PocketCM ImageViewer DAILY build
PocketCM ImageViewer is currently a test version, the purpose is to experiment what's possible with image on our Windows Mobile device using the PocketCM framework.
New: OpenGL version (tested on Diamond, should work on touch pro, touch hd, and probably any device with hardware accelerated opengl. Compare opengl and software version, and post result!
To get the daily build : http://www.pocketcm.com/daily.php . Please if you're not confident with beta software, don't try this, wait for a release.
Important: The FPS counter shown IS NOT the actual FPS, the screen get only redrawn on specific event (finger, key press, etc..), so if you don't do anything with the app, it never redraw the screen, therefore the number of frame per second is very low. PLEASE DON'T COMPARE WITH OTHER SOFT FOR FPS, compare what you actually experience
ImageViewer 0.9 (08/03/2008)
- Set image to contact option, with cropping/scaling support.
- All image set to contact will have a maximum size of 320*320 (suitable for full screen call notification)
- New jpeg loader, up to 400% speed improvement on some image.
- Header buttons needs to be pressed on in order to work: avoid closing the app while rotating.
ImageViewer 0.8 (07/30/2008)
- Rotation support (scroll from top to bottom on the rightmost part on the screen when in slide or zoom mode).
- Variable zoom support (slide on the bottom on the screen to change zoom)
- Header button now disappear after a few seconds of inactivity, allowing you to see the picture fullscreen.
- Rewritten image loading engine, should be faster but mostly support bigger image. The good news is that those improvment will be in the next PocketCM Contact build.
ImageViewer 0.7 (07/24/2008)
- Added send via MMS, mail, ...
- Added delete picture (with confirmation)
- Added image caching, remember it's caching, so the first load still takes some times, the second load is faster.
- Bug fixes
ImageViewer 0.6 (07/21/2008)
- Favorite folder list: now you can mark folder as favorite, in order to get a shorter list of the useful folder
- Folder are sorted alphabetically not by image count anymore
- Improved look: comes with a default theme now
- Performance enhancement
- Bug fixes
- You can customize the theme in theme.zip, feel free to post if you make something that look great
ImageViewer 0.5 (07/20/2008)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- This is a major release, so expect lot of new things... and lot of new bugs
- Integrated "flow", grid, slide and folder browser in one app
- New image grid, showing thumbnail
- Press the upper right button to exit
- Press the mode button (@) to switch between flow and grid, or to go back to image list when in slide mode
- Press the back button (top left) to go back to the folder list
- Pressing on an image in flow or thumbnail mode, goes to slide mode
- For theme: the application always dump all the setting when exiting, have a look at dump.txt in your imageviewer folder to start customizing it. Like PocketCM Contact, you need to put a settings.ini with the settings you want to customize in it, they will be loaded at startup. Future release may include theme/options support, but for now, it's intented for testing
ImageViewer 0.4
- Folder list: your start the application, you'll see a scrollable list of all your folder containing pictures, simply tap on one to see the pictures in this folder
- Images smaller than screen aren't resized anymore
- Fixed zoom out animation: not it revert back to unzoomed image position correctly
- Zoom now focus on the tapped zone (tap on the head of a friend, you end up with his head zoomed
- Performance tuning
- Migration to PocketCM framework, settings documentation will come soon...
- Bug fixes
ImageViewer 0.3:
- Image rotation support: maximize the visible space by rotating image.
- Lanscape mode support
- Memory optimization
ImageViewer 0.2:
- zoom: tap on a picture to zoom, double tap to unzoom.
- improved memory management
ImageViewer 0.1
Initial version:
- To close: tap on the upper right corner (like if there was a close button)
- Copy (unzip) to a folder that contains image.
- ImageViewer load image in the background, if you see a white grey box in the top left, that means ImageViewer is loading image.
- Simply slide left or right to go to the previous/next picture.
I don't know yet if it will become a product one day, it's just a experiment for now, if you want it to continue to evolve, support me: http://www.pocketcm.com/donation.php
You can get it from http://www.pocketcm.com
Sounds good,
I put it on my (dutch) HTC Touch,
i put it in the folder were all my pictures are because thats what he wants.
then i opened it..
it was loading (gray box in the left corner)
then it asked me to choose a program to close because it does not have enough memory.
i closed everything that was running but it still needed more memory.
so in the end, cant use it.
Nice thing tene gotta test it.
anheuer said:
Sounds good,
I put it on my (dutch) HTC Touch,
i put it in the folder were all my pictures are because thats what he wants.
then i opened it..
it was loading (gray box in the left corner)
then it asked me to choose a program to close because it does not have enough memory.
i closed everything that was running but it still needed more memory.
so in the end, cant use it.
Click to expand...
Click to collapse
how much free ram do you have before starting it?
I'm using a Touch, and it works fine for me.
i dont know why it does this but its in my Storage card pictures folder and when i load the app it say the image name, then i see the little gray box but then it just quits, im runnning wm6 on a hermes, if i put the app in my main memory it load the preinstalled pictures, could it possibly be the image size?
looks great tene but doesn't run the actual pictures. i got it in the pictures folder and ran it. it gave me the little grey box on the upper left side, the file path in the middle of the screen, waited for about 10 seconds and than just closed. i have 22 mb of ram available and using HTC Wizard with touchflo rom.
i would really appriciate your help
yaron316 said:
looks great tene but doesn't run the actual pictures. i got it in the pictures folder and ran it. it gave me the little grey box on the upper left side, the file path in the middle of the screen, waited for about 10 seconds and than just closed. i have 22 mb of ram available and using HTC Wizard with touchflo rom.
i would really appriciate your help
Click to expand...
Click to collapse
what's the size of your picture?
tene said:
what's the size of your picture?
Click to expand...
Click to collapse
yep, that was the problem resized them and now it works
Hi,
Just tested it... quite a nice app. I believe there are more to come.
For a start, you have to place this app with the same folder of the pics. Correct me if I am wrong.
I like the smooth scrolling..
tene said:
how much free ram do you have before starting it?
I'm using a Touch, and it works fine for me.
Click to expand...
Click to collapse
Phone storage: 6.7 MB
Phone program storage: 11,7 MB
Storagecard: 2.3 GIG
I tryd it again after a reboot,
it says (in dutch)
not enough programstorage
Choose a task to close
at this moment i have running:
Imageviewer
file explorer
pocketcm
activesync
I just closed activesync,
and it continued loading the image and then closed the app
the image is JPEG, 384 x 472, 32KB
Dont know if this is to large?
Hi,
I tried this time with images from my DSLR that had been reduced from 3.3mb to about 80K.
Results
1. The files could be seen.
2. However, the images are pixelated (as if it was stretched from a small thumbnail)
3. There are a total of 8 images.
4. Whenever I scroll back and forth, it sometimes display the image path rather than the image (for a second or two) before returning backe to the pixelated picture.
5. Waited for 10 minutes, results is still the same.
@all
Can you retry I uploaded the wrong file.
The version you tested used lot of resources per image.
I tested on my touch with 2 mp image (so 1600*1200), I can't say loading is really fast, but sliding seems good to me (considering it's a 200Mhz device).
Works great on my German Touch.
Great app! I'll wait for Future versions =).
Hi,
I downloaded the new program.
The pixelated issue still exist. This issue does not exist on picture taken by my D810 camera.
Cheers!
JoeTeh said:
Hi,
I downloaded the new program.
The pixelated issue still exist. This issue does not exist on picture taken by my D810 camera.
Cheers!
Click to expand...
Click to collapse
Are you sure your picture aren't too small? what's the size of those picture?
Hi,
My images is from my DSLR at 6megapixels that had been reduced from 3.3mb per file to about 80K per file using photoshop at compressed rate of 7.
Hope that helps.
JoeTeh said:
Hi,
My images is from my DSLR at 6megapixels that had been reduced from 3.3mb per file to about 80K per file using photoshop at compressed rate of 7.
Hope that helps.
Click to expand...
Click to collapse
I need size in pixel.
Hi tene,
I was wondering if it would be possible to incorporate the PocketCM framework into a start menu browser?
would this be possible
thank you
Nice job, perfect for Touch
In French :
Etant plus facile pour moi de m'exprimer en français, juste pour confirmer le bug de certaines images qui pixelisent, d'aprés ce que j'ai vu c'est uniquement sur des images qui ont été redimensionées (sous photoshop pour ma part) alors qu'elles s'affichent bien ailleur (Pocket CM ou Visioneur d'origine). Peut être une histoire de compression jpg ?
