Develop Bugs

New HTC Touch Keyboard

And the horses are off:
http://www.theunwired.net/?item=input-pocketcm-sip-keyboard-for-thumb-use-with-htc-touch

mmicha said:
And the horses are off:
http://www.theunwired.net/?item=input-pocketcm-sip-keyboard-for-thumb-use-with-htc-touch
Click to expand...
Click to collapse
you can go to:
http://www.pocketcm.com/dl.php
and Download PocketCM Keyboard
it is free
enjoy
edward

has this software been tested on the hermes with wm6??

yes it works perfectly. ive been using it since yesterday and its definitely much better than the pre-installed default keyboard. i especially like the way it auto-corrects my frequent typo's

tiptoekirk said:
has this software been tested on the hermes with wm6??
Click to expand...
Click to collapse
works very nice

What, the link is down?
Did it get xda'd? lol

Been using it for a few weeks.. Skinable and very easy to type with. In fact you can just slide your finger around and let go when you see the key you are looking for highlited..
Another thing you should look into is PocketCM...
http://www.pocketcm.com/
CONTACTS replacement!!! I like this even more then their keyboard solution.. Imagine the iPhone contacts slide you see everywhere, and you have pocketCM. One of the best features is the A-Z on the left side to quick jump.
Draven

How do you install this on hermes w/WM6? When I go into settings / input and change to PCM keyboard it says " Pocket CM keyboard has to be the current sip in order to configure it? what do I do?

Just click the little triangle beside your keyboard icon (bottom middle of bar) and select PCM Keyboard. That should do it...

i have been using the pocket CM k/b since yesterday and ts a quantum leap forward from any other k/b that is available. Its a must have for any Windows mobile user. It works on all PPC phones!

There is also a contact manager from the same author. You can use your fingers to scroll through and select contacts. I use that as well. It works great! It is called pocketCM. URL: http://www.pocketcm.com/index.php

I've installed it and it shows up in the list of available input devices but selecting it does nothing at all. The keyboard doesn't change visually onscreen and if I check the current input device it still shows the standard keyboard.
I can go into it's options and play around with things but if I change the Input Method to PCM Keyboard and click OK, it still doesn't switch over.
Running Schap's WM6 Pro 3.60a ROM.
Tried soft resets, tried installing to main memory and to storage.
Running 0.6 version.
Douginoz.

same problem here

What a bummer.
Too bad the Hermes doesn't have either a slide out keyboard, Block Recognizer, Letter Recognizer or Transcriber.

MHC48 said:
What a bummer.
Too bad the Hermes doesn't have either a slide out keyboard, Block Recognizer, Letter Recognizer or Transcriber.
Click to expand...
Click to collapse
I don't think sarcasm is called for; this looks like a neat keyboard that works better than the stock one for those times that you dont want to slide out or use the stylus.

douginoz said:
I've installed it and it shows up in the list of available input devices but selecting it does nothing at all. The keyboard doesn't change visually onscreen and if I check the current input device it still shows the standard keyboard.
I can go into it's options and play around with things but if I change the Input Method to PCM Keyboard and click OK, it still doesn't switch over.
Running Schap's WM6 Pro 3.60a ROM.
Tried soft resets, tried installing to main memory and to storage.
Running 0.6 version.
Douginoz.
Click to expand...
Click to collapse
Strange, I installed it on my 8525 (see sig for ROM info), and it worked fine. Of course my fat fingers don't let me use it all too well... But then again, I have the same problems with an iPhone and even the slide-out keyboard on the Hermes. I actually find the Letter Recognizer to work quite well for me, but it's a matter of personal preference (I was a big fan of Graffiti on the Palm, but Graffiti 2 was abysmal.)
-- Joe

keyboard on startup
Is there anyway to make this the default keyboard? When i reset my phone, it goes back to the standard keyboard

I'm in love with this keyboard! I had downloaded and installed the first version a couple weeks ago and liked it enough to use occaisonally. I felt like it had great potential and just needed a little polishing. But this new version, .6, is awesome! Perfect. I'm gonna use it all the time except when typing sms with the palm threaded app. I'll slide out the hardware keyboard on my hermes for that.
As soon as someone fixes the palm threaded app so that the SIP keyboard doesn't cover up the text you're inputting, I'll use this new PCMkeyboard there, too. And I'll send a hefty donation to that person that fixes the palm app.
donation on the way to this PCM guy, too.

