Windows mobile 6 support bluetooth keyboard ? - 8525, TyTN, MDA Vario II, JasJam ROM Development

somebody know if Windows mobile 6 support bluetooth keyboard ?
anybody test any bluetooh keyboard with a cingular 8525 and windows mobile 6 ?
sorry for my English is not my native language.

I use the Stowaway BT keyboard with my 8525 everyday. You have to use their propietary drivers for best results, though. It has worked with every version of Schap's ROM since the last Ice Age.
J

Related

XDA IIs - compatible bluetooth foldaway keyboard

hello
i am close to purchasing the O2 XDA IIs, but want to be sure that i can purchase with it a compatible foldaway keyboard.
O2 in singapore (i'm in australia) tell me that the keyboards for the O2 XDA II are not compatible with the IIs
they tell me, however, that any 1.1 bluetooth compatible keyboard should work with the O2 XDA IIs
however, they weren't prepared to recommend any such keyboards, and counselled me strongly to test any potential keyboard with the device before purchasing
the sales people here in canberra have recommended an hp Bluetooth Folding Keyboard Manu Part no: FA287A
but they're not prepared to let me test it without buying.
my questions:
1. if you are using a foldaway keyboard (bluetooth or otherwise) successfully with the O2 XDA IIs, what keyboard is that?
2. will the hp Bluetooth Folding Keyboard Manu Part no: FA287A work with the O2 XDA IIs.
i look forward to your advice
thanks
ric
The Bluetooth Keyboard like this Freedom Keyboard requires PDA specific drivers, but the Stowaway Bluetooth Keyboard works on HID driver bluetooth setting so this one should work with XDA IIs. I belive the HP keyboard is actually manufacutured by Thinkoutside (stowaway). If this is the case than it should also use the HID interface and should work with your XDA, although I have no experience of this.
I am using ThinkOutside BT Keyboard with XDAIIs, it works properly ... download driver same as for XDAmini (1.570Kb) ..follow the instruction ..and works.
Budi HS
Indonesia
XDAIIs BT ver 1.0.0 Build 3500
works fine also with BT GPS EMTAC/CarPC
Hi,
I also have a stowaway keyboard with the additional HID-Profil working. But because it is a German keyboard layout I want to use the thinkoutside driver again. But it causes conflicts.
Can somene please tell me how I get rid again of the HID-Profil and maybe the Quality-Audio-Profil if neccessary.
Thank You very much
Never mind!
My XDA performed a hard reset on its own yesterday night! :-(

help with Stowaway bluetooth keyboard and gsmart i300 wm6

hmm this is strange, using the software/driver i can not see the keyboard, if i use the OS BT i can connect and i have basic keyboard functions i do not get the special keys to function which is critical, like ok/X and so on...
I do not know what BT stack gigabyte gsmart i300 (running wm6) has? it supports bt 2.0 with stereo... but the stack is??
also at the moment i could use some third party application that emulates maybe a keyboard to a fuller extent, or mapping program of keyboard or keys, were maybe i could map those keyboard function combo's to the applications virtual keyboard or phone buttons
Any help would be greatly appreciated
In the Stowaway driver-applet, there's an option to disable the native OS HID drivers, so the Stowaway driver can take over control.
Got mine working perfectly under WM6
Moaske said:
In the Stowaway driver-applet, there's an option to disable the native OS HID drivers, so the Stowaway driver can take over control.
Got mine working perfectly under WM6
Click to expand...
Click to collapse
ya the problem was i think driver... not sure if the default archived 4.0 works but hte 4.52 that comes for other devices or almost all PPC does have that option and i did try it and it does work perfectly!!

Stowaway (IR) Keyboard problem

'm using my infrared Stowaway keyboard frequently, because you can type fast . I have been using it with all versions of wm 6 that I have installed until now. Now with wm 6.1 I have big problems, because this keyboard causes my prophet to hang. I like to know if other people have the same problem or found a solution. What is so different between 6.0 and 6.1 that causes my keyboard stops working?
Any answer will be appreciated and any solution even more!