A part ca c'est vraiment bien, j'en avais essayé un dans le même style posté içi mais qui marchait mal, j'espére que tu vas pousuivre le développement, il y a un vrais potentiel surtout qu'une eventuelle mise à jour de HTC avec la fonctionalité équivalente (du Nike) n'est pas sur du tout
Petite suggestion, un slide un peu plus réactif (ou rapide) un peu comme sur le cube se serais pas mal, j'ai un peu de mal parfois a faire défiler.
Related
i didn't find any tool that makes WM6 themes .
the WM6 themes are different than WM5 in few ways . like the bottom and upper bar are 3d ,
so if anyone knows a tool or app that creates WM6 themes please advise me .
WBR
a-h-t1 said:
i didn't find any tool that makes WM6 themes .
the WM6 themes are different than WM5 in few ways . like the bottom and upper bar are 3d ,
so if anyone knows a tool or app that creates WM6 themes please advise me .
WBR
Click to expand...
Click to collapse
Hi - build wm6 themes is v similar to wm5 themes albeit a few differences. I am plannig to write a minitutorial but not sure when this will done because i am cooking a rom at the moment.
For the app use my friend BenThon's app - ThemeGen CE http://www.codeppc.com/telechargements/themegence/themegence.htm
it now runs under vista
Follow my guide for wm5 themes here http://forum.xda-developers.com/showthread.php?t=275907
To keep the 3d bars - use basehue to define the colors or Navigation bar color 1 (do the same thing)
1st change for wm6
Do not use these keys in the key section Color_SoftkeyFlatCentre and Color_TitleFlatCenter as they will give you flat bars.
2nd change for wm6
You can use standard format theme or start image theme still in wm6 but most of the wm6 have orientation P & L themes. (portrait and landscape)
Thats all for now.
Tips from BenThon - author of ThemeGenCE
--------------------------------------------------------------------------------
If you cannot figure out all options of ThemeGenCE and nevertheless want to adapt - easily - a theme from this thread (borealcool themes,
black in Black with screen 320x240, same scheme colors) to your wishes, follow these steps :
1) Download one the themes above (in this thread).
2) Launch it in ThemeGenCE. Do not close the program !
3) In the bottom left panel, define the 3 items :
a) Define Folder for saving the new theme.
b) Define File Name for the new theme.
c) Define Internal Name for the new theme.
4) Build your 2 images (with the software you want, Paint, Photoshop... In bmp, gif, jpg or png. Windows Mobile and also Desktop Windows do not care about the extension of the image. It recognize the real format, independently of the extension. That is the reason why, for simplification, in ThemeGenCE I always put ".gif" extension.).
a) one for Portrait Mode. (240x294 pixels)
b) one for Landscape Mode. (320x214 pixels)
5) Copy the 2 images in the same folder as the program ThemeGenCE.
6) Delete the 2 existing files in this folder :
stwater_240_320.gif
stwater_320_240.gif
7) Rename your 2 images :
Portrait Mode Image to stwater_240_320.gif
Landscape Mode Image to stwater_320_240.gif
8) Go back in ThemeGenCE program and save the theme by clicking the fourth button of the main toolbar. You do not see update of the
images in ThemeGenCE but your new theme is now created with your own Images ! I have built the ThemeGenCE program to verify "on
idle" if the images have changed, so new images are incorporated in the theme even if the preview is not systematically updated.
9) You can verify that your new theme is really created. Exit from ThemeGenCE and relaunch it with your new Theme.
@meschle
thanx a million , now i will try to make my first theme
WBR
meschle said:
Hi - build wm6 themes is v similar to wm5 themes albeit a few differences. I am plannig to write a minitutorial but not sure when this will done because i am cooking a rom at the moment.
For the app use my friend BenThon's app - ThemeGen CE http://www.codeppc.com/telechargements/themegence/themegence.htm
it now runs under vista
Follow my guide for wm5 themes here http://forum.xda-developers.com/showthread.php?t=275907
To keep the 3d bars - use basehue to define the colors or Navigation bar color 1 (do the same thing)
1st change for wm6
Do not use these keys in the key section Color_SoftkeyFlatCentre and Color_TitleFlatCenter as they will give you flat bars.
2nd change for wm6
You can use standard format theme or start image theme still in wm6 but most of the wm6 have orientation P & L themes. (portrait and landscape)
Thats all for now.
Click to expand...
Click to collapse
is there a way to change the colour of the top start bar text???
fallenczar said:
is there a way to change the colour of the top start bar text???
Click to expand...
Click to collapse
Not really - if you change navigation bar color text - it only changes for a second when you apply the theme it then reverts. It was meant for wm2003.
You can change the color of the text of the bottom bar Color_CommandbarText in the wm5\keys section but not the top.
BenThon have you any suggestions? Is there a key we have missed out for the top bar color text?
Friendly, mark
wm2003 themes works too
the upper and button bar is
just like the bars on other versions
as it it's only asigned colour
nothing more
BenThon have you any suggestions? Is there a key we have missed out for the top bar color text?
Click to expand...
Click to collapse
Sorry Mark, "I am a poor lonesome programmer... " and I have not WM6 device!
But I am waiting for your precious advices to adapt ThemeGenCE for WM6, if "theming" without plugins is still actual...
Thanks for your help and your support, Mark.
Friendly, Benoît
Thanks BenThon - i think the key in question is the same as with wm5. I am poor 2 and do not have wm5 device to test.
take care
Dialpad CAB
How do you incorporate a customised Dialpad into the theme?
Not possible i hace tried. Although a tsk file is really a cab file it does not work the way its expected. The only way would be to install it all by cab but then the theme would not show under setting\today. (theme would be installed by the images not tsk) Better to do them separately.
Mark wrote : Not possible i have tried
Click to expand...
Click to collapse
I think it is possible !!!
If you don't name the file with TSK extension, but with CAB extension.
I think I have seen this in a forum.
And maybe a soft reset after...
Hi BenThon Yes i have installed this way e.g. with my first orientation themes - only problem is when you switch theme the today screen theme is lost because the theme.tsk was not installed only stwater.gif etc..
It will be ok for a one off installation but a problem when you switch themes.
Friendly - your pal.
ThemeGenCE V 2.5 - Preview WM6
ThemeGenCE version 2.5 has been recompiled with Delphi 2007 for Win 32 which allows to develop Vista compatible applications. ThemeGenCE stays compatible with earlier Windows versions.
Some minor bugs have been corrected.
This version now gives a new preview for the last Windows Mobile OS : WM6.
On the main form, there is a new button (on the right side in the middle) above the preview button already available in ThemeGenCE version 2.0. This button gives a preview for Windows Mobile 2002, 2003, WM5 et WM6, with a preview for "Today" and "Start" pages in portrait and landscape.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Below this button, you have the preview with "Skin" PDA choosen. WM5 or WM6 preview in the Skin PDA can be selected in the radiogroup (NB : this option is saved in a file for futher use).
Precisions about the algorithm for choosing Bars Hue (attempting to do the Microsoft algorithm) will be given in ThemeGenCE forum from CodePPC (also in english. "Poor english", sorry). Soon...
Link : ThemeGenCE page
BenThon said:
ThemeGenCE version 2.5 has been recompiled with Delphi 2007 for Win 32 which allows to develop Vista compatible applications. ThemeGenCE stays compatible with earlier Windows versions.
Some minor bugs have been corrected.
This version now gives a new preview for the last Windows Mobile OS : WM6.
On the main form, there is a new button (on the right side in the middle) above the preview button already available in ThemeGenCE version 2.0. This button gives a preview for Windows Mobile 2002, 2003, WM5 et WM6, with a preview for "Today" and "Start" pages in portrait and landscape.
Below this button, you have the preview with "Skin" PDA choosen. WM5 or WM6 preview in the Skin PDA can be selected in the radiogroup (NB : this option is saved in a file for futher use).
Precisions about the algorithm for choosing Bars Hue (attempting to do the Microsoft algorithm) will be given in ThemeGenCE forum from CodePPC (also in english. "Poor english", sorry). Soon...
Link : ThemeGenCE page
Click to expand...
Click to collapse
Thanks again BenThon
IMO the best thememaker!
meschle said:
Hi - build wm6 themes is v similar to wm5 themes albeit a few differences. I am plannig to write a minitutorial but not sure when this will done because i am cooking a rom at the moment.
