Develop Bugs

Is there any O2 (eng) rom can be used on Mda pro ? thanks

where i can get the rom?

O2 english ROM
Yes ofcourse there is O2 english ROM. U can get it from XDA ftp site.
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
and then click ftp://xda:[email protected]
go there and then open Map Uploads ----- then go to Universal File the last right side and then open ---- Shipped ROMs and there you wil see xda EXEC rom and download it : this is direct ite but sometimes it doesnot work:
ftp://ftp.xda-developers.com/Uploads/Universal/Shipped ROM/

Hi
Yes there is, I just did it and it works a treat! Its on the ftp site under shipped roms. Read the jasjar update guide elsewhere in this forum.
You'll need to install winrar in order to unpack the .exe from O2.
There are a few little oddities + if yr on t-mobile you wont want all the O2 junk. I'll post later what I did, I have stuff from O2, T-Mob and JasJar extended roms (but not much of each). An awful lot of sh1te comes with the device, and some simple messing is required to excise it.
I can tell you that in my experience:
- JasJar rom is slower than t-mobile (even before you install contents of ext rom.
- O2 Rom (with no extended rom) is quicker than MDA Pro rom
- O2 Rom + selection of cherrypicked cabs from mda/exec/jasjar runs better than t-mobile+tmobile ext rom.
Also, installing the XDA rom seems to fix the issue where the ruddy phone does not ring until 3rd ring when it is turned off. (I shall experiment with this more later) <--EDIT Nope, still does not ring until 3rd ruddy ring!
Anyway, i'll post a step-by-step, collating all the info from the helpfull chaps on here.
IMHO though, O2 run is currently the way to go.
Nigel

O2 Rom
Click below:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site

And what about the German Hardware-Keyboard when I would install the English o2-Rom on my German MDA Pro? Would like to still have a German keyboard but an English OS. Like my Windows XP.

NiteShift:
You schould read
http://forum.xda-developers.com/viewtopic.php?t=29354
to get a german Hardware-Keyboard on TM-MDAPRO (German).
The Software-Keyboard is branded into the english ROM
(JASRAR or XDA EXEC). You shoult install
http://www.resco.net/pocketpc/keyboard/default.asp
RESCO´s Keyboard/Pro to overlay it.
I´m using german`s MDAPRO with O2 XDA EXEC because
german MDAPRO crashes often.

NiTeSHiFT said:
And what about the German Hardware-Keyboard when I would install the English o2-Rom on my German MDA Pro? Would like to still have a German keyboard but an English OS. Like my Windows XP.
Click to expand...
Click to collapse
in HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty\ change Layout from 0x10409 in 0x10407 (409 in the local code for the US keyboard and 407 is the code for the german QWERTZ)
Azhad

New dutch t-mobile rom available

Hi,
I noticed there is a update available for the MDA PRO on the dutch t-mobile site.
Has anybody tried it already?

Can you post a direct link to the update? Nevermind, got that: http://www.t-mobile.nl/zakelijk/htdocs/page/service/hardware_updates/mda_pro_update.aspx
The worst thing is that I attempted to upgrade my Dutch MDA PRO with I-mate rom yesterday and... now I have a brick. How UNOFORTUNATE, just couldn't wait 1 day!! Will go to a local T-Mobile shop today and try to play a fool (I don't really have to play, I am a fool!!!) and see what happens. Maybe they'll fix free of charge (I still have a warranty).
cheers

This should be the link:
http://www.t-mobile.nl/zakelijk/htdocs/page/service/hardware_updates/mda_pro_update.aspx
The site is in Dutch

includes:
- ms push mail
- msn messenger (new in nl rom :wink: )
- option to personalize icons on the today screen
- new comm manager
- the taskmanager has been included in the startmenu
its in english, has radio 1.10.03
and its alot faster then original tmob nl rom

Is it AKU2?
Is A2DP included? :roll:

On another forum i read that AKU2 is icluded and also A2DP.
Remote SIM access for Bluetooth carkit/headphone is also available

Bedankt voor de update !!! (Thanks for the update)

Does anybody know the differences/advantages/disadvantages between the 1.10.03 and 1.11 radio versions?
What's the influence on the battery life? Has it improved or is it worse than before?