Does anyone know if this keyboard supports other languages' input methods?

Under the options, there's a select box for "Keyboard layout" which includes:
Czech
English
Francais
German
Polish
Russian
Spanish

Hermes Keyboard Map

I flashed to the htc release wm 6.1 but accidentally did a foreign version. I flashed it again with the US release and it works fine except the symbols E, D, X, W, S, Z, Q, and A are not working correctly. They input a different symbol.
I went to do the keyboard fix...
"Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal)."
...and the value was already 132105 (20409 in decimal)
I went ahead and changed it to 132104 and then back to 132105 but it is still not working.
Is there such a program that would allow me to easily re-map the keyboard?
Any help is appreciated!

schaps advanced config 2

Thanks!
I ended up just finding this fix a little further down the page...
"Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?

scfreshy said:
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
Click to expand...
Click to collapse
FIXED sorry for clutter!

The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
No it doesn't fix the problem, any other place in the registry do you know....? Thank you!!

Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,

Greeee said:
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Click to expand...
Click to collapse
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.

kareem9nba said:
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
Click to expand...
Click to collapse
Hi there,
I'm actually new to Smartphones, and the Tytn / Hermes was going cheaply online (ebay unfortunately), but the phone itself is excellent and is easy to use from back in my windows days.
Most is familiar, but seeing how far Windows can go before I want to switch to Linux.
Where would I get the ACT? Is it downloadable from here as a development tool, or is it online needing payments etc?
Thank you,

greee, u can get it at schaps website here: http://forum.xda-developers.com/showthread.php?t=317070&highlight=advanced

galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,

Greeee said:
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Click to expand...
Click to collapse
Both should install on main memory.
Are you getting an error when the don't install?

So far kareem, i'm getting an XML output for the ACT, and for Pocket MSN it reports:
Setup Is Not a valid Pocket PC application.
With the ACT, i've no option to install, although the setup file I have was meant to be a cab file.
Thank you,

Scratch all that, got both PocketMSN and ACT installed today! For some reason the keyboard was in German, so switched that back!
Thanks guys!
Now got to find uber cool stuffs for my phone...

what's the value for an azerty keyboard

[DEV][QVGA][UPDATED 05/13/2009] EzInput 2.0

INTRO
I've started this thread to port the EzInput Keyboard to QVGA resolution. The keyboard is now fully functional yet still has a couple of small glitches to be fixed in portrait mode.
I am doing all the testing on my elfin, so I cannot assure that it will work on other devices so you'll have to test it yourselves!
You can download it here:
http://www.sendspace.com/file/uxi3be
THANKS
I must thank
DupinBJK:
http://forum.xda-developers.com/showthread.php?t=486227
nikoan89:
http://forum.xda-developers.com/showthread.php?t=489032
and
Conflipper
for their hard work on the VGA port, since I have mixed parts of their ports to get this QVGA version working.
KNOWN BUGS
XT9 is not currently working: the keyboard seems to get the coordinates (size and position) of the VGA keys. E.g.: if you press "q", "a" or "w" the keyboard will write "q" on the screen, since the three letters are in the area of the "q" key in a VGA screen (double size).
Any help on this matter would be really appreciated!!!
XT9 UPDATE 05/01/2009:
I´ve managed to get XT9 working by replacing the xT9ime.dll of the EzInput 2 with the EzInput 1.5 dll supplied with the ROM I am using. The problem now is that I cannot change XT9 mode back to normal mode .
Anyway I encourage you to test this and see if we can get a solution to the XT9 issues.
To test it, just go to the windows directory, rename eT9ime.dll to something else (e.g. eT9ime.dll.OLD) and reset your device (this should restore the dll supplied with your ROM).
I´m waiting for your comments!!!!
VIBRATION/XT9 UPDATE 05/13/2009:
I managed to get vibration to work a couple of weeks ago, but I wanted to fix the T9 mode before releasing a new version.
I´ve been working on T9 and have not been able to find where the code responsible for calculating the key pressed (based on the coordinates) is.
OPTION A: If anyone is able to find such place in the code or just point me in the right direction, I´ll find the time to patch et9Ime.dll so that QVGA users can enjoy T9 in this keyboard.
OPTION B: Another possible option would be to patch the et9Ime.dll from ezinput 1.5, but the mappings of some important keys seem to be different (XT9/ABC switch for example), and also different registry keys need to be updated so that everything works as it should.
Sorry for the lack of feedback, but I need more time for fixing these issues since this is the first time I am dealing with SIP/IME/IMM and stuff and I´ve found it a little bit more complex than I thought it would be.
HOWTO
Additionally, I'm planning on writing a very simple "howto" to explain people what they can do to adjust/fix/change the layout of the keyboard.
PS: I cannot post any screenshot now, so if anyone of you can upload one I'd be grateful.

