it again, nothing happens.
Can somebody help me please? I want to use mobile 6, because i want to use a 8GB Micro SD.
EDIT: THANKS A LOT, but now i have a new Problem i described it in post #6 in this thread. Thank u 4 helping me.
EDIT II: Thank u all, i fixed it by myself. Finally the upgrade worked with XP and ActiveSync. The best thanks to ultramag69 again, he solved my problem.
If you are using vista you need to install this, removing all older versions
Do you have the newest .net framework on your computer from here?
You wont be able to flash via SD without HardSPL, so you need todo it via activesync.
Try another USB port.
Try flashing the shipped from for your device, you can get your newest WM6 rom from here.
If that fails, tell us:
Whats your device (theres loads of different models of the Hermes)
Have you flashed anything before?
What rom is on your device atm?
What SPL do you have atm? (Hard or not)
Also check your serial number against this list for known problems.
There are certain steps needed to be taken. First is making sure your computer has the .net compact framework. Get it here.
Only then can you run hard spl from your computer.
Also, when you put on a .nbh file onto the microsd and rename it, you need to go into bootloader not reboot. You need to hold the power button and ok button while pressing the reset button with stylus...
I have got the same problem....
Using XP not able to flash neither via Active sync nor by SD card...
Stck at MRH 8.4...
Go to post 1160 on page 116 of this thread to flash Hard SPL using the sd card method - http://forum.xda-developers.com/showthread.php?t=296722
You can't flash using the sd card method without Hard SPL. To flash Hard SPl on you need to do an extra step - flash with soft SPL.
To flash the os just leave out steps 5 & 6 from the above post after you have Hard SPL installed...
Cheers...
Thank you guys for helping me,
A big thank to ultramag69, your post solved my problems. It worked great.
But now i have a new problem. I upgrated the SPL to HardSPL v7 (opipro 2.10). With the help from ultramag69 it worked perfect. Sooner i did the radio update with Micro SD - worked perfect too.
So finally i tried to update the ROM, downloaded the german ROM version from this Thread copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and did a reboot (ok, start and reset buttons) like i did it before. But it shows me at the screen only HERMIMG.nbh and BOOTLADER. When i start the update it runs 2 seconds and i get the message HERMIMG.nbh - OK BOOTLOADER - OK UPDATE COMPLETE. But it doesnt start the WM6 Update. Why not? Can someone help me again please?
I think the only file that's supposed to be on the microsd is the hermimg file...
not sure if having other files there will effect it like that...
Rollswap said:
... copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and... But it doesnt start the WM6 Update. Why not? Can someone help me again please?
Click to expand...
Click to collapse
the only file that you have to copy to your SD card is RUU_Wrapper.nbh (size: about 90 MB) after naming it to HERMIMG.nbh
note that this will up-/downgrade your Radio to V1.47.00.10 so you can also check other available German Versions with other Radio versions on the Hermes Wiki
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
alex8525 said:
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
Click to expand...
Click to collapse
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
zocster said:
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
Click to expand...
Click to collapse
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
alex8525 said:
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
Click to expand...
Click to collapse
Ok so what is the status of your device now, have you flashed back to official shipped rom?
Please try these instructions. also here please view.
If the sd card is more than 2gb it won't be recognised by bootloader. The os (wm06+) is able to detect and read sdhc but the bootloader doesn't.
Did you format the sd card fat32. I know a few people who swear black and blue they did but when I reformatted it, it was registering as being fat.
Did you copy ONLY THE .NBH file to the sd card and rename it to hermimg.nbh? Won't be recognised if you didn't.
These are steps I tend to go through myself as 1 little thing overlooked can mean either nothing happens or disaster....
Cheers...