Related
Hiya, I've been playing about with the extended rom and have the system in great shape, apart from some registry settings, such as the owner info and device name. It would be kinda handy to have these setup automatically but I am totally unable to do it... I'm presuming it's because there is something else that has to be done other than simply set the keys.
I'm using PHM reg ed to export keys as well as simply creating them manually and am using WinCE Cab Manager to make the cabs. I'm on the original O2 Exec rom (well, most of it )
When I run the cab (automatically from a hard reset or manually), I can see the values in the registry but they never appear on the today screen. I've tried a variety of power cycling, soft resetting etc but the today screen is never updated - it always says "Tap here to set owner info". If I do that, the registry keys are cleared out...
If anyone can shed some light on this I'd be grateful - for a small problem it's taking up a lot of time! :?
Cheers!
I've not gone down the .CAB route, but just import these and other settings from a .reg file and have never had this problem.
When I have to install from scratch, the first install is Resco's Explorer (which contains a Registry Editor), then execute the .reg file.
Almost sounds as if the registry changes are not being saved. Is it only these particular settings or are other changes not registered?
Well, I have created loads of CAB files in WinCE CAB Manager to set up my phone, tomtom, etc.
I Used the same method as you. The only difference being that I reset (automatically) after I install them. Could this be it?
Ahh, which WinCE CAB Manager version you running? You need the new beta 1.2 version to be able to create WM5 compatible CAB Files. Can this have something to do with it?
moghisi101 said:
... The only difference being that I reset (automatically) after I install them. Could this be it?
Click to expand...
Click to collapse
Probably the cause. I know I've read and experienced that I must allow the device to flush after changes before I reset it. I usually turn it off, then wait a minute or two before I soft-reset.
Ahh, which WinCE CAB Manager version you running? You need the new beta 1.2 version to be able to create WM5 compatible CAB Files. Can this have something to do with it?
Click to expand...
Click to collapse
As yet I'm not using CABs/Cab-Manager. Couldn't find one when I looked - except at ridiculous money, which I wasn't prepared to waste - so I'm just using the .reg-files manually
Guys, many thanks for the replies!
I'm using my 15 free goes (and hibernating ) on version 1.1 of WCM at the mo, it's too expensive to buy as I would only use it for this as far as I can see - I'll head off and look for the beta next.
I have tried power cycling, pausing while off and resetting as well as soft-resetting from software, but not doing it automatically 'cos I don't know how!
@moghisi101: Out of curiousity, how are you automatically performing a soft-reset and thanks for the heads-up about beta 1.2!
I have written an Autorun.exe file, much like the one in the extended rom. It does not however read a config.txt file. It runs the CAB files (with my apps and settings in) and then resets.
I don't remember where I put the code, so I can't compile one for you. It only needs a slight change from the Autorun sample Microsoft Supply.
At the moment I can set up pretty much everything on the phone. Button Lock, GPRS Settings (including GPRS Auto Attach, etc), Owner Info, Default Volume, Today Screen Plugins (order and enabled/disabled), Date/Time, Screen Config, Infrared off by default.....the list goes on. When I Hard Reboot, It skips the welcome screen (all the time settings etc) and I've got it to ask me which Operator Settings to Install (eg Vodafone, o2, Orange, Tmobile Splash Screens and GPRS connections).
It's much better than the default Qtek, i-mate, and (definately) o2 ROMs...
Just a thought!
Are you annotating your .reg files with semi-colon at the start of a line?
With the PC, I've always annotated my .reg import-files, so that I could remember why I'd done something later on, but found that *no* lines after those annotation would be imported on the Exec (Universal). Don't know if this is specifically a WM5 issue or not. If you put the annotations at the end of the .reg file, all the preceeding key/value content lines *are* imported.
@astage: Interesting about the annotations, that must have caused some pain before you figured it out! I don't have annotations in my reg files as I'm not really using reg files I'm building keys in WinCE Cab Manager by both importing reg exports and typing them in manually.
Unfortunately, the beta version is only available to registered users, so I'll have to abandon that one for now.
