Hy,
for connect my pda to my ALICE Flat Adsl i need a client PPPOE to insert user and password,
Are there some software for pocket pc 2003 that have a PPPOE client?
Thanks
Bye
Paolo
PPPoE client for Windows Mobile 2003/PocketPC 2002
This post is a bit old, but I've been very suprised at the complete lack of information on PocketPC PPPoE support on the net...
In any case, there is a Japanese version of a PPPoE connector, but it only supports Windows Mobile 2003 and PocketPC 2002 (not WM5, unfortunately.)
http://flets.com/spot/pdasetup_download.html
Install via ActiveSync. Note: this is a Japanese application and I have no idea what it will look like on a phone without the proper language packs. If I had anything but my X01HT (HTC Hermes, WM5) I would test and send screenshots
I tried installing the WM2003 version on my Hermes, but it checks the OS version and aborts the install. My guess is that it probably -would- work on WM5, but... <sigh
Any coders willing to tackle this? NTT's "Flets Spot" service in Japan requires PPPoE to connect to a hotspot. Ridiculous, I know, but unavoidable. I've asked NTT as to when/if they'll make a WM5 version of this tool, but no replies yet.
best with router
I suggest You to buy a wi-fi router.
With it in my home I connect at same time 2 notebooks and the 9090.
Router has the ppp settings for connect to dsl without any PppoE protocol
Hello,
I've desinstalled the Toshiba bluetooth drivers / stack on my Latitude D510 because they don't support PAN service with my TyTn (WDA Live 0.2) to access a 3G connection through it. Apparently the MS stack can do it (it's working with the same TyTn of a friend)
But since the "downgrade" the blue led for bluetooth activation is off. I try with Fn+F2 to switch on /off but it affect only WiFi card and the led is always off.
How can I made this led working again ?
Matthieu
I'm using the Toshiba stack right now to access internet from my Blackjack. I don't know why you would have a problem with the stack.
the toshiba stack doesn't recognize the pan service with WM6 os , the M$ stack does and work.
I have the same prb. with my asus internal BT device ( BT183 bluetooth 2.0) , i removed the toshiba stack and reinstalled the driver for the internal module manually but this is not recognized by the M$ stack ....
PLS help !!!
How can i install the M$ stack ???
THX
Davide
Sorry I was off since two days. The problem is not to access Internet from my Hermes with my PC but use my Hermes connected to internet to have internet on my laptop. I uninstalled the toshiba stack but with the MS stack I see no service available on the Hermes from my pc and no services available on my PC with the hermes
tewmgd said:
Sorry I was off since two days. The problem is not to access Internet from my Hermes with my PC but use my Hermes connected to internet to have internet on my laptop. I uninstalled the toshiba stack but with the MS stack I see no service available on the Hermes from my pc and no services available on my PC with the hermes
Click to expand...
Click to collapse
No need to see the service as it work too , on the MS stack just right click the bt icon and select ADD TO PERSONAL AREA NETWORK , you will see your device ( if already paired) , select it and click connect ( run internet sharing utility on tytn and tap connect before connect the pc ).
Thanks you. Yes I can do PAN access to my PDA but I would like to have others services like COM for ActiveSync and File Transfert
Toshiba stack = FTP and ActiveSync services but no PAN
MS Stack = no FTP and ActiveSync services but PAN possible
Matthieu
Dear All
I cannot find the original CD, therefore I cannot install the modem drivers onto my WinXP laptop. The modem drivers are necessary to use my PDA (Orange SPV 3100 - Hermes 100) to connect to Internet via UMTS - HSDPA
Can somebody help me by emailing these drivers ([email protected]) or posting here or attaching somewhere on Internet?
Thanks a lot
Saulo
I was told that modem drivers are the same for different brands, I mean Orange SPV M3100, or HTC TyTN / XDA trion / MDA Vario II / VPA Compact III / Dopod CHT 9000 / Dopod 838 Pro
Thanks and please help
Saulo866
You shouldn't need modem drivers if using a WM6 rom. Am I understanding the problem? The Internet sharing app uses a virtual network driver that works much better than the old modem drivers. And if you aren't using WM6, upgrade to it. The Internet sharing piece alone is worth the trouble.
