i was trying to update a new rom a error was displayed on screen about radio rom update failed. i tried hard but was unable to get the radio rom back.
it say No gsm and IMEI no is also missing in the settings.
PLZ HELP to get it back to life
try to follow from :
http://forum.xda-developers.com/showthread.php?t=301662
not sure will help or not, but the link to the "hermes flasher" will explain your problem I think.
just had the same problem yesterday, and I also dunno how mine got back to work again after few times flashing. (not sure which step made it work again)
thanx but i already tried it does not worked
Related
Dear All Good day to you... I have a htc universal and I tried to upgrade it im a newbee and all was fine but when it comes to upgrading the radio rom it freezes and goes into bootloader mode I tried every possible thing and the same thing all the time all goes well ce is upgraded and all other roms but radio always freezes when i check the device info there isnt any radio ver. I unlocked it emptyed the extnded ram and the same thing happens tried several radio ver. and all the same kindly help out because i can use the device windows ok all is ok but cant cal with the phone, is there a way where i can formate everything nothing at all on the device and go from there or you can help out in another way which i might not have thought of.
Thanks
Ati
hi i was using 5.0 with my new D900 then i read on forum update windows to 6 then i download it and double click on it phone just not working on showing
USB on bottom v2.01 nothing els phone not working anymore
then i also use
mtty1.42
then
task 28 55aa
all command everything work fine but i dont know what to do next after running phone still showing same thing please help im a NOB i know
Welcome to forums
I asume you already read the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Have you tried doing DOC format?
Good luck,
chamkilla said:
hi i was using 5.0 with my new D900 then i read on forum update windows to 6 then i download it and double click on it phone just not working on showing
USB on bottom v2.01 nothing els phone not working anymore
then i also use
mtty1.42
then
task 28 55aa
all command everything work fine but i dont know what to do next after running phone still showing same thing please help im a NOB i know
Click to expand...
Click to collapse
So, you flashed the ROM and the device didn't switch on? Then you used mtty and everything went well, but now you don't know what to do? Try another ROM for your device. If your phone has USB at the top and bootloader version numbers at the bottom - you are in bootloader mode, ready to flash.
Tml_wm61_21028_regular_64mb
hi
i install TML_WM61_21028_REGULAR_64MB and i got problem my phone work for few hours and then it dead for few hours nothing no button nothing showing just dead no light
then i take out battery and put again after few hour it work again for few hour and then dead again is that battery or ROm problem please help
also please tell me somthing about RADIO i got 0.0.0 verion in phone what is the use of Radio
please explain little
Perhaps your battery has to be changed
Radio improves signal and also afects on battery, for Tomal ROM´s the most recommended are:
1.18
1.17
1.15
You can find them in the Wiki or in the fttp, or using search button
chamkilla said:
hi
i install TML_WM61_21028_REGULAR_64MB and i got problem my phone work for few hours and then it dead for few hours nothing no button nothing showing just dead no light
then i take out battery and put again after few hour it work again for few hour and then dead again is that battery or ROm problem please help
also please tell me somthing about RADIO i got 0.0.0 verion in phone what is the use of Radio
please explain little
Click to expand...
Click to collapse
Radio is your GSM carrier signal picker and cannot be 0.0.0. Different Radio versions allow you to pick up signal better or worse, depending on many factors, such as tower proximity, location, obstructions etc. Higher Radio version number does not necessarily mean better, but in many cases there can be an improvement in reception. Different ROMs work better with particular Radio versions and the ROM creator will generally recommend the Radio to use with his ROM, based on testing. Sometimes you may find other version works better for you than others.
I suggest for you to try and flash your original ROM, the one that was on your device out of the box. The original ROM package comes with everything you need in 3 parts - OS, Radio and ext ROM. Once you have all 3 established and your device working properly, you can eliminate your device as being the culprit, which leaves a battery.
The problem you described might sound like a battery problem, not sure whether you described your Radio problem correctly, but if that's the case you can try flashing Radio only and see if it solves the problem. Although without any Radio (and custom ROMs come without Radio), I don't see how you could use your device as a phone at all.
hi
hi thanks for your reply can anyone give me original ROM for XdaExec O2
waiting for ur reply please help
Nex time please use the search button
http://forum.xda-developers.com/showthread.php?t=539252
hi
hi i have installed 64mb TOMAL and 1.18 radio
but i have one strange problem the the button just going down down down automatic even i dont touch anything it scroll down automatic
is anyone know why its happening ?
