Related
My HTC TP2 Battery went dead today. When I got it home I plugged it in and assumed it was charging..
Here's what was really happening.
It charges just enough to boot .. attempts to boot and doesnt have a charge enough to boot all the way up.. Shuts off then charges enough to boot.. Etc..
Then it repeats the same process OVER AND OVER AND OVER
I cannot figure out any way to get this thing to just charge. I have tried for hours now.
Charger is fine but keeps doing the process above..
If any one could help I would appreciate it. I cannot take it back as it has a cooked rom and it has to be charged to change the rom.. I have Absolutely NO friends with the TP2. Am I stuck?
superchuck333 said:
My HTC TP2 Battery went dead today. When I got it home I plugged it in and assumed it was charging..
Here's what was really happening.
It charges just enough to boot .. attempts to boot and doesnt have a charge enough to boot all the way up.. Shuts off then charges enough to boot.. Etc..
Then it repeats the same process OVER AND OVER AND OVER
I cannot figure out any way to get this thing to just charge. I have tried for hours now.
Charger is fine but keeps doing the process above..
If any one could help I would appreciate it. I cannot take it back as it has a cooked rom and it has to be charged to change the rom.. I have Absolutely NO friends with the TP2. Am I stuck?
Click to expand...
Click to collapse
Is the phone off when you're trying to charge it? Off, not in standby.
When it's plugged in and should be charging, is the light on the left side of the ear-speaker orange? Or is that the deal -- it's orange, indicating charging, but actually isn't charging?
How do you know the charger is fine ?
Open your battery cover, .. remove the battery, put the battery again, .. and charge it, .. do NOT turn it ON yet. let it charge for some time, . .and when it is completely charged, .. turn ON the device
irkan said:
Open your battery cover, .. remove the battery, put the battery again, .. and charge it, .. do NOT turn it ON yet. let it charge for some time, . .and when it is completely charged, .. turn ON the device
Click to expand...
Click to collapse
This also worked for me. Mine went dead during a conference call. I was surprised to see that the TP2 appears to use more power with WiFi connected and in a call than the charger can provide.
I really don't know what's just happened...I think maybe my TP2 just decided to die on me.
I was using NRGZ Leo ROM from 22nd Feb. All was going well until my battery ran out today. At the time, my daughter was playing a game on it, not from WM, but from the Android port (Haret). While she was playing, I heard the familiar short vibrate of a soft reset. I know my battery was low and I suspect the battery wasn't charging, although it was plugged in (not sure if Android supports charging yet in the later builds)
Anyway, for some reason, it wouldn't go past the vibrate/Touch Pro2 screen. It just kept resetting and looping back. I attempted to do a hardware reset (power button, talk/send, end buttons) but accidently chose the wrong combo (power button, volume down) and entered bootloader. No problem yet, just reset and try again, right? Only I didn't get the chance, as it reset itself and looped through bootloader.
Now I am stuck in this loop. I can't flash from SD as it wont stay on long enough before self-resetting to find the RHODIMG.nbh on the card. I can't connect to my PC as it wont stay in bootloader long enough before self-resetting for my PC to install the "Windows Mobile Device" drivers, and even if it did, when it self-resets, it would disconnect anyway. I can't connect to MTTY for the same reason. I can't connect to ActiveSync or WMDC as I can't boot to WM to get ActiveSync running on the device.
When plugged in to AC power or through USB, it fires itself up automatically and into this loop, and it wont turn off manually, reset or accept any other button combos to enter RUU (from SD method) or to do hard reset. When it is not plugged in to any power source it won't even switch on.
I suspect it is resetting as it is not charging. I'm guessing that when in bootloader, charging is disabled, and I think this because I was originally getting 3 seconds of bootloader, now I am getting around 8 seconds, but it doesn't get any better than that, and I don't know of a rom upgrade method that can be done in 8 seconds! There are a few seconds of charging time before bootloader kicks in and the orange LED goes out and presumably stops charging. Am I right in thinking there is no charging in bootloader and in the Android port (I am using the latest version from 27/2, rhod100).