@moghisi101: It sounds like you're sorted! That's basically what I had in mind myself, except that I was thinking smaller
Thanks for the thought about compiling an exe, I was thinking I may have to ask a mate to make something like that so if you do find the code and feel like posting one, I'm sure the community would thank you!
I've been looking for something that would just install cabs etc then reboot but not found one yet on the web... I'm a UI designer and so am wary about going down the visual studio path for fear I may start to favour all-grey interfaces :twisted: .
Which autorun sample are you referring to though? I guess I may have to get my hands dirty after all!
No, I don't annotate them, so I haven't come accross this. But, if you save some Keys using a Reg Editor and then use Import in WinCE Cab Manager...ahhh, I think i may know the problem!
1. Don't put Comments in Reg Files
2. Don't use import in WinCE CAB Manager! If the reg key has data above a certain length it will split it to next line using a ";", but WinCE Cab Manager assumes this is the end of the data. So, your Owner Info could be being entered in incorrectly as a result. You have to copy-paste the reg key into a new dword, etc into WinCE Cab Manager. i.e. DONT IMPORT
I hope that vaguely made sense
Yup! Clear as a bell, thanks! I'll try that in a mo, just rebooting. Import is *sooo* tempting though, so simple... Curse my weakness for the easy path!
Hi. Here is Microsoft's Autorun Code (I have that)
You have to make slight changes to allow for reboot at end. It's fully annotated if you dont understand what it means. BTW, you dont need Visual Studio. Infact it's probably the worst root. Use Microsoft's eMbedded Visual C++ 4.0 to compile this for Windows CE, Mobile 2003SE, (or Mobile 5?). It's Microsoft but it's FREE!?
Sweet! Two terms you don't hear very often in the same context are Microsoft and free! Nice one, thanks! I'm downloading Microsoft's eMbedded Visual C++ 4.0 as I type.
You actually solved the problem already though, in a way, pointing out that WCM truncates "strings". I opened an exported key in Textpad and tidied it up (removing the end of line "\" and the "\n\t") then saved it and imported the file into WinCE Cab Manager, made my cab, installed it and soft rebooted from SPB PocketPlus without going back to the Today screen. It worked!
I'm a big fan of Textpad and will use that to make a macro to tidy up exported reg keys so I can import them easily (another triumph for the easy path!).
You, Sir, are a DUDE!
Edit: 16.4 kbps from MS... :roll: For anyone else who decides to go down this path, the killer bit is to make sure your key values don't get truncated! Open the .reg in a text editor and make sure any really long values, like binaries, are all on one nice long line! It doesn't seem to make any difference if you soft-reset from an app or use the stylus btw.
Shame the baby kept us up all last night! I've *got* to get some sleep or I'll end up doing god knows what to my device by accident!
Thanks for the help moghisi101!
Hehe, Gee Thanks. And btw, Textpad r0x!
If you want to do that autorun thing.....familiarize yourself with the whole 2577 method (search it and you'll understand). If you don't want crappy o2 Customisations, etc on your device then you are better off just editing the extended rom, edit the config.txt, add your configuration CABs, and then every time you hard reset all your customisations will appear! NO programming involved. If you then add "welcome.not" file to SD Card, the Welcome screen at hard reset wont appear (if you code this in your autorun file it will work on ALL devices, not just a few including HTC). BUT only do this if your CAB files contain stylus screen settings, and time settings. However, as this is not viable in all situations the 2577 method can be much better. Especially when selling a piece of software, etc (automatic installation and configuration), as I do.
I might email you, later on, a video of what happens when I hard reset my device to give you an idea of what you can do (at the least) and hopefully you can go on to improve on that.
Thought I will give you a kick start. Here are some Regedits I could make for you. Took me a short while, but there are loads more for inbuilt apps (e.g Messagig, etc) but I coudn't remember where the reg values where.
Please note, I couldn't find any of the WM5 ones...completely forgotten them. But these should give you and idea as to where they are. Also, look here in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks_WM5
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks
Some of the ones I have given are from here, but many more I found myself
Hope it helps you (become a millionaire - don't forget me )
You can see the solution here: http://forum.xda-developers.com/viewtopic.php?t=34525
Thanks to Bayondthetech for the CAB file.
