I'm sure there was a thread on that, but I can't find it by all keywords I tried.
So I installed CE-Star (again) and have immediately lost my contact suggestions when I write a new SMS. (Those are when you type first few name letters in the contact field; I can still press Enter and do that in Contacts itself.)
The font when composing SMS has also changed to something CE-Star must have installed. That's not so irritating though - I can live with it.
And I think I've seen exactly the first issue discussed here and solved by a simple registry fix... So how to get my contact suggestions back?
Related
I receive messages, the inbox show a number of messages between brackets, but when I open it is empty, it does not show any messages. Anybody got a clue why? :?:
Duplicate issue needs help
I am having the same issue. I have the ATT fuze, however this is my third one. The first one was perfect until there was a party foul that took it away. The second one had a typing issue so I replaced it. This third one is doing the same as the above poster mentioned. My today screen will show that I have text messages waiting to be opened but when I navigate to the folder there is nothing in it. Performed a hard-reset but the same thing happened. Installed third party software and now I can view the messages and reply. I am not happy with this "bandaid" but it will temporarily do till this can be resolved. Please help.
ROM version: 1.95.502.5 WWE
ROM date: 10/20/08
there may be something wrong with your storage card
the storage card can, by any means, have nothing to do with it. i personally never had such a problem, so i can just guess:
sample situation:
- i receive an sms, i see a notification, with the sender and the first few words.
- instead of clicking read, i press the hardware mail button to open messaging and read the sms
- while having it opened, i delete it.
- i go back to home screen and there is still a message and a notification
now i have confused my phone showing me new messages, although i already read and deleted them.
that is the only way i could think of to even get in that situation.
btw. that is the same thing with missed calls. if i have a notification of a missed call and instead of clicking the notification i open the phone manually and look whose call i missed, i will still have the message on home screen, telling me, there was a call i didn't know about, although i already checked.
please make sure that the description above is not the case.
because that is a general bug/user mistake, since the notification service is not fully integrated in pocket outlook, sometimes it gives out older data if you bypassed it to get to your information. that is normal. next time you get a message, try clicking the notification and click read or save as read, and look what consequences that has in your messaging folder.
if then still there is no message to be found, right after you read it once, it is still probably an error in the communication between notification service and pocket outlook, but then it is not your fault anymore you'd probably have to flash another rom then,
OR
it is something completely different and you need to contact your carrier, that receiving sms doesn't work out for you, that either you get a new sim or other network settings need to be changed.
my solution
I made some changes using advance config and changed portrait and landscape mode to cleartype. the fuze does not work with cleartype in landscape mode. Turn that off and it begins to work.
Text Messages not displayed
I know this is a very old thread but did anyone come out with a solution.
I'm still using my Blue Angel and it's come up with this problem.
I think it was after I received an MMS message (the first I received).
Hi all,
I have LVSW WM6 and I can create NEW email and send it using Pocket Outlook. However, if I want to send an email via "reply", I kept on getting a message that says:
The message could not be sent. Check that you have network coverage and that you account information is correct. Then try sending again.
I have good 3G coverage and can browse the Internet via PIE or Netfront. I have enabled POP in my GMail account.
Is there a particular POP setting that I must configure in WM6 for sending replied email via GMail?
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
Couple days ago? Did you made any changes to the device before this happened?
I wonder if this is caused by GMail and have nothing to do with WM6...
hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
I had the same problem, and the solution i found is the following:
When you press the reply button you find: "Edit the sender's message" underlined.
click on it and the original sender's message will open fully
Now you can write your reply and send it well
Thanks a lot pasil.pt it seems to be the solution!!!
I had very same issue. Using gmail on Treo800/winmo 6.1, I get a message that refuses to send. Once stuck in outbox, nothing will send unless I remove it. Every time this happened I saved the offensive msg and now I have 7 of them. When I retry send any, each one fails. These are the facts for my case:
1) It happens on some messages.
2) Happens when replying or forwarding.
3) If I delete the content, the msg sends fine. At least, I can rule out problems with msg properties and header.
One thing I noticed when comparing native PO to FlexMail, is FM defaults to indenting the original msg using '>' character. PO does not. Since FM can send all these 7 msgs fine, I thought this should be good start to investigate.
So I grabbed one of the bad msgs and I indented it manually line by line and to my surprise, It sent successfully. I repeated this with each of the 7 msgs and all sent just fine.