problem on XT9 mode, maybe is the key mapping, i dunno that
for example type q,w,a,s the result is --> qqqq
type e,r,d ---> www
thanks for your hard working

T9 issue
You're right (i did not test the XT9 )
I'll have a look at it.
Thanks

Nice
Just 2 questions :
- vibrate when keys are pressed : Don t work normal maybe ...
- Is there a way to change language to french? i see 40C file ...
ty

looks great, good to finally have EZInput for QVGA.
major bug I noticed it messes up the keyboard mapping..for example Caps does not function, nor does the light, just flickers on then off when caps is hit, I believe to turn caps on and off (at least for me) I would have to use function, which also works for function (if that makes sense) lol
also the function keys got incorrectly mapped, I will try the tilt keyboard fix, hopefully that will work, and you can post that Cab.
Minor Issue: no SIP image to open the keyboard on the phone. its a black square, hit the square to active SIP. Would be nice to get a cool new icon though ;P
other then that, I will continue to test this, because the spacing between the keys and the skin is very nice
Thanks for your hard work and the post

I installed this new version and the only major thing I see compared to all the rest of the one you have posted is that the SIP Icon for the Keyboard that shows between the softkeys is missing, if you press the empty space the Keyboard still pops up and is functional but the icon is gone.

thanks man. Work great

So I don't have the phone keypad...is this just a problem with me or does anyone else have this problem?

XT9 is off, but that's fine cause I don't find a need for xt9 on a full keyboard anyways. Though like I said in the other thread I wish there was compact qwerty, or at least I could have the compact qwerty from my other keyboard as well.

Thanks a lot! Im at school now, but as soon as I get home, I'll install this on my phone.
- Thanks, your job is really appreciated.

Great !!!
I've been waiting for this for sometime now and just say thanks for the Qvga version Just wondering if anyone is working on the xt9 bug, i have gotten accustom to using that but if not no worries still a great keyboard !!!

Well, this full qwerty is a huge improvement over the EZ-Input one. I installed the keyboard and used the full qwerty without any problems. HOWEVER, does the Compact QWERTY mode not work with this? Thanks.

Thank you man, you are awesome !
I don't have any problems with it, except the reported bug of the SIP Icon.
But the keyboard on my Elf is a bit slow without O/C. (WM 6.5)
I love this keyboard !

XT9 bug
I've been looking at the XML files, the kdb files and the ldb files and I still cannot figure out the place where the XT9 keys size/position (x,y,h,w) is defined.
Does anyone know whether it's hardcoded in a PE module or it can be configured anywhere?
BTW, I'm afraid Compact QWERTY is not possible for the time being...

Sorry if I'm repeating. If I switch to numeric and press a key and then go back to ABC then all the keys are screwed up and when I press them I get the wrong keys. Do others have the same problem?

littld, i'm not experiencing that behaviour, sorry

asak0 said:
I've been looking at the XML files, the kdb files and the ldb files and I still cannot figure out the place where the XT9 keys size/position (x,y,h,w) is defined.
Does anyone know whether it's hardcoded in a PE module or it can be configured anywhere?
BTW, I'm afraid Compact QWERTY is not possible for the time being...
Click to expand...
Click to collapse
I have been trying to find this out too, I have looked everywhere and can't find the positions for XT9.
Side note, on all 3 previous versions you could use XT9 in ABC and it worked perfectly, but in the new version it just types normally in ABC and XT9 is still broke.

ems275 said:
I have been trying to find this out too, I have looked everywhere and can't find the positions for XT9.
Side note, on all 3 previous versions you could use XT9 in ABC and it worked perfectly, but in the new version it just types normally in ABC and XT9 is still broke.
Click to expand...
Click to collapse
You mean in the previous versions I posted in the QVGA Rhodium Development thread?

