Related
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
check you PM
It's already pretty much in the Wiki, maybe a 'downgrade' link would be prudent.
Upgrading and cooking: -> MrVanx Hermes upgrade guides -> SPL Downgrade Guide
IPL-1.00 / SPL-1.06? Is this working
Hi,
I just read through the mr vanx downgrade guide and found out that there is a downgrade package with IPL-1.00 and IPL-1.04 and a second one with IPL-1.01 and IPL-1.06.
Now, I have the problem that my device was shipped with IPL-1.00 and SPL-1.06? Apparently this is a strange combination as this is not downloadable at the mr vanx downgrade guide, so my question is. Can I simply extract the IPL-1.00 from one .nbh and SPL-1.06 from the other and recombine them using rombaker, or would a downgrade to this combination screw up my device?
Thanks for letting me know.
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
fone_fanatic said:
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
Click to expand...
Click to collapse
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Do as ToddJG says, download the two files which i refer to in the guide.
Extract the IPLs and SPLs from the two files, mix and match.....BUT BE CAREFULL.......DONT FLASH UNLESS YOUR PREPARED TO DO IT.
ipl 1.00 and spl 1.06 will be fine.
make a single nbh from the mix and match combination then flash with customRUU.
What if i'm trying to flash the original shipped rom.. and i do the first step in your guide, then simply flash the shipped rom, or do i still have to extract the ipl and spl? (they're already extracted just wanting to know if its redundant if i recompile it with the rom i extracted them from.)
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
As with other downgrade guides this is NOT intended as a guide for claiming the warranty of the device having flashed components which are not authorised by the manufacturer or carrier.
Click to expand...
Click to collapse
?
fone_fanatic said:
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
Click to expand...
Click to collapse
It means that if you flashed unauthroized phone parts (like unofficial WM6 roms, radio upgrades and so on you have void your warranty). Of course if you can downgrade to your old rom nobody will notice that you did that.
But you have to be very careful on downgrading if you have also upgraded your radio I thinkk, cause you can brick your device (means having "NOGSM" after downgrading), see this note from mr. vanx downgrade guide for wm5:
NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.
Click to expand...
Click to collapse
Maybe you should follow mr. vanx downgrade guide for wm5 to make sure your on the safe side.
I thought he meant that it is still noticeable if you downgrade the IPL and SPL that it would be detected during warranty repairs but thats not the case...
I emailed I-Mate and they gave me an RMA# and had me purchase the $60.00 Diagnostic package from PocketPcTechs.com(They handle imate warranties in the US). So i did that, they emailed me with a form i should fill out and include it with my device when i ship it...
Did that, they sent me an email when they recieved my device, 15min after that i recieved another email that they were working on my devic, then Early the next day i get an email saying repairs are complete and its being ready to get shipped back to me... 15min an email with a tracking number saying its shipped....
Everything worked so smoothly, warranty was accepted, hopefully everything will be good when i get the device back (which should be today) I want to get rid of this ****ty iphone so bad!
todd_jg said:
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Click to expand...
Click to collapse
MrVanx instruction working just fine, however do not put your Hermes into Bootloader Mode. I've been trying the steps with my hermes in BootLoader Mode for many many times and it does not work. Leave it on OS mode. (Today) screen before you run the CustomRUU. Hope this help
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
GldRush98 said:
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
Click to expand...
Click to collapse
Yup cingular/ att will charge you for out of warranty work if its a different rom
Please help
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
thedude0420 said:
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
Click to expand...
Click to collapse
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
todd_jg said:
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
Click to expand...
Click to collapse
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
thedude0420 said:
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
Click to expand...
Click to collapse
No problem. I thought you already had the rom you wanted, but just needed to change the spl. Guess I gave the overly complex solution!
marcelser said:
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
Click to expand...
Click to collapse
Hey, maybe i come to late,
I had the same "problem", I had the Screen Aligment Issue. And I really wonderd myself if o2 have problem with my "Schaps ROM Version HardSPL" BUT there was no problem, they solved my Screen Aligment Issue. Afterwards I asked, what actually is bad for warrenty. Upgrading the Bootloader is no problem. But CID (Costumer ID) unlocking will may be evil. Anyway's for myself (the SA-Issue) was a hardware issue which has nothing todo with software facts like upgrading the bootloader...
dont be worried... i guess there will be no prob...