Basically, to summarise, I am stuck in bootloader-reset-bootloader loop, I cannot connect to pc in any way, flash from SD, Hard Reset, I have very little or no battery and it won't charge because it keeps going into bootloader where there is no charging taking place and it wont turn off to charge that way either.
Any help will be greatly appreciated. I don't hold out much hope though. At the moment, it doesn't seem that I am able to interact with it at all to make it do anything different or to manipulate what it is trying to do. Hopefully someone will see something familiar and maybe have some suggestions.
Oh, and by the way, it's nothing to do with a bad flash. I've been doing this for long enough to know what I'm doing, and I wasn't even doing a rom upgrade at the time. My last rom upgrade was 2 days ago and all went well, and I have been using it without problems since, until now. I haven't flashed my Radio or SPL since HSPL was released, so I know it has nothing to do with that either.
Thanks in advance for anyone who can give any advice at all, or even just take pitty on me! Apologies for all the text. I know it looks boring and may put some people off reading, but I needed to get all the info in.
Are you able to charge when it completely turned off?
can you pull the battery out, put it back in and simply charge for an hour or so to get some juice into the battery?
Then you could maybe reflash it from the bootloader or sd card...
shadixs said:
Are you able to charge when it completely turned off?
Click to expand...
Click to collapse
I can't get it to turn off, power button has no effect.
clauswl said:
can you pull the battery out, put it back in and simply charge for an hour or so to get some juice into the battery?
Then you could maybe reflash it from the bootloader or sd card...
Click to expand...
Click to collapse
If I take the battery out, obviously, it cuts the power and the looping stops...until I put the battery back in, and it starts itself again. I can't stop the loop and I can't turn the power off or even stop it switching itself on.
matmaneyre said:
I can't get it to turn off, power button has no effect.
If I take the battery out, obviously, it cuts the power and the looping stops...until I put the battery back in, and it starts itself again. I can't stop the loop and I can't turn the power off or even stop it switching itself on.
Click to expand...
Click to collapse
I had exactly that problem after a bad romflash. I bought a decktop cradle for the tp 2 that has 2nd. battery charger. Charged the battery and reflash, everything was ok again.
So, juice up the battery and do a hard reset or reflash..
SOMETHING LIKE THIS
I know you prob dont wanna hear it, but id say its a warranty job. Theyll just force flash it anyway so they wont notice the rom you were using.
Cheers guys. I thought it might be the rom. Not sure how though as like I said, my last rom flash was a couple of days ago and it was fine. Guess these things just happen sometimes. I'll try and get the battery charged somehow. Trouble is, I don't know another single person who has a TP2, so it looks like the cradle option I think. It did cross my mind to be honest when I was trying to think of alternative charging methods.
As for the warranty idea, if it can be avoided, I'd rather not take that route if I can help it, but thanks for the suggestion. Lets just say that will remain an option as my last resort if all else fails.
Still open to suggestions if anyone knows of any miracles....any Hogwarts graduates kicking about these forums with a few magic words to spare?
Hey man, I had the same issue when my phone wouldn't for some unknown reason charge.
1) Take our your battery
2) Plug in your DESKTOP CHARGER (not USB from PC!!) to microUSB slot
3) Put your battery back
4) Wait few moments (5 minutes)
5) and you are ready to boot, now you can even charge from USB. No idea why, but looks like booting takes more than 500mA :O
If it wont help, swap those 2 and 3 points
Hey guys! Please give this thread a better title. More related to the problem. Sounds like it could be useful in the future for hopefully very few people.
OK, I will change the thread title. I searched for quite a while but couldn't find any similar cases. But it seems it is more common than I thought since I raised the issue, so a new, more specific title might be more beneficial to other users experiencing similar problems.
For the record, I haven't solved it yet. Waiting on a standalone battery charger I bought from eBay. Didn't really want the cradle. THIS is the one I have bought. I will update on my progress when it arrives.
Thanks for your help to all who have contributed so far.
Hi I have the same problem the phone won't charge or connect via usb I think it is a faulty usb port the phone have & because of that it is causing the phone to go to bootloader.
I've had this happen before, just plug it into the mains charger (wall charger) and let it sit for a while. It will loop a couple times but once there is enough juice in the battery it will be back to normal.