Hehe. I feel like a n00b now (which I am really). I hadn't seen that. But I think mine does a couple of extra things that he didn't post....?
Bye
Wow! Holy Cr*p! Thanks for all those reg files! :bows:
I'd looked at BTT's post before and was hoping to use his cabs as a guide. Unfortunately, they aren't currently available (from what I've read, he generated so much traffic with his downloads that his host yanked his connection and he's in the process of moving sites).
Thanks to moghisi101 and a few other posters on this forum, I don't need them any more!
@moghisi101: I had already edited my extendedRom's config file to load and run cabs I store on the SD card (to keep the extRom below 10mb) and realised last night that that already does the auto reset for me, so life gets another bit easier These reg files rock though! Shame you're not running tomom5 yourself, I'll have to sort those out myself!
The next thing to try is to export the BT settings for my paired devices - I'm hoping it will be possible to restore those automatically too.
Attached is the TextPad macro (although it is too simple to call it that really!) that I'm using to tidy up the reg keys for import into WinCE Cab Manager, hope it helps someone!
Post that video!
Hey
Actually, I have TomTom 5....up until 5.10 I edited TomTom's Cab itself but I just haven't had a chance with 5.21 (need to use CabWiz now, not WinCE Cab Manager - no full WM5 support lol).
The TomTom 3 Today settings is same for TomTom 5 if you want to change order/hide/unhide. Most of the other settings are in a .cfg file on SD card for Home Address, etc. Only a couple other settings use Registry...
Anyway....glad to be of some service
moghisi101 said:
... (need to use CabWiz now, not WinCE Cab Manager - no full WM5 support lol). ...
Click to expand...
Click to collapse
Had a brief conversation this afternoon with a friend who uses Microsoft's CabWiz to produce .cab files for bespoke software.
He mentioned that (with CabWiz) if you use the .cab to apply registry entries, then the .cab must also install something, a text file or similar. I can't recall if he said it would otherwise not create the .cab correctly, or that the reg entries may not be applied correctly.
Not yet tried it myself - will have to wait until after the bloody Tax Return is finished!
Strange, It works fine for me? Was his the newer CabWiz that you can use with WM5, like mine?
Hi everyone,
I have an XDA Exec and my current project is to customise my extended rom to install resco, magic button, some ringtones into the windows folder, batti and not have O2 Active (just dingo's connections cab). I have sorted the above, but now I would like to export my whole registry with just these applications installed, along with all my settings 9owner information, MSN, camera settings etc...) If I export the whole registry through Resco, can I then convert that into a CAB using WinCE CAB Manager or soething similar? Is it a good idea? How do I imprt a registry file successfully into WinCE, as I have tried it in the past with previous devices and never got anywhere. I would be extremely grateful for any help, even if its just someone telling me not to bother wasting my time if it won't work!
Cheers,
Fin
WinCE CAB Manager will allow you to make a cab from a reg. However, there are limitations I think, and whether it's wise to do the whole reg is another question. Some of it is volatile. If you pick and choose relevant user settings, you should be safe.
V
vijay555 said:
WinCE CAB Manager will allow you to make a cab from a reg. However, there are limitations I think, and whether it's wise to do the whole reg is another question. Some of it is volatile. If you pick and choose relevant user settings, you should be safe.
V
Click to expand...
Click to collapse
D'oh! I just found out the hard way that importing your whole registry doesn't work for quite a few reasons! Thanks for your reply, I still can't work out CAB manager though. Is there anything particular you have to remember when importing a REG file into a CAB?
There's some issue I read somewhere that it breaks some lines or something in the imported reg. Not sure how or why...
I'd suggest just get the relevant sections, control panel, software, gwes etc... you'll have to glance through your whole reg, try it in individual sections, then compile the lot into one functional bunch.
