Develop Bugs

T-mobile ROM Windows Mobile 2003

Does someone has T-mobile ROM Windows Mobile 2003 retail version or know where i can download? Thanks

i have the 4.01.16 T-moblie english rom and it works very good

Check http://lumpistefan.dyndns.org

dcbrowne said:
i have the 4.01.16 T-moblie english rom and it works very good
Click to expand...
Click to collapse
Can someone upload or know where I can download. Currently T-Mobile shup down the upgrade link. Thanks!!!!

Hi LumpiStefan,
I went to you site: http://lumpistefan.dyndns.org/
but there are so many version to choose from. Can you recommend which is the best if I want:
(1) English PPC2003
(2) Works with my 1st generation T-mobile XDA1
(3) Stable release
(4) WModem (if any)
Thanks.

Thanks you guy. I got it. properly working. Many thanks for sharing.

HI LumpiStefan
I think that you may choose English PPC2003 for a Regular rom.

hi LumpiStefan,
Can you help me how to downgrade Radio stack to 4.20 or prior. Thanks because I would like to test XDA Manipulator to reset the IMEI or reset the minutes? Does the XDA-developers-SER-v12 can downgrade when I install it? THANKS

[Universal] Dopod 1.13.36CHT ROM upgrade

Traditional chinese ROM v1.13.36CHT for Universal:
Download @ buzzdev.net
Merry Christmas
buzz

Re: [Universal] Dopod 1.13.63CHT ROM upgrade
buzz_lightyear said:
Traditional chinese ROM v1.13.63CHT for Universal:
Download @ buzzdev.net
Merry Christmas
buzz
Click to expand...
Click to collapse
Thanks Buzz , its great
Merry Chirstmas and Happy New Year
Mwang

Hi all~
I have an error of sddaemon.exe after doing the update~
anyone got the same problem?

shunichi said:
Hi all~
I have an error of sddaemon.exe after doing the update~
anyone got the same problem?
Click to expand...
Click to collapse
SOFT RESET ,WILL BE OK

MY dopod900 dead at BootLoader
buzz, thx for your heartily help .
but here is an absolutely different result the apear to me .
before you post this rom, i have tried it myself. every step follows your instructions in "[Universal] - Decode and Encode NK.nbf" .
but when i have flashed the rom , the Dopod 900 stay deadly on the bootloader screen ... grrr... ohno...
after that , i got here again and found your new post, then, i downloaded the rom that you made for me ( of cource, an X'mas present for anybody else who encounters this problem, god bless you! ).
i try to find the different between the one you made and the one i done.
with my bare eye , i found what you give me lack some files. such as radio_.nbf , etc ..
but what will be the true reason that cause my Dopod 900 the reject me from entering the CE.... pls do me a favor again!...
ps : i flash the rom you made into that Dopod 900 twice, but the situation dose not any change ... i am sitting on a fire now ..
in my rom , i have the following files:
( originally from Xda_Exec_Upgrade_v113188.exe from the XDA ftp )
size name
156 RUU.conf
5,496 EnterBL.exe
200,704 RUU.dll
282,624 UI.dll
10,485,932 ms_.nbf
66,715,820 nk.nbf
10,633,900 radio_.nbf
269 nk.prj
66,715,648 nk.na
360,448 MaUpgradeUt_noID.exe
10,104 GetDeviceData.exe
.report over
then,buzz writed:
delete radio.nbf and ms.nbf.
Flash only nk.nbf
...........................................................................................................
Then, my response here:
In fact, cause my dopod900 deadly stayed at the bootload and can't enter the OS is the way that after the dopod900 being flashed ...use my own ROM i made.
but as i has posted above....i have flashed my dopod900 use your ROM (that only NK.nbf exist),....and it does stayed deadly at the BOOTLOAD state ever...
Do i need to delete the radio.nb and m_.nbf in my own ROM and flash onto my deadly dopod900 again?
...........................................................................................................
then, here is the report again:
Oh my GOD...I flash my own ROM (i have deleted ridio_.nbf adn ms_.nbf in it ) onto the dead dopod900 again and again.....but the way is no use!!!
the dopod900 Does stay dealy in the Serial mode!!!
Why?? Can you show me ,buzz? i want to know what reason cause it..

