Hi, I own an Asus P535 with the WM6 rom update. I love this device and almost never had any problems with it (compared to the amount of problems my friend had with his X500).
Unfortunately, I am unable to connect any bluetooth HID device to it. I never tried this with WM5 so I'm not sure if the update might be the reason (although I believe it is). I tried to connect 3 MS bluetooth mouses (I know I cant use it as a cursor, but I should still be able to connect to it) and my Sony W810i phone (It has a mouse and keyboard service) but after I create the shortcut to the service and click on it, I get the connect to a keyboard wizard and it always ends up with a "Bluetooth keyboard not found!" message.
I really need this service to work properly. I want to be able to control my P535 while I'm driving without reaching to it (voice command, music and navigation). Plus I'm afraid to buy a portable bluetooth keyboard since it might not work with my all in one device.
Can someone please suggest a solution or at least a reason?
Thanks guys!
Related
I have a BlueAngel / SX66 on Cingular. I have been through every ROM upgrade you can imagine, all with the hopes that SOME DAY the bluetooth will work properly. More specifically, I have a stick BMW and it's impossible for me to talk on this thing and drive at the same time, not to mention really unsafe, but I absolutely need to talk in the car because I'm on the move a lot. There is a bluetooth headset interface in the car that I know is pretty damn good because it works so beautifully with Motorola devices (specifically the somewhat ancient V600 I have). My SX66 can barely get through 3 seconds of being connected to it before it just goes haywire and drops the connection, locks up my stereo, etc. It's a disaster. So every time a new ROM comes out I sit for hours upgrading just hoping that maybe this time it will work. I've tried a Motorola HS810, HS850, a Logitech Mobile Freedom, a Jabra BT800, and an Ericsson HBH600. Not one of them can consistently hold a connection without it dropping here and there and me having to go to the Bluetooth manager and "reconnect". These are all reputable headsets that work flawlessly with other devices.
Conclusion: The MS bluetooth stack is pathetic.
Problem: I want my SX66 to work with JUST ONE bluetooth device flawlessly. It doesn't need to be the car necessarily, but that would be really sweet if it did. I have recently upgraded to WM5 in another feeble attempt, but alas WM5 doesn't appear to be compatible with GoodLink, the messaging sync software that I'm tied to that makes me use this god awful device (I won't use a Treo because the Palm UI is garbage and it has its own host of problems I've seen). I'm going to have to downgrade back to 1.40 to get GoodLink to work again because its pretty vital to me.
Question: Does anyone know how to get Bluetooth to work consistently with any headset, paired with an SX66? I seriously have sank like $400 just in headsets trying to get this piece of crap to work. If there are any stack upgrades, firmware flashes, etc. WHATEVER I'm willing to try anything. This is the only Windows based device available on the market that is compatible with GoodLink and has a qwerty keyboard that's easy to use.
FYI, the BA uses the Broadcom/Widcomm BT stack, unless you've upgraded it to WM5.
hi i whant to now is there any fix to bluetooth mouse work with jasjar cause the mouse work but the arrow don't appear but i can clik on start ect ...
what do i do ?
the mouse is the omiz OMM810
Stowaway Travel Mouse
I have the same situation with bluetooth pilot kensington
I think that we need driver of mouse for universal
Someone already use both a mouse and a keyboard Stowaway Travel Mouse
Please search
:wink:
I have both stowaway mouse and keyboard working together. Their driver will display the cursor arrow when a mouse is connected. There is a WM5 version of driver on ThinkOutside's website.
If you are using a bluetooth mouse from other manufacturers, I remember there is a little Pocket PC utility somewhere on the Internet that will display the cursor arrow. The very first utility of this kind was developed for USB mouse to be used with USB Host-enabled PDAs. I presume that the same utility would also work with bluetooth mouse. Basically, the utility draws a cursor arrow on the screen. That's all it does.
Does anybody knows if it is possible to get "MS IntelliMouse Explorer for Bluetooth" to with Universal?
At home off course... the mouse is almost as large as the PDA
Is there any driver available?
Does the arow appears?
Conchas said:
Does anybody knows if it is possible to get "MS IntelliMouse Explorer for Bluetooth" to with Universal?
At home off course... the mouse is almost as large as the PDA
Is there any driver available?
Does the arow appears?
Click to expand...
Click to collapse
found this post while I was looking 4 the same thing!
http://forum.xda-developers.com/viewtopic.php?p=137702.
smells good, i'll give it a try
Anyone having fun yet?
It seems that on the JasJar any stowaway driver before ver 4.3 fails
The Cracks only seem to work on anything prior to 4.3
SO we are stuck between a Rock and hard place
Cant we hack the dll's again??
Who's up for trying :roll:
Regards
it worked perfectly with buzz 1.65... but with the new 2.00 it doesnt work anymore ;-(
from buzz's forum:
It seems the newer OS addresses the dll differently and therefore it fails to load. There is a new version of the Think Outside Stowaway driver 4.4 this loads fine, but does unfortunately only work with the stowaway hardware and not with the generic HID devices you and I have....