V
i have been using WinCE cab manager a lot and i have found that importing small sections of 'code' is more reliable than huge chunks, and i have used this methood succesfully to create customised cab file settings (see my theme+ringtone+dialler post) where i extracted parts of the registry and posted into WinCE cab.
thanks
I have added the Blackjack to my collection, which currently includes the i-Mate JasJam (best device I've owned), the QTEK 8500, HTC Excalibur, many Blackberries (hate all of them) and now the Blackjack. I absolutely love this device and am trying to make it better, so here are my questions...
1. Has anybody figured out a way to delete emails with a single button press like the backspace/del key on a Blackberry?
2. Is there a way to set up a shortcut directly into Outlook email without first going into the messaging menu?
Thanks! Hope you had a great holiday!
-CJ
Mark all read and Delete all cab
Here is a Microsoft's developers cab that does exactly that. I have had it installed on my HTC brander S620 from day 1 and it is a wonderful addittion.
You will find that once installing there are two new menu items in the right soft menu - MARK ALL AS READ and DELETE ALL
I found this one day on the web (sorry - can't remember where) when I was first making the switch from full windows mobile to smartphone. I was thrilled to find it so I downloaded immediatly and loved it.
Enjoy
PLEASE NOTE -- This is a CAB file attached not a zip. I was in a hurry and when it would not let me put up a cab I just renamed the extention. Make sure you download the file and then rename the file extention to .cab. Then drop on phone and install.
Thanks JMD0116! I'll give it a try.
Hi!
I have a Dell Axim x50v (VGA device) running WM5 AKU 2.3, and would really want to have HTML support for email, since WM5 email client doesn't support it. I don't want to download any extra third-party application like Flexmail, but rather would like to know if there is some kind of a plugin for this native email client that allows HTML support.... I heard of WM6 and it's richer email client. Is there any way you can install WM6 email client on a windows mobile 5 device like mine? If not, is there any WM6 ROM that will work on my PDA? (Other things like viewing Internet Explorer Mobile in high resolution mode, or the new "calendar ribbon" would also be a worthy upgrade.)
.... There is a very slight chance that Dell will release an official WM6 upgrade considering how old my model is.... (it came out in 2004, being replaced by x51 models in late 2005).
Any help will be greatly appreciated.
For what I have read, you are basically out of luck.
You can't rip the email client out of WM6 since it seems to be very much incorporated within the OS. If you want to enjoy the WM6 email client you have to upgrade.
As far as if there is a WM6 I am not sure and since you have reached a HTC forum, well, have you tried a Dell site?
agovinoveritas said:
You can't rip the email client out of WM6 since it seems to be very much incorporated within the OS. If you want to enjoy the WM6 email client you have to upgrade.
Click to expand...
Click to collapse
Quoted for the truth.
Outlook (PIM) depends on Shell, Shell depends on Coredll, Coredll depends on kernel. Bummer.
Like I said, there is no chance that Dell will be releasing WM6 upgrade for its handhelds, so visiting "aximsite" wasn't very usefull for me right now.
When you guys mentioned that the WM6 email client is very much incorporated with the OS, does the same apply with the Internet Explorer Mobile that now supports high resolution, or the Microsoft "MarketPlace"?
Is there at least a third-party HTML support plugin for the native email client, or is Flexmail the only solution for viewing HTML-formatted emails? (I would really prefer a "free" third-party application.)
Xdenwarrior said:
(I would really prefer a "free" third-party application.)
Click to expand...
Click to collapse
Try Qmail IMHO the best email program and what is more important free
http://q3.snak.org/download/ take most up to date compilation from Nightly build section and don't be afraid about japanese page Qmail is in english! At the bottom of download page you'll find openssl extension for secure connections.
I can't properly download this "Qmail" program. If I want to download and install it through activesync by first of all extracting the zip file from the nightly build and then running the exe file, it eventually says "not a valid Win32 application" or something like that. In fact, i can't stand that official japanese website, cause i get that same message for anything i try to download from there.
Actually, i got a chance to see how Qmail works (looks pretty nice - it supports HTML, right?), but not necessary to use it. Instead of running it on a PC, i copied right away that zip file to my device, and installed Total Commander on my PPC. However, I had to extract each component for Qmail separately using the Total Commander. Really a disasterous download, if not even. It ended up opening the program, but never really saving it anywhere on my device. After a quick soft reset, there is no more trace of it.
