Big Storage? - 8525, TyTN, MDA Vario II, JasJam ROM Development

With all these roms with "Big storage", doesnt that mean we are taking memory for the OS? Dont know about you but i store all my info and files on the micro sd so storage isnt the problem but the OS running low on memory to the point that either the programs like "iGo" wont run. Anyone have any idea to set BIG memory if possible so my 8525 will have the memory it needs to run programs?

No you are way off track on what you are thinking Programs need RAM to run which you can add more by increasing the Pagepool we increase the PROGRAM storage if you run out of ram you should get a kaiser I have never run out and I have loaded and run every app I can at the same time

How does increasing the page pool give you more ram?

I agree, it would be nice to have max ram and just enough for storage for essential programs. I have a fast 6gb microsdhc and install everything on that instead.
Chris

i use iGo for my gps. It will say that I have no ram left, and when I check what other programs are running, i have to basically close everything down to use the program. In my older pdas running windows mobile, I had the option to toggle more storage to ram or visa vera but with wm6 I cant. Is there a hack to have more ram for the os.
The more you use the phone, even with all the programs closed the more ram it will use. Only why to clear the ram is to do a restart.
So if anyone knows a reg hack or something please share, cause so far cant find anything

To clarify (this is my understanding)
The total memory on your device is split into say 4 sections when you get it.
Program memory (RAM) -cleared on a soft reset, only holds running processes etc. CANNOT BE INTERCHANGED WITH OTHER MEMORY _ IS BASICALLY FIXED - except for Page Pool.
Storage - where you store programs/files that are not in the ROM
ROM - where the os lives
Extended ROM - additional ROM space.
Now, certain advances mean that
1. Spare space in the ROM image can be freed up and added to Storage memory - this was the original big storage adjustment
2. the Space used by the extended rom can now also be merged to Storage memory - this is the REAL BIG Storage adjustment.
3 The page pool is like a quick access holding area that the system uses to keep files it uses lots. this is part of the program memory but te system does not report it as such. Hence your total program memory plus your page pool is your real program memory. Thus, reducing the page pool will add to program memory. this may impact the performance of your system however.
All this is only my basic understanding.

crazyC said:
All this is only my basic understanding.
Click to expand...
Click to collapse
... and it is completely correct. To say it very clear again:
RAM is physically different memory (different chips) from all other memory. There is no way to get more RAM by sacrificing some storage memory.
That only worked in Windows Mobile 2003, because there also Storage was in RAM. This was changed in WM5, so that data will not get lost when the battery is removed.
Cheers
tadzio

Thanks, that clears that up....lol.
Chris

Memory info
Hi,
I did a little summary of PPC memory here which might be helpful as well.
Best wishes,

Storage Memory Problem
crazyC said:
To clarify (this is my understanding)
The total memory on your device is split into say 4 sections when you get it.
Program memory (RAM) -cleared on a soft reset, only holds running processes etc. CANNOT BE INTERCHANGED WITH OTHER MEMORY _ IS BASICALLY FIXED - except for Page Pool.
Storage - where you store programs/files that are not in the ROM
ROM - where the os lives
Extended ROM - additional ROM space.
Now, certain advances mean that
1. Spare space in the ROM image can be freed up and added to Storage memory - this was the original big storage adjustment
2. the Space used by the extended rom can now also be merged to Storage memory - this is the REAL BIG Storage adjustment.
3 The page pool is like a quick access holding area that the system uses to keep files it uses lots. this is part of the program memory but te system does not report it as such. Hence your total program memory plus your page pool is your real program memory. Thus, reducing the page pool will add to program memory. this may impact the performance of your system however.
All this is only my basic understanding.
Click to expand...
Click to collapse
Thank you very much! This explanation is very useful.
Now I will need some help from the more experienced users...
I'm using a T-Mobiles MDA (838Pro) running WM6, CE OS 5.2.1437 (Build 17944.0.3.1).
For the last month or so, I kept getting messages to say that my Storage Memory is critically low.
I have all my documents, ring tones, music, photos, video, etc. saved on my storage card. So there is practically nothing stored in the device ROM. I've checked all folders under "My Device", and there weren't really a lot of files in there.
I've used Oxios ClearApp and Hibernate to do clean up a few times a day. But that doesn't seems to help.
I've installed Clear Temp and use that to clean up the temp files. It works for a few days, but then the problem returned.
I've even deleted some programs, but it looks like whatever gets freed up will just be quickly be eaten up again.
Has anyone even experienced or heard of something similar? If so, please help!
Thank you very much!
John