PO does not have a UI control to toggle the 'indentbody' and 'indent character' features, but I did see there are some registry keys related. However, I could not get these keys to work.
HKCU/sofware/microsoft/inbox/settings
--> AddLeading
--> IndentBody
--> LeadChar
I can not get my changes to stick and not sure how to enter a 'dword' value for the above.
Can someone please help me find out...
- steps in changing above values and make them effective
- how to enable body indenting, make e.g. '>' the leading char using dword values.
I could not find a tweak tool to do this as well.
Any assistance will be highly appreciated.
Same issue. Very frustrating. After reading last, i tried deleting the original text (below but not including the header) and the message sent fine.
hello there, I have some stuff I'd like to change regarding SMS. I've got a P3300 with official WM6.
I'd prefer to change this through some options (tho I didn't find) or registry edit. If possible to do what I need without installing more (battery draining) applications, would be best, but if there is no other choice, I'll take a look at whatever application u suggest.
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
is there any FAQ of different kind of tweaks that can be done with a P3300 wm6 just through options or registry? if yes, could you please link it, I'd like to take a look at that.
thx for everything
zandadoum said:
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
Click to expand...
Click to collapse
sorry, no idea on this.
zandadoum said:
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
Click to expand...
Click to collapse
There is a tweak for this. Search and you will find it or else, i will try to find it 4 you this weekend.
zandadoum said:
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
Click to expand...
Click to collapse
Yes, this question has been answered be4 too. Search and you will find it or else, i will try to find it 4 you this weekend. I thought its possible...
hopefully you can find that info and give me a hand. i tried the forum search function but as i dont know exactly what i am looking for, my search is too generic and i get loads of results (most about tweaked roms) that don't help me at all.
EDIT: found answer to 3) by myself. SOLUTION: open messages, go into menu->tools->options and there you can setup the different types of message accounts you have. at the bottom is an option to enable or disable the account selector. i just turned that off.
For the SMS sent notification:
HKEY_LOCAL_MACHINE/Software/Microsoft/Inbox/Settings/SMSNoSentMsg and set it to "1".
With the mentioned registry edit, you are not notified if the message fails to send. It just tries it, and puts it in sent items. If it fails it will not be re-send again by WM6.
you can fix the SMS/OUTLOOK/MMS thing in Options in your Messaging program.
ok, thx to that registry edit i get the sms sent popup no more. but i don't get any popup warning if it fails.
i've heard something about a different regedit key, with different numbers like
0 = no warn
1 = all warns
2 = only bla bla bla warn
3 = only ble ble ble warn
etc.
any1 got an idea about this?
also, any way to have the phone re-send failed sms automaticaly when i have signal again?
i am at a point that i would also try some SOFTWARE if needed, tho i prefer if it can be done just by registry.
Not familiar with those options. But why don't you give it a try and report back here.
GL
Hi,
I don't like the treaded sms and also the fact that If I have a message from an unknown number, the same number is listed as a part of the Pocket CM contact list. Is there a workaround to this problems.
I don't want threaded messages and listing of messages phone number in my contact list.
Help
For disabling sms Threading see here:
http://forum.xda-developers.com/showthread.php?t=372263
The second part i don't understand sorry.
Cheers
...or settings in Advance Tool Settings
Let me explain the second problem.
I received a message (maybe promotional message) from an unknown sender (someone who is not part of my contact list). Once I have received this message and its part of my message inbox. Now this number from where I have received the message is listed in my contact list with a number of messages received in the contact list. This is one feature that i don't want.
Here something
Thing ab this *.cabs
Thanks to Meshle! Be strong Brother!
Thanks a lot - That will be really helpfull.
I've installed the lite version (without cube) and just wondering if I can change the keyboard when texting, I find the individual keys a bit too small, wonder if a different style keyboard is out there?. Also when writing out the 1st line of the text and upon reaching the end of the screen it does not scroll to the 2nd line but continues across with loss of text already typed to the left...any ideas how it can be resolved?
Thanks
Does anyone know how to fix this function in WM6.5? Running Energyrom on my TP2. When I enter the first characters of my contact name in the To field both in sms/mail, nothing happens. Only when I press backspace once the suggestion list appears.
This goes for both my software and hardware keyboard, regardless of XT9 settings... For the rest it doesn't lock up or anything like I read in other forums, I can select the contact from the list and it replaces the entered characters with the full contact address. This works fine. It is just that I would like the suggestions to appear directly when typing characters...
An update to the latest EnergyROM fixed this! Case closed