I belief installing Activesync 4.5 should be sufficient.
Dear All
On PDA side I have an Orange SPV M3100 (Hermes 100) with WM 2006 Professional: CE OS 5.2.1413 build 17741.0.2.1
I am not sure whether this is a cooked rom or shipped one. I am inclined to believe it is a cooker WM06 rom
On laptop side I have
- ActiveSync 4.5.0 build 5096: it works greatly
- winXP SP2
Now my question is: WinXP does not see my Hermes as a 3G UMTS or HSDPA modem. Therefore I am unable to use my Hermes to connect to Internet.
My APN is set correctly, on the Hermes side: I called my UMTS-HSDPA operator and set my device accordingly. But the 3G operator also told me to contact HTC or Orange to download the modem driver to make it accessible by my laptop. ActiveSync 4.5 alone does not suffice, since it is only for sync purposes. In other word currently:
- If my laptop is already connected to Internet (e.g. via LAN or WiFi) then my Hermes can ALSO connect to Internet, via ActiveSync 4.5
- Viceversa, if my Hermes establishes a 3G connection, or GPRS connection, my laptop CANNOT use it to access internet.
If you know how to solve this problem I would greatly appreciated.
Thanks
Saulo
i have winxp pro with AS 4.5 ... and all i have to do is turn on internet sharing on my phone, plug in the cable and im done.. the computer will automatically recognize the phone as a network connection.. and i have tried this on a computer without AS and the computer wouldnt recognize the phone, so it appears that activesync is necessary for sharing (it doesnt sync with internet sharing on, but i believe AS has the drivers that are needed)
By the way I have 2 Italian GSM-UMTS-HSDPA operators: Vodafone and Tim
I have tried. I have set correctly their APN settings: (for tim is ibox.tim.it)
While on Hermes side everything seems fine, (for example Pocket Internet Explorer can open web pages) my laptop cannot use Hermes to access internet, even if ActiveSync connections is established and working (hermes synchronized)
Please help
On Phone goto:
Start ~> Programs ~> Internet Sharing
you should have no problems.
saulo866 said:
By the way I have 2 Italian GSM-UMTS-HSDPA operators: Vodafone and Tim
I have tried. I have set correctly their APN settings: (for tim is ibox.tim.it)
While on Hermes side everything seems fine, (for example Pocket Internet Explorer can open web pages) my laptop cannot use Hermes to access internet, even if ActiveSync connections is established and working (hermes synchronized)
Please help
Click to expand...
Click to collapse
on laptop clik activesync icon in the bar and from "setting connections" disable "allow uSB connection"
then do on ppc what Custel abowe wrote
Thanks to all of you!
Following your suggestions now I can connect using my USB link, between Hermes 100 and my laptop, running WinXP.
I did it by first upgrading to Schap WM06 3.3c
Then making the few steps outlined above
My next question is: was anyone succesfull in using Bluetooth, instead of USB link?
I mean, is it possible to access Internet, via Hermes 100 3G-UMTS-HSDPA connection, by connecting laptop and Hermes via Bluetooth?
Thanks again
Saulo866
By the way I noticed that if you use activesync USB link (you do not need to disable USB connection!) that what happens is:
- if you browse internet in your laptop by using Hermes 100 as a UMTS/HSDPA modem the syncing between laptop and Hermes goes down, stops: the device works as a modem but any synchronization stops working. In other words you cannot perform any synchronization (via activesync) or any other operation, like file transfer, while using activesync as a usb-type-link between laptop and Hermes.
Am I right?
Why is that? I mean why cannot I sync my device (or transfer files) and at the same time use my hermes as a 3g-modem for my laptop?
Thanks
Saulo
any clue why this happens? I mean why you cannot sync and browse internet at the same time?
After connecting to the internet via internet sharing, I re-enabled "Allow USB connections" in AS4.5 nut it still wouldn't sync. I guess at the moment we have to be contented with internet sharing w/o being able to sync Hermes and our computer.