My touch-screen died on me (it's a hardware problem) and I am in the process of downgrading my WM6 (Schap's) Vario 2 to it's original (WM5) state.
I need to downgrade two components: (1) the splashscreen (I upgraded to an HTC boot screen); and (2) the OS. I believe that I cannot downgrade the radio (currently 1.50).
Someone kindly posted a T-Mobile splashscreen and I have applied this nbh file and it works - although the HTC screen still appears (after the T-Mobile screen). Is there any way of getting rid of this?
I followed the instructions for downgrading the OS that are posted here. I downloaded the WM5 OS as per the link on that page. But it's an EXE file not a RAR file so I can't follow Mr Vanx's instructions. Where do I get a T-Mobile WM5 ROM in RAR format? I tried running this EXE file (hoping it would save me following Mr Vanx's complex procedure) but it didn't work.
Finally, is this worth my while? If I can't downgrade the radio (to 1.04 as supplied) won't the T-Mobile engineer spot my tinkering anyway? If s/he does, how likely is it that they will refuse to fix the screen? And, if they do, how expensive is it to repair a touch screen (the screen is perfect and responds to hardware buttons but the touch aspect does not work)?
Thanks in anticipation.
I think you should be able to just execute SSPL on your device and then run the official T-Mobile RUU EXE. Be very careful, though, because the T-Mobile RUU would get rid of HardSPL, so if something goes wrong, you'll brick it. Someone correct me if I'm wrong here...
bobbyelliott said:
My touch-screen died on me (it's a hardware problem) and I am in the process of downgrading my WM6 (Schap's) Vario 2 to it's original (WM5) state.
I need to downgrade two components: (1) the splashscreen (I upgraded to an HTC boot screen); and (2) the OS. I believe that I cannot downgrade the radio (currently 1.50).
Someone kindly posted a T-Mobile splashscreen and I have applied this nbh file and it works - although the HTC screen still appears (after the T-Mobile screen). Is there any way of getting rid of this?
I followed the instructions for downgrading the OS that are posted here. I downloaded the WM5 OS as per the link on that page. But it's an EXE file not a RAR file so I can't follow Mr Vanx's instructions. Where do I get a T-Mobile WM5 ROM in RAR format? I tried running this EXE file (hoping it would save me following Mr Vanx's complex procedure) but it didn't work.
Finally, is this worth my while? If I can't downgrade the radio (to 1.04 as supplied) won't the T-Mobile engineer spot my tinkering anyway? If s/he does, how likely is it that they will refuse to fix the screen? And, if they do, how expensive is it to repair a touch screen (the screen is perfect and responds to hardware buttons but the touch aspect does not work)?
Thanks in anticipation.
Click to expand...
Click to collapse
You should be able to use winrar to extract the exe file into two - the nbh and the RUU.exe. Try that, then use the nbh with the custom_ruu (as indicated by MrVanx. The nbh inside the TMobile exe file will have the splashes, the os and probably the radio too. After that, follw the HardSPL downgrade instructions from MrVanx.
Regarding Transcoder's suggestion, the latest HardSPL will not allow overwrite with SSPL for most - certainly not for that TMobile ROM. MrVanx's guide will walk you through that as well.
Ah, I remember now. SSPL is 1.09, and that in itself won't allow downgrading to anything below that version... it's been a while.
What about the radio and boot screen?
Thanks for the suggestions to put WM5 back onto my Vario II. I plan to give it a go this weekend (been on business since my original post).
But even if I put WM5 back on it, I will be left with HTC popping up on my boot screen (right after the T-Mobile screen appears) and my radio is 1.50. So, I guess, the T-Mobile technician will spot my messing around with the phone.
Any suggestions about how to completely get rid of the HTC boot screen and downgrade the radio to the original (1.04 I think)?
Cheers.
bobbyelliott said:
Thanks for the suggestions to put WM5 back onto my Vario II. I plan to give it a go this weekend (been on business since my original post).
But even if I put WM5 back on it, I will be left with HTC popping up on my boot screen (right after the T-Mobile screen appears) and my radio is 1.50. So, I guess, the T-Mobile technician will spot my messing around with the phone.
Any suggestions about how to completely get rid of the HTC boot screen and downgrade the radio to the original (1.04 I think)?
Cheers.