Storage Memory Problem
jso905 said:
Thank you very much! This explanation is very useful.
Now I will need some help from the more experienced users...
I'm using a T-Mobiles MDA (838Pro) running WM6, CE OS 5.2.1437 (Build 17944.0.3.1).
For the last month or so, I kept getting messages to say that my Storage Memory is critically low.
I have all my documents, ring tones, music, photos, video, etc. saved on my storage card. So there is practically nothing stored in the device ROM. I've checked all folders under "My Device", and there weren't really a lot of files in there.
I've used Oxios ClearApp and Hibernate to do clean up a few times a day. But that doesn't seems to help.
I've installed Clear Temp and use that to clean up the temp files. It works for a few days, but then the problem returned.
I've even deleted some programs, but it looks like whatever gets freed up will just be quickly be eaten up again.
Has anyone even experienced or heard of something similar? If so, please help!
Thank you very much!
John
Click to expand...
Click to collapse
Dear friends:
Things have gone worse... My Storage Memory has dropped so low that I can't even send out any long SMS anymore.
It looks like I might have found where the problem is, but still don't know how it happened and how to solve it.
First, when I open Settings>Remove Programs, I see that practically all the appication programs are listed under "Programs in storage memory", including those that weren't even installed by me, like "Cyberon VoiceCommander". I'm not sure whether this is talking about the same "Storage Memory". But I thought that when I choose "Install in My Device" when installing a program, it is supposed to go into the "Program Memory", not "Storage Memory"?
Secondly, I took a closer look under "File Explorer", and I've finally found a few files that are very large size:
pim.vol (in root directory), 6.35MB
cemail.vol (in root directory), 412KB
compimeh.0904 (in Windows directory), 16.8MB
It also looks like these files will be amended every time when I do an ActiveSync. Not sure whether this is what caused my Storage Memory to go down everyday.
Has anyone experienced something similar? Would anyone have an idea of what these files are and whether it is safe to delete them?
I really appreciate if someone can help!
Thank you very much!
John

Thanks to those who were reading and trying to help. I have part of the mystery solved.
From this thread: http://forum.xda-developers.com/show...=compimeh.0904
I learnt that the file compimeh.0904.dat is in fact the dictionary that the Hermes used to autofill when we type our e-mails and messages. It will keep growing as we use those functions.
I have followed the instruction on the thread and deleted the file. Now I have 16.8MB back.
But I still don't understand how 30MB of my Storage Memory would be occupied. If some friends here can shed some light, it would be most appreciated.