A bit OT but has anyone successfully connected to the internet via internet sharing in Vista?
Yes
Yes I have been using Internet Sharing with windows vista successfully. Once it connects there are no problems BUT it doesn always readily connect and often requires a software reset .
I have WM6 Schap's 3.57 on my hermes 300. The internet sharing works great but when I've disconnected my GSM connection while I'm connected to a Wi-Fi network and I try to use "Internet Sharing" I get the message on my phone: "Cannot connect. Ensure that your phone is correctly configured, service is available, and that flight mode is turned off before trying again."
Probably WM thinks I'm in flight mode altough Wi-Fi is connected.
Is there a way around this?
How can you tell if the phone is using the WiFi connection instead of HSPDA/GPRS/EDGE? (Roaming is a bit expensive)
The USB-modem driver worked with WM5. When I start the "Modem Link" program, windows says it found new hardware. I've installed the driver I used with WM5. I tried using it by calling *99# but it didln't work. Should I call a different number with WM6?
Anyone the same problems and/or solutions?
It does work great indeed.. Internet connection sharing..
Except.. when you want to connect to a VPN.
I never had issues with using WM5/Black as modem. But now.. in the HTC Wm6 (official one) only Internet Sharing is left.
Does anyone have a solution for the VPN connection?
Thanks all!
Arnie
saulo866 said:
Thanks to all of you!
Following your suggestions now I can connect using my USB link, between Hermes 100 and my laptop, running WinXP.
I did it by first upgrading to Schap WM06 3.3c
Then making the few steps outlined above
My next question is: was anyone succesfull in using Bluetooth, instead of USB link?
I mean, is it possible to access Internet, via Hermes 100 3G-UMTS-HSDPA connection, by connecting laptop and Hermes via Bluetooth?
Thanks again
Saulo866
Click to expand...
Click to collapse
I have successfully connected to the interrnet via the blutetooth connection.
In your Hermes, select "Bluetooth PAN' instead of USB under the "Internet Sharing" "PC Connection".
In your PC, click on the "Join a Persoonal Area Network" under the bluetooth option and slect your device and you are done.
PS: Your device must be paired first.
I've had the same issue when connecting to my companies VPN, I had to connect to the Tytn via Internet Sharing via Bluetooth to use the VPN.
arnoutboer said:
It does work great indeed.. Internet connection sharing..
Except.. when you want to connect to a VPN.
I never had issues with using WM5/Black as modem. But now.. in the HTC Wm6 (official one) only Internet Sharing is left.
Does anyone have a solution for the VPN connection?
Thanks all!
Arnie
Click to expand...
Click to collapse
Hi Guys,
Firstly, great site, wiki was a great help for upgrading to WM6 -
Secondly, as the title of the post implies im looking to connect to a WPA2-Enterprise network.
Is there a work around or patch that can be applied to connect to these networks?
I have tried just setting the Wifi to WPA2, i enter the username and password, but it thinks its wrong (it is right, because my vista laptop connects to the network)
Im currently running:
Custel's 2.5 wm6, 147 radio on a Hermes 100 - branded as a dopod 838pro
Thanks,
Rudi
Hi,
I just upgraded my Hermes ATT 8525 from WM5 to the following WM6 version which I downloaded off of rapidshare site:
4. WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
Everything is working great, the upgrade was smooth and I was able to get all my data back and all that except for the WIFI connection.
I am able to connect to my Home Wireless Secured Network (SSID), and it shows that it is connected and has almost all the green bars showing excellent signal quality, but when I try to use Messenger or Internet explorer, it doesnt work. I am not sure why? Is it trying to connect using GPRS or cingulars Internet connection? If so, how do I fix it so that It connects using my home wireless connection. I do not subscribe to ATT/Cingulars Internet data plan etc,...
Any help will be greatly appreciated.... thanks
You should read the thread for this rom and ask your question there:
http://forum.xda-developers.com/showthread.php?t=317339
Thank you much! I posted my question under that post.....