Hi All,
Could someone upload a cap for Network wizard containing all countries settings like the one found in bepe's new ROM.
Thanks in advance.
taiseer999 said:
Hi All,
Could someone upload a cap for Network wizard containing all countries settings like the one found in bepe's new ROM.
Thanks in advance.
Click to expand...
Click to collapse
YESSSSSSSSSSSSSSSS!!!!!
for me tooo!!!!!
can't remember who gave this to me.. but i think it works..
racerx_ said:
can't remember who gave this to me.. but i think it works..
Click to expand...
Click to collapse
Thanks but its not it, the one in bepe's rom is different (its an autodetecting type and it contains more countries)
hmm... i think this one does have some autodetect option...
oh well, hope you find it cause sounds good to me too haha..
taiseer999 said:
Thanks but its not it, the one in bepe's rom is different (its an autodetecting type and it contains more countries)
Click to expand...
Click to collapse
the same for me
i need lithuanian operators
Found attached thanks to its right
taiseer999 said:
Found attached thanks to its right
Click to expand...
Click to collapse
you are welcome bro
hi
can anyone tell me how can i edit network wizard to contain more countries?
i'm in romania and romania is not in the list. i have a cab with all the connections made for Orange RO. can someone include it in wizard?
thanks
nobody knows?
World Network Wizard - not for P3600i?
Hi. Me new here, so pls be a little more patient for a while! )
After happily getting myself this new P3600i WM6 Eng toy, I set in the SIM and discovered that the Asian Network Wizard says my operator is not supported (I am in Europe). At the same time it does let me call and receive calls, although shows me in roaming (with no roaming charges so far.
I did not find the way to add countries and operators to the lists in that asian NW, so started looking for the European NW patch. Thanks to ron1004 and taiseer, I got "world network wizard" cab, but it does not seem to work: when installing, it mentions that it may not show up properly since it was made for the previous version of the sw (not exactly the citation, but smth similar). After the installation the original NW is not replaced and I see no other program icon that would enable me change my country/operator.
Is there any solution to that?
The unit has (all factory installed):
ROM 3.00.707.17 dated 06/29/07
radio 1.46.00.11
protocol 32.79.7020.19H
PS: HTC support is absolute sh.t: their new site shows no sw for the p3600i their hotline keeps footballing (me) from Aussi to HK to European locales, their emails do not reach me on either of my emails!
Related
Has anyone tried this yet, One of my friends got it last night form a friend in T-Mobile its ment to be the latest Beta for T-Mobile but it contains a proper BT stack.
Has anyone heard anything about it?
when i get it tonight i will of corse post it here
John
I have not tried it because I don't know where to download it...
Can you give us a link...?
Thanks
Panja
my friend will email it to me tonight and i will post it here, I am pleased that you know of it, do you know how good the new BT stack is ment to be ( what new profiles have been added)
John
Hey John,
I don't know.
Nice you're going to post it!
Thanks in advance
here is the file, i have not tried it yet,
Please let us know how you get on with it
john
Sweet! Downloading right now
I am getting Country ID error when I am trying to install it
As per my usual request...
If anyone DOES manage to get it installed, can they run Cleartype and see if it is 'GOOD' Cleartype, like the O2 ROMS, or useless, garbled and coloury Cleartype, as per the Orange ROMS please?
As for the Country Code error, is it a T-Mobile or UK device you are installing on?
if not, you'll need to edit the nbf files for the correct country.
How to edit those files? TIA
NBF files are passworded, can't seem to open them in editor
ID64 said:
I am getting Country ID error when I am trying to install it
Click to expand...
Click to collapse
Follow this guide for switching roms.
http://forum.xda-developers.com/viewtopic.php?t=8205
applecom
Thanks for posting.
Panja said:
ID64 said:
I am getting Country ID error when I am trying to install it
Click to expand...
Click to collapse
Follow this guide for switching roms.
http://forum.xda-developers.com/viewtopic.php?t=8205
applecom
Thanks for posting.
Click to expand...
Click to collapse
Sorry probably it wont work because this T-Mobile roms comes with HimaUpgradeUt.exe version 1.1.0.0...
Mental block Not working for me, prolly too hot today If anyone cold post modified nbf's for FIDO network I'll really appreciate it.