Related

Q's to all you that upgraded to WM5 ...of a non-XDA user

I hope I am welcome here even though I don't own an XDA.
So if someone (or more than one) that already has WM5, can give a few answers to us people just waiting to see WM5 on their machine, please do.
No more blah blah, here are the questions:
1) A clean (after hard reset) device BEFORE WM5 and AFTER, felt the same "speed"? (I am not saying it would be indeed slower or faster, but you know, the feeling you get from the GUI)
2) Memory... many things to ask here (the really interesting part)
a) Is the infamous memory slider (in "memory" settings) still there in WM5? A screenshot would be nice.
b) How much RAM ("total main" as WM2k3 calls it in "memory" settings) and how much internal storage (I don't know how it's called for XDA) was available BEFORE and AFTER upgrade?
c) You can still install software in RAM or not? What changes when choosing install location? Can you still select "default" (and where does this install the program?), internal storage and memory cards when installing?
So w.t.f. is that with the new memory model? Does it have any effect on anything? This is the most confusing part.
3) XDA has bluetooth right? WIFI? (sorry I don't remember) For both, there was a Microsoft bug (more or less in ALL wireless capable devices) that could lead you to not be able to turn on one of the wireless (or both), because the stack kept for the driver(s) was full and a soft reset was needed. Is this still an issue?
Thank you in advance. As you understand what needs clearing out mostly, is this thing with memory and storage...
1) A clean (after hard reset) device BEFORE WM5 and AFTER, felt the same "speed"? (I am not saying it would be indeed slower or faster, but you know, the feeling you get from the GUI
Answer: I found the device little slower on clean startup than on clean win2003-2003SE (Note: There are some new additional startup processes in win5 like BTIcon,SMSreceiver,Bpinsert) ..I can do some benchmark and upload results tomorrow.
Memory:
a) Is the infamous memory slider (in "memory" settings) still there in WM5? A screenshot would be nice.
Answer: There is no memory slider anymore. This means you cannot allocate manually more or less memory.
b) How much RAM ("total main" as WM2k3 calls it in "memory" settings) and how much internal storage (I don't know how it's called for XDA) was available BEFORE and AFTER upgrade?
Himalayas model (known as XDA2-MDA2) have 64Mbx2 RAM+16Mb Storage+16Mb Extended ROM+ROM.Read Wiki for more informations related to memory allocation on Himalayas devices.
In Win2k3 RAM usable was 125mb,on Win5 118.34mb.
Like I said before there is no slider to adjust memory but a user made avaiable a program that let you partition memory as you like,
(Example: you can allocate 100Mb for Program usage and only 18Mb to Storage).
Also we have found 10Mb or more free memory from ROM that can be used as Backup-storage or whatever you like,by re-allocaing it.
c) You can still install software in RAM or not? What changes when choosing install location? Can you still select "default" (and where does this install the program?), internal storage and memory cards when installing?
Answer: Yes,you can still install software to:
-RAM (Storage part)
-Storage
-Extended Rom (if unlocked and unhided)
-Storage Card
Now it is present an installation manager that let you choose the install location.
So w.t.f. is that with the new memory model? Does it have any effect on anything? This is the most confusing part.
Answer: Basically the memory have another format now and after a Battery power loss all the Data remains intact.
The Win5 registry sets the last default settings on every Soft-reset (until you disable this feature).
3) XDA has bluetooth right? WIFI? (sorry I don't remember) For both, there was a Microsoft bug (more or less in ALL wireless capable devices) that could lead you to not be able to turn on one of the wireless (or both), because the stack kept for the driver(s) was full and a soft reset was needed. Is this still an issue?
Answer: No native Wi-Fi for Himalayas model.But works with SDIO Card.
New program on settings/power/wireless let you choose what Radio activate without any encountered bugs till now.
Microsoft Bluetooth Stack was greatly improved by less power consumption,new menu to COM Ports.
thanks man
this mostly answers my questions although the new memory thing is still not very clear
you say you can still install in RAM's "storage" part, but this is not official but can be done with the program from the user you talk about? (where is this btw?)
or there is still a RAM "storage" part like in WM2k3?
as for the power loss thing... you mean even RAM "storage" contents remain? sure?
sorry, I may sound stupid but believe me the confusion is common to everyone that hasn't seen WM5 yet (so I dare be stupid and help others not to be)
thanks again

