How do i upgrade jsut a radio? - 8525, TyTN, MDA Vario II, JasJam ROM Development

im new to this.. going to install
Austinsnyc's AT&T 3.62 Clean ROM
onto my 8525 and i just unlocked it via another post on here and it downgraded my radio to be compatible for the sim unlock..
i was reading austinsync's rom's thread and it says its just the rom and splash screen.. no radio .. so im wondering how do i do this before i try to install this rom.. thanks for the help

First, make sure you've got HardSPL installed. Then install a radio seperately. (Instructions for 1.43.00.00, but they apply for most radios.)
You could have learned this by reading the wiki...

N2A said:
First, make sure you've got HardSPL installed. Then install a radio seperately. (Instructions for 1.43.00.00, but they apply for most radios.)
You could have learned this by reading the wiki...
Click to expand...
Click to collapse
i did after i posted it i couldnt find it.. now i got another problem
i installed wm6 but when i click shift on my 8525 some of the shift buttons arent what they are on the keyboard its very confusing any way to fix

Seriously chad, read the wiki, do a search on the forum. The stuff you are asking is so basic and has been covered millions of times. This thread is a total waste.

chad.a said:
i did after i posted it i couldnt find it.. now i got another problem
i installed wm6 but when i click shift on my 8525 some of the shift buttons arent what they are on the keyboard its very confusing any way to fix
Click to expand...
Click to collapse
You caught me in a good mood, which is rare concerning noobs not searching. A hint... bookmark the Search XDA in my sig...

Related

The HTC Guide: Hermes - (04-07-08)

