Since I havel installed WM6 on my XDA Cosmo I have the new text input method xt9 on my Cosmo.
Normally this would be good, but many times when I will enter a space after one word the Cosmo use the proposed t9 text which is very often wrong!
I haven't found a possibility to disable the xt9 method and I hope someone could help me?
Thanks
press 'fn' then 'space' and then deselect xT9 in the menu.
Thank you very much cymark,
You make my life easier ;-)
cymark said:
press 'fn' then 'space' and then deselect xT9 in the menu.
Click to expand...
Click to collapse
But someone knows how to disable it completely, maybe some register hack?
Related
Hi,
I was wondering how to get the t9 utility when using the qwerty keyboard (sliding one, no touch screen one)
It was before, but know after install this ROM is no longer there
Any help please?
Hi Sniuk!
If I'm understanding right you want the word completion aka t9 (full words are suggested when typing few letters)..well just follow this explanation..
Go into the Settings screen..you'll find the "input" icon (placed between buttons at left and lock at right..)..just select and press it..a new screen will be in front of you..right?just look at the bottom..find and select the function "Word Completion" and you are in, just put a tick on "Suggest words when entering text" and..here you go!!
Settings-->Input-->World Completion-->Tick on Suggest Word Completion..
thanks for your answer but...
i havent got that "Word Completion" ... that`s the problem
i
I`ve been looking on all settings for it, but i cant find it.
i`ll update soon to schaps 3.54b or c , will see if there is that function on it.
cuz i really miss it
thanks again for answer me
regards
Thats weird...I had it with 3.57a. But now have flashed 3.54c which also has the 'word completion' tab.
ummm... might be a compatibility issue
i just flash it to 3.54c and it was the word compl. tab there, but after install japanese input and lets japan6 soft , it disapears >_<
...so I can't have both on my hermes?
Is there a way to disable T9? On the Cavalier T9 is silly and gets in the way. Thanks in advance for your time ...
When Typing a message, press the "Fn" Button then "Space" a menu should pop up click ABC instead of XT9 English,
When you do this once it should stay like this for good, do it again if you want to revert back to T9!
Perfect
That did it, thanks!
Hey everyone,
I cant seem to work out how to get auto complete to work when using the hardware keyboard.
It worked on my TYTN II and i really liked the feature as i am entering service log numbers and i dont have to look at my book each time to see what the next number is.
Any ideas how to get this going>
I have set in advanced config for word suggestion to 4 (it was on 0) and in input options > options > xt9 settings > i ticked word completion in abc mode (for phone keypad only) and its not coming up.
I have soft reset the phone as well.
Have tried searching but havnt found much.
Cheers
dude u have to search for enabling old type completion.. I did it...and it works... before that I had the same problem - here - http://forum.xda-developers.com/showthread.php?p=4049651#post4049651
Thanks for that!
Found it, and now im happy
Here is the fix incase anyone else wanted this.
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
Great ! works like a charm.
Cool.... been looking for this.
Shadoxity said:
Thanks for that!
Found it, and now im happy
Here is the fix incase anyone else wanted this.
Click to expand...
Click to collapse
This is my first post, so please forgive me if the answer has already been provided somewhere else.
I have a TP2 purchased in Hong Kong that has the Chinese Fonts built into the ROM. The ROM version is 1.19.721.1 (51489) WWE.
I have checked in the registry and there is no HKLM\Software\Tegic entry.
The other keys are
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File :\windows\compime.dll
and
Layout Text : COMP IME
Word completion using the onscreen keyboard and/or hardware keyboard does not work.
There is no normal keyboard available for selection, only the Touch Input
Could anyone advise how to fix this?
Thanks in advance, Gary
this should do it
http://forum.xda-developers.com/showthread.php?t=534126- for the pdac hebrew
Just wondering if anyone has faced the qwerty keyboard changed to a funny number key pad that has only 2 alphabet p and w in it? I am wondering if it is because of this tweak that is causing it. It will change without new software installation after a few days of usage. It has happened to me in 3-4 occasions already.
Only way to overcome it is for me to restore to previous backup. After a few days, same thing would happen and again I have to restore. So frustrating!
st8800 said:
Just wondering if anyone has faced the qwerty keyboard changed to a funny number key pad that has only 2 alphabet p and w in it? I am wondering if it is because of this tweak that is causing it. It will change without new software installation after a few days of usage. It has happened to me in 3-4 occasions already.
Only way to overcome it is for me to restore to previous backup. After a few days, same thing would happen and again I have to restore. So frustrating!
Click to expand...
Click to collapse
Yea it happens to me to!
Changing the reg keys back fixes it but then i loose auto complete... stupid bloody HTC, why couldnt they just make it all work!!!
I seem to get the proper keyboard in my text messages though, and everywhere else the numbers :S
Hmm.... seems that this tweak is causing the keyboard problem then?
I really dont want to lose the auto-complete feature.
i wish one of the smarter members of the community could work it out!
Same problem here! And it's very frustrating to be trying to type words and have numbers appear... please help! I did the registry edit and am having number appear when I press letters on the keyboard......
chocovash said:
Same problem here! And it's very frustrating to be trying to type words and have numbers appear... please help! I did the registry edit and am having number appear when I press letters on the keyboard......
Click to expand...
Click to collapse
Normally, all you have to do to enable the word completion on the hardware keyboard is to pop up the SIP keyboard and tick the box at the left of the keyboard from "ABC" to "XT9," then simply slide out the hardware keyboard. It works for me every time.
On my Kaiser I always set word correction to be T9 (pop up list of suggestions) rather than XT9.
I did the change using advanced config utility. The advanced config utility I have for the TP2 does not have this feature.
Who know how to adjust the registry to enable T9 instead of XT9?
Not sure if this is what you're looking for but here goes...