T-Lite! SuperStorage Rom

Warning: This flash will overwrite your extended_rom!
This rom is very similar to my Dopod Lite (now D-Lite!, I just thought of it!) rom, however, this one is based on bepe's modified T-Mobile 3.6 rom, so it converts your extended_rom memory into additional storage memory. Until I can figure out exactly what bepe did and apply it to the D-Lite rom, I thought I'd put this out there for all you storage memory freaks. (You know who you are.) This is pretty much equivalent to my DopodLite V1.0, so you can read that thread for info about what it looks like, and what I've done to create it. I hope it proves to be just as stable.
Like the Dopod version, this is meant to be a stable, fast starting point for your own creativity. It's much easier to mix and match applications after flashing than before. If you get tired of a particular app, just remove it and try another. If you get tired of a particular skin, try a new look. There's plenty of stable, fast storage memory for loading your today screen utilities, phone apps, voice dialers, animated screens, etc, etc.
This rom does not have: Transcriber, voice dialer, catalog, error reporting, autoupdate, phone home (ceipui), games, calculator, some audio files and other odds and ends. It does include: Office 2007 (No OneNote. Thats not particularly useful unless you have it on your desktop, in which case it installs automatically anyway.), Java, .Net, all the Bluetooth and security stuff, MMS, Camera, and the rest of the basic functionality. If you want transcriber or a voice dialer or games feel free to add them. Ditto for the calculator, which needs replacing anyway.
At cold boot:
4mb page pool: 71.47 mb total storage, 67.10 mb free storage memory, 31.19 mb free program memory. If you delete the startup folder shortcuts, the program memory goes to 31.97 mb.
6mb page pool: 67.10 mb free storage, and program memory is 29.08, and 29.87 mb respectively.
T-Lite 4mb Rapidshare Link
T-Lite 6mb Rapidshare Link
Additional FTP mirror, courtesy of claymen
Enjoy!
Other Stuff
Functionality links:
Cingular 8525 keyboard fix
Cingular WAP settings
Lots of CABs
Lots more CABs
Lots of freeware
Can you make a screenshot of it m8
Great work btw!!
Re: screen shots
It looks just like the DopodLite, except the phone has a T-Mobile skin. I have some screen shots in the Dopod thread. (see my sig)
I'll try to put some here soon.
roms not bad just feedbacking from day of flashing roms thanx
edhaas... downloading now, wil give a run later on!
problem with the wifi it dosn't connect
edward
update:
wifi is ok now after HR
Re: WiFi
edward-riko said:
problem with the wifi it dosn't connect
edward
Click to expand...
Click to collapse
Hi Edward,
Got me nervous (I hadn't checked it), but I'm connected with my home network now. You may have to look up the registry setting to activate "G" capability if your home network is set up for "only G". (Or use a tweak utility that does it for you.) I'm running "G", with a linksys router with WAP, AES security. Works well.
Good luck!
Build No.
Any idea what build number is this ROM (e.g 1620 ....)
--
Thanks
se1095 said:
Any idea what build number is this ROM (e.g 1620 ....)
--
Thanks
Click to expand...
Click to collapse
CE OS 5.2.1620 (build 18125.0.4.2)
To provide my feedback after a couple of hours using....
No problems encountered so far, 3G or WIFI working
Edhaas, as I am really crazy for more RAM, just a suggestion:
Removing application that is rarely used i.e. internet sharing, midlet manager, SAPsettings, streaming media, customer feedback, error reporting and some of the ringtones i.e under the windows\rings folder.
A noob question, noted that from Settings>About>version, the memory in is only 51.02 MB while the total/free storage memory is more than this. Is there any 'truth' in the version memory or just a display?
rgds
Memory discussion!
alancstan said:
To provide my feedback after a couple of hours using....
No problems encountered so far, 3G or WIFI working
Edhaas, as I am really crazy for more RAM, just a suggestion:
Removing application that is rarely used i.e. internet sharing, midlet manager, SAPsettings, streaming media, customer feedback, error reporting and some of the ringtones i.e under the windows\rings folder.
A noob question, noted that from Settings>About>version, the memory in is only 51.02 MB while the total/free storage memory is more than this. Is there any 'truth' in the version memory or just a display?
rgds
Click to expand...
Click to collapse
Happy to help. Glad you're liking the rom. I'm not finding much different in feel from the D-Lite rom (which is a good thing). Everything is working well for me as well. HSPDA, a2dp, wireless stereo over wireless radio in sleep mode sounds great. No lockups so far. All my apps work as before.