For the app use my friend BenThon's app - ThemeGen CE http://www.codeppc.com/telechargements/themegence/themegence.htm
it now runs under vista
Follow my guide for wm5 themes here http://forum.xda-developers.com/showthread.php?t=275907
To keep the 3d bars - use basehue to define the colors or Navigation bar color 1 (do the same thing)
1st change for wm6
Do not use these keys in the key section Color_SoftkeyFlatCentre and Color_TitleFlatCenter as they will give you flat bars.
2nd change for wm6
You can use standard format theme or start image theme still in wm6 but most of the wm6 have orientation P & L themes. (portrait and landscape)
Thats all for now.
Click to expand...
Click to collapse
How can I put the 3D bars in WM5? To tell you the truth,thats the only attraction I have to WM6.
Algorithm for choosing Bars Hue (upper and lower)
Algorithm for choosing Bars Hue (upper and lower) with WM5 and WM6
Here is the method ThemeGenCE uses to attempt to simulate Microsoft algorithm for the choice of the upper and lower Bars Hue with WM5 and WM6.
Color 5 is the navigation bar color (Color 1).
With WM6 Bars are 3D. But if you define Specific keys like these one :
"Color_SoftkeyFlatCenter"
"Color_TitleFlatCenter"
they become "flat". Thanks to Meschle, for this precision.
Click to expand...
Click to collapse
Here is what I have posted here : http://www.codeppc.com/forum/viewtopic.php?t=10730
can someone please help me i have a few problems i'm kind of a NOOb to this theme making thing.......i am able to make the themes no problem format the pics crop all that good stuff...my problem is that when i'm in the theme maker it shows me dual color i.e. sky blue blended with yellow but then when i put the file on the phone it gives me a goldish color instead of yellowand no blended blue at all this is with top & bottom bars on today screen. Then i noticed when i receive a text i get that blended color on the top of the notification bar i have tried this about 10x's it does the same exact thing also cant get a solid black bar i downloaded an all black .tsk forgot from where but what happens is when it ok after selecting the theme from the today menu it initially loads with that black glassy look then goes to a grey within a sec is there anyway to get that black look or is it impossible....please help me i've been at this 4 hrs any help would be appreciated.....a step by step tutorial would be nice if anybody has one or know where i can view one
At&t Tilt is my Phone
Is this a Freeware ?
http://www.codeppc.com/telechargements/themegence/themegence.htm
should i just download the English download on the link & run it on Pc
thats all ?
Please Help
black3188 said:
...my problem is that when i'm in the theme maker it shows me dual color i.e. sky blue blended with yellow but then when i put the file on the phone it gives me a goldish color instead of yellowand no blended blue at all this is with top & bottom bars on today screen...
Click to expand...
Click to collapse
Don't forget that ThemeGenCE can make themes for WM 2003 to WM6... I understand that it may be a little confusing for those who have not followed OS evolution. The preview on the main page is for WM 2003. You can have previews for new OS by clicking on the buttons on the right middle of main page.
ilordvader said:
Is this a Freeware ?
http://www.codeppc.com/telechargements/themegence/themegence.htm
should i just download the English download on the link & run it on Pc
thats all ?
Please Help
Click to expand...
Click to collapse
Yes, it is a freeware (and will stay a freeware...) ! Bonus ! on the download page you have a link for an english tutorial.
BenThon;1806601| said:
Yes, it is a freeware (and will stay a freeware...) ! Bonus ! on the download page you have a link for an english tutorial.
Click to expand...
Click to collapse
Thxs & i found a Video & helped alot so wanted to share with others
How To Make Themes Using ThemeGenCE
http://www.youtube.com/watch?v=mv4C1KsY0S0
Welcome to the "EnergyROM" thread !
This development thread is for my "Energy" custom firmware series for the HTC Diamond device.
The current build numbers and date can be seen in the title of this thread. I usually update the ROMs about twice a week, as new builds come down the pipe or as new software/updates are available.
I build my ROMs with four main goals.
Eye candy ( I want my ROM to look great and for it to all flow together nicely)
Speed !!!
Smoothness, consistency and good aesthetics
Stability through private beta testing before public release
I pre-configure a lot of things in my ROM, because when I flash it on my phone, I want it ready to go. So, expect the backlight to be set at the maximum brightness, the ringtone, sms/email and other notifications to already be set. Doing it this way, makes for a nice ROM that's ready out of the box.
I recommend learning to backup your settings with either Sashimi or UC (User Customization). Backing up with SPB Backup or similar products, is NOT recommended, as they tend to backup the previous release's registry/file bugs as well!
Looking at the download folder you will find two core versions of my ROM.
The 21916 Build which is the most reliable, fast and bug free release. It has the Start menu button at the top left corner just like a stock ROM. I recommend you start with this first!
The 29022 Build that's the latest in the 6.5.3 series with the Start menu button at the bottom left corner and big softkeys. These builds reflect the latest cutting edge technology from Microsoft. These are also much more finger friendly throughout.
---------------------------------------------------------------------------------------------------------
You can stay up to date on the status of my ROM development by "following" me on Twitter.
It's definitely the fastest way to get in touch with me and please don't be afraid to tweet me if you see major issues with the ROMs.
I generally do not answer "support" questions on Twitter, as it's really not the proper medium for that. Service packs and quick fixes will always be released as links in my tweets and that's definitely the fastest way to get a fix for a ROM.
To follow me on twitter, click here!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This post features all the Cookie Hometab based ROMs I make.
The original ROM is the "energy" version and that's a good starting point. All the rest, are themes applied to that ROM.
They all come with Cookie 2.0 (the ROM filename will be labeled "Cookie.2.0, plus the name of the theme)
You can see more screenshots of these ROMs a couple of posts down.
The two Cookie versions look pretty similar, but Cookie 2.0 has multiple sliding homescreens/freely moveable widgets (similar to Android) and
quite a few more features and speed.
My own 'Energy' style
This is the best ROM version and the way Sense should have been designed by HTC
Offers the biggest customization ability out of all versions. You can add/remove bars or items on the homescreen, arrange items any way you like, plus lots of extra features
Three built in lockscreens. "HD Mini" style, Manila style or Windows style
3 pages of quicklinks with a configurable amount of shortcuts displayed
3 Homescreen layouts to choose from, as seen in the above screenshots, all completely customizable !
Link to the original thread for this mod is here > Click <
Dinik's "Anastasia"
This ROM series is skinned with Dinik's great "Anastasia" theme applied on everything.
Everything has been skinned, including Sense, the start menu items, the soft keyboard, parts of the dialer... etc
_LeCiel_'s ".sencity"
This ROM is themed with the .sencity theme released by _LeCiel_ who is a very talented artist ! Please support his work if possible.
.sencity is not %100 complete yet, but _LeCiel_ is working hard on finishing his work to completely skin the entire ROM.
Link to the original thread for this mod is here > Click <
DJC & Bobsbbq's "Touch Of Glass"
This ROM series is skinned with DJC's "Touch of Glass" theme throughout Sense and the Start Menu
More will be skinned as DJC continues his work on the theme in the future...
Link to the original thread for this mod is here > Click <
ElCondor's "GTX"
This ROM has the white GTX theme applied
Android styled taskbar, matching dialer, matching start menu background and Action screen background
GTX is a total reskin of the operating system, so expect a very different (white) experience
Link to the original thread for this mod is here > Click <
ROMs mostly created for enthusiasts...
'Energy'
This series retains the stock functionality of the Sense UI. The files have been compressed by "CFC" compression. making the UI lighter and faster
This ROM still retains my theme and style, plus all the regular apps you find in my ROMs.
There are no homescreen addon-ons in this ROM. The best speed and the most stock functionality.
MaxSense UI (android style homescreen)
This is a complete rewrite of the Sense homescreen, by maxycy.
It features a 3 screen, Android style, homescreen with widgets! The widgets can be placed ANYWHERE on the three screens.
75 Quicklink accessible on all tabs
You should really visit the original thread for this mod shown on the next line to see all the features!
Link to the original thread for this mod is here > Click <.
Titanium (ROMs for raw speed!)
This is a minimal ROM version without Sense in it. It's used primarily for people that like to customize the default 6.5 homescreen (Titanium)
You can use it to install alternate homescreen interfaces like SPB Mobile Shell, etc
Very low memory footprint and good battery life, but very simple and lacks a lot of features that you would otherwise have available in Sense...