Click to expand...
Click to collapse
The original shipped ROMs in the wiki contain the startup and splash images that shipped with the original ROMs. Unless that splash screen is in the original, it will be overwritten.
Screen
You could try fleabay. I have seen the digitizer and the full screen there pretty cheap. $10.00 for the digitizer and $50.00 for the screen with digitizer.
Do a search for 8525 screen or 8525 lcd
Downgrade!
bobbyelliott said:
My touch-screen died on me (it's a hardware problem) and I am in the process of downgrading my WM6 (Schap's) Vario 2 to it's original (WM5) state.
I need to downgrade two components: (1) the splashscreen (I upgraded to an HTC boot screen); and (2) the OS. I believe that I cannot downgrade the radio (currently 1.50).
I followed the instructions for downgrading the OS that are posted here. I downloaded the WM5 OS as per the link on that page. But it's an EXE file not a RAR file so I can't follow Mr Vanx's instructions. Where do I get a T-Mobile WM5 ROM in RAR format? I tried running this EXE file (hoping it would save me following Mr Vanx's complex procedure) but it didn't work.
Thanks in anticipation.
Click to expand...
Click to collapse
Just did this same thing yesterday. Followed Mr.Varnx instructions
here
Take back to 'retail' SPL.
Hope this helps.
Thanks very much guys for the advice.
I'm away again this evening but will give both the WM5 ROM and radio downgrade a go when I get back (Tuesday).
I really appreciate it - although I am pissed off that I have to do this at all since a f*cked touch screen has nothing to do with me upgrading - but I know that T-Mobile would use it as an excuse to refuse to service my phone.
Thanks again. Much appreciated. This forum rules!
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
I suggest your search the forum...
hello newbie
yes use the search button...it works really well
You first need to flash your diamond with one of the hard spl on this site and after you've done that you can take your pick from any of the roms on here
sorry guys i did look just didnt understand much. I am trying to use Hard SPL just cant get it to work.
same here
I have an orange htc Diamond and would really apreciate which files wouldwork. Everything I have tried stay's at Zero and ends up in an error.
Any help would be greatly ppreciated
root directory
to use hard spl i have to put a file in the root directory! but what is the root directory?
Hi James, your failing at 0% most likely because the SPL your using will not allow unsigned ROM's. Look for another SPL, one with developer edition in the title is good and works quite well for me.
I have an Orange also, the first thing to do is install the SPL then flash the radio (.05 is good) then get a new ROM!
Hope this helps
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
james soules said:
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
Click to expand...
Click to collapse
You need to do the following
1. Download the Unsigned HardSPL 1.24 from here http://forum.xda-developers.com/showthread.php?t=408621 and extract to a folder on your PC. Make sure you have Active sync installed and setup with your Diamond. Run the Updater in the 1.24 folder. Once the Phone reboots reconnect with active sync.
2. Download any of the ROMS on here and run the ROM to flash the phone.
Thats it !!!!!
Topboy
as i go to add a ROM i get a error saying the application failed to initialize properly ( 0xc0000135) click OK to terminate
Or check www.modmydiamond.info for easy to understand information
i get the above error as i try to add RUU
Hard SPL won't work
Hello,
From what I've read on the forum and also on www.modmydiamond.info, I gather I need to go through the Hard SPL step before installing any ROM.
However, after trying 2 different SPLs (hard_spl.120 and diamond_hspl_1.24) it still doesn't work.
I'm stuck at 0%.
Thanks
Read here....
As an alternative to the other threads try this one:
http://forum.xda-developers.com/showthread.php?t=416211
Its about the most comprehensive writeup I've seen to quickly and easily get your Diamond set from HardSPL to Radios to ROM's
Also read the WiKi's section at the top of the forum......
Query on Orange htc Upgrade ROM.
Hi There,
I have recently purchased a htc diamond, it was originally an Orange unit but is unblocked.The ROM version is 1.37 but I wish to flash to 1.93.I have the Orange released version of the 1.93 as htc wont support me direct.Question is, if I do this will the unit revert back to being Orange??ie.....does this flash the radio back?? or will it remained unblocked??
Thanks in advance...
james soules said:
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
Click to expand...
Click to collapse
thxthxthxthx
Hi,
My Diamond has no response on the screen, so I think I need to return to factory for repairing. However I have difficulties in falling back to stock ROM and SPL.