Hey people, since it seems to be getting quite popular heres the official thread for the Hermes upgrade guide ive written.
The guide has now moved to a new host so dont forget to update any links you use!!
The HTC Guide
Individual Hermes guides:
Upgrading ROMs
Upgrading Radio stack
SPL Downgrade guide
Easy custom splashscreens*
TCPMP/Coreplayer video encoding*
Upgrading SPL to HardSPL v7 (2.10.olipro)
Downgrading to WM5*
* Currently updating the guides so please check back
Please read the guide word for word and you should be successfull in carrying out the procedures described.
DO NOT pm me if you have already posted in this thread, i WILL NOT answer you if you do!
Enjoy
This Should Be Made A Sticky Or At Least Added To The Sticky That Points To The Helpful Threads.
Cheers
Great guide. this should help the noobs.
Thanks for your work on these.
MrVanX,
This is nice. Though I do not need it anymore, since I had to read the wiki and all the posts to get to where I am now, I am sure it will help reduce some of the noob questions.
I do not regret doing what I had to do, since I learned a lot during the process.
But thanks for taking the time to make this.
Thank you for the guide, I really do appreciate it.
One question though after doing a search and checking the wiki.
I checked my bootloader and it is 1.10 Oli.
I was going to load the HardSPL v3 prior to upgraded to the 1.38 radio.
One of the choices of bootloader is NOT 1.10 Oli...does this mean I do not need to do the HardSPL? Or do I still need it?
Thanks in advance...and if I missed the thread I'm prepared to smack myself across the face 20 times in restitution.
Jim
Newb-Tech-Realtor said:
Thank you for the guide, I really do appreciate it.
One question though after doing a search and checking the wiki.
I checked my bootloader and it is 1.10 Oli.
I was going to load the HardSPL v3 prior to upgraded to the 1.38 radio.
One of the choices of bootloader is NOT 1.10 Oli...does this mean I do not need to do the HardSPL? Or do I still need it?
Thanks in advance...and if I missed the thread I'm prepared to smack myself across the face 20 times in restitution.
Jim
Click to expand...
Click to collapse
You will notice in "how to upgrade HardSPL v3" the guide says "if your version is 1.10.oli or 1.11.oli select the BLUE OPTION". When you run the HardSPL v3 installer you select the force sspl option. OK?? (i changed the wording of the guide)
Excellent guides...I've updated my sig with new URLs..
U Da Man!
mrvanx said:
You will notice in "how to upgrade HardSPL v3" the guide says "if your version is 1.10.oli or 1.11.oli select the BLUE OPTION". When you run the HardSPL v3 installer you select the force sspl option. OK?? (i changed the wording of the guide)
Click to expand...
Click to collapse
Noted and thank you.
Jim
What a great guide - would have saved me endless trouble when I started upgrading (including my brick - repaired courtesy of Vodafone ) - but then again I've also learned loads the harder way.
Can you just write a guide on Un-Bricking, Cooking Roms, Installing apps, Creating Cabs, Searching, Reading the Wiki etc, etc (Hmmm, now there's a project)
Only kidding, but maybe if we can link this guide and the Unbricking thread to be the first thing a new member sees when they sign up as a member to the forums we may see less 'help I'm a ****wit' threads
Excellent guide!
Just wondering, will you be creating a "downgrade guide" for those who wish to revert everything back to their original state (OS ROM, Radio ROM & bootloader) for warranty purposes?
Thanks!
michaelfoo said:
Excellent guide!
Just wondering, will you be creating a "downgrade guide" for those who wish to revert everything back to their original state (OS ROM, Radio ROM & bootloader) for warranty purposes?
Thanks!
Click to expand...
Click to collapse
Yes, pls create a "downgrade guide" for us newbie in case we need to send in our device that is under warranty.
SPL Link broken?
Hi, it might just be my system but the SPL download link appears to be broken
Martyn
Link fixed, thanks for the heads-up!
Sorry Radio link seems broken too.
Hi, sorry to be a pain but I'm following your advise and going through the guide step by step and can't download the radio.
BTW: The SPL worked a treat, I'm planning on trying the LVMS flavour.
The links for the Radio are all working fine, are you using Winrar?? You need it for opening the radio package.
-----------------------
Bump, guide updated for HardSPL v4
mrvanx said:
Bump, guide updated for HardSPL v4
Click to expand...
Click to collapse
Hi Great Works...
But need update main menu...
Flashing individual components:
HardSPL v3
Radio v1.38.00.10
WM6 ROM Upgrade Guides:
Click to expand...
Click to collapse
V4 and not v3
Hi
I'm quite a noob, so I apologize if i ask for something already mentionned.
I'm on SPL1.09 after install of LVSW 03/20.
I want to install HardSPL v4.
- This means only the bootloader files of the rom will be modified. Am I right ?
I need to check the yellow line.
But do I need to check "Is it hardSPL" ? What is this for ?
Then, as I understand, if i install a new ROM with radio, it'll modify the SPL again ?
Thanx
Greg
sticky sweet

Stoopid noob needs advice,please dont flame.

Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony
You really have a lot of reading to do. So much that we cannot post it all here. It has taken an entire forum for all of the information. You need to start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Get familiar with what you can do. First thing you are going to want to do is update the boot loader so you don't brick your device. Read here for more information:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
maxoutput said:
Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony
Click to expand...
Click to collapse
Do not "just install" ... ideally read the wiki first, and then follow instructions on Mrvanx's Guide. Upgrading is pretty painless and easy ... and the guide should keep you on track.
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
If you follow the advice in link #3 above you wont go wrong.
The site referred to gives you all the knowledge and confidence to do the job.
Trust me I learnt the same way, by reading threads.
good luck!
Sorry peeps,just reading the guide above.I typed before i looked,hopefully all will become clear....ish lol
maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
Here is the list you wanted:
Read the wiki
Read the installation guides.
Read the threads concerning the threads on available roms.
Understand what you have read.
Flash your phone.
Here you go... step by step list of everything you need to do to upgrade to the Black 3.0:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=45&Itemid=26
Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.
maxoutput said:
Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.
Click to expand...
Click to collapse
My subjective pick is Black 3.01 ...
Remember to go "Hard SPL" first, and that you need to upgrade your radio seperately.
Right just updated the Hard splv7 and my radio to 1.41.00.10,ive also flashed with black 3.0. Now i cant seem to get a wireless link to work or turn on my bluetooth?
Also does this mean i can flash any cooked rom?
Many thanks Tony
Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony
maxoutput said:
Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony
Click to expand...
Click to collapse
generally speaking, yes.... but be sure you are flashing OS only (unless you want to upgrade your radio too). Most folks are putting out OS only upgrades now, but some replace the radio. once you are hard spl and no longer a flashing virgin, it becomes second nature.
Thanks for everyones help,all sorted,nice one!
Wow what a refreshing read. A noob explaining himself and asking clear questions and members helping him out in an open and non-judgemental way...
Well done everyone!
...and no flames...
Kudos go to MrVanx for those incredible guides.
Yep superb guides and a very noob friendly thread,thanks again peeps.Flashed to a couple of different roms today to check them out.

