Related
Ok...
I know, this is wierd...but every now and then the \storage card folder just disappears from the system. It's like the pocket pc no longer recognizes that there's an SD card there. I've tried taking it out, and then putting it back in. But that doesn't solve the problem. The only way I could get the device to recognize that there's an SD card installed in the slot, is via a soft reset.
Any suggestions on how to resolve this issue? I used to have an iPaq h4350, and this NEVER happened...
Thanks,
Quordandis
Strange...
Tell more about your SD card and device's ROMs (versions).
Let's see... I have a Siemens SX66 model PH20B1, ROM v1.40.00 WWE, Radio v1.13.00, ExtROM 1.40.125 WWE
The SD card is a PNY 1gb....Wierd, huh?
Thanks,
Q
I have a similar problem. But the \Storage Card 'sometimes' comes after removing and inserting back, otherwise the softreset will only do the trick. Any idea. My ROM versions are as in my sig
Our versions are almost identical, except the ExtROM is slightly different (which I'm not sure really makes much of a difference). Also, taking it out and putting it back in does NOTHING for my device....only a soft reset will solve the problem....
Any ideas?
Thanks,
Q
SD Card spontaneously Disappears
I have the same problem... if I press a little bit the storage card down it appears again. I thing this is due to bad contact result of a fall.
I send it to repair but came the same way, they only up-to-date the rom version.
Should I try to open it and check the contcats !?!?
some more info
When the PPC enters this mode, if I browse the storage card through the PC (via active sync), it shows only the folders and all files are missing. If I sopft-reset it and check it again, (life came back) I could see all the files then.
Any idea why this is?
Yes, I noticed the same thing today...!
The folders on my Storage Card are still there...but are empty! File explorer shows that the folders DO contain stuff.
I have tried to soft-reset, but no luck yet. Strange.
HappyGoat said:
Yes, I noticed the same thing today...!
The folders on my Storage Card are still there...but are empty! File explorer shows that the folders DO contain stuff.
I have tried to soft-reset, but no luck yet. Strange.
Click to expand...
Click to collapse
Softreset worked for me..
I occasionally get this - usually when I have been using tomtom 5 and getting it to recalculate a lot - I noticed last time that the unit was a bit warm, so it may just be a thermal issue - I have overclocked to 530MHz+.
A soft reset sorts it out
I get this a lot too.. Programs that are currently running are
1. PocketPlus 3.0
2. Resco 2005
I notice 1 thing though.. that if I do a quick ON/OFF, the SD disappears and I have to softreset to get it back.
However, my work around is that when I switch it on, I let the thing fully load first before turning OFF the unit. (See through Resco today pluging-in). When the indicator appears.
So far hasn't bother me for more then a week d..
Happy trying.
Will try the same trick then...
I've uninstaled pocket plus 3.0 and never hapen again.I still have resco explorer 2005
Best regards
ooh
Im experiencing that same problem. The only way toget rid of this annoying thing is to soft reset the device.
after unlocking my TMA ExtRom on my MDA Pro, my software - installed on SD-Card, eg. ToMTom, Spb Backup, MortPlayer,.. - cannot be started again!
Even reinstalling does not work!
Is there any trick to get it working again?
Hard reset would keep the ExtRom unlocked again, so SSDD will happen reinstalling any software on SD-Card?
If even reinstalling not helps... :roll: So, make copy of SD card, format it, hard reset with inserted card and install you progs again... have to solve...
I'm not sure, I guess you don't mean that for serious?
Even deleting "storagecard" and inserting a brand new card will initialize this oe as Storagecard2 again,..., therefore SSDD!
I'm sure, all of you who have unlocked the registry have had these troubles, or don't you?
Amazingly, I haven't found any discussions on this issiue? Maybe it's quite too simple, I can't see , please help!
Probably the issue arose due to storing Mail-attachments to StorageCard...
Deleting this feature in the Email Storage Adjustments brought the SD Card back as StorageCard (without any index), and software works fine again...
Changing the Attachment-Storage again to "Storage Card" creates storage of attachments within the ~10MB Ext.ROM space (about 7MB free).
I can live with that...., but anyway, there should be made a change within the registry settings of the system storage for those using any Push-Service...
Is there a well proved solution for that registry-change?
Edit: checking out the correlating topics, eg. http://forum.xda-developers.com/vie...torder=asc&highlight=ext+rom+unlock&start=375
makes me guess, that no solution has been found to fix the known problem?
Hi,
Every so often TomTom on my orbit loses sight of the maps I have on my storage card. I can't see any reason for this and have to recover from a phone backup . Once the internal memeory of the phone is recovered the maps are then visible.
Any ideas on what may be getting corrupt?
Cheers,
Neil
No answers but join the club and email HTC Tech Support.
http://forum.xda-developers.com/showthread.php?t=285511
HTC P3300 loosing TomTom Maps
Me too. Italian OS. Once I even had to reactivate the map, after the restore. Last time that I launched TomTom receiving a msg of the type "Cannot find maps..." I just made the PDA restart with a soft IPL. Will you believe? At the restart TomTom didn't complain for any map missing.
Maybe it's a matter of low available memory when TomTom cannot locate maps.
Hope this might help you. Let us see, if anyone else is posting his experience.
Thanks for your comments.
Once TomTom loses it's maps, a soft rest wont allow it to see them, I just keep on getting the message and the opportunity to download a free one from the website.
I did a bit of playing around last night and can confirm that a hard reset then allows TomTom (installed on the Storage Card) to see the maps (I don't need to reinstall, just run the exe file) so it looks to me as if its something getting corrupt in the standard internal memory of the phone and that this is causing the loss of maps.