TIA
the rom attached works perfectly
use ER2003Edit to unlock the nbf files
it's the fastest rom i've ever installed on my mdaII!
the 3 files included are:
rom 1.72
radio 1.12
extrom 1.72.04
sorry to be a dumb newbie, but can this work on an O2 UK XDA II? i dont need a walkthrough just a point in the right diretion
Thanks
pablo said:
the rom attached works perfectly
use ER2003Edit to unlock the nbf files
it's the fastest rom i've ever installed on my mdaII!
the 3 files included are:
rom 1.72
radio 1.12
extrom 1.72.04
Click to expand...
Click to collapse
ER2003Edit gives me errors- ERROR ACESSING IMAGE FILES when try to open ROM, however I can change country, but still getting Country error when I am trying to load them. :roll:
use the latest version of ER2003Edit and these password to unlock the 3 files
ms_.nbf 0x20040305
NK.nbf 0x20040304
radio_.nbf 0x20040306
Finally, changed nbf files etc, loading was in prgress and then - AGAIN WRONG COUNTRY CODE! How it stucked in Bootloader screen! Arghhh... Help
Phew! Fixed. Loading image now 21% done
Hi ID 64 what is your country ID ?
me I have a french Qtel 2020 with now the WWE 1.66 rom.
I have now the country error with the 1.72.
How you fix it ?
thanks
If you want Information and support, please go here:
forum.xda-developers.com/showthread.php?t=283594
Look in the first Posting of this thread.
Look in the first post of this thread.
Look forward to seeing the new release, and keen to see if the 'phone' issues some of us are experiencing are fixed / not there.
Thanks Ivan
Re: AKU3.2 Rom for Universal
Lt.Cmdr.Ivan said:
Bugs2 known WIFI)
WIFI error1 (1 user reported it)
Universal goes to standby mode with Wi-Fi turned on, then I switch the device on, and it starts trying to register in Wi-Fi net forever (shows "tower" but without circle and rays)
WIFI error2 (1 user reported it)
Sometimes when I close Comm Manager device draws only upper part of screen and hangs, but if you wait for about half minute, it returns to life
Click to expand...
Click to collapse
I have this errors too...
Can i fix this or wait for next beta?
New Beta 8
Hi Ivan
I see a Beta8 with today's date on it, is that the new ROM????
No its just the beta8 repacked and reuploaded, because the rar on the ftp wasn't accurately packed.
...just to be in the thread.
:wink:
for info:
at the under side of the page is a link, click to warch or stop watching this thread.... :wink:
Save contact to SIM
I'm using rc1.
Contacts/tapping any contact/Menu/Save to SIM. The last item namely "Save to SIM" is not available (grey color, not black). Looks it's necessary to change a value somewhere in registry, but I did not manage to find what and where.
Does some1 face such problem? Or there is a solution the problem? Does this bug exists in beta8?
Thx in advance
[edit]
yes, "Save to SIM" is active and works.
hi Ivan
it will hang up when synchronizing with pc some times,and will show cannot get IP from server.I use beta 8.
We want the new rom! We want the new rom !
geovass said:
We want the new rom! We want the new rom !
Click to expand...
Click to collapse
YES, YES, YES !!
Cheers
hrb
2s to universal
Hi Ivan,
I back with you! Also upgraded from 2s to universal. Will try beta 8 on weekend. Anything to watch out for as I do also use the unit for live work...
Regards,
Simon
Hi! I used the beta 6 with pleasure ;-) But now i switched back to the qtek rom - i need a german ROM. I hope ther will be a german release.
Greetings Flo
did anybody try the *ARM*CAB? (BTP). I've downloaded it, the BT manager has changed but when I search for the Universal's services on my notebook, I get only the same 3 services az before...
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
alexei said:
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
Click to expand...
Click to collapse
You have to use MupgradeNoid.exe
Lt.Cmdr.Ivan said:
Perfectly functioning VGA Mode (regarding to some users)
http://www.jaml.com/MvRTrueVGA/
If you have this problem:
GPRS is connected but the icon is stuck in a loop showing it trying to connect
go here:
http://forum.xda-developers.com/viewtopic.php?t=34995
************************************************************
************************************************************
Aku3.2 compatibility list:
Working
ClearVue 2.3
GSplayer 2.25
ScummVM 0.8 and 0.9
TomTom 5.21
Not working
Blackberry Connect
Special Thanks to
Mamaich
Thanks to
Bepe and friends for his Rom kitchen (This is definitely perfect)
bbs.pdafans.org (For their Rom)
Xda-developers (Knowledge and tools)
Buzzdev.net (Knowledge and tools)
Tuatara (Special tips and tools)
Sub69 (network settings for aku3.2 beta3 and 4 as testing for pushmail)
baudy2 (for compatability of the BB client)
All People submitting programs to working or non working list.