WM6 update sticking at 28%

Hi all, new to all this.
I have spent the last 6 days scanning the forums and wiki about upgrading to the offical rom for the trinity to WM6.
I have tried super cid and sim unlocks as well as Hard SPL and many other tricks and advice from users.
None of them seem to work.
Does anyone have a real idea (a proper technical answer) as to why the progress stops @ 28% on this update and not on any of the cooked roms?
I would really appreciate some help on this.....
Thanks all
walterjm
search on top is your friend
udK said:
search on top is your friend
Click to expand...
Click to collapse
I know, but I have been using this for Six day's and tried all avenues. The reason to ask here is one of frustration.
But thanks anyhow....
my guess is something about the ipl or spl, since after you remove those and put it in a modified RUU it works..
racerx_ said:
my guess is something about the ipl or spl, since after you remove those and put it in a modified RUU it works..
Click to expand...
Click to collapse
Hey thanks for the tip will keep looking and learn how to modify RUU file...
Cheers
walterjm
racerx_ said:
my guess is something about the ipl or spl, since after you remove those and put it in a modified RUU it works..
Click to expand...
Click to collapse
OK I am completely stupid. Can anyone point me in the correct direction on how to modify RUU files.
Please please please...
I have the following in the bootloader menu
IPL-1.00
SPL-1.30.Olipro
Should I be able to load the official WM6 rom from HTC?
yeah, technically...
why don't you try the official rom without SPL?
You can get it here:
http://forum.xda-developers.com/showthread.php?t=324744
racerx_ said:
yeah, technically...
Click to expand...
Click to collapse
ok I found the answer....
http://forum.xda-developers.com/showthread.php?t=321182&page=7
..........................................
http://rapidshare.com/files/47349234...nospl.rar.html
First flash hard spl before flashing this rom!
http://forum.xda-developers.com/showthread.php?t=299659
And dont hold me responsible if this update fails for you.
It worked fine for me.
Spl and Ipl are removed , and splash screens changed to htc screens.
Thats all , so it still has latest radio and extrom.
I advise you to soft reset when you first boot your trin and see the screen that says customization will start in 3 seconds.
...................................................................................
this is the only way I could do it. Something is no quite correct with the
I think the guys at this thread need to revisit there ideas......
http://forum.xda-developers.com/showthread.php?t=299659
because it does not work ...
cheers walterjm
[email protected] said:
why don't you try the official rom without SPL?
You can get it here:
http://forum.xda-developers.com/showthread.php?t=324744
Click to expand...
Click to collapse
Hey I was typing the response as your did also....
I think this is what I did. Works great. Still seems to be a problem.
Where can I learn more about spl, ipl, hard spl and all those technical terms...???
cheers walterjm
http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
XDADeveloperWiki - HTC_Trinity
Also search with google - go to advanced search and search http://forum.xda-developers.com for the above terms - you'll learn lots!

Question on flahs rom with Unsigned-Hard-SPL-Diamond-OliNex

Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.

noob i'm afraid.