I hope someone can fix it up. I suppose the stowaway dll tries to identify the hardware and if someone is able to modify the dll not to verify the id of the hardware it should work fine once again.
someone able 2 help?
has anyone got this working yet?
with aku3.2 : the phone finds the mouse without the stowaway driver.. but needs an passkey wich isn't 0000 or 1234.. (altough I unchecked "secure connection") anybody an idea?
I don't think that's anything to do witn AKU3.2, it's just simply trying to pair with a bluetooth device.
I have paired my Microsoft BT mouse with my JasJar, but like most people, can not get the Stowaway drivers working.
I used to love using a USB mouse on my old Toshiba e800, I really wish I could with this too. I already have 3 bluetooth mice, I am not going to buy one purely for use with a PDA.
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
dlaponin said:
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
Click to expand...
Click to collapse
I used a Logitech V70 following the instructions on the site and it worked as advertised. I've also paired it with my Logitech diNovo Mini although not at the same time.
edit: Actually I installed the cab, turned on the radio, initiated a device search, then I turned on the V70 and pressed the connect button on the bottom. No password was required, I just clicked Next as soon as the mouse was recognized. I think this is a little bit different than the order specified on the website.
i'm encountering two main problems.
1) the Teksoft software is not recognising the bluetooth is on. I'm using the radio rom that comes with dutty's v1.7.
2) after I pair the mouse (with a blank password) it remains in discovery mode.
Just a bit of extra information i'm using the ig keyboard and have the igo software installed not sure if that could be causing problems. Also having read other forums the mouse i was trying to use was the microsoft 5000 and one of the guys had this working perfectly which leads me to believe its my phone.
Any help would be much appreciated.
Bluetooth stack on HTC HD2
Hi All,
I just got th HTC HD2 and I also run into difficulties connecting a bluetooth mouse. Looks like the problem lies in the Bluetooth stack.
I'm using a iGo/Thinkoutside stowaway bluetooth mouse and keyboard. The software (latest version from 2007) does not recognise that Bluetooth is on.
The keyboard is recognised as a standard HID device and works without any additional software.
I tried the Teksoftco Blueinput software and got the same problem that the software does not recognise that Bluetooth is on. Probably it only works with the MS bluetooth stack and not the one on HTC HD2 (TP2, HD, ...?).
I can connect to a bluetooth mouse but the HD2 can't find any services to use.
Anyway, If anybode has a solution please post but my hopes are verly low... :-(
Maybe a wired mouse via USB host on the car cradle will work...
HD2 with rii mini bluetooth keyboard
Hey, I have not tried to pair my bt mouse and keyboard together, however, I paired my rii mini bt keyboard and both the mouse and kb work! It is awesome. Let me know if you have any questions. Hope this helps.
anyone have the android.apk that comes on the cd?
its not on my cd and i cant pair it with my phone...
I've attached apk for Rii Mini for Android.
gonzalo_reyes said:
I've attached apk for Rii Mini for Android.
Click to expand...
Click to collapse
thanks man...
for some reason its not letting me connect to the net to register it.
rii
Did you have any luck registering, I'm running into the same thing?
No drivers on the cd.
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
playdo said:
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
Click to expand...
Click to collapse
I had exactly the same problem in my Touch HD with Energy ROM and found the solution. Our problem is because the bluetooth HID libraries are missing in the Energy ROM. Thus, first, you need to restore them by using TRV_Bth_HID.cab attached. Restart. Then, you need to pair your mouse and to ensure, that the service "input device" has appeared and marked in the bluetooth manager. Restart with the turned on bluetooth and the mouse connected. Only after these steps, you can install V1.5RC4. Note, that V1.5RC4 overwrites the library \Windows\bthhid.dll, which was in TRV_Bth_HID.cab. As a result, after V1.5RC4 installation, your mouse will be seen as "disconnected" in the bluetooth manager - this is normal. But, if you need to install new device, you will have to repeat all steps above.
Help
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
nagagaya said:
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
Click to expand...
Click to collapse
you look at http://ipadgeartalk.com/ipad/anker-...5-0-cellphones-computer-laptop-notebook-black
I used to use MobileRemote by MobileSRC.com with my touch pro and it worked great as an easy to use keyboard/mouse combo for my Home Theater PC.
I have been trying to get it to work on the TP2 though and finally I decided to search a bit and found a post on the MobileRemote forums saying that it will not work at all on the TP2 due to the changed BlueTooth Stack (Widcomm) that is included by default on the TP2.
(I believe this is the same thing that causes some issues with TomTom, but that's a different topic)
I was just curious if anyone can recommend a similar program, where I can use my TP2 as the keyboard and a trackpad or an air mouse for a windows PC? If anyone has tested them out and know what works with the TP2 please let me know. Thanks!
there are a couple out there but you have to install a software on the PC and on your device for them to work.
The beauty about MobileRemote is that you don't need to do that so the computer automaticly senses it as a bluetooth keyboard/mouse.
I was also upset that it doesn't work with the Widcomm BT Stack because now i can't use it with my PS3 and it was the only option.
My solution would be to get the MS BT Stack ported over to the Rhodium because the Widcomm stack has caused other issues for me on top of this one.