I unlocked the phone first with the buzz program after that i upgraded it with the T-Mobile ROM. Now my mda is stuck at the boot screen after i updated it. anyone know what to do?
it shows:
R 1.11.00
G 42.45.P8
D 1.30.115WWE
With a t-mobile background.

see the following topic: http://forum.xda-developers.com/viewtopic.php?t=43592&highlight=stuck+bootloader
also try search next time

I have updated my phone from Qtek rom to this rom and it's working very nice. gonna test it this weekend, but all things are in this ROM.
1 thing i haven't seen in other roms is the softkey app. with this app you can select what the softkey must do (other then contacts and calender).

How about the battery icon on the top bar? Can we replace it with time?
Can someone please really confirm if it has A2DP and AKU2 working perfectly.
I have an XDA Exec. I tried extracting the files, but it seems this one have different files with it. Can we still use this using the No ID Tool?

Can someone upload it somewhere? It is moved from dutch site now

it is not moved...
direct link http://www.t-mobile.nl/zakelijk/media/download/UNI_TMNL_130115_130233_11003_WWE_BL101_Ship.exe

Thanks

Hmmm.
I hate T-Mobile Colors otherwise I would upgrade...
Hey is it possible to upgrade WM5 device emulator ?? then we copuld just test it and see what it looks like
Bartjan! can you post some screenshots ? I am interrested to see what the - option to personalize icons on the today screen looks like
Plus is at a decent task manager ??
Regards

Man, just change the theme. What's the problem? The default Windows Mobile theme is included.

I know but the Phone dialer theme is a problem, because if you change it to default in the registry then you loose the video call functionality

Is this rom in english?
I would like to upgrade my mda pro with this rom, it would appear it is english but can someone confirm this please?

As to my knowledge the MDA PRO ROM of the T-Moboile is WWE
But I have not upgraded yet so....

I want to update HTC Tytn to WM6

Hi all,
I live in germany and i have a HTC TyTn from E-Plus.
I really would like to update to WM6 but i have some questions before i start.
I downloaded "WM6 ROM Kitchen for Hermes GER" i think that's the right package but i couldn't find E-Plus as OEM-Partner ?
My device is actual unbranded. (E-Plus has shipped it like this) but now i'm sure that i will lose the WAP and MMS settings (and maybe some other things)? Has someone else succeeded to update a TyTn from E-Plus to WM6 ?
Is the german keyboard layout supported. (getting äöü by pressing Shift-space after aou ?) Where do i find the correct settings for Wap and internet access after the firmware update ?
If i don't like wm6 is it possible to switch back to the original firmare ?
Where can i find the original firmware from E-Plus ?
I think i'm quiete familiar with PCs but i have never flashed a Pocket PC before so i want to be sure what will be the next step.
Thanks for your answers
Christian

New ROM [06/08/07]: Dopod 838 Pro [3.54.707.4] WM6 ROM code for Australia Network

http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?

Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Click to expand...
Click to collapse
Bet we don't see a JasJam Telstra tho'....

gomax said:
Bet we don't see a JasJam Telstra tho'....
Click to expand...
Click to collapse
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell

I suspect we will never see a JasJam ROM as imate have dropped HTC as a supplier. I doubt they will got to the trouble of providing WM6 and Telstra won't do it on their own.
The original Dopod SEA WWE works great and also automatically sets up Telstra's settings. It also has the bonus of not being carrier branded and pleasingly less green than the HTC ROM.

Thanks a Million Guys.
I am sure I-mate will never have an update for JasJam especially with a WM-6 ROM.

ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
So NextG is a definite go with this rom? Should I see an H in the menu or just 3G??
Greg

I just have the 3G icon to start off with, then it goes to H when i start up the data connection.
Only thing i had to do to get it going was set network type to WCDMA

ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
http://www.imate.com/support/PPC_OP_Settings/Australia_Telstra.CAB
drgmt said:
Hi Guys.
Here is the way to get "everything telstra" working on your black dymond.
Step one
Install the attached telstra my place cab. Then proceed as follows....
Under connections select new connection.
Name it Telstra Internet
Click the modem tab. Click new.
Name the connection Telstra Internet
Select a Modem (GPRS, 3G)
access point name telstra.wap
Click finish
Set proxy to 10.1.1.181 port 80
HTTP should be 10.1.1.181:80
Then open telstra my place icon and navigate to foxtel. This should work.
Note to access non telstra sites you might need to disable proxy in my connections
Hope this works guys. pm if any trouble.
drgmt
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/124404-post8.html

I flashed this ROM on my Telstra i-mate Jasjam (though I use Optus) . Works great! Network Wizard automatically set up all Optus settings. Now get 3G and HSPDA speeds and MMS settings all work! Thanks to all for sharing their insights and making our devices better than ever!

new official (really official) ROM!
AT&T just released their official WM6 ROM. I won't be able to load it until tomorrow. If anyone does, please post here if it's any better than the original "official" ROM.
http://www.america.htc.com/support/8525/software-downloads.html

Imate Telstra Rom Windows Mobile
Hi spoke to a support person about a week ago and he reconed a new rom was coming for Telstra customers for Mobile 6

Hi all
Sorry if this question might sound silly but i am new to this.
I have recentley aquired a imate jasjam:
ROM version; 1.31.305.2
ROM date; 09/08/06
Radio version; 1.20.31.10
Protocol version; 32.52.7020.00H
ExtROM version; 1.31.305.103
now this is set to telstra settings
I however have a three network and dont know the setting to set it to work with three network. when i rang 3 support they told me i need to get the dopod pro which works on their network.
I though the dopod pro and imate jasjam where the same phone but they tried to convince me it is different and advised me of not trying to put dopod software on jasjam as it might lock the phone.
So now i am totally confused
Do i update my imate with the WM-6 ROM from above link? if so how...
thnx in advance for any help

Official imate WM6
Here is a link to the official release of the imate WM6 release for the Jasjam: http://clubimate.com/jasjamsupport/JASJAMAU.html
You can then configure your settings for any operator after that. And you are right - the 838pro and jasjam are the same!

I would recommend flashing the Dopod rom or a Schaps rom. These have Network wizard which will setup all your settings. I am on 3 also and use Schaps rom. Works perfectly.

thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers

shaker22a said:
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
Click to expand...
Click to collapse
Follow the guides available and you won't go wrong.
It was daunting at 1st for me, but after you'v done it once it's easy!

There is a Telstra WM6 rom
I'm a bit confused by some of the comments above. There is a Telstra WM6 rom available on the Club iMate site. I had downloaded and installed it successfully but unfortunately it is not supported by BB Connect 4.0.0.9x so I went back to the Dopod Asia build.

Another update from 3Aus - 6 months old, but not listed anywhere?
Strangely, I can't see any mention in the forums of the 3Aus 838pro update available from 3... They mention version 1.30.707.8, which looks like it's supposed to be newer than the one mentioned above (which ends in .707.4)... It's been available for a while, and I don't know how it compares with some of the cooked ROMs available.
http://www.three.com.au/Dopod (Select 838pro from the dropdown, then "Planet 3 software upgrade" link, then another "Planet 3 software upgrade" link... Page contains download and install instructions, and some )
Direct link to download: http://203.210.124.136/3/software/Dopod_838_Pro_p3.exe
Supposedly, according to an sms I got maybe 6 months ago, this update is supposed to enable streaming content on Planet3. I haven't tried it yet, but will be doing so in the next few days. Has anyone else had a look at this? It's not listed in the wiki either, as far as I can see... (I'm about to try it out because of not being able to get Planet 3 streaming under WM6.1...)
Edit: Never mind, this is a WM5 update. We don't have it listed anywhere, though, so I'll add in some details about it...
ROM Version 1.30.707.8 Date 12/13/06
Radio: 1.27.30.10
Protocol: 32.60.7020.06H
SPL: 1.09
IPL: 1.01
It does have streaming under Planet 3 working, though. I'll try to figure out how it works.

Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Click to expand...
Click to collapse
Hi there,
Total noob here. My dopod is running windows mobile 5 - will this rom upgrade my OS to version 6?
Thanks in advance

This link is not working, is there any other linkwhere i can download
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4. Currently i have 3.54.707.3 Aus Hutchison - 3 Network ROM.
Can any one send me the link to download.

How to upgrade a German T-Mobile MDA compact III to WM6?

Hi everyone,
I'm looking for someone who already managed to upgrade a german T-Mobile MDA compact III to WM6. Has anyone experiences with this? It's my business phone and I don't want to break it.
1. Is there any chance to reflash the old WM5 ROM if something goes wrong?
2. How can I save the old ROM!?
3. Do I need to setup any regional settings if I use the O2 ROM for example?
Thanks for all answers!

bzn said:
Hi everyone,
I'm looking for someone who already managed to upgrade a german T-Mobile MDA compact III to WM6. Has anyone experiences with this? It's my business phone and I don't want to break it.
1. Is there any chance to reflash the old WM5 ROM if something goes wrong?
2. How can I save the old ROM!?
3. Do I need to setup any regional settings if I use the O2 ROM for example?
Thanks for all answers!
Click to expand...
Click to collapse
You shurely can use the O2 ROM. Regional settings? You can change the regional settings in the ROM, but you don´t neet to if you use the german version of the O2 ROM.
There is a way to make a backup of your curent ROM to a storagecard. Use the search..
You should make a backup of your pim (contacts, tasks, calendar etc.) with PPCPimBackup because you can restor them with thiis program, but not with SPB Backup..
Is your phone sim- or netlocked? Normally the german tmob devices are..

IMPORTANT: You can update - but before you flash your rom with any new os (like the O2) do the "uspl" (CID Unlock) first!
Look here http://forum.xda-developers.com/showthread.php?t=308242

I have updated mine. Everything works fine, but the menues are in English.
The phone must be CID unlocked then you can flash any ROM you like. You can also find a CAB for T9 input in German.
Ciao

Thanks a lot guys for all the information. I'll report later if it worked...

Success
Thanks for all your information!
Everything worked fine.
At first I tried to make an backup, but I was not really successful, see here: http://forum.xda-developers.com/showthread.php?t=312871&page=5
But it didn't matter because I found a german wm5 rom for t-mobile:
XDA-DEV FTP -> "Uploads/Upload/Official MDA Compact III ROM/MDA Compact III German.exe"
So here is a conclusion for all noobs, like me:
1. Run USPL, get it here and read all the stuff: http://forum.xda-developers.com/showthread.php?t=311403
2. Patch any ROM you like, for example one of those: http://forum.xda-developers.com/forumdisplay.php?f=362 or get one on the xda-dev ftp
I tried three or four of the ROMs from the forum, it was possible to flash them all, but I had to try it twice to "remove" the german O2 ROM (flash another ROM over the O2), but maybe I did something wrong in the first place.
What I would finally like is a T-Mobile branded german WM6 ROM. If anyone could give me some tipps where to start, I would appreciate it. I think it should be possible to extract the german O2 WM6 OS and somehow mix it with the T-Mobile stuff from the WM5 ROM. I know there is a lot information here on the forum, but any hint is nevertheless very appreciated

bzn said:
Thanks for all your information!
What I would finally like is a T-Mobile branded german WM6 ROM. If anyone could give me some tipps where to start, I would appreciate it. I think it should be possible to extract the german O2 WM6 OS and somehow mix it with the T-Mobile stuff from the WM5 ROM. I know there is a lot information here on the forum, but any hint is nevertheless very appreciated
Click to expand...
Click to collapse
what t-mobile stuff you like on phone?
try the Black&Blue 3.7 GERMAN ROM or wait 1-2 month for the HTC WM6 ROM or cook by your self
*ps i have an O² xda orbit but my provider is t-mobile. i currently use the WM6 GER of O²