From the Wiki:
---------------
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
...
-----------------
I can't flash my ROM to latest HK WWE CSL ROM (2.03) as it just stopped at 0%. I'm using SPL-1.30.OliNex.
Questions:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
1) Should I flash to v1.93 (the very beginning of the ROM)?
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
3) Anyone can give me a reference on the step-by-step in details...
Thanks!
Please help...
F810
Questions:
f810 said:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
Click to expand...
Click to collapse
If the latest was the offical from the site then you could use that - as you are having issues flashing this with 1.30 HSPL, I would suggest updating that to 1.40
f810 said:
1) Should I flash to v1.93 (the very beginning of the ROM)?
Click to expand...
Click to collapse
This might be a easier option and should work woth the 1.30 HSPL
f810 said:
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
Click to expand...
Click to collapse
This is recommended
f810 said:
3) Anyone can give me a reference on the step-by-step in details...
Click to expand...
Click to collapse
Its really straight forward like the WiKi suggests
This Thread may help
Thanks a lot.
Re Q3, so do you mean if I extracted the stock NBH, it's only OS but not including RADIO? If so, I will get the RADIO from wiki page later. Would you please clarify for me?
After your information, I think the steps in Wiki are clear. Thanks.
If this is HK ROM is the one you have downloaded from HTC PAGE then it has a radio included
Since my Diamond is totally malfunction in the touch screen, I can't response to all the confirmation & prompts...
I've failed to install Stock ROM and tried your recommendation on upgrading to HSPL 1.40. There was a confirmation on running the program in my Diamond and I can't press YES and now my diamond is just like bricked.
I've also tried pressing VOL DOWN + Reset to connect the Diamond via USB. The ROM Update Utility has "successfully" update the HSPL, but actually when I hard reset it and found it's still running 1.30... Can I just use this approach to fallback to Factory status??
Anyone has good idea on how to fallback to Factory Stock ROM, RADIO and SPL, provided that my screen has totally no response to me?
PLEASE...PLEASE...PLEASE help.
You will not be able to update olipros Hard SPL in bootloader mode as the SPL is protected and the 1.30 will prevent this although show its been done.
What you will need to do then is just load a 1.93 ROM from boot loader. the were some in that link i posted earlier. as to reverting to the default SPL - you may be luck not to need the screen for any confirmation. but running a new SPL to overwrite Oli's you will need to use windows and the RRU
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
band27 said:
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
Click to expand...
Click to collapse
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Here you go....I did a search
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Read this............Scroll to Post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4
band27 said:
Here you go....I did a search
Click to expand...
Click to collapse
I also got that but it's not win32 program... I believe it's running on the Diamond. But I've hard reset, and never able to setup as it's screen was not functioning now...
kawatsu said:
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Click to expand...
Click to collapse
That ROM had a different boot image - so you need to replace that by flashing another splash .NBH file using RUU.
Original splash can be found HERE
and if needed CUSTOM RUU HERE
Just un-zip these and put the splash file in the same folder as the Custom RUU and run the RUU - the flash should take a few seconds and viola - bye bye Diamond project splash.
f810 said:
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Click to expand...
Click to collapse
I think as long as the SPL is changed and the ROM is of the original language the I think it should be OK to send back like that
f810 said:
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Click to expand...
Click to collapse
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Which is the original SPL?? 1.23, 1.34 or 1.37? I do recall taking a picture of the original SPL when i 1st got the Diamond for days like that but i just can't find it now
I'm bought it from Malaysia. Anybody can help me confirm this??
R3PUBL1K said:
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Click to expand...
Click to collapse
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
f810 said:
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
Click to expand...
Click to collapse
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
f810 said:
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
Click to expand...
Click to collapse
Can anyone help??
Due to a hardware problem in my Diamond I needed to restore it to manufacturer default. I didn't find a guide to this and since I've done the research anyway I thought I'd put together this little tutorial as the information was somewhat scattered around the forum. I hope this guide will be of use for the community.
My phone was originally branded and sim-locked by 3. After I was through with it, it was SIM-unlocked, security unlocked and had HSPL, custom ROM and a radio ported from another device. The steps below is what I did to restore it to stock. All steps might not be neccessary for you. This procedure might also work for other devices than the Diamond, but of course you need other versions of SPL, ROM etc.
