Last night I decided to upgrade to 6.1 then flash Dutty's Rom. But whenever the device goes into bootloader mode WMDC gets disconnected and the flash can't continue.
I simply do a Soft Rest and everything is back to normal. I can Sync without any problems. Any ideas?
allan1 said:
Last night I decided to upgrade to 6.1 then flash Dutty's Rom. But whenever the device goes into bootloader mode WMDC gets disconnected and the flash can't continue.
I simply do a Soft Rest and everything is back to normal. I can Sync without any problems. Any ideas?
Click to expand...
Click to collapse
This is normal, if your device goes to boot loader, WMDC and ActiveSync disconnect and the system uses other USB driver to allow the flash to go. Take a look at device manager and see if there are one called HTC USB.... or samethink like that.
Can you post more datails about SPL, ROM version, etc...
I flashed Dutty's Rom a few days ago and have been having a few problems so I wanted to flash another. The IPL 1.04 and SPL 2.10 are fine. One thing I did notice was everytime I begin the device asks me if I trust this program. I haven't sen this before so it must be something on the Rom.
allan1 said:
I flashed Dutty's Rom a few days ago and have been having a few problems so I wanted to flash another. The IPL 1.04 and SPL 2.10 are fine. One thing I did notice was everytime I begin the device asks me if I trust this program. I haven't sen this before so it must be something on the Rom.
Click to expand...
Click to collapse
This can be caused by the SSPL choice in the CustomRUU. Try to choose only 2.10 and HardSPL, the SSPL option don't work right all the times in my Vista...
ok I flashed Schaps Rom and all going well. Like I said, it must be something with Dutty's Rom. Thanks for the help.
Related
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
I have a different device(ipaq hx2490b pocket pc without phone) but exactly the same broblem.
Any help will be appreciated.
Try this........
magicbullet said:
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
Click to expand...
Click to collapse
Hi.
Extract the zip file and copy the exe onto your device. ActiveSync your device to the desktop. Run the exe file via file explorer to put your device into a "safe bootloader" state.
Run the ROM of your choice.
I always run this file before installing any rom even though I initially Super CID my device. Having said this, most custom roms have the option to force SSPL before running the ROM. Select this option if prompted.
Rename the rom HERMIMG.NBH, stick it on your SD card, soft reset to the bootloader and flash from there. Quicker and more reliable in my experience.
magicbullet said:
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
Click to expand...
Click to collapse
is your PDA still on 4 color screen ? than you may need a entire diffrent procedure to flash
Everything was fine, I was just browsing for wireless connections and then I've done a softreset and to my surprise it went into bootloader mode, and now whatever I do (softreset, remove battery, hard reset) it goes immediately in the bootloader mode and I can't boot windows.
I am running SPL 2.10 Olipro IPL 1.04.
Not sure if this is relevant at all, but I am running Schap's 4.31.
Any ideas?
Thanks
read the wiki
since youre hard spl you can flash the rom again. jsut run the ruu and select 2.10 and select hard spl, dont auto-detect,go through the steps and it will flash
Hmmm try reinstalling 4.31 or any other ROM again to see if it works!
Tried that already. I have tried the same ROM again (schaps 4.31), and tried the t mobile official ROM (WM6). they didn't change anything, it flashed the rom to the end and then after the reboot it goes back to the bootloader and can't get off it. I have tried the phone's original ROM which was WM5 but I couldn't do that (doesn't flash it, it says the phone is not available, maybe because it's in bootloader and it doesn't connect to activesync).
The strange thing is that overnight I left the phone off and this morning it did boot into windows (this was on the official t mobile WM6 rom) and went as far as running the custom network settings, but then after the restart it went back to bootloader and now it's back, can't get out of it.