Since you have RHODIMG.nbh on your sd card, maybe taking your sd card out would help it a bit.
There have been other posts with the same issue and plugging it into mains will solve the problem
spark001uk said:
I know you prob dont wanna hear it, but id say its a warranty job. Theyll just force flash it anyway so they wont notice the rom you were using.
Click to expand...
Click to collapse
Not true. just the battery is really low, once charged enough to power device after boot, everything will be back to normal.
fone_fanatic said:
Not true. just the battery is really low, once charged enough to power device after boot, everything will be back to normal.
Click to expand...
Click to collapse
Seems like it would make sense. I don't have my wall charger on me now...does the Rhodium not boot up without a battery in it? I thought my old Hermes did, guess I've never tried it with the TP2.
This might sound a little stupid, but I actually know somebody that said it worked for his iPhone (waste of 3-4 mins if not). Plug in the USB charger from PC. Reboot the PC without disconnecting the phone. Wait 3-4 minutes...
Toleraen said:
Seems like it would make sense. I don't have my wall charger on me now...does the Rhodium not boot up without a battery in it? I thought my old Hermes did, guess I've never tried it with the TP2.
Click to expand...
Click to collapse
from what i remember, it won't boot without the battery.
fone_fanatic said:
I've had this happen before, just plug it into the mains charger (wall charger) and let it sit for a while. It will loop a couple times but once there is enough juice in the battery it will be back to normal.
Since you have RHODIMG.nbh on your sd card, maybe taking your sd card out would help it a bit.
There have been other posts with the same issue and plugging it into mains will solve the problem
Click to expand...
Click to collapse
I left it looping for hours....no joy I'm afraid. Just gonna have to wait for this charger to arrive I think
Toleraen said:
Seems like it would make sense. I don't have my wall charger on me now...does the Rhodium not boot up without a battery in it? I thought my old Hermes did, guess I've never tried it with the TP2.
Click to expand...
Click to collapse
fone_fanatic said:
from what i remember, it won't boot without the battery.
Click to expand...
Click to collapse
Definitely doesn't power up plugged in without a battery. Battery needs to be present. Still waiting on this charger though. I'm hoping it's not one of those where it says the item location is Cardiff (UK) when actually it's in Hong Kong and takes 14 years to arrive
soocerclaude said:
Hi I have the same problem the phone won't charge or connect via usb I think it is a faulty usb port the phone have & because of that it is causing the phone to go to bootloader.
Click to expand...
Click to collapse
I really don't think it's the mini usb port as it charges and tries to connect to pc before bootloader kicks in & it all stops.
Hi I found a way 2 get past the bootloader loop just plug your headphones went in bootloader and restarted the phone but it still won't charge or sync with computer.
soocerclaude said:
Hi I found a way 2 get past the bootloader loop just plug your headphones went in bootloader and restarted the phone but it still won't charge or sync with computer.
Click to expand...
Click to collapse
Well when I unplug the ac adapter, mine doesn't last on bootloader for more than a couple of seconds before dying. Doesn't even get to the RHODIMG.nbh update screen that way - not enough charge (I'm still hoping). Tried charging overnight while looping but still wouldn't charge enough. The trouble is that obviously the bootloader is killing the battery as it's not charging very much.
Got my charger finally....but they sent the wrong one. Waiting on a response from the seller. The "dock" on the charger wasn't big enough, so while the connectors were in the right place to charge the battery, the battery didn't sit flush, so they wouldn't reach the points on the battery itself. Hope they have a TP2 one & it's not just them thinking it's compatible, as it's the only one on the whole of ebay UK that has them in stock in the UK. Don't want to have to wait up to 2 weeks for one from HK.
I will keep you posted anyway.
Hi I brought mine 2 get fix because my warrenty got void due 2 water damage. I think it is the usb port that is causing this, saw in other forums the same thing. Will get back the phone on monday & I will update u on the situation.
I Really didnt even do anything. flashed cm7.0.2 few days ago
with pershoot kernel
been running fine. never overclocked etc.
just few hours ago my phone kept freezing and when i turn it back on it would show black screen, pulled battery rebooted and froze in bootscreen.
wiped dalvik cache wiped cache rebooted been working fine then froze again
same thing happened
repeated the process then forze again so i thought i would wiped the whole thing so did factory reset and it showed something like E:cant mount/recovery/cache or w/e
(i used gmethod to rooted the device.)