1. Backup everything on your phone to your computer - use activesync, PIMbackup etc and make a copy of your Internal Storage.
2. Make a hard reset (hold vol down + enter and soft reset) and chose to format moviNAND. This step is only neccessary if you want to wipe your Internal Storage before you send the device in for repair, but I recommend it.
3. Go to www.htc.com and download the latest stock ROM (includes stock radio and SPL). You find it under Support and you enter your s/n to get the correct stock ROM for your device, complete with branding for your operator. You can also find stock ROMS here: http://forum.xda-developers.com/showthread.php?t=471699
4. Flash the stock ROM. Now you have stock ROM and Radio on your device. Stock SPL will not be installed until you've replaced HSPL with an older stock SPL and flashed ROM again.
5. Get RUU-SSPL and stock SPL from HERE:
http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. I used the stock 1.93 SPL. Some instructions and info about restoring stock SPL is in the linked post by cmonex and due credit goes to her. I will repeat some of that info to keep this guide step-by-step. EDIT: Stock SPL 2.03 can be found here: http://forum.xda-developers.com/showpost.php?p=3359191&postcount=390
6. Put the .nbh file from the SPL you downloaded into the same folder as the extracted contents of RUU-SSPL-withoutNBH.zip and run the RUU. This flashes an old stock SPL.
7. Flash your stock ROM from step 3 again. This step is neccessary to get the correct stock SPL on your device, eg. the one that corresponds with the stock ROM you've downloaded in step 3. It was not installed in step 4, because then you still had HSPL. In step 6 you've installed a stock SPL and now the correct stock SPL will flash along with the stock ROM. After this step I got SPL 2.03 on my Diamond.
8. Remove the Security Unlock from your device using the instructions and Security Relocker by Olinex from this post by cmonex: http://forum.xda-developers.com/showpost.php?p=3299516&postcount=492
Now, my Diamond is still SIM-unlocked. I have not managed to find any info about how to restore the SIM-lock, but it is hopefully not neccessary for warranty. As far as I can tell, the unlock doesn't show anywhere, but of course all they need to do is to try a SIM-card from another operator...
If anyone has info about how to restore SIM-lock, then I'll update this guide with that info.
good job...
moderator make this "sticky"
3dward87 said:
good job...
moderator make this "sticky"
Click to expand...
Click to collapse
I second that, it contains links to stock ROMs, that'll hopefully stop a million topics about it lol.
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Da9L said:
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Click to expand...
Click to collapse
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
where can i read more information about jumpspl, how it works and everything?
eranyanay said:
where can i read more information about jumpspl, how it works and everything?
Click to expand...
Click to collapse
Look in the Xda-wiki, search and google, and not just in the Diamond section.
sticky please
this needs to be a sticky topic.
losdrivare said:
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
Click to expand...
Click to collapse
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Da9L said:
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Click to expand...
Click to collapse
Sorry to hear it and I'm afraid I'm out of ideas. After all, my little tutorial is primarily aimed at those whose Diamonds have working screens...
On another note, my Diamond came back from warranty repair and the repair shop had not noticed anything that would void my warranty. In the meantime I got myself a Topaz and now I've sold my Diamond, but I'll be checking this thread from time to time.
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
donsalari said:
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
Click to expand...
Click to collapse
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
losdrivare said:
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
Click to expand...
Click to collapse
Very true!!! Ok cool... Flashing back to stock!!
Thanks..
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Da9L said:
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Click to expand...
Click to collapse
Another idea: maybe you can find some a VNC program that also works the "other way" with windows mobile, so that you can get a window on your PC with the screen of your device?
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
herpez said:
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Click to expand...
Click to collapse
k3nnyboiboi said:
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
Click to expand...
Click to collapse
If you manage to install ANY stock SPL and then flash the correct ROM for your country and operator then you automatically get the correct SPL too, since stock ROMs include SPL. If you go to htc.com and type in your s/n then you automatically get the latest ROM for your device and operator.
k3nnyboiboi said:
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
Click to expand...
Click to collapse
I only link to the SPLs provided by olipro and cmonex in the hard-SPL thread. If you need closer info about SPLs I suggest you ask there. I only tried to revert back to stock SPL 1.93 myself and it worked just like described in first post.
Thanks Op
Managed to restore it no problem, but took ages