I'm wanting to get WM6.1 on my Orange (UK) SPV M3100, so i'm following the instructions at http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
My question is:
There appears to be hundreds of roms to download.
Which one should I download?
Many thanks,
Ian.
Let the flaming begin
shanetheclassic said:
Let the flaming begin
Click to expand...
Click to collapse
NOT on topic or helpfull, better off NOT posting at all sir. We were all noobs once.
@djsky123, take some time to read through the threads in this forum and familiarise yourself with the ROMs currently alive....CRCs, PDAcorner and MRH seem to be the current ROMs in progress..
I think CRC's ROM is probably the best in existence...
I might have a little bit of bias though
Seriously though, have a read through what is included on the ROMs and see what fits your personal tastes...
Just make sure you flash your device with HardSPL first to prevent future tears...
CRCinAU said:
I think CRC's ROM is probably the best in existence...
I might have a little bit of bias though
Seriously though, have a read through what is included on the ROMs and see what fits your personal tastes...
Just make sure you flash your device with HardSPL first to prevent future tears...
Click to expand...
Click to collapse
Well, yeah... i took the plunge and did your 6.1 release 11.2 (hope you don't mind).
Seems good so far. - The wife's asking when my grandad died though.. took a bit of explaining why I had someone elses on my phone...
Thanks for welcoming me, and I'm sure i'll be on here over the coming months.
djsky123 said:
Well, yeah... i took the plunge and did your 6.1 release 11.2 (hope you don't mind).
Seems good so far. - The wife's asking when my grandad died though.. took a bit of explaining why I had someone elses on my phone...
Thanks for welcoming me, and I'm sure i'll be on here over the coming months.
Click to expand...
Click to collapse
On the first few pages of this whole list there is a kitchen to make your own splash screen, or even some have posted stock screens that some people pulled out, enjoy xda, it's the coolest place for your hermes.
zocster said:
....enjoy xda, it's the coolest place for your hermes.
Click to expand...
Click to collapse
it really is. but a warning to you, READ AS MUCH AS YOU CAN!!!! knowledge is power in this forum (it works as currency too)
Can I Just ask, now that i've flashed my hermes with a new rom, is it now un-locked so that I can insert sim cards from other networks in it? I was on orange UK but want to use an O2 sim in there at some point.
Cheers.
djsky123 said:
Can I Just ask, now that i've flashed my hermes with a new rom, is it now un-locked so that I can insert sim cards from other networks in it? I was on orange UK but want to use an O2 sim in there at some point.
Cheers.
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/showthread.php?t=293665
So the answer is no, and I need to also flash something called a "Radio Rom" ?
djsky123 said:
So the answer is no, and I need to also flash something called a "Radio Rom" ?
Click to expand...
Click to collapse
The answer is "no but its easy to, by reading that topic and using that tool"
djsky123 said:
I'm wanting to get WM6.1 on my Orange (UK) SPV M3100, so i'm following the instructions at http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
My question is:
There appears to be hundreds of roms to download.
Which one should I download?
Many thanks,
Ian.
Click to expand...
Click to collapse
Dear Ian,
I cannot tell which ROM to flash because it depends on MANY things... Nevertheless i can tell you a few things thay will help you...
1. Read the Flashers BIBLE i.e. the WIKI.
2. Never, but NEVER mess or tamper with our PDA unless you are sure of what you'r doing BEFORE you do it. If your are not sure ask before.
3. Never pay attention to flames or stupid answers. You will get quite a few over here...
4. I was oncve a noob and i know how it feels to e stepingon muddy watters.
5. If you feel you get no positive answer to your questions, PM me at will and i will try to help.
Cheers, welcoe and good luck
no you need to run an unlocker not flash the radio you can get the unlocker for the hermes from here if its a g3 http://forum.xda-developers.com/showthread.php?t=293665
first of all do Hardspl, this will unlock your device too.
remember - when you flash any official rom you automaticaly erase hardspl. suggest you to try some pdaviet roms, for noob they are very nice. but if you need stability - try pda corner e.t.c. by the way - Im using spv too
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
djsky123 said:
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
When you get to a ROM-specific issue, it is best to post in the specific thread for that ROM (helps keep the forums organized and helps you get an answer more quickly)
Welcome and best of luck!
Click to expand...
Click to collapse
djsky123 said:
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
6.2 is oldd.. the newest version is 11.2, maybe you should try flashing that and seeing if it is fixed.
If it keeps on, try asking in the 11.2 thread.
Click to expand...
Click to collapse

Categories

Resources