Help ?! Calling problems! - MDA III, XDA III, PDA2k, 9090 General

Hello.
Can anybody help, or suggest something ?
Situation.
Have a XDA III 02 branded (PH20B1), WM 6, Radio 1.15.
Tha device is working perfect but:
calling problems: i can make and receive a call, i can hear the person called perfect, but the person I call can't hear anything, better case something like an old vinyl sound, but can't understand any of my words!
Ideas ?
Thanks a lot!

what ROM do you use? 2003? try to find the unidirectional patch at the wiki!
if the problem stays... just simply to upgrade to WM5 or 6...
good luck
adri

Thanks adri, but
as I said, I already have WM6 and Radio 1.15 on the BA.
Do I need an extra patch ?
At least anyone can tell if is a software problem, or hardware ?
I can hear perfect the person called/calling me.
Thanks!

Related

Jabra BT800 fix, MAYBE

Try this???? Came with my new I-Mate PDA2 extended rom.
This may only work on the Alpine and it may mess up your Himalaya or any other device...
USE AT YOUR OWN RISK AND DO NOT COME *****IN TO ME IF YOU BREAK YOUR PHONE! :twisted: :evil: :shock:
I installed this thinking that maybe it would show the NAMES on the Caller ID display.
Instead, now it doesn't show ANYTHING - Not even the number.
I have a Blue Angel device, if that helps.
Thanks,
IceCream
bt800
If you are geting caller ID only on your device, consider your self lucky. You need no fix.
On the Himalaya, you need 2.20 and Hands Free mode just to make it work a little! :twisted:
Names will never be displayed unless Jabra updates the firmware.
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
On the Blue Angle, is it a MS stack or Broadcomm?
If MS, the update fix will not work. If Broadcomm, it may.. The I-mate pda2 uses Broadcomm.
If you have MS stack, you need to pair in Hands Free mode. Headset mode will not work, it will give you a LONG delay befor it answers and NO caller ID.
On the Himalaya, the BT800 only works under the 2.20 Translated ROM.. NOT 2.02 or 2.06. On the 2005, it works fine.
However, I have not tried the "fix" from I-mate for the PDA2 on the 2.20 or 2.06 or 2.02. The 2.02 or 2.06 will never work because the Hands Free Profile does not work right. The mic does not work with 2.02 or 2.06 and it has a stero affect from the speaker and mic still working on the phone.. (only sound on the device of the BT800 or any other device)
icecreamguys said:
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
Click to expand...
Click to collapse
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
Click to expand...
Click to collapse
Yes, I did.
Thanks,
IceCream
Hi guys!
As wrote before in many other threads....caller id function in my Jabra 800 works as you described (only number but not name). Truthfully I can live without it....but the main problem is that it takes about 4 or 5 times to press answering button before I can hear my opponent. Also it takes about 2 seconds to conect.
That's really my biggest problem.
So, I wonder if this fix file can help me.
I have Qtek 9090 with Dangard rom 1.40.147 and 1.12 radio (bt 3900).
Please help, cause don't want to litter my PDA with unnecessary fix cabs.
Many thanks.
Leo.
As with all testing, use sprite back up or sunnysoft back up before you try anything. If it does not work, REWIND!!! :lol: :lol: :lol: 8)
Same situation here.
Repeat: use Qtek 9090 with Dangaard ROM 1.40.157
BT 3900, Jabra BT 800. Used this cab. Nothing broked. :lol:
But, now answering option works fine, exept - I can't here number on the BT device :lol:
Really cool :lol:
So, best way to wait for new cab fix, which will help to see number on the Jabra's screen.
:lol:
Anyway thanks.
You are MAN!
Sorry, tested little bit more and found out that Fix cab didn't help.
Now also I can't here numbers. :evil:
Anyway, today I'm going to reflash PDA with new ROM.
Hope that Jabra customer service will actually help us.
:?

