Hey guys,
I unistalled TomTom that came with my P3300 so I could use iGo 2006 nav. software instead.
Because I removed Tomtom, my GPS hard key (1st on the left, lower line of keys) now doesnt work...
Is there any way I can map that key to use it with iGo?
Thanks
Miguel
Go to
Start
Settings
Buttons
Highlight button 1
Assign a program and set to IGO
It would also be a good time to start using a better app for buttons
I use AE Button Plus
It lets you set a button to do many different things
ie one press for Internet, 2 presses for wi-fi on/off etc
Thanks a lot.
will look into AE Button Plus...!
Cheers...
Related
Hi everybody
I assigne in my P3300 the internet explorer to screen rotation. In WM5 no Problem, but when i'm in Tomtom 6 if i press this key internet explorer was launch!!!!
How configure keys in tomtom? because i looking for a solution for rotate screen under tomtom.
Someone have idea.
THX
Rotate the screen before starting TomTom or revert to TomTom 5 that allows you to rotate the screen from TomTom
Hi,
I assigne in my P3300 the key internet explorer to BTAudio. In WM5 no problem, but when i'm in Tomtom 6.03 if i press this key internet explorer was launch!!!!
Looking for a solution.
Half Colin said:
Rotate the screen before starting TomTom or revert to TomTom 5 that allows you to rotate the screen from TomTom
Click to expand...
Click to collapse
That's not an solution.
BYM said:
That's not an solution.
Click to expand...
Click to collapse
Hmm - a solution to what - keys working through TomTom? ok this doesn't work so yes it's not a solution but if you want to run TomTom in landscape mode it does work so it is a solution!
Take your pick - I was just offering help.
Are you running any button mapping software? I'm using TT6.02, and have no issues doing exactly what you want - i use the IE button for screen rotation, and it works in TT, so it's not TT or the built in button mapping that's the issue.
I already map the IE button (rotation) but in tomtom 6 when I press the IE button internet explorer was opened. I just use for map button provide in WM5 (parameter/button).
In other application this mapping works well.
Same issue
Hi all i have exactly the same issue, not using any mapping software just the "buttons" menu inside settings. I can map the sat nav button to anything i like when i am running anything else but when in tomtom this button always loads the internet!
im trying to go between different applications so i cannot do what i require before entering tomtom. i also dont want to downgrade as the full tomtom6.2 was quite expensive...
I have just tried and using the O2 Orbit version and tom tom 6.01 it rotates the screen in tom tom and does NOT launch IE.
Just using the buttons settings program that came with the phone
I would like to know how to assign button 'OK' to another program just like porgrma 'mort player'.Pls advise me. Thank you in advance.
that makes two of us. anyone?
You can us AE Button Plus, this can map any key to any program
Can i change it vai register ?
AEButton plus does this for me.
The only problem is you cannot map both "Ok" buttons on the Hermes as it causes some strange behavior and locking up of buttons.
What I love about AEB is that all my buttons now have multiple uses.
My Mail button: single press = Mail app double press alt Tab to next application
IE Button: Single Voice Minder, Double Picsel Browser
Voice Dial: Single Voice Dial, Double VJ Flashlight
Front OK: Single Close App, Double Task Manager, Triple Oxios free ram
Comm Manager: Single Comm Manager, Double BandSwitch
etc etc
A little tricky to set up at first but well worth it in the end
http://ae.inc.ru/aebplus.php
Jules
My problem is only 'OK' button and the other buttons is alright !!!
Hi,
I use AEBPlus in my TP2 to change four physical button to run a application but can't get any success. Nothing is happened.
Is it possible to change home key to run a application in registry?
Thanks.
I'm having the same issue. I can "set" the back button in AEBplus, but no matter what I set it to, it will not work. For the Home button, all it does it go to the home screen (exiting AEBPlus) instead of allowing me to map it.
Any ideas?
Would love to see the ability to map single press/long press/ double press (single short-second long) to do different things.
Tried AEB Plus, it works, though not very well. The <-- (back) button does not work after adding in AEB Plus. But I can map the windows, and end keys. I kept 1 press untouched, and remapped 2-press, 3-press and long-press.
The trick to remapping the windows button is: press once 1st so it'll open the programs screen, then double/triple/long press after that. The timing to press is important...
Alright, so I've tried AEButton plus, and dug around here for 2 days and haven't been able to find a solution.
I'd like to remap the "Home" and "Back" hardware buttons on my T-Mo TP2 to Arrow Down (for the Home) and Ok/Select for the Back. Since neither of those functions are an "application" I don't see how that would work.
A friend of mine wrote an app for the ATT Fuze that allows the PTT button to be visible in the standard button mapping area, but I don't know what the scan codes are for the Home and the Back buttons are. Anyone have an idea?
Otherwise, I'd love an application that actually... you know ... worked.
AEBplus can map to key strokes. I have Volume Up mapped to the Up arrow and Volume Down mapped to down arrow.
So I think you just need to:
* Add Button in AEBPlus
* Press the appropraite hardware button
* Select the new hardware button and edit it (I think you hit enter while it is selected).
* Choose the action as a keypress of Up Arrow or whatever you want.
when I try to add the volume buttons as a remap I just get the volume changed... any solution for that?
When I attempt to remap the Home and Back buttons on my T-Mobile TP2, it fails to map them. I've tried everything.
Volume kind of works, but I want those ... for the volume
Ghallo said:
but I don't know what the scan codes are for the Home and the Back buttons are. Anyone have an idea?
Click to expand...
Click to collapse
I'm not totally sure what mean by scan codes, but are these them: http://ae.inc.ru/aebpluscline.php ?
Aebutton Plus no longer maps vol keys w stock 6.5
Someone else in this thread is reporting what I'm seeing -
Before the 6.5 upgrade, Aebutton plus would let me remap the volume keys to do nothing on single or double press, then execute the volume change on the third press. I liked this because I've always found that I tend to turn the volume off inadvertently - and not just on this phone.
Now, it won't do this, and I can't disable the single or double press.
I've tried it with simplemode set in registry (one volume control, vs. ring and system) in either setting.
Does anyone have an idea as to what they've changed? I'd really like to be able to put this back the way it was.
try to use the program on this link http://forum.xda-developers.com/showthread.php?t=554240. This is the one I am using right now to map my home key into start menu button.
Im having the same issue. I need something to remap my buttons in order to scroll up and down and open task manager. I have Sprint TP2 with the 6.5 update and tried AEB already, any solutions?
Howdy, i am looking for a way to add more button assignments in the list, currently i only have the call button, when held down it rotates screen, doesnt seem to be a method to add more thinghs, like hold down back key, home key and volume keys?
(end key brings up some menu for putting phone in plane mode etc (not really useful as can do that in comms manager / turn off phone on a plane. so changing that to a better assigment would also be neat cheers.
hello all.
using this post:
is it possible to assign other functions to the button off volume control?
for example: scrool up/down?
There are many programs out there that address this. Search for button mapper, assign button, remap, etc.
Some obvious ones are AEButton Plus, MobileMagic...