asak0 said:
You mean in the previous versions I posted in the QVGA Rhodium Development thread?
Click to expand...
Click to collapse
Yes, all 3 you posted in that thread. If set to XT9 all key mapping was off as I had posted in that thread and others. But ABC worked as XT9 without a problem. It was weird. But I am running the last posted version which I downloaded from sendspace and it works as described above. When I installed the one when you opened this thread also from sendspace XT9 key mapping is still the same, totally off and ABC just functions as it should, regular typing with no text prediction.
Hope that makes sense?

ems275 said:
Yes, all 3 you posted in that thread. If set to XT9 all key mapping was off as I had posted in that thread and others. But ABC worked as XT9 without a problem. It was weird. But I am running the last posted version which I downloaded from sendspace and it works as described above. When I installed the one when you opened this thread also from sendspace XT9 key mapping is still the same, totally off and ABC just functions as it should, regular typing with no text prediction.
Hope that makes sense?
Click to expand...
Click to collapse
Not really...
Anyway I'll play around a bit with the different modules to see what I can get.

Input method auto change (choose keybord using stylus)

Hi,
I would like to share with You my little app, that I wrote to make using HTC easier and more comfortable. With this app You can assign finger friendly keybord when stylu is In, and small keyboard for stylus when it is out. Unfortunately it works only on devices with stylus sensor like HD, Diamond, Touch Pro, SE X1 (I hope it works, I've tested with BlackStone only). If you have some suggestions, ideas or if You run this app on other devices please let me know.
You can download it from here (Sorry for my English and google translated page).
I've updated apllication to version 1.1.2
New features:
- support landscape mode
- up to four screen keyboard support
I hope it'll be usefull.

nice app...i'm sure it will help me, as it seams that my touch hd keep changing input keybord completely randomly and with no logic whatsoever so will give a try...hope it will bring an law and order to that mess
dobra robota kolego

Uh... I don't think X1 has a stylus sensor...

ipporek said:
Uh... I don't think X1 has a stylus sensor...
Click to expand...
Click to collapse
So it will not work on SE Sorry.

I've updated apllication. More info at the first post.

hi
hi any screenshots available? does it work like sipchange ? able to auto choose which keypad u want after startup ?

I've attached some screens. During system start, application is checking screen oreintation and stylus state and then deciding which keyboard should be used.

Hi, this sounds very interesting. Unfortunatly the link doesn´t work.
Could you just post it here?
Thx, nearly

Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl

nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Still doesn't work

nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Nope, can't download. Would love to try this out, it's a good idea.
Can you supply another download location?
Thanks for your efforts.

Use the link in first posting, deactivate Google translation:
http://lemon.byethost15.com/download/imac
pobierz = download.
Cab attached - will delete attachment, if nitro_67 wants to.

File uploaded.

nitro__67 said:
Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl
Click to expand...
Click to collapse
Thanks man. It works fine in blackstone.

Link doens't work for me too...
I tried the Cab file above, it really works, meaning it will change the Imput method according to stilus in or out.
But if I closed the phone or make a soft reset, the first time I want to write a message the imput method is still the standard one

You must setup program to start service with Windows.

Do you mean select the option "Run at Start up" ?
Yes I did select it but as I mentionned, after a reset or turning the mobile off, the first message I will write will open with the standard keyboard... I then move stilus in and out and it starts to work correctly until the next reset or turn off

So strange, because program is started. Maybe You are using keyboard which is loaded leter. Uncheck 'run at start' and add shortcut to autostart. After this program should start after all proceses and services.

Good idea, I will have a try...

nitro__67 said:
If you have some suggestions, ideas
Click to expand...
Click to collapse
Hi Nitro, is it possible to launch an application when you take out the stylus? I would love to have Phatpad opened when I do so, to take a quick note.
I won't mind closing it the one time I pull out the stylus in another app.
Hope you can help.