Go to "Settings" tab in TF3D
Tap "All Settings"
Go to "Personal" tab
Tap "Input"
With "Touch Input" selected, tap "Options..."
Go to "XT9 Settings" tab
Uncheck "Auto-Substitution"
ohyeahar said:
Not sure if this is what you're looking for but here goes...
Go to "Settings" tab in TF3D
Tap "All Settings"
Go to "Personal" tab
Tap "Input"
With "Touch Input" selected, tap "Options..."
Go to "XT9 Settings" tab
Uncheck "Auto-Substitution"
Click to expand...
Click to collapse
Thanks for the reply but that's not it.
In XT9 the default, word suggestions appear in a row across the screen.
In T9 the word suggestions appear in a pop up block on the screen.
samsat said:
On my Kaiser I always set word correction to be T9 (pop up list of suggestions) rather than XT9.
I did the change using advanced config utility. The advanced config utility I have for the TP2 does not have this feature.
Who know how to adjust the registry to enable T9 instead of XT9?
Click to expand...
Click to collapse
Has anyone figured out how to enable T9 instead of XT9 on the TP2?
I think the answer to your question is found in the thread:
http://pocketnow.com/tweaks-hacks/bring-classic-word-completion-back
I'm not very sure as I don't know what the T9 is supposed to look like...
Gr.
kurtfimmers said:
I think the answer to your question is found in the thread:
http://pocketnow.com/tweaks-hacks/bring-classic-word-completion-back
I'm not very sure as I don't know what the T9 is supposed to look like...
Gr.
Click to expand...
Click to collapse
Many thanks, that worked.
kurtfimmers said:
I think the answer to your question is found in the thread:
http://pocketnow.com/tweaks-hacks/bring-classic-word-completion-back
I'm not very sure as I don't know what the T9 is supposed to look like...
Gr.
Click to expand...
Click to collapse
T9 is a text predictive input method found mostly on mobile phones, where you use numeric keys to enter letters (hence the letters on each key) and the software predicts the word by the sequence in which you press the keys. This input method is present on my Dopod D810.
The word completion function being discussed is not a part of T9, but a Pocket PC/Windows Mobile feature that has always been present on PPC devices (way before these PDA convergence phones) but has been replaced by HTC to give a different behaviour and appearance.
I think I have the problem figured.
Once you do the reg tweaks T9 pop up word suggestion works great until you try and do a new contact.
When you move from a text field to a number field the keypad automatically changes to numeric and after that it will not change back again at all for any text field.
Some clever person out there needs to work out what other registry change needs to be made to re-enable the auto switching of the keyboard between text and numeric fields while still maintaining the T9 word suggestion.
Hi guys!
I'm trying to turn on Word Completion for the full QWERTY keyboard, but I cannot find how to. I know that you can toggle Word Completion through Personal => Input => Options, but only for XT9 and the Compact QWERTY. I would like to enable it for the full QWERTY.
Does anybody know how?
Thanks for any help in advance!
Kind regards,
Piet
I'd very much like to know how to do that as well. Tried in the past, but it didn't seem possible via the standard settings.
I found the answer myself!
I found the answer myself! The trick is to change 2 registry keys.
Change these two registry keys under HKEY_LOCAL_MACHINE\System\CurrentControlSet\ Control\Layouts\e0010409
- Change the value of Ime File from \windows\eT9ime.dll to \windows\compime.dll
- Change the value of Layout Text from ET9 IME to COMP IME
Perform a soft reset and you wil now see that word completion works in the default language of your device.
You could replace the dictionary used (\Windows\Mssp2.lex) by one of your preferred language to change this.
For the Dutch users I have attached a CAB file which does this all for you. This is for WWE devices and you end up with Dutch Word Completion only.
Kind regards,
Piet
On my device I can turn it on whenever I want by bringing up the on-screen keyboard then hiding it. It is only temporary, and works until I close the keyboard and go back to portrait.
The problem with the reg edits is that eventually your keyboard will get stuck. The way to do it without messing anything up is through HDTweak. Not HD2Tweak. There is a difference. Once installed scroll down and turn xt9 off. Then the very next option will be T9. This is what you enable. Dont forget to soft reset. You will have auto correct and word completion perfectly after that without any problems.
thebigrhinoone said:
The problem with the reg edits is that eventually your keyboard will get stuck. The way to do it without messing anything up is through HDTweak. Not HD2Tweak. There is a difference. Once installed scroll down and turn xt9 off. Then the very next option will be T9. This is what you enable. Dont forget to soft reset. You will have auto correct and word completion perfectly after that without any problems.
Click to expand...
Click to collapse
The funny thing is that HDTweaks does the exact same thing as my cab does.
I used SKTrack to monitor the changes made by HDTweak and it changes the exact same registry keys to the exact same values I suggested...
thebigrhinoone said:
The problem with the reg edits is that eventually your keyboard will get stuck.
Click to expand...
Click to collapse
Checkout my cab, it includes a tool to fix the stuck keypad: http://forum.xda-developers.com/showthread.php?t=772413
pietsukkel said:
I found the answer myself! The trick is to change 2 registry keys.
Change these two registry keys under HKEY_LOCAL_MACHINE\System\CurrentControlSet\ Control\Layouts\e0010409
- Change the value of Ime File from \windows\eT9ime.dll to \windows\compime.dll
- Change the value of Layout Text from ET9 IME to COMP IME
Perform a soft reset and you wil now see that word completion works in the default language of your device.
You could replace the dictionary used (\Windows\Mssp2.lex) by one of your preferred language to change this.
For the Dutch users I have attached a CAB file which does this all for you. This is for WWE devices and you end up with Dutch Word Completion only.
Kind regards,
Piet
Click to expand...
Click to collapse
Thanks for the info bro its really useful for me