I have a problem on my HTC P3300, the vibrate doesn't working!!!
Mode vibrate, ring and vibrate, and other!!!
I test to hard reset and the vibrate work, a program can shut the vibrate???
can you help me???
thanks all
Dem36
that's oki
After the hard reset I reinstall my backup and the vibrate work very good
it's starnge, no?????????
Related
how to hardreset load the default settings urgent need help
power + record +camera THEN reset .... Try that never reset the xda2
just restart
anyone know how
urgent need help
Read the "Microsoft Windows Mobile Version 5.0 I can share" topic. There is a method to hardreser WM2005.
WM2005 Hard Reset
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options(no backlight).
1 Kit = YES ------------------ change this to NO
2 Register Hive= No ---------should remain NO
3 Storage = No --------------change this to YES
after this press the big round button between the call and call end buttons to SAVE. Device Restart, then wait.
You have successfully hard reset your PPC.
Re: WM2005 Hard Reset
I'll explain this menu.
1. Enables the debugging mode of WM2005. I have not played with that, it needs PlatformBuilder to be installed on PC.
2. Clears the registry hives to their default values. I have not tested that, but it should work like hardreset but will keep all modified files.
3. Format the storage. This would also reset the registry because it is contained on storage. Similar to hardreset in previous OSes.
It is rather difficult to press all these buttons without someone's help.
easy
easy... :roll:
:arrow: put the xdall in the table, insert the stylus in reset sw then make your belly or your stomach or whatever to support/push it,
:arrow: left hand hold the on/off sw and record sw
:arrow: and right hand thumb pressing the camera sw and the same time hold or support the device
:arrow: then push it all and count to ten....
hahahaha...just like you are going to acrobatic position.
But i did that.
Yesterday I installed the following .cab on my wizard:
http://www.pocketpcfreewares.com/en/index.php?soft=1137
When I finished the insallation my qtek was freezed. And it did not function any more....
I really want to do a hard reset but my phone can't connect to active sync anymore....
Does anyone have a solution for this problem???
Thank you in advance.....
If the device wont boot any more, the only thing you can really do is a full reset.
I assume you've already tried a reset?
That is the problem.... my device cant connect to active sync aymore... and I dont know another way to do a full reset...
You should have the clearstorage program on your phone. Run that, and it'll hard reset you. There's a button combination as well to do the same, but I don't have a wizard to tell you it. Check the wiki or use search.
V
- Switch off your device
- Press and hold the Comm Manager and Voice Dial button
- Switch on your device (while holding those 2 buttons)
- Press the Send (green button) key to give it a hard-reset.
Good luck.
Hi All I Really Need Some Help Please My Phone Wont Turn On Its Stuck On Starp Up Boot Screen.,which Means There For I Cant Reset It.and Active Synce Doesnt Reconise The Phone So I Cant Even Install A New Rom On It,iv Presses The Reset Button Loads Of Time With No Joy Can Anyone Help Me Out Please...thanx It Was Working Fine One Day Then Froze On Me And Now It Wont Come On To Windows
Copied from the Wiki page.......
Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot
(The L/R soft keys are the "--" keys just above the the Green phone and Red phone buttons) You can also use clear storage in settings. WARNING!!! HARD RESETTING WILL ERASE EVERYTHING ON YOUR DEVICE. MAKE SURE YOU HAVE A BACKUP!
ok thank you
will try it now ,,but phone is totally stuck on start up screen wont even go in to windows,,but will give it a go ,,cheers...
hi there
thanx allot for your help it did work and managed to reset the phone cheers...your a life saver thanx ....
There is a reset button, but only for soft reset i think. Any code to do factory reset for this phone yet?
have you tried 1234
i'm not asking for help to guessing the code. I need help identify the secrete buttons combination to be able to get to the dial pad to enter factory reset code. Or if there are any other method since this one has WM OS.
Yes! you go to start>settings>ststem>clear storage
then enter 1234 and will be promted to clear phone memory as if it was factory reset.
jasond said:
Yes! you go to start>settings>ststem>clear storage
then enter 1234 and will be promted to clear phone memory as if it was factory reset.
Click to expand...
Click to collapse
What if I can't get access to the phone?
I have one that I brought yesterday but it has a lock code.
Is there a way to bypass it or reset it?
Hard reset?
Flash?
Thanks
Hold down the Camara + Volume Down + End Phone Call (Power Off) Button all at the same time...
What if the phone is in "Emergency Download" mode? I hit the keys for this to update the Incite but the program from LG didn't work. Now the phone is stuck in this mode. I pulled the battery, pressed the power button, still says emergency download. Tried the hard reset key presses, still says it. Crappy LG.....
When you pulled the battery, was the phone plugged in?
Hi, i need know how to do a hard reset, because i put a password, but i forgot it, can you help me???
I can enter in download mode (hold-green-red) but no in emergency mode(v down-hold-red) :-(
Help me pleaseee
thank you
gracias
Indnplyboy said:
Hold down the Camara + Volume Down + End Phone Call (Power Off) Button all at the same time...
Click to expand...
Click to collapse
gracias por el truco...
I need to send my phone in for repair but want to factory reset it first.
LCD cracked after a drop so I can't see ANYTHING on the screen, this is what is happening when I try reset:
1. Remove & replace battery
2. Hold volume down, then press Power whilst holding
3. Four seconds later release volume down
4. Press volume down
5. Press power button (Phone then vibrates briefly)
6. Press Volume Up
7. Wait for reboot....
Problem is that the phone doesn't seem to reboot no matter how long I wait (I never hear the start-up sound/no buttons become active.)!
I have WaveSecure installed, so I did a remote Backup to check if the phone had been reset but it hadn't, I still had data on there!! I have no performed a Remote Wipe with WaveSecure but I don't know if it deletes things like Saved Passwords from the browser!
I'm running the stock HTC 2.1.
Any help is appreciated, I really need to get the hard reset working!
Thanks!
Got it working
Not sure what I did but I kept trying it over and over and when I booted the phone and tried phoning it I realised the ringtone was back to default, so I did eventually get the hard reset working!