Any ideas?
oooo
im having the very same prob
official wm6 from t-mob (UK) upgrade from WM5 that came with the hermes.
now i cnt get outta boot load.
check out my fight to bash the brick back in to its senses...
http://forum.xda-developers.com/showthread.php?t=361323
If anyone can help give my phone CPR - please do.
serializable said:
Tried that already. I have tried the same ROM again (schaps 4.31), and tried the t mobile official ROM (WM6). they didn't change anything, it flashed the rom to the end and then after the reboot it goes back to the bootloader and can't get off it. I have tried the phone's original ROM which was WM5 but I couldn't do that (doesn't flash it, it says the phone is not available, maybe because it's in bootloader and it doesn't connect to activesync).
The strange thing is that overnight I left the phone off and this morning it did boot into windows (this was on the official t mobile WM6 rom) and went as far as running the custom network settings, but then after the restart it went back to bootloader and now it's back, can't get out of it.
Any ideas?
Click to expand...
Click to collapse
Run mtty and try to see if there is bad NAND blocks on the device, to do that run 'info 8' which will report if bad blocks exist. If they do (there should be 3 bad blocks on a normal device, ignore them) then run 'task 2a' which should sort out bad blocks, then flash a new ROM.
EDIT:: Always look at the Hermes Unbricking Thread aswell.
Ok, thanks mr vanx. I'll try that.
Here's a quick update: it would appear that after it is off for a while (about 30 mins, without the battery) it boots into windows, but then after any restart it goes back stuck in the bootloader. Does this mean anything to anybody?
Brilliant
mrvanx said:
Run mtty and try to see if there is bad NAND blocks on the device, to do that run 'info 8' which will report if bad blocks exist. If they do (there should be 3 bad blocks on a normal device, ignore them) then run 'task 2a' which should sort out bad blocks, then flash a new ROM.
Click to expand...
Click to collapse
Thank you ! That fixed it.
Brilliant!
Out of curiosity, what does set 14 0 do? (as stated here: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem4)
serializable said:
Thank you ! That fixed it.
Brilliant!
Out of curiosity, what does set 14 0 do? (as stated here: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem4)
Click to expand...
Click to collapse
Sweet stuff, glad that worked
set 14 0 i presume is a standard bad NAND command or something, thankfully in HardSPL olipro enabled checking and fixing of bad blocks.
Have fun with your Hermes again
Thank you
mrvanx said:
Sweet stuff, glad that worked
set 14 0 i presume is a standard bad NAND command or something, thankfully in HardSPL olipro enabled checking and fixing of bad blocks.
Have fun with your Hermes again
Click to expand...
Click to collapse
Cheers mate, I sure will !
This was like reading a good book with a very happy ending.
I feel all warm and fuzzy inside.
stuck in HTC splash screen ..Help!
HI guys ,
I have been following the forum from a long time ..... so before i proceed .... i would like to acknowledge all the great work the guys r doin out here !!..
was working on a friends jasjam which had schaps 4.20 running ... due to some issuses ( screen going blank white )with schaps' ROM , was trying to flash K's 1.30b .... the flashing froze midway .... after that could only see the bootloader for a couple of days .... used the mtty method to recover ... but now i am stuck with the first splashscreen and it doesn't budge from there.....
Would really like some advice here guys
Hi,
I am using Vista and Windows Mobile Device. I have recently flashed to latest win mobile 6 from Dopod. However, now when i tried to hardSPL my 838pro, everything went smoothly, in the hardspl it is able to detect the spl version of my 838pro and everything. but after I select the update that I want to make to 838pro, it restarts, and then it will have a screen:
"verifying information from phone" something like this and my 838pro will show the 3 color screen.. right after that, my phone will just be in that state, showing "USB" on its screen.
Anyone can advise?
disconnect your phone from the pc, then put it into bootloader mode (if you don't know how - look in the wiki), once you have it at the tricolor screen, then connect it and launch the rom update utility.... should work, if not, have you updated the Vista WMDC.... Works for me everytime...
Deb.
It don't work.. in tri color screen, after i plug in, it cannot even detect my SPL version at all (which is spl 2.03). It just says "USB".