can you post the rom buzz made for you here or on the ftp???
thanks

zohaer21 said:
can you post the rom buzz made for you here or on the ftp???
thanks
Click to expand...
Click to collapse
can't you see?....just at the top of this thread Buzz has posted..

apparently i didnt see it before...when i posted the message it autologged on before i guess i was as a guest (AND THE LINK WASNT THERE)
hehe

HI,anyone can help me here?
If I flash the current Rom the New Rom
How about my extened Rom?
It will be change to a new extended Rom or just keep the same?
Since, I didnt see any fold named extended rom which I think should be as a part of new rom.
Sorry, for this question
But I am still very new.....
thanks for any reply 8)

Exec. said:
HI,anyone can help me here?
If I flash the current Rom the New Rom
How about my extened Rom?
It will be change to a new extended Rom or just keep the same?
Since, I didnt see any fold named extended rom which I think should be as a part of new rom.
Sorry, for this question
But I am still very new.....
thanks for any reply 8)
Click to expand...
Click to collapse
you can keep old extended rom , you also can make your own extended rom used extended rom unlocker to make your own,
have fun

you can keep old extended rom , you also can make your own extended rom used extended rom unlocker to make your own,
HI, how can I keep my current extended Rom?
Just upgrade use the DOWNLOAD files? Or I need do sth. else?
For the new extended Rom, how can I make it myself?
I have no idea about that.
Any tips?

thanx to buzz!
i have re-flash my dopod900 successfully now!!!!
i have find out the reson .
when my dopod is dead at Bootloader ....flash the Text CHT_ROM and succeed to enter OS..
then flash the CHT_ROM which buzz made onto it ..and then is Ok to enter.
IF i flash the CHT_ROM buzz made or my own ROM which i made onto the dopod while it is dead stay at the BOOTLoader , it can not be successful.
....Billion THX to BUzz.and guys who are the Best give me so much help.

Hello!
This is Hong Kong or taiwan chinese?
Is it the before Doped 900 test rom?

T buzzdev.net
I have seen it is 1.13.36 is not 1.13.63.
Is it right?
Thanks!

kimlui said:
T buzzdev.net
I have seen it is 1.13.36 is not 1.13.63.
Is it right?
Thanks!
Click to expand...
Click to collapse
This rom is 1.13.36 same as text rom also Taiwan rom , not HongKong rom, up right now no one psot HongKong rom , if you had please dump and post here , I will make ship rom and post here

WHAT is difference between tw and hk
ROM?

shunichi said:
Hi all~
I have an error of sddaemon.exe after doing the update~
anyone got the same problem?
Click to expand...
Click to collapse
dear friends
i did the same thing and have the same error as yours. all you have to do is to download the extended rom and installed it you will be find. the extended rom can be found here in this forum.
the filw name is __ dpd900 ... extended rom
hope can help

mwang said:
kimlui said:
T buzzdev.net
I have seen it is 1.13.36 is not 1.13.63.
Is it right?
Thanks!
Click to expand...
Click to collapse
This rom is 1.13.36 same as text rom also Taiwan rom , not HongKong rom, up right now no one psot HongKong rom , if you had please dump and post here , I will make ship rom and post here
Click to expand...
Click to collapse
hi mwang
i have a HongKong edition Dopod 900,can you tell how to dump ti's ROM,If I can dump it's ROM,I will post it.does grab_it can do it?

wlinsong said:
mwang said:
kimlui said:
T buzzdev.net
I have seen it is 1.13.36 is not 1.13.63.
Is it right?
Thanks!
Click to expand...
Click to collapse
This rom is 1.13.36 same as text rom also Taiwan rom , not HongKong rom, up right now no one psot HongKong rom , if you had please dump and post here , I will make ship rom and post here
Click to expand...
Click to collapse
hi mwang
i have a HongKong edition Dopod 900,can you tell how to dump ti's ROM,If I can dump it's ROM,I will post it.does grab_it can do it?
Click to expand...
Click to collapse
Thanks wlinsong , see here http://buzzdev.net/index.php?option=com_content&task=view&id=64&Itemid=1