....i flashed miui on top of it then flashed kernel and those error popped up again
....i was scraed rebooted...htc logo
for like 10 min...pulled out the battery....now my phone wont turn on... any ideas?
i know the phone is done for real. when i plug into charger nothing comes up
when i turn it on nothing comes up
when i turn it on to hboot nothing comes up
does anyone know where i can get a new motherboard?
i voided the warranty by doing the spring mod
or new screws with void stickers.
It's possible the battery is having problems, i doubt it though, it seems as though youve hard bricked your phone.
does anyone know where i can get the motherboard or better
OEM htc g2 screws with void stickers?
eunkipark92 said:
does anyone know where i can get the motherboard or better
OEM htc g2 screws with void stickers?
Click to expand...
Click to collapse
Haha
Sent from my T-Mobile G2 using XDA Premium App
By the looks of things, any number of factors could be contributing to your Desires errors. However, it does seem like you've messed up the partitioning on the Desire Z internal memory and its giving you errors for it.
Try these steps.
1. Take the battery out and plug in your charger.
If the light doesnt come up try plugging your USB cable into your PC to charge.
If the light still doesn't come up your Desire Z is gone.
However, if the light does eventually come on, go to 2.
2. If any light comes up, then try turning it on.
If the screen turns on and you see ANYTHING besides black thats GOOD. go to 3
If the screen doesn't turn on there may be a motherboard issue.
3. Now if you can get it to turn on and not show black you should try this:
3a. Plug it into your PC then from there hold VOL DOWN and then navigate your way to Fastboot. It should say FASTBOOT USB or something like that.
3b. Flash a stable ROM onto your phone via your PC by going into recovery, mounting as storage then copying a ROM over. Then just flash the ROM onto your Desire Z and it should be fine.
If all this fails you should send it to a repair shop. There's no way you would get warranty to fix it at this point.
so ok i managed to get mini usb cable
When i conntected my phone to charger last night the orange battery light came on.
but nothing else.
when i clicked voulme down button then connected it to my computer it vibrated 5 times then green light came on.
And on my computer it showed up as Qualcom CDMA technologies MSM.
im searching everywhere to see if i can fix it. at this point any help would be appreciated.
I did notice that even though the phone wasnt turning on the phone was getting hot? (it wasnt connected to the charger obviously.)
when i did battery pull and leave it out it cools down. when i put it back in and turn it back on it gets hot after a while even though the screen and everything does not turn on.
Do this:
Pop out the battery and leave it for maybe 1 minute.
Then put the battery back in and see if the phone gets hot. If the phone does get hot skip passed 3 and 4.
Now assuming the phone doesn't get hot, plug it into your charger for about 5 minutes before turning the phone on. Try and get into Fastboot/Bootloader.
Once in your bootloader, just navigate your way to recovery and flash a new rom.
If the phone/battery gets hot it means its turned itself on as soon as the battery has gone and the phone isn't displaying anything. You should try just plugging the phone into the charger and turning it on. See if you get anything up on the screen. If you do then just jump into recovery and flash a rom.
Otherwise, if the screen always stays black regardless of what you do, send it in for repairs.
Aegishua said:
Do this:
Pop out the battery and leave it for maybe 1 minute.
Then put the battery back in and see if the phone gets hot. If the phone does get hot skip passed 3 and 4.
Now assuming the phone doesn't get hot, plug it into your charger for about 5 minutes before turning the phone on. Try and get into Fastboot/Bootloader.
Once in your bootloader, just navigate your way to recovery and flash a new rom.
If the phone/battery gets hot it means its turned itself on as soon as the battery has gone and the phone isn't displaying anything. You should try just plugging the phone into the charger and turning it on. See if you get anything up on the screen. If you do then just jump into recovery and flash a rom.
Otherwise, if the screen always stays black regardless of what you do, send it in for repairs.
Click to expand...
Click to collapse
yea it stays black no matter what i do,, but it does get hot though.