All the testers out there.
All i forgot
Click to expand...
Click to collapse
Hi there i have a m2000 running helmis 1.3.2 wm5 unlocked on vodafone , having no memory card i couldnt follow the instructions for the extrom folder so was wondering how i can setup my gprs and mms etc for use on vodafone (UK if that helps) , i did try but i keep getting "the ansewring modem has disconnected"
can someone help me?
pleeeaaasse
anyone? plz a how to would do , i got the settings here http://www.mphone.co.uk/mms_wap_settings_vodafone.html
thought about the vodaphone site
http://online.vodafone.co.uk/dispat...&_pageLabel=Page_BOS_PDA_Guide&pageID=GM_0302
Not sure what the settings are like on WM5 but the menus cant be that different.
that seems completely different to me :/ , cheers for responding though
roy8846 said:
anyone? plz a how to would do , i got the settings here http://www.mphone.co.uk/mms_wap_settings_vodafone.html
Click to expand...
Click to collapse
My guess is that you could use the UK T-Mobile cab's for GPRS & MMS and then just change access points, password etc for Vodaphone. I assume you have the T-Mobile cab's.
i dont have t-mobile cabs no (just used search , came up with allsorts )
roy8846 said:
i dont have t-mobile cabs no (just used search , came up with allsorts )
Click to expand...
Click to collapse
Do you mean you searched your local machine or the internet?
In the EXTROM directory of Helmi's ROM directory is a subdirectory called Operator. Use UK_T-Mobile_MMS.cab for MMS and then edit to Vodaphone. For GPRS I suggest Vodafone_GPRS.cab.
I am with T-Mobile and I had to search around a bit for MMS & GPRS when I flashed the Helmi ROM. I think the instructions relating to EXTROM are a bit vague.
Hope this helps.
ahh , so they will configure on their own? wow cheers , yes i have these in the extrom folder , i was searching the site
It is supposedly out, and in Russian, but with US/UK ENglish
This rom is in russian, right?
jsp_m said:
I will flash and upload tomorrow
file is named
RUU_Excalibur_HTC_RUS_1.24.411.1_4.1.13.44_02.94.90_Ship.exe
Click to expand...
Click to collapse
awesome!!!
damn invalid model ID, I cant flash it, I'm not cid free...
anyone up for a unlock donation?
yrs, its russian, but guess it always has at least english inside
jsp_m said:
damn invalid model ID, I cant flash it, I'm not cid free...
anyone up for a unlock donation?
yrs, its Russian, but guess it always has at least English inside
Click to expand...
Click to collapse
i haven't tried this, but it might work...
http://forum.xda-developers.com/showpost.php?p=1047462&postcount=1
Its russian so not really much use. We need one that says WWE (world wide english).
Not true. One can switch language from Russian to US english. Please share this rom. Thank you!
[someone please provide link]
ENJOY!!!
Thank you I will try this on my HTC S620
jsp_m said:
damn invalid model ID, I cant flash it, I'm not cid free...
anyone up for a unlock donation?
Click to expand...
Click to collapse
How did you get around the "invalid model ID"?
Did the trick with pof's SPL 1.11 work as suggested by johnnylavah?
Or did you just spend money to IMEI check?
It certailnly worked on my non-supercided HTC S620. If your device is HTC S620 regardles or the OS language it will likely accept update.no supercidding is required. DASH handsets would likely require CID unlocking for this upgrade to work.
1. run bootloader upgrade ( well, downgrade) first
2. run rom updater
This is "IU BUILD. TEST ONLY!" ROM.
Anyways...to get your English back after the ROM is upgraded:
Start --> Settings (Настройка) --> press 7 --> press5:
now, in the top most combo box (Кодировка) :
select UK or US English and press left soft button to confirm
in the next combo box select 3rd from the top entry: English Australia (Английский Австралия) and press left soft button to confirm
now, press left soft button 4 times to confrim that changes will become effective after soft reset.