Neil
This is an SD card corruption issue. Email HTC to lobby for a fix. See the relevant thead.
I don't see that it's storage card corruption. If you read my last post you would see that the SC was left alone when a hard reset was performed. The hard reset would only affect the internal memory and that cleared the issue.
I think something is getting corrupted in the internal memory and not letting TomTom find the path to its maps. Maybe something is messing up a registry entry?
believe me. I have had this problem over 10 times in the last month. When the tomtom maps go missing, the map folder is usually empty. This can normally be rectified by softg-reseting the device which uses the backup FAT for the SD card (so I've read in the relevant thread) and restores the missing files. However, if the device attempts to write to the card again, after corruption (which TT does on application exit) then the card will be permenantly corrupted.
w0mbat said:
I don't see that it's storage card corruption. If you read my last post you would see that the SC was left alone when a hard reset was performed. The hard reset would only affect the internal memory and that cleared the issue.
I think something is getting corrupted in the internal memory and not letting TomTom find the path to its maps. Maybe something is messing up a registry entry?
Click to expand...
Click to collapse
During a reset (hard or soft) WM5 will do a version of scandisk on any storage devices connected (Micro SD) which will try to fix FAT errors. So a reset does effect the SD card and can repair it.
OK RicardoC & debully, thanks for your advice.
I have already emailed HTC tech support a while ago. You know, I still think Resco file explorer may be the common link to my SD card woes..... I'll have to wait and see.
Cheers
Bluetooth possibly
Hiya,
I had this problem and it seemed to be linked to the bluetooth explorer setting a new storage card (virtual), if you get this problem go into settings and turn off bluetooth explorer and check what storage options are available from the memory settings, the bluetooth storage should have disappeared. Once I'd done this tomtom could find the maps again.
Hope this helps.... and you don't actually have SD problems....
jinx1uk said:
Hiya,
I had this problem and it seemed to be linked to the bluetooth explorer setting a new storage card (virtual), if you get this problem go into settings and turn off bluetooth explorer and check what storage options are available from the memory settings, the bluetooth storage should have disappeared. Once I'd done this tomtom could find the maps again.
Hope this helps.... and you don't actually have SD problems....
Click to expand...
Click to collapse
thank you!
i have tryed that and it seems to do the bussiness
This also happens if you have Bluetooth Explorer activated in your Bluetooth settings.
TT6 losing maps, you are not alone.
I know this doesn't excatly help, but I don't think that this is unique to the artemis.
I have the same problem with TT6 on my himalya (XDAii). It seems to be linked to either phone S/W or BT stack as I have had it happen to me several times after I have made or received a call. My workaround is to remove and reinsert the SD.
Has any one checked if other handheld PC users have similar probs (HP?) with TT6?
I have used TT6 with no problems on X51v.
Only had the problem on the Orbit when the Bluetooth Explorer was activated.
Hi,
I had the same problem on my Orbit, never experienced the SD corruption though. I eventually solved the Map problem by following the instructions, not sure where I got them from, perhaps somewhere on this site.
The instructions stated the following:
1) create an empty file on your PC and name it 'autorun.exe'
2) create a directory named '2577' at the same level as your maps.
3) copy the empty autorun.exe file to the 2577 directory
this did the trick for me
Removed the Bluetooth explorer from the Bluetooth installing settings from the Comm manager and hey presto, maps are back.
Rock and Roll.
Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!
few people have seen this - no solution as yet.
Best workaround is to use the SD Card update method. No USB connection required.
todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.
dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes
I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.
this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.
Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID
The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works
dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.
@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.
I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)
I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers
Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.
Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!
Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers
Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse
ok, I'm really angry... Sometimes when I reset my phone, it starts rebooting over, and over, and over, and over, and over.... Aarrghhh!!!!
Make it STOP!!!! Anyone else get this?
search and you will find
Okay, I did a search and this info is Not easy to find.
Here is what to do:
Yank out the battery, the storage card, whatever it take to get the phone to finish booting.
Navigate with ActiveSync, Resco Explorer or Total Commander to Windows/omap850_sdhc.dll -- rename this file to omap850_sdhc.dll.old
reboot
when you reboot it will reinstall the drivers to your storage card and everything will be fine again.
Happy New Year.
Too bad this doesn't work for the Excalibur. The file is in ROM and cannot be edited.
Try this. Since we can't edit the file.
Just reboot without the SD card. Which should result in a succesful reboot.
Once the device is running, insert the SD card which should prompt the driver to reinstall, and you'll find the reboot after that is fine.
At least this has worked for most of he people I've talked to that have had this problem
If you are using the T-Mobile ROM, the only for sure fix is to flash the ROM to a non T-Mobile ROM.
ROM flashing is found in the sticky in the Excalibur section.
Read this:
http://forum.xda-developers.com/showthread.php?t=307434&highlight=reboot+loop
Good luck!
Just so you don't think the TMO ROM being the problem is only one persons opinion.
It is the ROM. I have tried most, if not all, of the other ROM's posted in this section and haven't run into that issue with any other one besides the TMO ROM.
ever since i switched to that new htc rom (the thread is a few below this one) i have not had any cycling on the reboot with my storage card .. just a thought if your thinking of upgrading
Would anyone mind posting the T-Flash card driver here so us T-Mo rom users could drop it in our Windows folder and change the registry to use the new one?
Hi i got the same issue: When my SD card was in, it rebooted in loop!
And when i retired the SD card, it was fine.
But with SKTool, i deleted duplicated NotificationQueue and with a registry editor, i deleted the key: HKLM/Services/WLM
And now, no reboot looping anymore
Hope it works for u ^^