Please post your questions regarding an specific ROM in the proper thread on Universal mobile 6
chamkilla said:
hi i have installed 64mb TOMAL and 1.18 radio
but i have one strange problem the the button just going down down down automatic even i dont touch anything it scroll down automatic
is anyone know why its happening ?
Click to expand...
Click to collapse
My guess is your button is jammed or PCB is damaged as the worst case scenario.
I know that I have already posted on someone else's thread, so I figured rather than hijacking someone else, I would start my own.
Here is my issue. I have tried every posted method out there for flashing Radios into my Sprint Vogue (flashed to MetroPCS). I am currently on NFSFAN's 1.00.6.5 Rom (21864), with radio 3.37.10.
I have tried...
*Flashing from SD card with a fat32 formatted 2 GB card, renamed radio to VOGUIMG.NBH (upper and lower case),
*Flashing via USB with ActiveSync on,
*Flashing via USB with ActiveSync off,
*Flashing via USB with bootloader preset,
*Flashed back to the Alltel rom used for SuperCID and tried to flash radio while in that rom,
*I have tried with radios 3.42.30, .40, and .50.
The only thing I have not tried has been mtty, but somehow I have my doubts that it will work.
Every time the RUU runs, it starts and the progress quits at 8%, with my phone being rebooted. Also, the RUU displays error message 328....
I have searched all over and tried a few things but most of them are related to the Titan and not to the Vogue. If anyone has encountered this issue and knows how to solve it, I am open for suggestions. Thanks...
I suggest your flash your phone with the stock rom of bell if your want the 3.42.5 radio. Just reset as soon as your see the 3 second customization screen.
Then unlock phone, and then flash your fav custom rom.....
SL said:
I suggest your flash your phone with the stock rom of bell if your want the 3.42.5 radio. Just reset as soon as your see the 3 second customization screen.
Then unlock phone, and then flash your fav custom rom.....
Click to expand...
Click to collapse
I'll give that a shot. Thanks for the suggestion...
@SL
I followed your advice to a certain extent. I went with the latest Sprint official rom, which carried 3.42.30 in it. This seemed to work ok. I still cannot go to .40 but I guess if I flash from the original carrier that had this rom, I will be in good shape (Bell with .50, etc). Do you know which carrier has .40? Thanks for the help!!!
@ SL
I finally went over to the Bell rom that can be found in HTC's official website. I am finally up and running with 3.42.50!!!
I will probably try to make a sticky or a post describing the problem and the solution for people with the same issue, which I have seen quite a bit looking for an answer...
Once again, thanks for all your help!
i have tried following the instructions on another thread i found here about trying to fix a 3g issue with the incredible and new roms, but i have not been able to get my 3g back. currently i am running a stock ruu. my system info reads s follows...
Android ver
2.2
baseband ver
2.15.00.07.28
Kernel ver
2.6.32.15-gb7b01d1
htc-kernel @and18-2 #1
build number
3.21.605.1 CL231334 release-keys
software number
3.21.05.1
ClockworkMod Recovery v2.5.1.2
i have rooted again since i ruu'd and have more or less just lived with it while trying to figure it out on my own. it seems to be random sometimes i will be able to look stuff up other times not so much. i know it isn't my service area as i have a work blackberry on verizon and that is fine. does anyone think this could be a software issue or does this sound like hardware. i am really hoping it is software as i have had my incredible since launch and really don't want to get it replaced, lol. i appreciate any help you guys can give me.
could it be the radio i have flashed? i dont know a whole lot about them so i havnt done a whole lot of troubleshooting there. can i go backwards with radio flashing? i just want to be sure before i try that as to not brick.
Does your 3g disappear or drop down to 1x often? You say you tried another thread, could you link me to it so I know what you did OR could you explain what steps you have done to alleviate this?