thanks，mwang,I will try now

BENQ P50 update ROM v1.12-1.22 download

ROM 1.12
http://rapidshare.com/files/83419923/Benq_P50_FW1.12_ENG.rar
http://rapidshare.com/files/83417870/Benq_P50_FW1.12_SC.zip
http://rapidshare.com/files/83421621/Benq_P50_FW1.12_TC.zip
ROM 1.14
http://rapidshare.com/files/83423901/Benq_P50_FW1.14_TC.zip
ROM 1.15
http://rapidshare.com/files/79166896/Benq_P50_ROM_1.15_ENG.rar
ROM 1.16
http://rapidshare.com/files/83426136/Benq_P50_FW1.16_SC.zip
ROM 1.22
http://rapidshare.com/files/83414959/Benq_P50_FW1.22_ESN.rar
Software update + manual
http://rapidshare.com/files/83414440/XCSDtool_L1_V1.5.5_setup.rar
http://rapidshare.com/files/83414663/XCSDtool_L2_V1.5.5_setup.rar
http://rapidshare.com/files/83429237/XCSDTool_1_1.5.7_setup.rar -not manual
Password->GgDag

Hi, Bro. Please help to upload in other like megaupload or yousendit or send it to me at [email protected]. I cannot download from rapidshare (maybe the country IP is blocked). Thanks a million for your help.

can not upgrade
Hi Bro, managed to get v1.22 from somwhere else. By the way, when I upgrade until the end, it stuck there and inform me that "Data read time out" :-s. Something wrong here :-/. It happens with v1.15 also. Please help.

For v1.22 do I need to have XCSD Tools 1.5.7 to flash rom? I currently use XCSD 1.5.4 only, is it the problem. Hix, cannot download from rapidshare hence cannot download ur software bro.

It's very nice news!!!! thank you very much!

Maaan, it's real to install wm5 on my P50? And what is the lattest english FW version for BenQ P50?

Volandinio, what's nice news :-/, dun understand, so far still cannot install v1.22 hence dunno wheather it's WM5 or not, .
GgDag, pleaseeeeee help. Dead waiting for your reply.

Oops, finally, tried to download the upgrade tools and able to upgrade to v1.22. and guess what, haha, I laugh all the night, it's in espanol ... haha
GgDag, do you have v1.22 in Eng :-/

Thank you very much GgDag for posting all of these. I have repackaged the English 1.15 ROM to include detailed instructions for people who speak English here:
http://rapidshare.com/files/94657582/BenQ_P50_ROM_1.15_ENG.zip.html

Camp said:
Thank you very much GgDag for posting all of these. I have repackaged the English 1.15 ROM to include detailed instructions for people who speak English here:
http://rapidshare.com/files/94657582/BenQ_P50_ROM_1.15_ENG.zip.html
Click to expand...
Click to collapse
Very difficult to download from rapidshare. Possible to upload it somewhere else? I also cannot downlaod FW1.22 too. Thanks.

gnolihp said:
Oops, finally, tried to download the upgrade tools and able to upgrade to v1.22. and guess what, haha, I laugh all the night, it's in espanol ... haha
GgDag, do you have v1.22 in Eng :-/
Click to expand...
Click to collapse
Hi gnolihp,
I am not able to download XCSD Tools 1.5.7. Can you provide me an alternative link at [email protected]? Appreciate.

I have successfully download xcsd tool 1.57 from another website. But when i tried to install the firmware, it reached a stage where it said 'GPRS Code RS232 failed downloading'. Any advise?

Anyone post a picture !!
It's been a long time since i played with my p50. No longer using
Can someone post a picture here if you successfully loaded d WM5

Who has got v1.22 English rom? it is in esp. By the way 64 mb rom is not wm5 tool, bootloaders and kernels are different.

bhchng said:
I have successfully download xcsd tool 1.57 from another website. But when i tried to install the firmware, it reached a stage where it said 'GPRS Code RS232 failed downloading'. Any advise?
Click to expand...
Click to collapse
when you install firmware, you have to select the corrected file.
- bootloader *.bin
- OS *.bin
- Radio rom *.mot
if you select correct, it should be fined.