Click the following link for addons, XDA_UC help and various cabs specific to this ROM series
List of installed applications
Games
Bubble Breaker
Solitaire
Teeter
GPS
Digital Compass
QuickGPS
Google Maps
HTC GPSTool
ChartCross GPS Test
Internet
Opera 9.7
Jbed Java
RSS Hub
Remote Desktop
A couple of widgets for ROM Updates
MSN Messenger and Windows Live
Barnes Noble eReader
Facebook
Palringo
Windows Live
Messenger
Bing
Send and Receive All
Data Controller
Multimedia
Audio Booster
FM Radio
MP3 Trimmer
Voice Recorder
YouTube
TCPMP
InCall Recording
Office Mobile
Full suite of Office Mobile 2010
Tools
BsB Tweaks
Flashlight
Lock Device
Microsoft MyPhone
Registry Editor
PIM Backup
FDC TaskManager
Wifi Router
XDA UC
My own Settings Exporter tool
Shake and Save (screenshot app)
Wifi Monster
Wifi Router (internet sharing app)
tBattery
On the Start Menu
Backlight control app
Total Commander
Rotate Screen (by clicking icon or by pushing down Send key)
Windows Marketplace
ROM features at a glance:
Very fast startup time. You won't find any startup wizards in this ROM. You'll be up and running in a couple minutes after flashing the ROM and ready to go. No need to spend time to set everything up.
XDA_UC is built in. It will import your custom XML and REG files from your storage card after first boot.
My own Settings Exporter application is found in the Tools folder. Use it to export all your settings after you customize the device. When a new ROM comes down the line, use it to import everything and save time.
Everything is setup to use the phone right after flashing. Sounds, notifications, all options, etc
The HTC Messaging client is removed, leaving the windows built SMS client for much faster texting, but still able to use a nicely skinned Sense text messaging app with "iphone style" messaging bubbles.
Release notes
July 4th, 2011
Wifi Router app updated for more compatibility (especially VGA devices)
USSD Service app fixed and updated
Removed rogue Imagio bootup welcomescreen and animation
Fixed InCall volume issues for 21916 VGA devices ROMs
Fixed Bubblebreaker for 21916 ROMs
VoIP components thrown back in
-----------------------------------------
July 2nd, 2011
Updated to 29022
Bluetooth HID profiles cooked back in
Fixed Opera favorites problem in Titanium ROMs
SIM Manager not opening on some devices, fixed
Camera version 6.45 from Oboe integrated in all HD2 specific ROMs
Added Ninja Duck's "No WIFI Sleep" cab to the addons directory to stop wifi from sleeping during HTC Wifi Sharing operations (http://www.energyroms.com/Addons/Regular%20Addons/index.php)
Sencity skinned dialer made by "eac" (only on some devices, HD2 and VGA excluded)
June 1st, 2011
Fixed Music tab bug where songs don't play all the way or get stuck on "searching"
Fixed blue disabled button situation in certain instances, but keeping the WM contacts readable
WorldCard Mobile removed from ALL ROMs (useless, broken, app... if you want it there's plenty
of cabs for it around)
Some ICONS are now squared for better compability with SPB and other apps
Audiobooster skin for Touch of Glass ROMs (WVGA only)
Added nice 28 day Agenda MOD to Calendar tab in Sense (thanks to slabbi! not sure if this got cooked in ?!? feedback please...)
Week view in Sense Calendar tab is now more legible with a blue highlight instead of grey
Palringo updated to 2.6.2
Stock CHT Layout restoration file fixed for all ROMs
GTX Taskbar mod to 21916 ROMs for better visibility of task manager icon
GTX Skin for TCPMP
GTX Skin for the MP3Trimmer
GTX Mod for the CommManager
All of the above GTX mods are thanks to member eac ! Romanian power! lol
GTX "music widget not displaying on homescreen bug" fixed
Slight adjustment to HD2 GTX dialpad
-----------------------------------------
2010 (trimmed) -----------------------------------------------------------
2009 (trimmed) -----------------------------------------------------------
2008 (trimmed) -----------------------------------------------------------
User maintained FAQ post
How to install a ROM on diamond ?
• WARNING : flashing can brick your phone and you'll loose your device guarantee !!!
If these consequences are too important for you then don't flash your rom !!!
FLASH AT YOUR OWN RISK !!!
• Check your diamond version = GSM or CDMA ?
This thread is dedicated to GSM diamond !!! Never install GSM rom onto CDMA device and vice versa!!!
• Read Tutorial made by tnyynt HERE
What is mtty ?
• mtty is a PC app which is useful to prepare your device for flash (but not only)
• read MysticGenius thread HERE
What's the difference between soft reset & hard reset ?
• soft reset = safe operation, just reboot your device (switch device off-on by using power button or specific app as XDAshutdown/Slide2Shutdown by example)
• hard reset = CAUTION! This will erase all the data and your device will be reset to factory settings : make a backup of your important data before !!!
• How to Hard Reset your Diamond with hard keys :
1. Press and Hold the VOL. DOWN + ENTER (central key) buttons, then press RESET at the back with the stylus tip till message appears.
here you have 2 options :
2a. To HARD RESET (format internal memory only) = Press the VOL. UP, or press any other button to cancel.
2b. To HARD RESET + format internal storage = Press the VOL. DOWN, or press any other button to cancel.
• How to Hard Reset your Diamond with wipe device app :
1. go to start>settings>system>wipe device
2. in old version you'll have to select the option of your choice : erase internal memory only or erase internal storage only or erase both.
In last version you can only erase internal memory (you can't erase internal storage)
3. type "1234' sequence and click yes
What's the difference between internal memory & internal storage ?
• internal memory = main memory of your device (dynamic memory shared between storage, program and PP), this kind of memory is faster than NAND but space is very limited on Diamond
• internal storage = 4Gb NAND for storage only (low speed but large space), also called SD card on other devices but this one is non removable
I flashed my rom but my diamond is stuck at boot &/or soft reset itself continuously ?!
• Either you flashed a rom not designed for your device or you flash with wrong HardSPL
• go to serial USB mode then try mtty method
What is Serial USB mode ?
• Also called Bootloader mode, this mode allow you to connect your device to your computer in order to use mtty or to flash.
• Hold vol.down key (don't release it till you see rainbow screen!!!) then with your stylus press reset button. When you see rainbow screen with "serial USB" message then release vol.down key & plug your phone to your computer.
What RADIO should I use ?
• There is no better Radio than another cause It depends on your device usage (phone/GPS) & location : battery drain and Joule effect (heat loosened by battery/processor...) will be different.
• The best is to make your own opinion by testing by yourself : check sblop thread HERE
• Good Diamond radios : 1.08.25.08, 1.09.25.23, 1.11.25.1, 1.13.25.24, 1.15.25.14, 1.17.25.09
Battery drains too fast, what can I do ?
• With normal usage (a few calls/texts, check mails) battery should last a day or two
• deactivate 3G & set GSM instead
• Backlight (the more you increase luminosity the more you decrease battery life) is set to max by default so set it to autoBacklight instead
• activate power management with DiamondTweak
• avoid battery eater like WiFi/BlueTooth/GPS/Games/Video
• check apps running into background : disable push internet & other functions that require data connection like weather...
• try a different RADIO (it depends on your usage/carrier/location)
• recalibrate the battery
• if nothing helps you then consider buying a 1350mAh power battery (900mAh by default)
How to recalibrate the battery ?
1. Discharge the battery completely
2. Remove the battery & let it rest 1H at least
3. Re-install the battery & charge your diamond (but keep power off) till the led stop blinking
4. Remove the battery & let it rest 1H at least
5. Re-install the battery & turn power on
My memory usage is very high !?
• use Tachi Disabler to remove HTC dialer & use WM dialer instead : you'll free ~5Mo
• Pay attention to the skins you install afterward : some are not compressed and can eat a lot of memory
• use htcAddicts CleanRAM to clean & free memory
• reduce PagePool to 8Mo
• enable compact start menu into settings menu to free ram ~20Mb
What is PagePool (PP) ?
• PP is a cache partition which allow the device to speed up when a function has been already called into mem : the other side of the coin is that PP is taken directly from RAM. So you'll have to find the optimum balance between speed/ram
• 8 - 12 Mo is a good range for diamond
• Read shaks1979 thread HERE for more info
I don't see Opera and GoogleMaps ?!
• only InternetExplorer is available because Opera & GoogleMaps can be installed on internal storage (you can choose destination drive only when you install cab by yourself) to save internal memory
How to install a cab ?
• copy the cab to your device either by activeSync or by DiskDrive mode. Use your file explorer to click on cab then installation will start.