ATT Tilt2 Full Hardware Keyboard Remap *BOUNTY*

I have tried all three cabs below with zero success! Yes, these cabs remap if that the letters on the hardware keyboard but do nothing for the top row and symbols in blue. I can live without remapping the OK key if thats such a feat but need all other keys at least to be mapped the way they are suppose to be, they way they look on the hardware keyboard. Im sure many other users here will agree with me on this and hopefully others will pitch in as well.
Just looking for a simple cab to install so when i flash a custom rom that i can have FULL use of my hardware keyboard on my att tilt2, no more and no less. I have no knowledge in this stuff or id do it myself rather then provide stickies of a cab that does only half the job!
Since half the keyboard is already remapped, i will start the donation/bounty at $10USD and will add more if this can be done quick. If there's multiple people in on creating this for the community then i will be sure everyone truly involved gets a fair share as well.
Im no techy, just an end user but don't see this task to be complete rocket science.

What the hell !!! The symbols in blue???? Those are controled with the funtion key (FN) on the keyboard.

carhigh said:
What the hell !!! The symbols in blue???? Those are controled with the funtion key (FN) on the keyboard.
Click to expand...
Click to collapse
Yes of course they are. Im saying not only to remap the keys in white but also the ones controlled by the FN key, the symbols in blue. I dont believe my description is hard to understand. Simply look at an att tilt2 hardware keyboard, now have it work as it should, thats it! Not asking for anything else, just for all the keys on the hardware keyboard to work as they do when you first turn it on using the stock rom. Need a cab so it will work on custom roms since were not here to run stock roms.
Dont really know how else i can spell it out? Maybe take a picture of the att tilt2 hardware keyboard and post it?

I use the first one you list and all of my Keys work fine on my AT&T Tilt 2.

u921333 said:
I use the first one you list and all of my Keys work fine on my AT&T Tilt 2.
Click to expand...
Click to collapse
Are you saying the top row works fine and every blue symbol key in conjuction with the FN key works fine as well? What rom are you running? Makes no sense to me. Making me think i have one bunk device since ive tested this with a fresh flash without installing anything else.

deeznuts said:
Yes of course they are. Im saying not only to remap the keys in white but also the ones controlled by the FN key, the symbols in blue. I dont believe my description is hard to understand. Simply look at an att tilt2 hardware keyboard, now have it work as it should, thats it! Not asking for anything else, just for all the keys on the hardware keyboard to work as they do when you first turn it on using the stock rom. Need a cab so it will work on custom roms since were not here to run stock roms.
Dont really know how else i can spell it out? Maybe take a picture of the att tilt2 hardware keyboard and post it?
Click to expand...
Click to collapse
I put that second script, install the cab (MortScript) then run the script file. soft reset and your good.
Some applications are weird and they swap the keys back to the original TP2 settings, but its very rare. It seems to work fine for me other than that. OH and when trying to use the hardware keys when dialing for a phone call its not right.. But I don't really use that anyways.

DuMnUt101 said:
I put that second script, install the cab (MortScript) then run the script file. soft reset and your good.
Some applications are weird and they swap the keys back to the original TP2 settings, but its very rare. It seems to work fine for me other than that. OH and when trying to use the hardware keys when dialing for a phone call its not right.. But I don't really use that anyways.
Click to expand...
Click to collapse
What rom are u using including build? I used the mort pacakge just as u described after a fresh flash of nrgs latest rom of build 23518 on wm6.5.3 standard sense 2.1 and nothing bro! Only keys that work right for me are the letter keys, comma, period, and question mark. Well FN, shift are also mapped correctly as well. Every key on the top row is numbers 1-0 and the blue symbol keys are all over the place! This is killing me!

No, you dont need to explain. I understood your post and as you can see, i am on a custom rom with the tilt 2 and all my buttons work perfect, except for the OK key. I also use the first cab in your OP. As for dialing, as pointed out by a respose here, have no clue if mine works that way. I use the onscreen dialer.
Something must be wrong with your phone!!!!

Im using NRGZ's Leo Rom the 21885 version from 12/31.... It could be an issue with the 23518 builds. The OK button has never worked but dont really need it. I would try it on a 21885 build and if it doesnt work it sounds like device specific. You also could flash a Stock Rom back on then back to a Custom one sometimes some of the previous system files arent removed correctly I have heard.

