Anyone got the cab file for te latest comm manager black ??
After installing "walshieau CommManager 1.7.1.00.cab " the wifi could not be switched on anymore on my artemis.
there are several threads you can find http://forum.xda-developers.com/showthread.php?t=311448&highlight=CommManager+black
Thats what i was looking for
Thanks alot
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
FoRmaTiTo said:
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
Click to expand...
Click to collapse
Try This, it works on my 838Pro ...
Hi,
thanks a lot for this file. I get the same error message trying to install this one as with mun_rus one...
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
Any ideas what I could do?
Thanks!
FoRmaTiTo said:
I'm using the AUS WM6 no SPL found in this forum.
Click to expand...
Click to collapse
Maybe your ROM is lokked by default. So try a cooked version from this forum and it just works.
I've installed it on SEA version thanks for share.
I was able to install the comm manager hkkk888 posted. Thank you! I had to stop the comm manager trough task manager first.
Thanks again!
Now I'm only missing the dialpad(s) and I'll be a happy man...
Can anyone do a screen capture to show how this Comm Manager skin look like?
I would like to change the one on my Trinity WM6 too. Also, if anyone can show me a dialpad with video call button will be great.
look like this
http://www.mobile-review.com/pda/review/image/htc/elf/screens-official/scr05.png
The comm manager posted before dissapears after a soft reset and leaves me with a blue colored one...
The one I am posting stays after soft reset. Not sure, but the font on it looks more blurry...
DIAL
Dial Sceen?
ROM cookers/Devs
I understand from other threads that the issue with the dial pad is that the kaiser has 3g codecs that differ from the trinity/other htc devices, which means the 3g video call button on this dial pad does not work.
My question to you guys is; how easy/hard would it be to change the dial pad so that the action/function call behind the 3g video call button doesn't call the 3g codec/action we don't have but calls the video call function that we know we can use...?
Regards,
different dialpad from wm5?
If wm5 dialpad should work on wm6 you can try one from Hermes, works for me in wm5.
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
ztuzz said:
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
Click to expand...
Click to collapse
Guys, Whoever face this problem, just restart your device and do not start any program before installing this comm manager. The reason you get this error because, your existing comm manager is running and this file cant overwrite the running file.
hkkk888 said:
Try This, it works on my 838Pro ...
Click to expand...
Click to collapse
The WLAN keys are different for 838 pro and Trinity and so for other HTC devices. The Comm Manager for Hermes will definitely NOT work for Trinity (For WLAN and Data Connection)
I don´t know about data connection, but the WLAN button DOES turn the Wifi function on and off on my device.
Still looking for the dialpad
The AUSDIM "modified official rom" does have the dialpad/comm manager I want... I´ve sent him a P.M. asking if he could share them but no luck yet...
Maybe he can/will post them...
Thanks!
There you go...
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
FoRmaTiTo said:
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
Click to expand...
Click to collapse
Wrong. Here is a nice black dialpad - finger operable - I believe it ma be the one in AUSDIM's ROM - but it has no Video Call support - the only downside. It does update the pinpad entry, too. It says Wizard - but I have it installed on my trinity - works fine.
nealed, thanks. It's great, more finger friendly than other dialpads.
I just updated my HTC tYtN to that version and it seems to me that the com manager bg color still remains purple i was just wondering if theres a way to fix that and make it back to the original black htc com manager bg.
thanks guys, cheers.
Theres already a thread for Schap's 3.54:
http://forum.xda-developers.com/showthread.php?t=318849
No need to open a new one
Read This
http://forum.xda-developers.com/showthread.php?t=320239&page=6
http://forum.xda-developers.com/showpost.php?p=1408271&postcount=59
'Uninstalling' Schap's 4.30 Comm Manager for "Schap's 12-button Comm Manager"
Hi all,
Not posted on the forums for ages; decided to upgrade to Schap's WM6 Pro 4.30 ROM yesterday- all seems fine so far.
I noticed that the Active Sync icon is missing in the 4.30 ROM Comm Manager. So I decided to installed the Schap's 12-button Comm Manager cab file. Seems to install fine but when I go Comm Manager, it looks like the previous layout is still there and the new one is literally sitting on top of it.
My question, how can I remove the original Comm Manager cab install?
Many thanks.
Have you tried stopping the comm manager using task manager, and then installing the comm manager u want? Sometimes that can be the problem!
Why not read and post in the Schaps 4.30 thread like everybody else?
jompao said:
Why not read and post in the Schaps 4.30 thread like everybody else?
Click to expand...
Click to collapse
I keep that in mind for next time.
but in this thread you can find the solution....
go in advanced config and change or configure yours.
Obewone said:
but in this thread you can find the solution....
go in advanced config and change or configure yours.
Click to expand...
Click to collapse
Thanks, I ended up finding out this.
sh500 said:
Hi all,
Not posted on the forums for ages; decided to upgrade to Schap's WM6 Pro 4.30 ROM yesterday- all seems fine so far.
I noticed that the Active Sync icon is missing in the 4.30 ROM Comm Manager. So I decided to installed the Schap's 12-button Comm Manager cab file. Seems to install fine but when I go Comm Manager, it looks like the previous layout is still there and the new one is literally sitting on top of it.
My question, how can I remove the original Comm Manager cab install?
Many thanks.
Click to expand...
Click to collapse
I think that your comm manager is not on the top of previous, but there is a problem with a comm manager in one style, i think its the on/off style. Try changing it in AdvanceConfig->Comm manager, set it to Default style!
Mixa84 said:
I think that your comm manager is not on the top of previous, but there is a problem with a comm manager in one style, i think its the on/off style. Try changing it in AdvanceConfig->Comm manager, set it to Default style!
Click to expand...
Click to collapse
Yes, that is what I ended up changing.
Thanks.
hello everyone
i just installed new wm 6.5 custom rom,
in the start menu i am seeing 2 same icons for e.g Comm Manager, and second Comm Manager 1, i have 3 icons like that and i dont like that..
does anyone know how to deleate them form start menu so i just see only one icon of Comm manager.??
any advice/comment would be very helpful
thanks
YoBRO said:
hello everyone
i just installed new wm 6.5 custom rom,
in the start menu i am seeing 2 same icons for e.g Comm Manager, and second Comm Manager 1, i have 3 icons like that and i dont like that..
does anyone know how to deleate them form start menu so i just see only one icon of Comm manager.??
any advice/comment would be very helpful
thanks
Click to expand...
Click to collapse
open file manager and go to device/windows/startmenu/programs and delete what you dont want
Ok, this works almost perfect for me! Could you also tell us how to change the icon of a folder? Thanks a lot,
Niekie
There is a nice app called reStart that you could use.