M2000

Sorry to annoy everybody, I have had my M2000 a while now and there are a few things I would like a hand with.
1) I unlocked the M2000 and am currently using it on O2 pay and go. However I cannot use GPRS, if anybody could help me out by telling me settings and/or how to connect properly I would be very grateful!
2) I am running Windows Mobile SE Version 4.21.1088 (build 14132) are there any upgrades possible at all to be able to use Windows Media Player 10? I don’t mind upgrading operating system as long as it doesn’t cost too much.
3) Is there a way to back up just my text messages from the M2000 so I can have them saved on my computer and/or my 1 GB SD card?
4) Finally (sorry about this) does anybody know why sometimes when I make calls I can’t hear the dial or the person talking but they can hear me? I have checked the volume (I'm not that dumb) but resetting it is the only thing that works, which is pretty annoying.
Thank you very much for your help. I know there are probably a million listings with these answers but if you could direct me to them or give me your own verdict I would very much appreciate it.
Thanks again.
1. do a search in the forum maybe excluded to the networking it forum
search string should be something along these lines "gprs AND payandgo"
or something like that
2
read this
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
3. again search for something like "SMS AND backup"
Thanks for that Rudegar, if anybody else can help me out on this one too, I would really appreciate it. You gave me a link to download WM5, are you currently using WM5, and would you recommend it? I have no programming experience really and it looks quite complicated to install so much so I don’t know what some of the files are etc. will there be an easier version where all you have to do is click a button and it will auto install? You’re the clever one here so ill do whatever you recommend, ill take your word for it. Thanks again Rudegar, if anybody else can help please do.
Thank you.
I have had my M2000 for about 2 months and for about the last month i have also been have the same problem as number 4, where people i call can hear me but i cant hear them, when i fiddle with the volume slider on the side i can sometimes (only sometimes) hear a split second of sound from the other person, its SO annoying having to reset
could be a radiostack issue
maybe an upgrade of it will fix it
also had some issues with my xda2 when people call it sometimes take awhile before they can hear me
the cause of that is bluetooth tools which seem to be trying to direct my call to my bluetooth headset
dont matter if i have a bluetooth headset though it still try take about 10sec before they hear me then
Hmmm, glad to hear I'm not the only one with that problem. It is really annoying though having to reset it when i need to make a call. I'm worried about using a radio update as I don't have a clue about who has made it and what it will do especially if its a con. Where can i go about getting a trusted Radio update? Talking about updates, is there a ROM update available?
Guys install this cab file it will fix your problem..
Or while you don't hear the other party just turn on the BT then turn it back OFF this will solve..
read these pages
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
there you get all you need to know about upgrades of all kind
I have taken a huge risk in installing WM5... Well I'm doing my best anyway. I need some help though.
I have so far got to re-partitioning and formatting my device but whenever I press format an error message comes up saying "Error FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" what the heck does that mean? can anybody help me out?
Big thanks to everybody who has helped me out so far with this and for anybody elce if you can help me, please do.
Thanks.
Anyone know if it is possible to remove a cab file like this after I have installed it? I've loaded it and it seems to have screwed up my pocket pc.
Thanks,
Cian
PHEW!!
I'm so glad i didn't install that cab. I was weary to start with and I'm glad i didn't it appears to be some sort of intruder on a pocket PC which jumbles up the settings. Just for anybody elce who is about to download it, take some advice, DONT PLEASE!!! I'm trying to upgrade my ROM but orange are crappy and dont supply ROM updates yet. Ill try the I-Mate Update. Fingers crossed. Thanks again to everybody who's helped me out!

Phone problem - neither myself or caller can hear anything

Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...

BT (mono) headset sound quality issue

Hey everyone,
i've noticed, that this has been discussed before, but i've found only a thread in the kaiser forums and there seems to be no solution for this:
I'm using a plantronics discovery 665 headset with the Artemis on meschle's touch rom 3.01 and the sound quality (especially for the those I've called) is really bad. They always say, that they hardly hear me. In the kaiser forums they say it's possibly a hardware issue, or that it has something to do with bt 2.0. I was using a plantronics explorer 350 headset before with the original wm5 ROM and it worked just fine. I tried the new headset yesterday with a 'normal' nokia cell phone and the quality was excellent. So it's neither a problem with the headset, nor a problem with the Artemis itself (I think).
I played a bit with schap's advanced configuration tool to change the sample rate, using joint stereo or not, changing bit pool size, but nothing seems to make a difference. I don't want to downgrade to an older ROM (or the original one) because I think meschle's ROM is just great! And I don't even know, if it would help ('cause now I have only the WM6 version of the original ROM, and maybe it's a WM6 problem?!).
If someone has any experience with this issue, knows if an other ROM will do the trick, or have a solution for this problem, that would be great!
WM5, the better software?
ok guys,
as nobody seemed to have an answer or a similar problem, i've tested all ROMs i could find, and the last one, the oldest one, the original WM5 ROM worked for me/my headset. the quality now is as good as it should be! it's frustrating to use this again after using meschles ROM extensivly, but it's still a phone and every now and then i want to use it's phone-function as well!
maybe someone has an explanation for this?! is it really a WM6 issue? (the original ROM WM6 didn't work either)
WM6?
kb1313 said:
ok guys,
as nobody seemed to have an answer or a similar problem, i've tested all ROMs i could find, and the last one, the oldest one, the original WM5 ROM worked for me/my headset. the quality now is as good as it should be! it's frustrating to use this again after using meschles ROM extensivly, but it's still a phone and every now and then i want to use it's phone-function as well!
maybe someone has an explanation for this?! is it really a WM6 issue? (the original ROM WM6 didn't work either)
Click to expand...
Click to collapse
I'm also thinking it's a WM6 issues. No problems b4 I upgrade to Meschele's Touch 2.1. Btw Touch 2.1 works great!!!

Imate Jaq3 Rom needed

Hi, I am Lucas from Argentina. I have an Imate Jaq3 and since some time ago, I am having an issue. When I am talking to someone, I hear without problems, but the other person hears a terrible noise coming from my phone (as a buzzing noise). I tried replacing the microphone but that did not solve my problem.
Reading some pages, I realized that a rom upgrade may help me or maybe it just could solve the entire problem.
So now, does anybody have an idea of where could I found any rom for this phone? doesn't matter if wm5 o wm6 rom, I just want to use my phone without that buzzing noise!
Sorry for my english, I am spanish
thanks in advance for your help, regards from Bs As Argentina
Lucas
Wrong forum
Hola Lucas, welcome to forums
As we dedicate here only to HTC devices so you won´t get too much attention.
Better try here:
http://www.totalpda.co.uk/forum/i-mate/

Categories

Resources