I have an att tilt 2 as well, and after flashing any rom other then att my keyboard is all wrong also, mainly the top row, and the Fn keys. Its pretty funny though without a remap, my shift key works as the FN key, and my OK key works as a shift key, which I find funny. But attached is the cab I always have used every time, and every key with the exception of the OK key works, I have tested this 1,000,000 times. If this cab doesnt work (Which I think could be the third cab in your list but not sure), then you have a bad keyboard.
I have used this cab with, the stock EU rom, nrgz roms, valkyrie's roms, Arks roms.

I have remapped my keyboard layout easily by editing the keyboard txt-file....was no big problem....every row is listed in his file, and you can put in whatever letter/symbol you want....

little hijack
Sorry for hijacking the thread a little. I've got a dilemma here, I'm about to change my physical keyboard (in fact the whole casing) for the one that has tilt2 layout (or maybe just the casing leaving the old keyboard untouched). How do you Tilt2 guys manage without the "Ctrl" key?!!!

pjm77 said:
Sorry for hijacking the thread a little. I've got a dilemma here, I'm about to change my physical keyboard (in fact the whole casing) for the one that has tilt2 layout (or maybe just the casing leaving the old keyboard untouched). How do you Tilt2 guys manage without the "Ctrl" key?!!!
Click to expand...
Click to collapse
Most people will think you are crazy, most tilt2 people want the standard tp2 keyboard. but to your question: since the ok button doesnt work, I mapped "OK" using keyboard config to be a CTRL button

blowy666 said:
I have remapped my keyboard layout easily by editing the keyboard txt-file....was no big problem....every row is listed in his file, and you can put in whatever letter/symbol you want....
Click to expand...
Click to collapse
Is it the ATT keypad.dll? and you just open it with a text editor like notepad or something? I have been searching and it seems like that is what I should be looking for but I just want to make sure. Thanks in advance.

Sorry Deeznuts, but either you aren't explaining it right (which I think you are) or (more likely) there is something wrong. I have a Tilt 2\ATT and the keyboard fix cabs do work in every ROM I have installed. (With the exeption of only about three blue keys like the shortcut to mail or the internet.) There is either something wrong with your device or the ROM that you are using. I suggest you start over with a different ROM to test your keyboard, maybe use a stock ROM to be sure. There is also a prog called Rhodium Keyboard Control (RhodiumKbdControl_GSM.cab) that might be of use. Good luck.

I've been using the Tilt2HWKeyboard.cab and all the symbols and numbers work fine.
OK button does not work, sometimes it launches opera, other times i get error message with something about start.exe
FN+Left arrow (supposed to be calendar) Launches opera
FN+Down arrow (supposed to launch internet browser) does nothing
FN+Right arrow (supposed to turn on wifi) opens up comm manager.
I don't mind that those are off, but would prefer the OK button to work and also PTT button does not work at all.
I'm down to put in $10 as well to get a cab that has the full use of the HW keyboard + PTT button

blowy666 said:
I have remapped my keyboard layout easily by editing the keyboard txt-file....was no big problem....every row is listed in his file, and you can put in whatever letter/symbol you want....
Click to expand...
Click to collapse
I was looking at that text files, and it appears to be mapped correctly, but the top row is still messed up for me and the blue function keys are not correct either.
Can you post how you modified the text file please?

Mine works fine. I used instructions from a certain thread. I first installed the Tilt2HWKeyboard cab. I then installed a cab called SdkCerts. Then I installed a cab called RhodiumKbdControl_GSM.

$20 for 1 single step install at&t tilt2 keyboard ALL BUTTONS MUST WORK INCLUDING PTT AND OK BUTTON I DONT CARE IF IS A MORT SCRIPT A CAB OR XML

Hes NOT CRAZY lol
I have the same exact issue. ive tried different cabs to no change except . ? , still sont know where the hell at symbol is... I GOT 10 usd for a working cab or a soloution where every key works as should...besides a stock re flash!
What apps are you running bro? Im running the apr8 nrg rom too. idk! dont make sense to me. but even when i ran stock rom keys would switch to this configuratio noccasionally in txt msging!
i would close all the way out of txt and open it back up and keys back to normal. Im seriously about burned out on hunting fixes for these damned phones, stock and otherwise. Ive owned every HTC w a slide keyboard that att offered since 8125 (wizard)
and played hunt and fix on every single one. seriously, what other product would u pay 400 plus dollars for and then spennd countless hours searching for fixes just to make it work properly