Tutorial regarding memory: In this rom there are two types of built in memory, storage memory and program memory. They are physically different and cannot be interchanged via programming. In other roms, the storage memory is broken up and part if it is used as "extended_rom" which is meant to be hidden and used by carriers to put their particular customizations in, which are generally only used once after a hard-reset. This partition was about 10mb in size. Bepe has figured out a modification, which removes this partition and makes the user storage partition (where programs are stored, similar to a disk drive) correspondingly larger. Another partition is used to store the base programs which are "flashed" and include the operating system. Tadzio figured out how to move the boundary of this partition so that smaller roms will free up more storage memory as well.
So, end of history lesson. The storage memory is what is left after all of this, and is used as a "disk drive" equivalent, it is slower than the "program memory" which is like "ram" in your computer. However, storage memory is generally faster than SD card memory, and is preferred especially for "resident" or today screen type programs, because it's instantly available when you first turn on the device. Most of what I and others have done is to maximize the amount of this memory which is available to you, so you can fill it up with programs that load more quickly than if you put them in SD memory. In this rom that free space starts off at 71.47 mb, and then at start-up the operating system allocates some for it's own use, and in other roms customization programs loaded after cold reboot are loaded in there. So, in this rom there are actually 67mb available for the user to play with, which is a ton, and pretty much overkill for 99% of people including myself. As long as there are around 10mb free for the system, the device will work well.
Program memory is "ram". It is the fastest memory and programs in actual use are executed from there in chunks loaded from storage or SD card memory. It starts as 64mb, but the device uses a good chunk of it internally which we have no control over, and so reports the 51.02 mb as what is initially available. However, an additional chunk is used by the operating system, of around 15 mb, leaving the rest for us to actually use. The page pool, which is a buffer used between ram and storage memory comes out of this, as does the ram used by any start-up programs. Generally, as long as you have about 5 mb or so available, the device works pretty well.
[Edit: Addendum: In this rom I have removed error reporting and customer feedback, I'm having more difficulty removing the icons for them however. The other things you mention could be removed, but this would reduce functionality for folks who use those things, and would only add slightly to available storage memory, which as I stated above is already in the "overkill" category. I'll probably cut some more stuff in later versions as I gain experience with this rom, but I doubt there will be any noticeable difference in performance or usability.]
This is a bare-bones account, but hopefully will help you conceptualize things.
Best wishes, and enjoy!
Enjoy the silence!
Added addendum to above. Also I want to report over 50 downloads in less than 24 hours, and no real problems reported. Sounds like another quietly effective launch!
Enjoy your weekend!
Jbed Java MIDlet manager 20070622.2.1 installed but the manager application doesn't opens
edward
ROM hangs and then Hard Resets
Hi Edhaas,
I'm facing issues of Hard Resets.
This is already happenning twice in a day.
I do not have this issue using your last v1.2 versions.
Regards
Fei Yu
fychan,
Y do u need to hard reset? Pls elaborate...
rgds
alancstan said:
fychan,
Y do u need to hard reset? Pls elaborate...
rgds
Click to expand...
Click to collapse
The device hangs randomly.... and once u do a softreset....
It then turns out it hard resets itself.
I'm not sure if its due to MortPlayer?
Anyone have this issue?
Regards
Never experience the problem u encountered... never install MortPlayer
Try running the rom without MortPlayer, c what happen!
rgds
@fychan, I run mortplayer and was going to flash this rom tonight.
What version of mortplayer are you running?
I am currently running 3.31b61 on edhaas's d-lite without issue.
However, on past roms (black 2.5 thru satin and sleuth's developer 2 and 3) I discovered that 3.31RC7 was more stable.
Perhaps downgrading might solve your issue.
fychan,
I can't seem to replicate your issue.
Are you running anything else that might be leading to your strange problem? I ran the latest mortplayer build, playing for a while, pausing, turning off and on, resetting... At no time did my machine reset itself.
BTW, from the little I did see, it looks like a fast little rom here. I can't keep it though as it has the sms/mms together.