• XDA_UC is a smart way too
What is XDA_UC ?
• Read THIS
I can't sync my phone !?
• Did you install Microsoft ActiveSync/WM device center ?
• It also might be due to your firewall/anti-virus (allow activsync into firewall setup).
• You can either uncheck enable faster data synchronization under ActiveSync option into start>settings>connection>USBtoPC
• if you've just flashed your device or made Hard reset then you'll have to create a new partnership with your computer
I don't see 3G anymore into taskbar !?
• Run connection setup wizard (settings>connections) to configure your network connections
• different bands available :
GSM = GPRS/EDGE = 2G/2,5G = G/E
WCDMA = 3G/3G+
HSDPA/HSUPA = 3G+ = H
• when you force radio to WCDMA you should have 3G/H logo into taskbar but it drains battery a lot and be careful of your gonades
• set GSM when you don't use data
• switch to auto when you wanna use data
• It also depends on your operator network in a particular place (city/metro/mountain...)
How to tweak Sense2.5 ?
• Co0kie Home Tab : Read Co0kieMonster's thread (Sense2.5 only!!!)
I can't unzip the archive : archive corrupted !?
• you need the last 7zip because of new LZMA2 compression
XDA_UC FAQ
The XDA_UC cooked in my ROMs is modified from the stock XDA_UC made by Noonski. Great addon, by the way... Noonski did a great job with this !
The version in my ROMs is trimmed down to fit the needs of my ROM series.
Some of the extra features are:
It will copy shortcuts (.lnk files) found in \XDA_UC\Start Menu\ to the device's start menu folder (\windows\Start Menu) in the hierarchy that it finds on the storage card. For example: Let's say you have a navigation package on the storage card, like Navigon. If you make a shortcut to the navigon.exe file as Navigon.lnk and copy it to \XDA_UC\Start Menu\GPS\ as "Navigon.lnk" then on a fresh ROM install it will copy any shortcuts it finds there to the same location on the device, so it'll end up in \Windows\Start Menu\GPS\. This works for other folders on the Start Menu as well. Just put the shortcuts in \xda_uc\Start Menu\ in the folders you will like the shortcuts to appear to, on the device.
It will copy a custom splash screen from \Storage Card\XDA_UC\welcomehead.192.png to \windows automatically and overwrite the one in the ROM.
It will copy a custom Sense background found in \Storage Card\XDA_UC\sense\wallpaper_sense.png to the device and set that wallpaper as default in Sense. So rename your wallpaper as "wallpaper_sense.png" and drop it in \Storage Card\XDA_UC\sense\ and on the next ROM flash that wallpaper will become your wallpaper in Sense.
Other than that XDA_UC works as designed by Noonski and it will do the following things:
It will automatically import your PPCbackup (*.pib) file found in \Storage Card\XDA_UC\
It will install custom XDAS scripts found in \Storage Card\XDA_UC\
It will silently install CAB files found in \Storage Card\XDA_UC\
It will install special CAB files that require user input (such as Agreements or any type of prompt) found in \Storage Card\XDA_UC\SD
It will silently import REG files found in \Storage Card\XDA_UC\
It will silently install REG files found in \Storage Card\XDA_UC\Exporter, as exported by my own Settings Exporter, ONLY if the "automatic" file is also present in that folder (and it most cases it should be, enable that option in the Settings Export application's menu)
It will silently import XML files found in \Storage Card\XDA_UC\
It will silently import CER files (usually Exchange certificates) found in \Storage Card\XDA_UC\
It will silently run custom MSCR files found in \Storage Card\XDA_UC\
That's it, but don't forget to checkout the Addons folder and look in the XDA_UC section for tips and tutorials on how to export your email/wifi settings and various little .reg and tweaks you can add to your XDA_UC collection.
As always don't forget to check what installs automatically before reporting a problem with the ROM. Most of the time, if you notice you have a problem that nobody else is experience is because one of the cabs you dropped in the XDA_UC folder is installing automatically while you don't even think about it.
Downloading....
Report back ASAP...
Thank you very much for COOKING the GREAT ROM!
Is this the same one as the last update in the previous thread? Or another build?
the_scotsman said:
Is this the same one as the last update in the previous thread? Or another build?
Click to expand...
Click to collapse
If this is the followup pls mention -discontinued thread or something - on that other thread , looks a bit odd two postings in a row on nearly similar developments.
Must say that the rom looks very attractive and promising, will give it a try soon.
cescof said:
Aaaarg first link is down, an second file is corrupted....
Regards
Click to expand...
Click to collapse
First link works ok here. I'm downloading link 2 now (Titanium)
You are a wonder
There is a cook to cook, depending on the desire, but you honestly think, as we think.
Thank you very much and respect you lower hat
Hi NRGZ28,
how can I change Titanium from 4 to 3 icons per row?
Thanks for this great ROM.
seeya
please a mirro for titanium vers. Iv'e my diamond just sync and ready for upgrade but i've crc problem with that download...
Regards
Diamond Upgrade
Hi there, First thanks for these two roms.
I've downloaded the first one and will flash soon. After I write my impressions.
I didn't catch what is the difference between these two roms?
what is the size of free Ram and rom on strandard version(with touchflo)?
@leakhanak
Thanks! Guess the upload wasn't done yet when I tried to download.
The ones with broken RAR's, did you notice this:
LINKS WILL BE DONE UPLOADING IN A FEW MINUTES!
And the fact that you posted several minutes after his first post . I would sugggest yoou retry...
Simply one word:
PROFESSIONAL!
luzok said:
Simply one word:
PROFESSIONAL!
Click to expand...
Click to collapse
I AGREE with YOU!
This NEW rom is great!
- Memory is around 62% - 67%
- Start menu is really smooth.
- Opera works!
- SIP works!
- Volume Control works!
- Calculator Works!
- Everything is even faster then your previous builds
I haven't got bugs so far. Will let you know when I found one!
Thanks!
I have created a win32 API for C++ that mimics HTC's Sense UI Look 'n Feel... More informations on my website: charlie-soft.com
DOCUMENTATION : http://charlie-soft.com/Software/Manila_SDK/html/
This SDK is designed for speed: .NET applications are usually very slow to load and not fluid. I use some tricks to improve speed, like drawing only area having changes, scrolling without backbuffer or creating textures for text (GDI text drawing was slower…).
What’s in the box:
PNG resources for VGA/WVGA. They can be easily modified. SDK will resize automatically the resources if your device has a smaller (or higher) resolution!
Design your app for VGA, the SDK will adjust the layout for other resolutions!
Full Finger Control.
Source files (.cpp and .h) of library.
Source files of example.
Class:
MyEditControl: Edit box with different width. Easy get and set text. SIP detection: scroll Edit area.
MyItem: Button (3 types), checkboxes and switch (TripleState!). Event on click, visibility and state can be changed/get easily.
MyPanel : This element is not visible but is used to bring together elements. This element can have a title and dotted separator between each element.
ChildSection : Contains a subsection which is displayed with a sliding effect.
MyLabel: Print text with different font and color.
MyPictureBox: To print image (png, jpg, bmp, gif…)
MySelector: Like the HTML select. Scroll screen if list is out of screen (see video below).
Section: A section is a panel which can be scrolled up/down. It contains the different elements.
MessageBoxSense: Four type of messagebox: info, Ok/Cancel, Abort/Retry and Yes/No.
MySlider: A simple slider of any size... The min and max values can be changed easily, as the cursor position.
Change log
V1.6.4
Added the possibility of multilines in edit control
V1.6.3
Added possibility to add picture to slider of ChildSection...[bug solved]
Explorer bug solved
V1.6.2
Added an event when user click on screen...
V1.6.1
Memory usage improved
V1.6
Loading of image is now safe (use video memory by default but if problems use device memory)
File Explorer
Icons
Speed and memory improvement
V1.5
just add possibility to change color of text for hover and selected...
Minor bug changes:
items out of screen no longer try to redraw
text of items recompute their size when changing
background color is correctly changed
The SDK is now multi thread safe!
Add the possibility to right clicks (long press)
Add the possibility to hook windows message (WM_ACTIVATE for example)
Add the possibility to have a bottom bar.
Add the possibility to have a background image (landscape and portrait).
If the app is allready started, close the new instance and show the previous one.
MySelector can be scrolled if the list is too long.
Text is now printed with alpha transparency.
Compatible with any character (hebrew, vietnamese...).
MyPictureBox can now be stretched.
Memory usage reduced.
V1.4
Minor bugs fixed
Add the possibility to show MessageBox without a main application.