The typical solution is to flash a stock rom then boot into the rom itself and leave it running for a minute or two, even make a call and check 3g to make sure it's working. Then restore your backup rom and enjoy life. I'll provide you a stock rom link with steps to follow in a few minutes.
found it. i followed this thread and reverted back to stock. still hasn't helped my 3g woes. could having the wrong radio cause these problems?
http://forum.xda-developers.com/showthread.php?t=817487&highlight=3g+fix
***Edit i generally don't even have the 3G symbol in my notification bar or if it is there like now it just wont connect sometimes. in settings it says mobile network is connected as well
undeclared said:
found it. i followed this thread and reverted back to stock. still hasn't helped my 3g woes. could having the wrong radio cause these problems?
http://forum.xda-developers.com/showthread.php?t=817487&highlight=3g+fix
***Edit i generally don't even have the 3G symbol in my notification bar or if it is there like now it just wont connect sometimes. in settings it says mobile network is connected as well
Click to expand...
Click to collapse
Aight, the rom link in my instructions is this one from RMK40. His link has since gone down. It is the first leaked OTA from last May prior to the flood of gingersense roms.
1. Boot into recovery and perform a Nandroid
2. In recovery, do a Factory reset/Wipe Cache/Wipe Dalvik Cache
3. Flash this
4. Boot into the rom and make a test call. Also check your 3g connection and see if it works. You can run it for ten minutes or an hour if you want to see if the connection fails, although it shouldn't.
5. Reboot into recovery and do Nandroid restore
6. Enjoy.
Post back with your results.
Edit: Here is a reference thread from where I obtained my instructions. I believe you are in the same scenario.
http://forum.xda-developers.com/showthread.php?t=1229732
i did a back up, wiped and flashed the rom, twice, both times i got boot loops :-/
maybe it's my radio?
undeclared said:
i did a back up, wiped and flashed the rom, twice, both times i got boot loops :-/
maybe it's my radio?
Click to expand...
Click to collapse
I would flash the froyo ruu thru hboot and then reboot. Then go back to hboot and select factory data reset, or boot to the os and go to Menu Settings Sd & phone storage and select factory data reset. Let it do its thing and then reboot. Once it boots up do the ota programing and your 3g should be fixed. Then you can flash cwm recovery thru hboot, and the su binary thru recovery and you will be rooted and ready to flash roms again. I have had this happen several times when using sense 3/3.5 roms ported from sprint phones.
Also that radio is old, from froyo, but that shouldt be the issue. If a factory reset dosent fix it i guess it wouldnt hurt to try updating to the newest radio. Im 95% positive factory reseting the phone from hboot or the settingd menu will fix your 3g. You have to have the stock recovery for the reset to work, that is why you need to ruu again, unless you are already on the stock recovery.
thanks i think this is working i just got done with programming and now i have 3g! gonna stress test it till later tonight i think and then it is off to flashing a new rom! any rom either of you suggest that shouldn't give me these 3g issues?
again thanks so much for your help
undeclared said:
thanks i think this is working i just got done with programming and now i have 3g! gonna stress test it till later tonight i think and then it is off to flashing a new rom! any rom either of you suggest that shouldn't give me these 3g issues?
again thanks so much for your help
Click to expand...
Click to collapse
It usually happens to me on roms ported from sprint phones, mostly after doing a *228. I would highly advise not to do a *228 on a sprint rom. If you want to be extra cautious i wold just stay away from sprint ported roms all together.
Hi, guys im having some issues and would like some expertise. Okay so i have an s4 the model is m919v but the model is unrelated to the problem. I was running custom roms and have been for a few months and i have a phone that has a locked sim. I heard from someone that i can flash an older version of my modem and get the service menu to unlock... point is i did it and it didnt unlock BUT THATS NOT MY ISSUE. I decided to then revert to stock because my phone was being really glitchy after i tried the unlock. Now i restored my phone and got a custom recovery installed a custom rom that was working flawlessly before is now also being glitchy the same way after i tried to unlock it,
These are some glitches im experiencing:
1) phone app is taking a long time to load and it doesnt type in numbers fast
2) when i call someone it just freezes and i cant go to the call screen
3) no notification sounds coming from my phone it just vibrates but doesnt ring
and im sure a few more
IM SURE THESE HAPPENED AFTER I WENT INTO THE SERVICE MENU AND TRIED TO UNLOCK MY DEVICE.
Someone please tell me what i can do to fix this because ive already reverted to stock once.
zee24 said:
Someone please tell me what i can do to fix this because ive already reverted to stock once.
Click to expand...
Click to collapse
You just might want to re-flash the stock rom and before rebooting, clean all the cash and do a factory restore. That should restore the operation to your device.
Only your Pure stock roms will contain any of the modem/boot stuff, if my information is correct.
Aloha and Good Luck!