I have a UK M5000 and updated the ROM to the new Orange ROM without problem. It was still slow so I plunged for the upgarde to the Dopod ROM. Since I did this it crashes all the time. Sometimes I can reset it sometimes I have to take the battery off. After a bit it won't even boot at all!
Despite all this I am always able to get to bootloader and reflash it. I have since tried the QTEK ROM and even back to the Orange ROM but now it still is unstable. Is there any known reason for this that I can try.
PS tried task format commands and mtty stuff as most of the time after a crash it sticks at the splash screen in all ROMs.
PPS IT NEVER did any of this before even after the first Orange ROM upgrade.
ANy help much appreciated.
Thanks
James
Not sure if you've cured this by now but I am a UK Orange user with SPV M5000 and went ahead with Dopod upgrade wihout any problems.
Presume you tried Hard Resetting, formatting card etc?
I have the same problem... It starts 2 days ago... Its terrible!
I have T-mobile. Now i flashing with original T-mobile ROM and i hope that everything will be ok.
If anybody knows whats happend???
I thought that the problem is on hardware...
30 minutes ago i flashed with latest I-mate ROM and when after flashing i do hard reset nothing happend. I see black screen and thats all!!!
Yes! With T-mobile ROM it seems to be ok. Now i try to flash with I-mate ROM again.
May be the problem is in the "MaUpgradeUt_noID.exe"?...
MaUpgradeUt_noID.exe
I find out that there are some issues with this file. Is this the same file we used to use during upgrade/change language??? If yes, than why when I tried to dawnload from the buzz web side i find that there said that the file is 365kb but when you dawnload the file is 165 and that is why some people are having problems when upgrade their rom or change operators/languages.
So if I want to change language it sais that you shoul run MaUpgradeUt_noID.exe and than I see in the picture of Magician. Is this NORMAL and should I go forward or WHAT.
Flashing with T-mobile original ROM didn't resolve the problem...
It's still bad...
What the hell is going on with my Universal???
I tried to disable BatteryStatus(from today), and after some SR its still GOOD!!!
PROBLEM SOLVED
"Hello,
I have a lot of hours behind me, because of working on my problem.
I did not found any solution, but i would like to share my experiences...
Symptom:
After some soft reset the pda can't boot. B&B v4.0 os loader image could be seen...
I tried install my programs in a lot of variation, but after some soft reset, the system fails while booting...
I dont know what is the cause of the problem.
Tried flash with art_htcwwe_11240501_026790_wwe_ship, after uspl, flash with 4.0. Same.
Tried to take the device into boot loader, change the splash screen, it hepled once. After the next SR same problem.
I have HTC Artemis (from HTC, not from any distributor)
Some ppl have written for me, they are fighting with our problem, please write here...
thx"
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
yes, i used bb 3.7 before too...
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
dzign-it said:
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
Click to expand...
Click to collapse
I tried without any change of BatteryStatus settings...
xmas said:
I tried without any change of BatteryStatus settings...
Click to expand...
Click to collapse
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
zsitvayb said:
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
Click to expand...
Click to collapse
Downloaded again. The size of the file from an other mirror is the same.
off
Jah, lehet ezt nem töröm annyira , Bájtra pontosan ugyanakkora, de az önkitömörítős exe amúgy sem indulna, ha hibás lenne a mérete.
on
similar problem
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
maxi_boy said:
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
Click to expand...
Click to collapse
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
I have the same problem.
First time was after plugging in my SD card to install tom tom.
2nd time was after uninstalling the 3.7 boot dialer.
A reflash fixes this but obviously it would be better if there was a proper fix which did not brick my phone each time I add an app!
the issue might be with time/date settings
maxi_boy said:
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
Click to expand...
Click to collapse
i've just tried not to change time/date settings and everything works fine...
Yesterday, it happens to me too.
But with a hard-reset I've solved the problem.
I think I've got the cpu scaler with the turbo boost on.
Same here...
Hard reset brings the phone back to life. But when doing a install of an app and doing a Soft Reset he dies again...
Makes the ROM as good as useless for me.
I'll try a reflash and see what happens.
Today another time.
I've ran sprite backup and when the artemis reboots to make the backup the tomtom installer has beguin to reinstall itself. The backup has been interrupted and has made a soft-reseft. Them I sohuold to hard reset.
today I hanvent the boost option, only cpuscaler was on.
This is mostly due to the kaiser home plugin - it does not like to be hurried on boot. So no overclocking on boot - so untick remember last cpuspeed and overclock after reboot and do not use traylaunch part of bs - also causes lockup. Works on my rom.
But I've reporduced the problem without overclocking...
I think it's not an overclock problem.
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
I have also over clock, pc synch and exchange synch. I also had to re-flash. however, seems that it works very well if I flash HTC boot image after B&B4 before any other apps. now,I have BB4, HTC boot screen and all apps I like, and ... have SRed many times
ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
,
The splash screen couldnt be the reason for crashing.
