I have an O2 Orbit with German WM6 installed. I had the same problem previously with WM5.
I attempt to connect with my HAMA Clipper Handsfree. The Orbit says it cannot find any BT devices. The I tried my HS515 BT headset, again the Orbit says it cannot find any BT devices. The HS515 has been reset to the factory standard.
The Orbit is configured as visible and both of these devices pair successfully to a Siemens SX1 and a MOTO RAZR. The only thing that works is the BT LED on the Orbit. Am I missing something or is the Orbit defective?
It appears to be a Profile Problem as the Orbit finds other BT Telephones. Any ideas? A hard reset did not help either.
Problem solved.
Alors ?
can you post the solution please... i think it could help me...
Thanks
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
To all, I`ve just updated my Artemis with WM6, now I`ve the following problem. When the Artemis is connected via bluetooth with my car handsfree unit, there is no sound output form Tom Tom. If I swich of the bluetooth connection ist works. But that can`t be the solution, because with WM5 it was working.
Thank`s for your help
Hi,
I am trying to get my XDA Orbit to connect to my new Mondeo via the Bluetooth facility supplied with the car. The phone can see the car OK showing up "Ford Audio" and connecting to it, but the car can't see the phone.
I have seen postings suggesting there is an error with the Bluetooth stack on the WM6 version, but how do I get round this? Mind you, I have never used the XDA with a handsfree kit before so is there some sort of setting I need for a handsfree I don't know about?
Any help gratefully accepted.
Thanks
Jon
p.s. This is an official O2 WM6 version CE OS 5.2.1238 Build 17745.0.2.3
Normally, with a headset, you cannot 'seek' the phone (no screen). You have to put the headset in 'discoverymodus' and then look for it on the pda. A headset has a solid pairkey, usually 0000.
When you have a advanced system as you mention in your Car, there perhaps also is a possibility to look for the ppc on the system of the car. If this is the case, you have to put your ppc in 'discoverymodus'. To do this, go to settings, tab connections, bluetooth, 2nd tab 'mode' and select both checkboxes. press ok.
Then look for it in the cars system.
Thanks, it is now working
Thanks for the tip, I tried this then found the info in a thread for another handset (Hermes) here:
http://forum.xda-developers.com/showthread.php?t=338663&page=2
The problem/challenge was part XDA, part Ford. Where else apart from XDA Developers would you get an answer !
Cheers
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...
I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100
I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards
Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING
Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards
Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.