Modifying size of available Program Memory?

Has anyone figured out a way to "move" Storage Memory or ExtendROM memory over to Program Memory allocation?
I am typically left with 13-14mb of free program memory with the device sitting idle with only system resources/background apps running and would like to re-allocate unused storage as volatile ram to allow me to run more foreground apps at one time. As it stands I can only get 2 or 3 before WM starts automatically closing down apps.
I'm sure this is some serious hacking...if at all possible.
TIA
you dont mention what wm version you are using but with wm2003
there is a slider
with wm5 and up memory is not shared anymore and all real memory is used for applications
and storage is always flash
flash like cd-rw discs have a limited writes before it dies
and it read and writes much much much slower then real memory
which is why these devices use pagepool to speedthings
up
so one cant make virtual memory out of the flash
and if one could it would maybe slow the devices down
OS version in my signature but yes will be more clear next time
(Even though I did search before posting and didn't find anything) I now recall a discussion on this stating exactly the same conclusion.
Thanks for the info mate!

Ram availability and Wm 6.1

So I am seeing all these wm 6.1 with very low amounts or ram in them. Is low ram the norm with 6.1? How do people get their ppc's to run properly with only 20 mb's of ram to start?
bartybet said:
So I am seeing all these wm 6.1 with very low amounts or ram in them. Is low ram the norm with 6.1? How do people get their ppc's to run properly with only 20 mb's of ram to start?
Click to expand...
Click to collapse
I'll follow with a really ignorant question.. is there any way to shift the memory to program RAM vs storage? ie. I've got a 6G SDHC card.. I don't care about "bigstorage".. I'd rather see "bigRAM" builds.. but since I've never seen a single one, I'm guessing that isn't possible.. I suppose the flash ROM wouldn't have the write cycles to act as a RAM...
zim2dive said:
is there any way to shift the memory to program RAM vs storage? ...
Click to expand...
Click to collapse
Not that i know of past 2003 ppc's. But i find it odd that the cooked 6.0 roms all have close to 30 mb's of storage and these new ones cant crack 22 mb's. Odd.
bartybet said:
Not that i know of past 2003 ppc's. But i find it odd that the cooked 6.0 roms all have close to 30 mb's of storage and these new ones cant crack 22 mb's. Odd.
Click to expand...
Click to collapse
I thought I remembered such a function from my X50v days..
For an in-depth discussion on this topic, you can start out with this thread. Don't be afraid to click on the links within for a very complete understanding of why Program Memory and Storage Space cannot be resized (unfortunately).
-pvs
Don't get it.
I really don't understand at all the drive for larger and larger storage. So what if you have 58MB of "Big Storage" on the device. With SDHC cards growing ever larger at lower costs, the issue, it seems to me, is not device storage as much as Free Program Memory.
I have looked with interest at the new 6.1 ROMs until I search through the posts and find that, at startup, the more desirable ones (with the features I would like), have Free Program Memory in the very low 20MB range. Just load PIE and another memory hog like an audio player and watch your memory drop to less than 4MB and your PIE freeze.
Sorry, I am running a 6.0 ROM with everything I like on it and have about 24MB at startup. I use FreeUp RAM a couple times a day to recover Program Memory and everything is fine. I don't like running this lean and am considering upgrading to a Tytn II (AT&T 8925) with roughly double the memory of the Hermes so I don't have to worry about memory any longer. For me, the 6.1 ROMS with anything worth running and the current memory on the Hermes just doesn't make it. And I love the 8525.
zim2dive said:
I don't care about "bigstorage".. I'd rather see "bigRAM" builds..
Click to expand...
Click to collapse
You are damn right!! Thats my opinion too!
JamesAllen said:
I really don't understand at all the drive for larger and larger storage. [...] With SDHC cards growing ever larger at lower costs, the issue, it seems to me, is not device storage as much as Free Program Memory.
[...] Just load PIE and another memory hog like an audio player and watch your memory drop to less than 4MB and your PIE freeze.
Sorry, I am running a 6.0 ROM with everything I like on it and have about 24MB at startup. I use FreeUp RAM [SkTools!] [...] to recover Program Memory and everything is fine.
Click to expand...
Click to collapse
I've the same setting like you, I am running a clean WM6 with my costum apps and I am also about 25 mb Ram (only with Sk Tools Ram tuning).
So, our future cooking motto is: " We Love SuperBigRam-Builds "
This might help you guys out,
http://www.freewareppc.com/utilities/upx4ppc.shtml
"Absolutely essential program for PPCs with limited space (my 64MB model has only a 20MB ramdisk). I have been able to install twice as many programs thanks to UPX4PPC. Tips: (1) Make sure you untick "compress icons" (ticked by default). (2) Use maximum compression: it doesn't take long and occasionally makes a significant difference. (3) Compressing TCPMP: if you rename all the .plg files to .dll you can upx them (then rename them back!) I reduced the install from 1600KB to 923KB this way!"
Pumpiron579 said:
This might help you guys out,
http://www.freewareppc.com/utilities/upx4ppc.shtml
"Absolutely essential program for PPCs with limited space (my 64MB model has only a 20MB ramdisk). I have been able to install twice as many programs thanks to UPX4PPC. Tips: (1) Make sure you untick "compress icons" (ticked by default). (2) Use maximum compression: it doesn't take long and occasionally makes a significant difference. (3) Compressing TCPMP: if you rename all the .plg files to .dll you can upx them (then rename them back!) I reduced the install from 1600KB to 923KB this way!"