(i think there is a chance to brick again after some soft reset)
Same thing happen to me
Same thing happen to me, after instal everything on my device, after couple of softresets (becouse of installs) i though that eyerything is ok. But when i was trying to change biotouch setting, and then soft reset the device it didn't boot enymore. That's one bug in tom's rom that i have found, only one, but irritating. I think that biotouch setting was the reason of lockup aftersoft reset, hopefully i have full backup before this change, so i make hardreset and restore everything
Hi Guys,
I have been playing around with versions of BB and WM and now I think I have crashed it! The last version installed was 3.7, and it was switching on, but now when I did a re-set, the HTC Screen loaded, but the phone has been stuck on the Windows Mobile Screen for the last hour (I have tried loading without the SD card as the last thing I did was to install TomTom). Obviously I have no ActiveSync connection therefore i cannot flash the rom to the official WM6 Uprade.
Any ideas what todo now!.
Thanks
Hello over there,
I had the same problem with B&B 4. I think you have to hardreset your phone.
Hi, Thanks for the Reply, I just got the XDA so not quite sure how to do the Hardreset! Cheers
I managed to find it! but its still not working! its just the same as before!
it took a few trys but all ok now!!! thanks!
I have this problem too
I have this problem too,
WM6 Dopod P800w offiicial rom
Is stuck on Welcome screen WM screen, i had already HR for three times. for this problem
Very mad...
Hi everyone!
I'm Ray from Portugal, greetings to you all
I've been trying to upgrade my HX4700 to WM6 (using several methods) Kozhura edition but every time I upgrade and do a hard reset I get stuck on the "clering data" screen
I used the method explained on the readme.txt and the boot loader method.
I upgraded from WM5 standard version
I managed to revert to the WM5 standard and It worked, then I tried it again and the same problem occured.
After that~I reverted directly to the AKU 352 WM5 version from Kozhura and it also worked (I am using it now)
The problem is only with WM6...
Any thoughts on this?
Thnx
Ray
How long have you waited at the clearing data screen, its taken mine a few minutes easily and I have sometimes wondered if it would ever finish. I have also found that doing a hard reset with the stylus first and then doing the clear data works much better. Also which version of the WM6, fix 3 or the new ver 4?
probably took some minutes, 5 at most..
what do you mean doing a hard reset with the stylus and then clear the data? you do a hard reset without clearing the data (itask button) and then a another hard reset and choosing to clear the data (calendar button)?
I used release 4
wm6 not start
HI!
did you have found how to solve this problem is have the same condition that you have an can not found how to fix it.
thanks!
raybanana said:
Hi everyone!
I'm Ray from Portugal, greetings to you all
I've been trying to upgrade my HX4700 to WM6 (using several methods) Kozhura edition but every time I upgrade and do a hard reset I get stuck on the "clering data" screen
I used the method explained on the readme.txt and the boot loader method.
I upgraded from WM5 standard version
I managed to revert to the WM5 standard and It worked, then I tried it again and the same problem occured.
After that~I reverted directly to the AKU 352 WM5 version from Kozhura and it also worked (I am using it now)
The problem is only with WM6...
Any thoughts on this?
Thnx
Ray
Click to expand...
Click to collapse
Hello,
Today i wanted to try the new 3volution rom for the s620 when i got an annoying bug
I spent most of the afternoon looking for an answer but found none.
Everything works well in the beginning until i got to push the center button for the screen to turn white. It turns white indeed but then activesync desynchronizes and doesnt resync anymore, so im unable to upgrade (either it stops at 3% or with kavana's doesnt detect old rom) and in some cases it says the new flash rom is corrupt..
Its like my 5th flash, and prior to today i never had a problem flashing and upgrading
So i tried reinstalling activesync multiple times, changing cables, even hard resetting my s620 (i got the nrg rose 1.7 rom on it), i even restored my comp on a previous state.. nothing
It just keeps breaking the sync when i push the center button and doesnt resync for the rest of the procedure
If someone has an idea im all ears ^^ and sorry it it has been already posted
Welcome to forums
Try a hard reset or reinstall ROM
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=537151
Hope it helped,
redownload the rom. then read this http://forum.xda-developers.com/showthread.php?t=493266
3% freeze up it very common
I am seing something similar. If I set my device down without locking it the screen goes completely white. When I first loaded the rom it didnt do it for about a week and now it does it everytime. The only changes I've made since loading the rom is that I installed Google Maps and TCPMP.
Hmm its very weird, i did the hard reset.. well it didnt work..
The 3% error i got that only once
I tried installing the official htc 6.1 windows mobile rom and got the error 244 ...
and same as always, the moment the screen turns white it disconnects from activesync and doesnt reconnect. Imho XP needs reinstalling..
So my theories so far are: activesync is buggy to the core. Ill try flashing on my laptop as soon as i get to it.
Also one thing ive noticed: in all my previous flashes i had the original htc battery.. now i got an extreme energy battery with a blue and white sticker, ill try replacing the original battery before reflashing.
As i said in my first post, this is not my first flash, and i have flashed before to kavana's then rose then kavana's again and it always went smooth.
I have been using the S620 for like one year and a half and never had a prob.
Its an htc version and it was not locked; anyway in belgium locked phones are forbidden to sale
Greetings from the land of the beer and thanks to the developpers
Which Bootloader are u using ?
The official shipped one or the modified one ?
Hmm good question, where can i see the version ? When it boots up i see the nrg rose 1.7 black screen with white writings.
Another weird thing: my keyboard is azerty, so prior to hard reset i had a language pack for french keyb, after the hard reset my keyb works just fine without any language pack installed ... not that it is a problem but i just dont understand ^^