how to get Stowaway BT driver work with WM6

I'm using HTC Trinity WM6 and wish to use my old Stowaway universal Bluetooth keyboard working? i cannot find driver for WM6. anyone have it?
please help!! i love my BT keyboard and wish to get it work again.
thanks
Attached is the driver I use for my Kaiser WM6/6.1, dunno if it'll work on your Trinity or not.
If not here is the drivers page: http://corporate.igo.com/support/Drivers.asp. Just choose your manufacturer and model.
Note that WM6 comes with basic keyboard drivers -- you only need to install a driver if you want to use special functionality such as customized keys. I use the built-in drivers on my Kaiser with a BT keyboard (not the Stowaway, but supposedly compatible).
htc tytn II and sierra bt keyboard
everybody,
trying to connect / use my new sierra bt keyboard with my htc tytn II and nothing works,.... if i go through the htc the keyboard is detected, asks for a security code, does not recognise the one i put in, (although the instructions say pick one of your choice), and does not connect.
if i go through the keyboard CAB installed on the htc, still cannot connect,.... i am not exactly a 'newbie' but if someone could give a step by step direction on how to get this to work, i would be very grateful,....
thanks,
ek
sorry everyone, i used elyspar's CAB file on my htc tytn II,.... thanks for your help,....ek
found a vid on youtube very helpful,.... it's actually quite simple to connect, so maybe i need to retract, i am a newbie,....
here's the link, http://www.youtube.com/watch?v=P8HAge9yJu4
no functionality though, just basic input, good for emails / word, but limited,....
guess i have to install the driver on my kaiser somehow,....
Hi everybody, can you tell me which driver i have to install for my Niki? It's not on the list...
Thank you very much.
ekacz24 said:
everybody,
trying to connect / use my new sierra bt keyboard with my htc tytn II and nothing works,.... if i go through the htc the keyboard is detected, asks for a security code, does not recognise the one i put in, (although the instructions say pick one of your choice), and does not connect.
if i go through the keyboard CAB installed on the htc, still cannot connect,.... i am not exactly a 'newbie' but if someone could give a step by step direction on how to get this to work, i would be very grateful,....
thanks,
ek
Click to expand...
Click to collapse
I could use an Apple Alu BT KB with HTC TyTN (not II). Paired. Without any special driver. Remember to press Enter on the KB after the code. Now I have a new Touch HD and I get it paired but nothing happens clicking on the keyboard...
I will start installing drivers which I find here suggested and will report.
iGo stowaway BT keyboard and WM6
Hello all,
I originally posted this message in a Blackstone forum, but as this problem probably relates to WM6 in general I thought I would post here
I have an igo bluetooth keyboard and I am using Blackstone phone (running the usual WM6.1 proffessional. I installed the igo software and everything worked fine except that phone crashed a lot. Not so useful. I then uninstalled the software and paired the keyboard using the onboard Bluetooth keyboard drivers. All worked well for one run through and I was able to type away. However I have not got the thing to work again since, even after re-pairing the devices. Does anyone haev any thoughts about what I might be doing wrong?
Thanks.
Tom
Hello Guys, partly not to the topic hear....
I have an igo stowaway keyboard and a travel mouse and i have been using them with my fusi n560 (wm 6.0). Now I bought a Nokia 5800 mobile phone with symbian s60v3 touch. The keyboard came with multiple driver including both wm and symbian versions, but the mause came only with wm driver. Now the question is: do you happen to know how could I use my mouse with my symbian device? Sorry for asking symbian related question here....
Special Characters and the Sierra Stowaway
I have previously used the Sierra Bluetooth Keyboard and it worked flawlessly on my T-Mobile Wing running WM5... I recently tried to port the same driver suggested by ek... (PPC5) to the T-Mobile HTC Touch Pro2, WM6.1.
It works on all keys, including the function keys, but cannot produce the specialty characters on the 5th, number-row, i.e., [email protected]#$%^&*()
Everything else seems to work fine... anybody come across a fix for this?
Thanks!
JSS
I've been interested in acquiring an Apple Wireless Keyboard for my PDA too.
But from skimming other people's post, looking at what was successful on the internet (e.g. the guy on youtube with the Mio who paired with the Apple BT Keyboard), it seems that all the success stories come from people running WM5/6
Anything 6.1 and above seems to not work in general, although you have some success stories like from http://forum.xda-developers.com/showthread.php?t=486595
Has anyone successfully paired with 6.1-6.5?
jstapley said:
I have previously used the Sierra Bluetooth Keyboard and it worked flawlessly on my T-Mobile Wing running WM5... I recently tried to port the same driver suggested by ek... (PPC5) to the T-Mobile HTC Touch Pro2, WM6.1.
It works on all keys, including the function keys, but cannot produce the specialty characters on the 5th, number-row, i.e., [email protected]#$%^&*()
Everything else seems to work fine... anybody come across a fix for this?
Thanks!
JSS
Click to expand...
Click to collapse
I have similar problems with my Samsung Omnia, WM6.1 and the German Stowaway Keyboard (QWERTZ) with the driver 4.51.
Just the keys !$& are not working.
Could there be a workaround like using ASCI numbers?
I tried ALT+33 to get a "!" but had no success.
Does anybody else has some suggestions?
Thanks,
Sigi
sigi-s said:
I have similar problems with my Samsung Omnia, WM6.1 and the German Stowaway Keyboard (QWERTZ) with the driver 4.51.
Just the keys !$& are not working.
Could there be a workaround like using ASCI numbers?
I tried ALT+33 to get a "!" but had no success.
Does anybody else has some suggestions?
Thanks,
Sigi
Click to expand...
Click to collapse
I solved my problem:
I installed the English driver 4.52
(I have an English ROM and use a German Keyboard)
The driver was changed from version Ger4.51 to Eng4.52 on several places and I think they solved some Bugs.
I resetted my Omnia after the installation.
Because the problem still existed, I resetted the Omnia once again, while the Stowaway keyboard was selected in the keyboard menu.
After that reset all the characters worked like the should.
Hope that helps.

Bluetooth DUN on HTC S620?

Hey guys,
recently I upgraded my good old S620 from WM5 to WM6.1 (I am using the one from Ricky an Kavana at the moment).
But I noticed, that the "lovely" guys at Microsoft decided to kick off Bluetooth DUN and only support Bluetooth PAN on this device. My notebook is running on Linux and I am to stupid to get a working PAN connection or at least a program running that supports PAN connections.
So is there any way to get back to the good old DUN on T-Mobile Dash?

Categories

Resources