Click to expand...
Click to collapse
Keep in mind that if you do this, the DLL files etc cannot be loaded in shared memory - so your applications have to load their own instance of compressed DLLs. This can make things VERY RAM hungry on your devices...
I run Pays 6.1 rom and i get about 25 megs at start up with Activesync connected to my exchange server.
I notice some roms have a total program memory of 50 megs and some only 48 megs. Does this mean that the rom can be tweaked to get more than 50 megs of Program memory?
Pumpiron579 said:
This might help you guys out,
http://www.freewareppc.com/utilities/upx4ppc.shtml
"Absolutely essential program for PPCs with limited space (my 64MB model has only a 20MB ramdisk). I have been able to install twice as many programs thanks to UPX4PPC. Tips: (1) Make sure you untick "compress icons" (ticked by default). (2) Use maximum compression: it doesn't take long and occasionally makes a significant difference. (3) Compressing TCPMP: if you rename all the .plg files to .dll you can upx them (then rename them back!) I reduced the install from 1600KB to 923KB this way!"
Click to expand...
Click to collapse
Does this save Program RAM? Or Storage space?
pvs said:
For an in-depth discussion on this topic, you can start out with this thread. Don't be afraid to click on the links within for a very complete understanding of why Program Memory and Storage Space cannot be resized (unfortunately).
-pvs
Click to expand...
Click to collapse
Thanks. Informative, tho not the answers I was hoping to hear
Free Program Memory
I understand the preoccupation with maximizing Storage Memory. It is the only memory that apparently can be manipulated. But, the exercise seems rather academic to me with the advent of SDHC cards. It isn't storage memory that has ever been a problem for me, it is Program Memory. And Program Memory cannot be expanded (my understanding) so the only solution is to execute fewer or smaller programs if you want to maximize free Program Memory.
Unless we can get someone to develop a "virtual memory" feature that uses an allocated portion of SDHC memory as Program Memory, the only way we can maximize free program memory is by loading fewer applications, normally through a clean and lean ROM. If it could be accomplished, it would still pose speed issues in that the pipe to the SDHC card has to be far slower than the internal memory pipeline.
My 2 cents worth.
JamesAllen said:
I really don't understand at all the drive for larger and larger storage. So what if you have 58MB of "Big Storage" on the device. With SDHC cards growing ever larger at lower costs, the issue, it seems to me, is not device storage as much as Free Program Memory.
.
Click to expand...
Click to collapse
Don't understand it either. Do the base 6.1 roms come with that little ram built in? Maybe that's why there isnt an official version released yet. They cant get it to run more then 3 things at a time.
The only other answer is Get a kaiser
Kaiser is powered by an Samsung SC32442 400Mhz processor, 256MB ROM and 128MB RAM
friends,,, set file cache (pagepool) to auto mode, zero! when I used schaps wm6 4.31 my hermes had 32mb of free program (ram)..
sebastianmc said:
friends,,, set file cache (pagepool) to auto mode, zero! when I used schaps wm6 4.31 my hermes had 32mb of free program (ram)..
Click to expand...
Click to collapse
Yeah but slow as hell! Pagepool is made exactly to speed up the PDA by caching some data.
The problem is:
- 26-30Mb of RAM are far from enough for a web browser with flash content
- SD card bus is so slow on latency that can hardly be used as a virtual memory for active programs
- No pagepool or no cache is not an option
Perhaps someone could build ASAP an application that would transfer non-active drivers/apps or less demanding apps to a virtual RAM on the SD and keep the active ones (HTC Home, phone app, Web browsers/games) on the real RAM
One of the best apps for a mobile is OXIO stuff that will free RAM but perhaps the best option is an app that *in case of very low memory* would free non-used ram and would compress the demanding app data on RAM (usually I only run out of memory if I surf on the web with opera or netfront). Of course it would slow down a bit the PDA at that point but at least the app wouldn´t stop and would run until nothing could be really done.
Does anyone knows an app that does this on-the-fly? (auto-free and compress RAM)
mmick, I dont realize difference between with 4mb ppoll or without ppool.. I made benchs with and without ppool.. and to me, it doesnt make difference in performance... and sometimes I use msn, i.e, e mail, coreplayer. word... without pagepool or file cache, and my device is fast!! I dont believe pagepool.. lol
sorry for my english
regards
sebastianmc said:
mmick, I dont realize difference between with 4mb ppoll or without ppool.. I made benchs with and without ppool.. and to me, it doesnt make difference in performance... and sometimes I use msn, i.e, e mail, coreplayer. word... without pagepool or file cache, and my device is fast!! I dont believe pagepool.. lol
sorry for my english
regards
Click to expand...
Click to collapse
Curious ... did you ever test a ROM with a 6 or 8MB PP? That is where the difference is supposed to be notable.
I've toyed with these settings. These ROMs seemed faster at first, but I'm not so sure if there's a significant difference in the long run. As these were my own home-cooked ROMs I was experimenting with, I never kept them for any length of time.
I'd like to know your experiences with large PagePools, rather than the 4MB default.
Thanks!
-pvs
Pumpiron579 said:
The only other answer is Get a kaiser
Kaiser is powered by an Samsung SC32442 400Mhz processor, 256MB ROM and 128MB RAM
Click to expand...
Click to collapse
I tried the Kaiser and found it slower than the Hermes even though it had more memory. The thing was laggy. They need to put more powerful processors into these things.