V1.3
Background can be transparent ! (see this app for demo)
Native drawing (DirectDraw was too slow in landscape)
Slider can have a force feedback (see this app for demo)
V1.2
MySlider added
drawing process rewrited: less redraw->less computation->less CPU utilization -> battery consumption reduced
Loading optimisation
The layout is now independent of screen resolution!
top taskbar is occassionally cleared [fixed]
White screen, touching the panel brings it back [fixed]
landscape items position incorrect [fixed]
V1.1
landscape compatible
Abort/Retry added to MessageBoxSense
TripleState Checkboxes and OnOffItems added
FAQ
is QVGA resolution supported?
Yes, SDK will find the correct resolution and select the appropriate resource resolution. The SDK will delete the other resources...
have you planned to extend MessageBox types to Abort/Retry?
Yes, to create one:
MessageBoxSense::show(L"Hello",L"Try again ?", MESSAGE_ABORTRETRY);
is this landscape compatible?
Yes but having refresh rate issue. Seems to be a DirectDraw problem (S2U2 was subject to the same issue...)
If someone know how to solve this problem, send me a message !
Back button too slow.
You can change the speed anim using this function: changeSpeed(double nbMilisecond)
why aren't you including some TripleState Checkboxes and OnOffItems ?
Both are now included:
new MyItem(1,5,15,ITEM_IS_CHECKBOX,ITEM_THIRD_STATE,L"My third checkbox (Third state)");
Other apps
Wake on Wan is a new app which use this SDK. Sources are available!
Quick shutdown is a software which use this SDK too. It can turn off, restart or set the phone in sleep mode. Sources are also available!
"
Sense SDK win32 C++
For informations about SDK (installation, use compile...), see here: http://charlie-soft.com/Software/Manila_SDK/html/
Good work ! thanks for sharing hope devs will use it.
Hello my friend !
Great work !
( C'était exactement ce que je cherchais en c++ pour mes MFC smart device !!! )
Great Work, Thx for the source!!
Really great work!
but I have two questions:
- is QVGA resolution supported?
- have you planned to extend MessageBox types to Abort/Retry?
thank you
regards
NIce work
Altough i don't really know what todo with it... i instalt the example.cab and it was really smooth!
Only one thing if i go to other controls and i want to change the value then the onscreen keyboard should show up right? But it doesn't.... So i slide my qwerty keyboard open, and in landscape i get an error message: DDERR_SURFACELOST(back buffer)
I dont know what it means... is this landscape compatible?
Good job man !
Nice works !
I just have a feedback, I find too slow the animation when you click on the "back" button, is there is a way to speed it up ? (or disable simply the animation)
SDK Manila
Hello all !
I will try to answer all your questions. So :
- is QVGA resolution supported?
No but easy to implement... Just resize resources to correct resolution. I will post resources shortly.
- have you planned to extend MessageBox types to Abort/Retry?
If it's something wanted, I will do it.
- is this landscape compatible?
No, not yet. But will be in next release!
-Back button too slow.
I will add a method to set the speed of animation... in the next release
-Bug with hardware keyboard
The onscreen keyboard don't show up and I don't know why... I will look around for a fix.
If a developer wants to translate .NET applications into C++, feel free to post I will try to help you!
There is still lot of work, but I will try to do this quickly!
petititi said:
- have you planned to extend MessageBox types to Abort/Retry?
If it's something wanted, I will do it.
Click to expand...
Click to collapse
thank you for quick reply. I need this extension for my app "htc menu loader" (link in signature) to migrate from .net to c++
again, really great work. You are making something that HTC should have done months ago.
Great project !
I don't know if you notice but I disabled the bottom taskbar... Do you think that I should add the possibility to enabled it? I saw that your application needed one...
I hope you will find my SDK easy to use !
Hey, this looks awesome.
Question though: I'm just shy of clueless when it comes to making an actual working app. Is there any place I can go to read/learn the coding I will need to actually use this?
Application win32 c++
You can use the example application included into the SDK to learn basic stuff or you can download this application: WakeOnWan. It’s based on my SDK (here are the sources).
You need some basic knowledge about Object-oriented programming and C language. I try to explain how to use the SDK in the example using comments or on my webpage.
I will also post a short tuto in second post...
Very, very nice! The demo runs very smoothly on my stock Touch Pro 2.
petititi said:
You can use the example application included into the SDK to learn basic stuff or you can download this application: WakeOnWan. It’s based on my SDK (here are the sources).
You need some basic knowledge about Object-oriented programming and C language. I try to explain how to use the SDK in the example using comments or on my webpage.
I will also post a short tuto in second post...
Click to expand...
Click to collapse
Awesome thanks!
What's sad, is when I was young, I used to be able to code in C. Made my first video game when I was 6 on a Commodore 64 (ok i dated myself here) Now, can't remember very much
C++ ? It's just like riding a bike!
Hatefly said:
Awesome thanks!
What's sad, is when I was young, I used to be able to code in C. Made my first video game when I was 6 on a Commodore 64 (ok i dated myself here) Now, can't remember very much
Click to expand...
Click to collapse
I'm sure you can!
It's just like riding a bike - you never really forget how. And we are here to help you to refresh your memory.
petititi said:
I'm sure you can!
It's just like riding a bike - you never really forget how. And we are here to help you to refresh your memory.
Click to expand...
Click to collapse
Sweet thanks! Just downloaded an ebook on c programing.
Sounds (and looks) great, although there are still to many glitches (like not working in landscape etc.) which are preventing me from using this package.
But I have one question, why aren't you (all) including some TripleState Checkboxes and OnOffItems ?
I need them often but you cant find such controls online - not to speak of sense.
TripleState Checkboxes ?
Hello,
the TripleState Checkboxes is a simple feature I can add. To be sure, TripleState Checkboxes will looks like:
And tripleState On/Off:
I will include them in the next release... Be patient, the next release is coming soon and adds support for portrait and fixes a few bugs...
Hi all! I've cooked this basic and light Sense 2.5.2019/Titanium ROM for everyday use.
It has the same packages as my Sense 2.5.2016 ROM. For this ROM I'm using Sense 2.5.2019.1914.0 ported by abrasive.
Dowload my Kitchen. It has the .erv files for both roms.
Mirror
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dialer: BsB Black Dialer
IME: EZinput2.1
Themes: custom m.carroll PureBlack3, and Classic Blue
PagePool: 10
free RAM: 30-35 MB (at startup with Sense)/54 MB (Titanium)
Apps included:
Album 3.2
Arcsoft MMS
Audiobooster
cleanRam v2.3
Facebook
Marketplace
Office Mobile 2010
Opera Mobile 10
PHM Registry Editor v0.70
QuickGPS
RSS Hub
Slide2Shutdown
StreamingMedia
Teeter
YouTube 2.6, etc..
Apps NOT included:
Google Maps
HTC Messaging Client
Menu Enhancement
Windows Live IM...
*Always do MTTY before flashing new rom to avoid getting weird problems.
Bugs List:
-
----------------------------------------------------------------------------
Changelog:
09-23-2010:
- upgraded to build 23138
- (upgraded) RSSHub_2_1_2_1117_01
----------------------------------------------------------------------------
Download Link
Mirror
Thanks to makeveral, l3v5y, ervius, etoy, programatix, yozgatg, Lobsterdave, Chrisd1a1, abrasive, Celoni, marchetto, joojoobee666, michyprima, xda-developers...
[ROM][WWE][Freya][WM 6.5.3 build 23134][Sense 2.5.2016]
With Sense 2.5.2016 enabled:
Dialer: BsB Black Dialer
IME: EZinput2.1
Themes: custom m.carroll PureBlack3, and Classic Blue
PagePool: 10
free RAM: 30-35 MB (at startup with Sense)/54 MB (Titanium)
Apps included:
Album 3.2
Arcsoft MMS
Audiobooster
cleanRam v2.3
Facebook
Marketplace
Office Mobile 2010
Opera Mobile 10
PHM Registry Editor v0.70
QuickGPS
Slide2Shutdown
StreamingMedia
Teeter
YouTube 2.6, etc..
Apps NOT included:
Google Maps
HTC Messaging Client
Menu Enhancement
Windows Live IM...
*Always do MTTY before flashing new rom to avoid getting weird problems.