Waiting to ack
My P50 has installed the 1.15 firmware but without the wireless radio because every time i try to install it using the XCSD tool it would say device time out or something then it would ask me to remove the device from USB and remove the battery for a while then try to download again. The cycle continues on and on. Any suggestions on how to remedy this?
Thanks.

Who has got English 1.22 rom ?

ianlindong said:
My P50 has installed the 1.15 firmware but without the wireless radio because every time i try to install it using the XCSD tool it would say device time out or something then it would ask me to remove the device from USB and remove the battery for a while then try to download again. The cycle continues on and on. Any suggestions on how to remedy this?
Thanks.
Click to expand...
Click to collapse
I had this issue the first time i tried but i removed battery for a minute, performed a hard reset soft reset + power button for 3 seconds exited the software and reopened and then tried again and it worked fine.
hekimbaba said:
Who has got English 1.22 rom ?
Click to expand...
Click to collapse
I dont beleive that there is a 1.22 rom in english, take it they had even more bugs with other countries software! lol
Still get the issue where after composing a text if i put it into standby the keys are active.
Working on a program to change the mode but at work and code is at home so will bring it into work and have a blast tomorow incase that helps people.
Regards
Liam

Have any tried using the 1.15 Eng ROM with 1.22 GPRS radio upgrade?
Is this achieveable?
Thanks.

I really hate benq pocket pc p50. Battery died. No battery support. No software support. No product support. Benq has finished.

i-mate JAMA

Is there a WM6 or WM6.1 Professional ROM available for the i-mate JAMA, as I am thinking of buying one from expansys while they have got them for the baraing price of £89.95?
Roland

Hello to everyone,
I've this PDA too and I would like know about ROM to flash for the Italian version. As far as I know there's a WM6 version only for Chinese idiom not for English/Italian one.
Keep this in touch on my bookmark

sev7en said:
Hello to everyone,
I've this PDA too and I would like know about ROM to flash for the Italian version. As far as I know there's a WM6 version only for Chinese idiom not for English/Italian one.
Keep this in touch on my bookmark
Click to expand...
Click to collapse
Link for you:
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
WM6.0 WWE.

PhamQuang said:
Link for you:
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
WM6.0 WWE.
Click to expand...
Click to collapse
Smack! Thank you very much! I'll try it tonight...
Cheers!

PhamQuang said:
Link for you:
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
WM6.0 WWE.
Click to expand...
Click to collapse
Does this ROM work, and is it worth flashhing to my JAMA when it arrives today?
Roland

Rolandh said:
Does this ROM work, and is it worth flashhing to my JAMA when it arrives today?
Roland
Click to expand...
Click to collapse
yes its good to upgrade to wm6 ...
its very fast ...........
but i heared that imate jama now its coming with wm6...
but mine was wm5.........

Mobile Application in J2ME for Bluetooth Printer
Hi friends,I am new to j2me. I want to connect Bluetooth printer(Thermal Small Printer )to Imate Ultimate 6150 mobile. normally i connected through bluetooth its conneced ..fine.. now i want connect through the j2me mobile application to send the data to the printer and printer it should print the data..
now i am struggling to get the printer info from j2me mobile application.. also how to send the data please guide me... how to do that .. please guide me... give tips or useful links ...also what are the basic information i have read for this project.i know some basic about the bluetooth.. it has three method to transfer the data: (1)OBEX (2) L2CAP & (3) RFCON.. which one i can use... I use Netbeans to develop the j2me application also in unix platform
thanks
Techsivam..

PhamQuang said:
Link for you:
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
WM6.0 WWE.
Click to expand...
Click to collapse
my jama is showing error code 9 process after trying this version and now it is not working whenever i start the device every time it stucks on errorcode 9 process. after showing imate logo. i m very much confused wat to do now ?????????????

thanxxxxxxxxxxx worked 100%

if i load this rom, can i return to the original rom?

how to back the orginal rom
can anyone tell us how to back the original rom from jama

drsayed said:
can anyone tell us how to back the original rom from jama
Click to expand...
Click to collapse
hi sir help me i need ROM update i-mate jama 8197031.2.3p30
3cf9 thanks

hi guys ...im new to updating roms i want to update my "imate jama" (not the 101 or 202) plz confirm if the link posted in the previous post for wm 6.0 will work with this model and can i revert back to the original wm 5 in case something goes wrong.....plzzzz help me out here...

cool...i'll give it a try..