So, SERIOUSLY, does anyone have an alternate cab or exe file of the latest nightly build for Qmail v3 that actually works, not links to that japanese website?
I think you don't get the idea of inslalling it it's not self installing program! unpack it on your desktop than move whole folder with all files (all dlls and q3u.exe) to some folder on your ppc, probably the best is storage card. You can copy files that way by opening activesync and than klicking on explore button there will be your ppc just like any other folder in normal desktop pc. Copy whole qmail folder to it and thats it, you can start qmail using totalcommander on ppc or later create some shortcut to program on today or in programs.
here is packed folder "Qmail" with all needed files unpack it on your desktop and copy unpacked folder with files to your ppc using activesync explore button! Sorry but I can't write it more simply This one works on my ppc as all other versions did!
http://przemek.nekla.pl/Qmail.rar
and one more thing here you can read somthing more about qmail and the power of this program! also how to set it up
http://www.pocketpcthoughts.com/forums/viewtopic.php?t=46747
http://www.azol.ru/texts/QMail3_eng_FAQ.htm
Nice!!! I finally got Qmail installed on my device. Seems like it can do a lot more than just let you view HTML-formatted email. So, how well does it compete with the native WM6 email client?
Ohh, you guys never answered me about WM6 Internet Explorer. I find that IE that comes with WM5 takes very long time to open pages, or at least - fairly slow. (Doesn't work very well in the morning when you are in a rush, and don't want to wait for your PC to start up, and whenever it's ready to connect to the internet). Many WM6 reviews say that the WM6 IE is quite faster, supports AJAX, and especially more stable. (Don't know how to explain it to you, but when scrolling too fast the web pages, especially in landscape mode, at one point all the graphics and program icons become as if shattered with black, grey, green, red, ... lines -the images corrupted, that requires soft reset.) Not sure if this is an error, or if WM6 fixes it. That's why I was thinking of overwriting my current IEMobile with the Internet Explorer that comes with WM6. Or is it hard-coded, as well as WM6 email client, into the OS?
One last question. (sorry, if I'm bothering you guys too much.) Everyone knows that IEMobile of any kind does not allow multiple tabs. And i really would have preffered some kind of a plug-in, not a separate web browser, that allows it. I tried PIEPlus, but it also adds way too many features that I don't even need (i need a browser plugin that handles it as simple as possible) that only wastes more memory, and i think, slows down the IE even more. Any idea???
Ok, I know I was asking above lots of things. So, to make it easier:
1)Does anyone know how i can speed up my internet explorer mobile?,
2)And how i can fix that occasional screen error that occurs while browsing the internet that messes up my whole PDA?
So, um, can somebody help me?
Hello! Is anyone out there?
Hey Guys,
everytime I am looking for a app on google it shows me some really nice and new fingerfriendly programs, and some old programs which ja not contemporary anymore.
So I want to make a list with all apps which are up to date and fingerfriendly, cause for me the stylus era is over.
So I want you to post every, I mean every fingerfriendly program you know (if it's possible with the downloadlink), so that I can make a list here in this thread.
Then it will be easy for everyone like me to find good and fingerfriendly programs.
spb mobile shell 3. www.spbsoftwarehouse.com
FingerSuite
http://forum.xda-developers.com/showthread.php?t=459125
ThrottleExplorer 0.1 - Finger friendly File Explorer for Windows Mobile
http://www.throttlelauncher.com/por...tleexplorer/120-comming-soon-throttleexplorer
Great idea for a post.
Here are 2:
- MaxKey for FingerKeyboard (click the link below)
- Resco Explorer
Resco explorer 2008
No download links, guys?
G-Watch
G-Alarm
G-Profile
Link: http://www.ageye.de/index.php?s=home
resco file explorer
EDITED:
F-Styla said:
Guys, thanks for helping, but make sure the app has not been posted yet and don't forget the download link
Click to expand...
Click to collapse
CLICK
Guys, thanks for helping, but make sure the app has not been posted yet and don't forget the download link