Farout.. you should really send it to a repair shop then. The reason why is because you can't do anything to the device without the screen on. You can try and hope for it to boot into HBOOT but you would have better luck sending it off on Warranty or to a phone repairs place.
Aegishua said:
Farout.. you should really send it to a repair shop then. The reason why is because you can't do anything to the device without the screen on. You can try and hope for it to boot into HBOOT but you would have better luck sending it off on Warranty or to a phone repairs place.
Click to expand...
Click to collapse
yae the replacement is already on their way
Haha thats brilliant. Don't brick this one lol.
GReetings,
So I have searched for a lot of forums to see if there is an answer to this.
So the story goes. I got myself a new phone and put the TP2 in a drawer. After moving, I have a reason to pull it out and get it ready to be used again. However, it wont turn on.
So I figure the battery went dead. I plug it into the charger, the LED lights up, and got to wait a few minutes. After a minute or so, the white HTC screen suddenly comes on the screen, it vibrates one quick, and shuts off again.
I cant power it up, I can get it to boot loader. Really not sure what the problem is here.
Any ideas suggestions would be welcome as I want to put this one back to stock so I can send it to my step-kid for use.
Try charging it for a few hours, while it is closed. If the phone regularly reboots and then switches off, leave it that way.
The idea is to charge the battery enough, so as the phone boots.
had the same prob the other day
what helped here was:
remove the battery and let it out of the phone for a couple of hours (i did it at night). had the battery removed for about 8 hours. put it back in and it worked for me again.
give it a try and let me know!
Ok will try that tonight when I'm heading for bed. Ill leave it to charge while I'm at work because I get tired of hbearing it vibrate every 20 seconds while its charging
kilmarac said:
Ok will try that tonight when I'm heading for bed. Ill leave it to charge while I'm at work because I get tired of hbearing it vibrate every 20 seconds while its charging
Click to expand...
Click to collapse
Did you get it to work? I'm having the same problem. I posted in another thread that had the same problem as you.
Maybe HTC really is pushing an auto kill program.
Sent from my PG86100 using Tapatalk
Unfortunately, it didnt work. I think the phone was probably dropped one too many times and is broken. I cant get it to boot, cant even get into the bootloader. So I have no idea.
Steefje said:
had the same prob the other day
what helped here was:
remove the battery and let it out of the phone for a couple of hours (i did it at night). had the battery removed for about 8 hours. put it back in and it worked for me again.
give it a try and let me know!
Click to expand...
Click to collapse
I also had the same problem I took out the battery and blew on it to get it to cool down and had it sit out of the phone for 10-15mins then put it in the phone and plugged into charger and left it for 30mins then hit the power button.
This reboot cycle happens when my phone dies in android and it works every time for me.
Hope that helps
for future reference, the phone died with a Sim card in it, revived when a Sim card was replaced.
Sent from my cm_tenderloin using Tapatalk
yesterday I had the same problem, boot loader doesn't work. But.... I charged my battery, replaced it, pushed Vol. down + EndCall btn. + Power btn and inserted battery. As a result my boot loader is working now. But after running task 29 and flashing custom firmware my phone doesn't came back alive. I'm looking for solution now. Did anybody have the same problem?
When I'm flashing original firmware the process stops on checking my phone.
Please, give me advice how to solve my problem. Thx.
RHOD*** 32M SS-BC
SPL-0.88.000
MircoP(LED) Wrong Plat(0x0)
MicroP(KEY) Wrong Plat(0x0)
Turbo HW/Turbo SW
TP MFG DATA
501,526 793,854
810,209 211,200
211,855 Calibrated
First off it looks like you are not Hard SPLed so custom ROMs will be a problem for you. Second you have a major error with your keyboard and touch screen. I have a TP2 that took a dip into some water that has the same error - MircoP(LED) Wrong Plat(0x0) and MicroP(KEY) Wrong Plat(0x0). When I first got the phone it would not turn on but would make a noise that sounded like it was crying. I got another TP2 that works fine and swapped the top halfs of the phones because the new one looked like a dog chewed on it. It still worked but in real bad shape. The touch screen that got wet works fine so it is on the TP2 that I use all the time. The wet TP2 will now start up but the keyboard, all of the front buttons but the end key, and touch screen don't work. The touch screen will only register getting touch in one spot. So if you have a software keyboard up only the t will be hit. I Hard SPLed it, ran task 29, and installed a custom rom on it. I have to use My Mobiler to do anything with it. It also will take a battery that has a full charge and drain it to about 50% in about 20 minutes and then claim the battery is dead even on a charger. Something to play with.