At this stage you may power cycle you Excalibur
CE OS 5.2.1238 (Build 17745.0.2.3)
Radio: 4.1.13.44_02.94.90
Model Name HTC-S620
P.S. You do not need to do anything about QWERTY keyboard layout. It's just plain standard QWERTY after the language settings are applied.
And just in case if you do not like default green colour of the home screen, there is one called WIndows Default available that looks a bit more attractive to me
johnnylavah said:
i haven't tried this, but it might work...
http://forum.xda-developers.com/showpost.php?p=1047462&postcount=1
Click to expand...
Click to collapse
I could not update the new rom ERROR[294] invalid vendor ID,also bootloader did not work also
SecureGSM said:
This is "IU BUILD. TEST ONLY!" ROM.
Click to expand...
Click to collapse
So, just another beta ROM...
Nevertheless it's good to know that HTC is still working/testing WM6 for S620! Hope the final version will appear soon!
Dang - No go for my UK S620 either :-(
Is this an original HTC ROM without any branding?
Are there many differences to the T-Mobile WM6 (exept for the branding)?
Yes, original HTC, no extra branding. no extra bloatware. This ROM is very different to T-Mo DASH WM6 ROM. Much, much better this one. Great improvements accross the board.
Is it possible to go back to the WM5 ROM if the WM6 doesn't work out? If so how do you do that?
Upgraded fine S620 WM5 -> WM6
Hi all.
I have just upgraded from from WM5 on a CID unlocked S620 and all seems to be working fine.
Getting out of Russian is a little tricky, but following the steps in this thread worked fine.
TomTom works (as well as it ever has on WM5/6), UK Vodafone GPRS works, Hotmail and Exchange email working, Google Maps runs OK.
No obvious issues or bugs so far.
General performance seems to be comparable to the last WM5 ROM.
Cheers,
John
ahhh ! i tried it too - i have a htc s621 from rogers so i'm guessing it's because it's not CID unlocked? it says ERROR [294] Invalid Vender ID -any fix to this?
securegsm, can you help us out - the ones who are getting the error, my phone's app unlocked but it's locked to rogers. i tried 2 times but i keep getting the same error. how did you get around this? is your phone unlocked already or it's locked to some provider - if it is, how'd you get around the invalid id? i tried it - it didn't work for me
I currently use the official HTC Asia (Dopod) WM6 ROM, ver. 3.7.707.1. It has Infinitiq Solutions Network Wizard ver. 2.16.12, auto-installed from Extended ROM, but certainly with settings for the South-East Asian providers only.
Would someone help me and upload a .dat file with the European providers? (my one is T-Mobile Hungary). I guess the settings are stored in 'Windows\netwiz.dat'.
Thanks in advance!
Anybody has a proper netwiz.dat file?
on my device (B&B4.1) i can't find the dat-file, but somewhere here on xda i found the network wizard with european providers, no idea where i found...
Maybe this will help you ? Never tried on my own because in the roms that i use it's always included, so i never had to use...
there's a readme inside the zip. Hope, this will help you...
Cheers, Peter
View attachment HTC_NetworkWizard_EuropeProviders.zip
Here the one that you can install: http://rapidshare.com/files/52955931/JUVS_HTC_Network_Wizard_KAISER_1_0_29981_1.cab
I use it and it works.
petervbeck said:
on my device (B&B4.1) i can't find the dat-file, but somewhere here on xda i found the network wizard with european providers, no idea where i found...
Click to expand...
Click to collapse
data file: provision.zip, password protected
mr.valacky said:
data file: provision.zip, password protected
Click to expand...
Click to collapse
pass: 1234
petervbeck, NikMel,
thanks for the files!
So, it seems to me so far that I can only get the settings of European providers if I change the whole program, because there is no European dat file avaible and compatible with my version of Network Wizard.
cheers
ctibor said:
petervbeck, NikMel,
thanks for the files!
So, it seems to me so far that I can only get the settings of European providers if I change the whole program, because there is no European dat file avaible and compatible with my version of Network Wizard.
cheers
Click to expand...
Click to collapse
ctibor: go to http://pdaplus.info/smf/index.php?topic=631.0
aztán folytassuk ott magyarul
sorry my englis is poor