Bugs List:
-
----------------------------------------------------------------------------
Changelog:
09-21-2010:
- changed default background wallpaper
- added RSSHub_2_1_2_1109_01
- cooked in GPS Hotfix
- (fixed) - backlight can now be set manually without restarting
- added Call History tab (Thanks to Etoy)
09-17-2010:
- updated cleanRAM to version 2.3
09-16-2010:
- implemented fix for "hanging at Welcome screen on first boot" issue
09-09-2010:
- scroll wheel now works on most apps
- added EzInput SIP Menu; to switch between compact, full qwerty or phone keypad
- switched to CMInternetSharing_1_1_5_1 and CommManager_2_9_11_0
- added LongPressEndKey_1_2_19183728_00
09-08-2010:
- added Arcsoft MMS
09-06-2010:
- fixed unable to dial from People tab
- updated to EzInput 2.1.19213624.00 (Thanks to rsw686)
09-05-2010:
- added Album 3.2 with facebook uploader (Thanks to programatix)
- fixed home tab background issue (setting animated wallpaper now works)
- removed HD Mini Lockscreen (now has the default WM6.5 lockscreen)
- updated a lot of EXT Packages
- fixed WiFi in settings tab redirecting to Bluetooth settings
- added Teeter
09-02-2010:
- fixed home tab background issue (setting weather wallpaper now works)
- added SMS Inbox Threading/Classic (Thanks to Makeveral)
09-01-2010:
- added Facebook v1.2
- added QuickGPS
- added StreamingMedia
- updated Calculator
- removed extra themes (now it only has BsB Black and Classic Blue)
- removed sample music
- fixed add recipient bug (Thanks to fredcezar)
08-30-2010:
- fixed Sense People message black screen issue
- fixed default WM 6.5 Lockscreen bug
----------------------------------------------------------------------------
Download Link
Thanks to makeveral, l3v5y, ervius, etoy, programatix, yozgatg, Lobsterdave, Chrisd1a1, abrasive, Celoni, marchetto, joojoobee666, michyprima, xda-developers...
very fast
congratulation!!
thanks!! try now
when active Sense there is not option for disable, beautiful graphic!
Thanks! This is my first cooked rom.
First of all, thank you very much for your work.
Only one question, you say 34MB at startup with Sense. What is the normal free ram after you use manila in a day or after some hours of normal use (more or less).
I am very interesting in Roms that the Ram don´t decrease in excess after hours of use (my problem is iGo navigator that always need 30Mb free to run properly with Gurjon skin). On the other hand, after hours of use always manila turn to be too heavy.
Nothing else.
Thanks and congratulations. I´m going to test this Rom.
rod555 said:
when active Sense there is not option for disable, beautiful graphic!
Click to expand...
Click to collapse
Checking what you mean on this. I have some programs that require a lot of RAM. On some ROMs I disable Sense when running these. Are you saying that you can't do this?
there are 2 "download link"
differences?
freya09 said:
Thanks! This is my first cooked rom.
Click to expand...
Click to collapse
how! great job!!
first of all, congratulate u on cooking the rom well hope to see update in the future
however, i want u to fix some problems :
1. whenever i wanna close the app, i tap the X button on the bottom right of the screen, but the app is still running and it's not closed yet
2. so, i logged to the settings to find the option named "X button settings" but there's nothing
3. the options which i was looking for in question 2 is often included in Task Manager, but your Task Manager is a little different... and therefore there's no tab for customizing the X button...
can u solve this and update soon??
nice rom..but can i do something to change the ugly volume bars but still keep the original wm incall volume?? n graphics are verry smooth!!
How can i change the Home Background?
PCPhil said:
Checking what you mean on this. I have some programs that require a lot of RAM. On some ROMs I disable Sense when running these. Are you saying that you can't do this?
Click to expand...
Click to collapse
Hi, you can still enable or disable sense via settings and home
fabius88 said:
there are 2 "download link"
differences?
Click to expand...
Click to collapse
Hi, the second one has HD Mini lockscreen VGA port installed.
SpeedyFlinky said:
How can i change the Home Background?
Click to expand...
Click to collapse
With Sense 2.5.2012 VGA port you can change the home background via Home Tab - Menu - Home Wallpaper - Weather wallpaper. But for the Sense 2.5.2016 VGA port it does not work anymore. You can change the Home Tab Wallpaper by using PHM Registry Editor:
1. Open PHM Registry Editor.
2. Go to HKEY_CURRENT_USER, then Software, and then HTC.
3. Select Manila and look for the entry HomeBackgroundPath at the bottom window and select it to open it.
4. Inside the Value data box enter the path of the wallpaper you want to use.
Ex. \Internal Storage\My Pictures\Diamond wallpapers\HTC HTD Mini.jpg
\Windows\HTC HTD Mini.jpg
5. Press Ok to save it.
6. Close PHM Registry Editor (Tools -> Exit)
meteorain08 said:
first of all, congratulate u on cooking the rom well hope to see update in the future
however, i want u to fix some problems :
1. whenever i wanna close the app, i tap the X button on the bottom right of the screen, but the app is still running and it's not closed yet
2. so, i logged to the settings to find the option named "X button settings" but there's nothing
3. the options which i was looking for in question 2 is often included in Task Manager, but your Task Manager is a little different... and therefore there's no tab for customizing the X button...
can u solve this and update soon??
Click to expand...
Click to collapse
Hi. Yes, that's the problem with build 6.5.x...when you tap the "X" on the bottom right in only minimizes the app. That's the reason why chefs who cook 6.5.x roms often include third-party apps like Arkswitch or eNatives Showcase. I was using Arkswitch with BsB rom. Same thing, if you want to customize the "X" button on a build 6.5.x rom you can use a third-party software called AMeBa.
sandokanito said:
First of all, thank you very much for your work.
Only one question, you say 34MB at startup with Sense. What is the normal free ram after you use manila in a day or after some hours of normal use (more or less).
I am very interesting in Roms that the Ram don´t decrease in excess after hours of use (my problem is iGo navigator that always need 30Mb free to run properly with Gurjon skin). On the other hand, after hours of use always manila turn to be too heavy.
Nothing else.
Thanks and congratulations. I´m going to test this Rom.
Click to expand...
Click to collapse
Based on my experience, free ram (with Sense running) after hours of normal use would go to as low as 11 - 15MB. Yes, running Sense on our Diamond indeed turns to be too heavy for the device. Sense is a RAM eater. You just have to disable Sense and go with Titanium when using apps like iGO...
imrock said:
nice rom..but can i do something to change the ugly volume bars but still keep the original wm incall volume?? n graphics are verry smooth!!
Click to expand...
Click to collapse
Hello. It's either the original WM volume control or HTC volume control. I believe you can not use both.
Can you say me, who can i find the backgroundwallper to make it at sense.
I meen the background that was in Titanum.
I am proud to present Need To Write!
It's a text editor unlimited by file sizes and offers a lot of customization and power tools
Completely FREE version can be downloaded here!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Difference between Paid and Free version is mainly in the poweruser options.
Paid version mainly adds lotsa poweruser options ;D
1) Remembers up to 9999 undo/redo operations
2) Control over the End-Of-Line characters (Apple, Unix and Windows tend to handle different End-Of-Line differently when doing plain text editing)
3) Allows user to specify buffer size
4) Allows custom fonts and background images
5) Allows user to customize 6 extra Themes in addition to the built-in 3 Themes.
6) Allows toggling of word wrap
7) Continuous Text to Speech.
8) Automatic backup of multiple files to user specified locations on SD card
Free version:
1) Remembers just 1 undo/redo operation, plus 1 reset buffer
2) Defaults to Android EOL handling
4) Fixed 10000 buffer size
5) Custom fonts and backgrounds disabled. You can still paint over the existing 3 themes with a solid color though, just adjust your Opacity bar in your themes dialog.
6) Customization of 3 built in Themes.
7) Always wordwrap
8) Text to Speech reads single paragraphs only.
9) Automatic backup of 1 file to user specified location on SD card
Version 1.71 features:
1) A File List, which works like a Bookshelf/Task_list/Recent_files hybrid management system. So basically, you can use it as a Task list, text bookreader, and text file editor as well.
2) Edit mode with unlimited file size, and tracking system to resume your reading/editing progress.
3) HTML mode! Supports non html files as well.
4) Text to Speech! I'm gonna use it to listening to ebooks when my eyes are tired
5) GoTo, Search, Replace, Cut, Copy, and Paste
6) Multiple Undo and Redo with undo history up to 9999(for the full version). Also comes with a sliding bar to easily rewind and fast forward the changes you made.
7) Themes! Customizable display; you can specify your own background images, custom fonts, background and font colors, line spacing, indents etc.