TP2 running v slow - how do i free up memory?

My TP2 (winmo 6.5) is running painfully slow atm - it can take 10-20 seconds do do something like load my inbox or an email..
On a quest to speed it up I was looking at the memory in use:
Total: 187.41mb
In Use: 151.36mb
Free: 36.05
which is when the device is idle with no open apps.
36MB of free memory seems appallingly low to me.
Im sure on winmo 6.1 there was a slider you could adjust how much memory is allocated to storage and how much to programs. did I imagine this or how do i find it now?
I have 259.2MB of 'Storage' memory, of which only 30MB is used, hanging onto the rest is a big waste.
Or - is there a better way to speed things up? (like install android? )
You can look through a couple other posts stating very similar characteristics. Two popular programs are the SSK Dynamic resource proxy and NoPushInternet. Both can help reduce RAM usage significantly. Another program you should look into is CleanRAM, which will clear any stacks that might not have been closed when the program was ended. If you need help finding the CABs let me know and i'll post them up.
http://forum.xda-developers.com/showthread.php?t=676277
Well I dont know which 6.5 your running but I have switched ROMS myself, I was using the EU rom for the past couple of months, and anytime I got under 40MB free memory, the TP2 would run slow and odd, I recently switched over to the SEA rom, put the exact same programs on and as of right now I am running at 27MB of free ram with nothing running, and its just as fast when its fully loaded and I have almost 87MB of free ram. but its taken 4 days to drop to 27MB, odd.
burtonsnow8 said:
You can look through a couple other posts stating very similar characteristics. Two popular programs are the SSK Dynamic resource proxy and NoPushInternet. Both can help reduce RAM usage significantly. Another program you should look into is CleanRAM, which will clear any stacks that might not have been closed when the program was ended. If you need help finding the CABs let me know and i'll post them up.
http://forum.xda-developers.com/showthread.php?t=676277
Click to expand...
Click to collapse
Yeah, also by reducing the ShareMemSize (HKLM\SOFTWARE\HTC\ResProxy) to 0. So I read somehwere!
BioTecK said:
Yeah, also by reducing the ShareMemSize (HKLM\SOFTWARE\HTC\ResProxy) to 0. So I read somehwere!
Click to expand...
Click to collapse
Yes, I'm pretty sure that's what the "dynamic resource proxy" cab does. I don't have my TP2 with me at the moment or I'd test to confirm.
jamesb457 said:
..
Im sure on winmo 6.1 there was a slider you could adjust how much memory is allocated to storage and how much to programs. did I imagine this or how do i find it now?
..
Click to expand...
Click to collapse
I'm afraid you are showing your age, so far as I know that slider hasn't been used since before WM5. With WM5 they went to using NVRAM for storage (flash memory if you prefer). Prior to that all WM used RAM for storage - which meant they could not be turned off without clearing everything! But in those versions (I remember WM2003 in particular), you could allocate where the ram was used - storage or programs.
I often think that in some ways those older OS were faster. I remember my XDA mini working very fast. When MS switched to non volatile storage, I think they lost a bit of speed - flash is not as fast as RAM. Of course they gained the fact that you don't have to worry about turning off the power and losing your files!

Categories

Resources