I followed all the instructions for the Win Vista tweak but when I tried to use the new driver files, the vista reported "the files are not for 32bit system" even though I have downloaded the 32bit one.
Can anyone help? If not I have to flash straight away with the ROM
i dont get it.......are you trying to flash hardspl now or just a rom?
i mean i want to hardspl my phone before install but it can't.
But i can install the rom straight away!
did you take a look at mrvanx's guides?
Yes i followed exactly and the above is the problem i geT
sorry, but i'm trying to understand where is it exactly you are stuck.....could you be a little more specific
jacksony said:
in the hardspl it is able to detect the spl version of my 838pro and everything.
Click to expand...
Click to collapse
someone correct me if i'm wrong, but when you hardspl you are supposed to use sspl, there's no detecting of spl version
i mean in the hardspl program it is able to detect the spl version of my 838pro and everything. but once i press continue, my phone restart and it into trio-color screen and won't do anything already.
i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me
If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!
hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?
Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor
when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck
i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?
after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)
Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1
flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S
If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!
I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !
Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.
did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??
If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.
it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now
worked, 5 minutes into winmo it restarts
mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!
When I turn on my phone, it starts in the Tri-Color bootloader mode and on the screen it shows that there are errors with it. It was flashed with the Olinex HardSPL but it's not saying Olinex any more. When I attempt to flash a ROM or revert to stock SPL or to flash HardSPL back onto it, it opens the % indicator but stays at 0%. I also have tried to flash via SD card but when it recognizes the SD it shows "Loading" but never gets past that.
Is there any way to manually reset the SPL or reload it so that I can get past the error?
When I turn it on without being attached to USB, it says "Serial" at the bottom but changes to "USB" when I connect it to my PC. Is there a way to update it through a Serial connection?
Can someone help walk me through how to get my phone working again? I'd really appreciate some help.
just flash the stock tmobile ROM.
I would run the enablerapinew.cab that Olinex puts out and then try and reload the hardspl back onto the phone. Once you have the hardspl reestablished you should be able to rewrite a rom to the phone.
palosjr said:
just flash the stock tmobile ROM.
Click to expand...
Click to collapse
I can't flash any ROM, including the T-Mobile Stock ROM. The SPL is messed up.
InRBigness said:
I would run the enablerapinew.cab that Olinex puts out and then try and reload the hardspl back onto the phone. Once you have the hardspl reestablished you should be able to rewrite a rom to the phone.
Click to expand...
Click to collapse
I can't get the phone to boot into Windows or I would just run Olipro's CAB and be done with it. I'm stuck at the bootloader and can't get past it.
ahh so true.
I had trouble flashing the HardSPL and I just kept doing it until it took. It would sit at 0% then error out. Make sure that computer has fresh boot, no antivirus running etc and keep trying to get it to take the flash. Not much else you can do. You might want to ask in the Rom section or open a ticket at Olinex website. http://support.htc-unlocks.com
InRBigness said:
ahh so true.
I had trouble flashing the HardSPL and I just kept doing it until it took. It would sit at 0% then error out. Make sure that computer has fresh boot, no antivirus running etc and keep trying to get it to take the flash. Not much else you can do. You might want to ask in the Rom section or open a ticket at Olinex website. http://support.htc-unlocks.com
Click to expand...
Click to collapse
It's not the computer that's the problem, it's the phone, though I don't have AV software or anything like that anyways. I have tried is on 2 computers at home and 1 at work.
I tried to flash a new ROM via SD card... all it said was "Loading" forever (I left it on "Loading" for over an hour with no change). I left it attempting to flash HardSPL over night and it was still at 0% in the morning.
The SPL is not working right and I can't flash a new SPL without already having a working SPL.
I got this working. Olipro got back to me from my his support.htc-unlocks.com trouble ticket site.
I had to use MTTY to run the command "SET 16 0". Then I was able to get my phone to reboot and it was then able to load the stock T-Mobile ROM. From there, I was able to flash HardSPL back onto it, then a custom ROM.
Thanks Olipro!