8) Landscape mode
9) EditText view with inertia scrolling, and yet no irritating problems of the view rectangle not being called to show your cursor, nor the rectangle jumping all over the place when you try to place your cursor far away.
10) Toggleable word wrap and autocapitalization (if supported by keyboard app)
11) Specify what End-Of-Line chars for saving your files with.
12) Tons of encoding options from ISO, windows 125_, Cyrillic, Japanese, Korean, Chinese, etc.
13) Share your files or just specific lines of selected text via email, bluetooth etc.
14) Automatic backup of files to user specified locations on SD card
15) HTML mode to easily switch between plain text and HTML view
If you like what you see, download now!
Oooops, double post
Latest version 1.3 is up!
Major changes are:
- Bookshelf/memo_list/recent_files hybrid system. So basically, you can use it as a memo list, bookreader, and text file editor as well.
- Fixed most of the pesky question marks by using windows-1252 as the default encoding.
- Added a lot of encoding options from ISO, windows 125_, Japanese, Korean, and Chinese.
- Themes! Customizable themes, and you can specify your own background images (Paid version only).
- Share your files via email/bluetooth etc.
- Built in file browser
- No more popup nag box! :s
Search and replace only works within the displayed text for now.
New version 1.35!
New features:
1) Toggleable word wrap
2) Specify which type of End-Of-Line chars to use when saving files, '\r', '\n', or '\r'+'\n'
3) Improved Find/Replace and GoTo function. Background no longer dims.
4) Stability fixes, some quite important ones. Make sure you update if you haven't yet!
That looks really nice for first program!
Im sure people will use this
Btw, how did you do this?
Tuhoaja said:
That looks really nice for first program!
Im sure people will use this
Btw, how did you do this?
Click to expand...
Click to collapse
With Eclipse IDE and Java, picking it up as I went along . Crux of the whole app is the proper loading and saving of file chunks, customizing the EditText behavior, and its backup system.
But actually not many people are downloading it
New version 1.40!
NTW now talks! Comes with ability to adjust pitch, speech rate, and supported languages.
But be warned, I think Android's Text to Speech is a bit buggy, so the voice doesn't really respond consistently to my controls for pitch and speech rate.
Edit: I found out it does respond consistently, but I have to be patient and wait for the next sentence to play naturally, instead of pressing stop and play for instant replay
v1.41 is out. It only patches NTW crashing due to certain Text to Speech settings. Download if you encounter this crashing.
why not put this awesome app in the market? I'm quite sure that all txt editors currently available do have size limit
a suggestion: it needs to support more codes like
UTF-8
UTF-16BE
UTF-16LE
UTF-32BE
UTF-32LE
WINDOWS-1251
WINDOWS-1252
WINDOWS-1253
WINDOWS-1255
SHIFT_JIS
ISO-2022-JP
ISO-2022-CN
ISO-2022-KR
ISO-8859-5
ISO-8859-7
ISO-8859-8
BIG5
GB18030
EUC-JP
EUC-KR
EUC-TW
IBM855
IBM866
KOI8-R
MACCYRILLIC
HZ-GB-2312
X-ISO-10646-UCS-4-3412
X-ISO-10646-UCS-4-2143
edit: oh i have found it. the market search system s*cks .typing the app name and not find in the start but middle of the list
It does already support many of the encodings you listed, including all 5 of the UTF encodings, most Windows 125*, ISO8859-*, EUC-JP, EUC-KR, Big5, Shift-JIS, variants of GBK, etc etc
However, it doesn't really do auto detection... Only autodetects UTF encodings provided that your file specifies the BOM bytes for it. For files without BOM or with BOM for the other encodings, you have to manually select its encoding from the list in Tools-->Themes-->Encoding
playerzking said:
why not put this awesome app in the market? I'm quite sure that all txt editors currently available do have size limit
a suggestion: it needs to support more codes like
UTF-8
UTF-16BE
UTF-16LE
UTF-32BE
UTF-32LE
WINDOWS-1251
WINDOWS-1252
WINDOWS-1253
WINDOWS-1255
SHIFT_JIS
ISO-2022-JP
ISO-2022-CN
ISO-2022-KR
ISO-8859-5
ISO-8859-7
ISO-8859-8
BIG5
GB18030
EUC-JP
EUC-KR
EUC-TW
IBM855
IBM866
KOI8-R
MACCYRILLIC
HZ-GB-2312
X-ISO-10646-UCS-4-3412
X-ISO-10646-UCS-4-2143
edit: oh i have found it. the market search system s*cks .typing the app name and not find in the start but middle of the list
Click to expand...
Click to collapse
Hmmm, this list of encodings look familar, are you the developer for Jota text editor?
http://android-apps.com/applications/tools/jota-text-editor/
I just found out that NTW crashes on startup on the Galaxy Ses owned by 2 of my mom's friends. They are typical users who experience lots of lag on their Galaxy S because they never tweak, optimize, root, upgrade to 2.2, or even use an external sdcard. Nevertheless, I am quite bemused why NTW crashes so consistently on their Galaxy S but not mine, considering that NTW does not require much system resources, nor the external sdcard to run.
I would be very grateful if any Galaxy S users would feedback to me if NTW regularly crash on their phones as well.
Ok, I think I've solved the crashing problem some of you may be experiencing. Hopefully anyway......
v1.42
- Patches NTW crashing due to your phone's Text to Speech settings or lack of TTS.
- More encodings: ISO-2022 for JP, KR & CN. KOI-8R for russian.
Heheheheh!!! Always wanted to implement multiple undo/redo, but only recently figured out how to do so efficiently
v1.45
- Multiple undo/redo! Undo History bar allows easy rewinding or fast forwarding of your changes, maxed at 9999 steps.
"Reset chunk" replaces the original Undo/Redo menu option.
Clicking of "Reset chunk" is recorded in Undo history.
Note: Free version has Undo history of only 1 in addition to "Reset chunk".
- Improved File Browser
- Streamlined File List interface.
Long press to view the preview, file properties, "Forget" and "Share" options.
NTW v1.47 is out!
Basically, this update makes the search, goTo, and undo/redo operations much easier than before. It also makes much better use of the space at the top which was previously just showing the filename and current %.
- Implemented fast scroll thumbs for browser and NTW shelf .
- Icon toolbar for convenient undo/redo, goTo, search, load next/prev chunk. Long click of undo/redo buttons pop up the undo history bar. Click the % display to shwo the goTo dialog.
- Improved goTo function.
NTW v1.48 is out!
- Fast scroll thumb for the main text box! (Built from scratch, whew! The behavior of ListView's fast scroll thumb was really tough to emulate properly )
- Progress bar above icon bar to show you where is your currently loaded chunk.
- Search backwards in addition to searching forwards. Plus some tweaks to search behavior
v1.49 is out!
This is mostly tweaking the behavior, performance and efficiency of undo/redo, search and replace, and the cursor.
- Fixed search backwards so that it works for single char searches too.
- Tweaks to UI of file browser and File List when adding/forgetting files
- Changed Replace operation so it is more compatible with undo/redo
- Fixed the auto shifting of cursor interfering with delete by holding down delete key
- Minor cursor tweaks and speed enhancement to File List
V1.51 is out!
New features:
- Incredibly cool Viking android as fast scroll icon!
- Even more incredibly cool menu icons!
- Delete command now available in file browser. This should be useful if you sometimes find yourself itching to do some file clean up from within NTW itself.
- Adjustments to left and right indent seekbar range and auto fadeout time of fast scroll icon.
- Self-fading pop up dialog boxes for messages like successful save, successful overwrite, or other error messages. I made the fadeout time for non-error related messages quite fast, but if you still find them irritating, let me know and I'll program in a check box to toggle their existence.
V1.52 is out!
Changes:
- File List now displays the file name only.
- Added shortcut to change "Encoding". Long press the main editing window to bring up the context menu, then select "Encoding Options".
- Ratings button, and my blog address added into Help
- Text cursor will no longer move along with the scrolling page.
- Tablet users should (hopefully) be able to find NTW in the Market now.
- NTW now supports only Android v 2.2 or higher. I think NTW was crashing for for v2.1.
I'm thinking I should probably move on to something else for now. Have an idea for an interesting variation of a file explorer....
I'll get back to NTW as and when I have time, maybe improve the search and replace or the GoTo % accuracy etc.
Hi,
why it is said "my device is not compatible"
when I try to install from market?
I 'm using Motorola MB525(defy)