DjTany said:
hi guys ...im new to updating roms i want to update my "imate jama" (not the 101 or 202) plz confirm if the link posted in the previous post for wm 6.0 will work with this model and can i revert back to the original wm 5 in case something goes wrong.....plzzzz help me out here...
Click to expand...
Click to collapse
jama orginal rom(wm5) is only available at imate service centers.i've upgrated my jama.now l could'nt find any orginal rom for this device to return to wm5.

ASUS P535 PV-ROM WM6.1 CE OS 5.2.20273 (Build 20273.1.3.3)

Anyone has the above rom for asus p535.?
This rom is available at this site below however I cannot download it as the site is in vietnamese and I had difficulty understanding how to d/l. even after I had registered
I believe this is currently the latest rom build for asus p535 and when flashed will make asus come alive
The site is here:-
http://www.pdaviet.net/showthread.php?t=30592&page=3
If anyone has it please upload here for sharing.
Thanks

http://www.mediafire.com/?sharekey=b...21f78874fbf3e0
is this ok for you...
anyway.. every where I look.. it said.. WM 6.1. What is so difrent in this wm6.1. Nothing like cube or flow or animation from diamond. it's another windows for your mobile.
i testes versions from 19200 to this last one.
except someoane put some aplications to be "by default" in this rom... what is the diffrence from original rom?! And those aplications... 80% are not working in P535.

gxg said:
http://www.mediafire.com/?sharekey=b...21f78874fbf3e0
is this ok for you...
anyway.. every where I look.. it said.. WM 6.1. What is so difrent in this wm6.1. Nothing like cube or flow or animation from diamond. it's another windows for your mobile.
i testes versions from 19200 to this last one.
except someoane put some aplications to be "by default" in this rom... what is the diffrence from original rom?! And those aplications... 80% are not working in P535.
Click to expand...
Click to collapse
Thank You for responding to my request.
However the file cannot be downloaded. Please check or reupload...thanks once again

leekg said:
Anyone has the above rom for asus p535.?
This rom is available at this site below however I cannot download it as the site is in vietnamese and I had difficulty understanding how to d/l. even after I had registered
I believe this is currently the latest rom build for asus p535 and when flashed will make asus come alive
The site is here:-
http://www.pdaviet.net/showthread.php?t=30592&page=3
If anyone has it please upload here for sharing.
Thanks
Click to expand...
Click to collapse
Hello, I can not download it from there. The language barrier! I come from China! I need!
Please send to my mailbox ？
[email protected]
Thanks!

RuiYe said:
Hello, I can not download it from there. The language barrier! I come from China! I need!
Please send to my mailbox ？
[email protected]
Thanks!
Click to expand...
Click to collapse
Here is the file:
http://www.mediafire.com/?sharekey=bc936b5a789eac411686155677bb26856821f78874fbf3e0
Feedback if you like it

ipahl said:
Here is the file:
http://www.mediafire.com/?sharekey=bc936b5a789eac411686155677bb26856821f78874fbf3e0
Feedback if you like it
Click to expand...
Click to collapse
Thank you! I can already download!

seems nice... i have no problem with it... except the camera ...
When I press the camera button.. the aplication is starting...and suddenly stops and exit...
in order to be able to take pictures I have to start aplication again. After this camera si OK. But It;s kind of ennoyng to start the same aplication twice. This **** was also encounteres in official ROM WWE_EE00 Romania.
It never happened with pdaviet ROM for P535 but from Eastern FW.
Also.. GPS cacher is uselless and some of the aplication.
The device is OK with this ROM... you can try it...
I find enoyng that the battery is not shown... c'mon.. this is an 1300 mAh battery... is not design to last 7 days... so the battery level is important information for the owner.

Thanks
ipahl said:
Here is the file:
http://www.mediafire.com/?sharekey=bc936b5a789eac411686155677bb26856821f78874fbf3e0
Feedback if you like it
Click to expand...
Click to collapse
Thanks I am able to d/l now. Shall flash it thereafter on my asus p535

I use this ROM
and I really like it
It is totally different style
My camera is working fine