With the error you have unless you got it wet you might have a bad flex cable. I would try to fix the error first before trying to change roms.
Thank you for answer.
My phone was HardSPLed and flashed by custom firmware and works fine for half a year. The reason for my situation was broken charger... I think that problem in hardware when I put it on charge, my phone lightly flashed by orange lamp and became can't turn on
You are told that it is looks like it doesn't hacked because I tried to roll it back to original.
Are you sure the phone did not get wet? Everything you describe makes it sound like the phone took a dip. If not, try plugging it into a computer and see if it will charge and turn on.
I resolved my problem krekol, you are right at 100%!!! I took my phone from work-shop and they told me that some water get there, or it was just condensate. As a result oxidation around microphone and some connections.
Now, my phone works fine on WM 6.1 (they flashed it) and somewhy I can't flash Jackos S3 JackFULL 1.7.0. and Rhodium-HardSPL_V2_00R3 too
maybe it is effects of oxidation.... I'm trying flash from my flash-card.
AlexeYM007 said:
I resolved my problem krekol, you are right at 100%!!! I took my phone from work-shop and they told me that some water get there, or it was just condensate. As a result oxidation around microphone and some connections.
Now, my phone works fine on WM 6.1 (they flashed it) and somewhy I can't flash Jackos S3 JackFULL 1.7.0. and Rhodium-HardSPL_V2_00R3 too
maybe it is effects of oxidation.... I'm trying flash from my flash-card.
Click to expand...
Click to collapse
You can only HSPL once. If they (or you) relocked the device, you won't be able to unlock it again unless you can get Olipro/cmonex to take pity on you.
Glad I could help. Here is a small warning. Once a phone gets wet it's days are numbered. You might have a week, a month, or a year but the phone will die. I would plan ahead for the phone to die and keep an real close eye on it.
Sent from my HTC Touch Pro 2 running FRX07.1 using the XDA mobile application powered by Tapatalk
AlexeYM007 said:
I resolved my problem krekol, you are right at 100%!!! I took my phone from work-shop and they told me that some water get there, or it was just condensate. As a result oxidation around microphone and some connections.
Now, my phone works fine on WM 6.1 (they flashed it) and somewhy I can't flash Jackos S3 JackFULL 1.7.0. and Rhodium-HardSPL_V2_00R3 too
maybe it is effects of oxidation.... I'm trying flash from my flash-card.
Click to expand...
Click to collapse
If you need to HardSPL a second time, PM me.
I had 7% battery and was on call, phone had shutdown suddenly and won't turn on or CHARGE.
When I press power button it just vibrates Twice. I had connected charger but it won't charge.
Besides it vibrates continuously every few (2-3) minutes (even without doing anything.).
I tried the following.
1). Charged overnight and tried on....Didnt work.
2). Opened the back panel and removed battery to mother board connection few times and connected back......it just vibrates . that's it
Pls help! Its out of warranty.
sanmore said:
I had 7% battery and was on call, phone had shutdown suddenly and won't turn on or CHARGE.
When I press power button it just vibrates Twice. I had connected charger but it won't charge.
Besides it vibrates continuously every few (2-3) minutes (even without doing anything.).
I tried the following.
1). Charged overnight and tried on....Didnt work.
2). Opened the back panel and removed battery to mother board connection few times and connected back......it just vibrates . that's it
Pls help! Its out of warranty.
Click to expand...
Click to collapse
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Thank you for Ur reply! I'm off to other city....will definitely try this method and revert.
sanmore said:
I had 7% battery and was on call, phone had shutdown suddenly and won't turn on or CHARGE.
When I press power button it just vibrates Twice. I had connected charger but it won't charge.
Besides it vibrates continuously every few (2-3) minutes (even without doing anything.).
I tried the following.
1). Charged overnight and tried on....Didnt work.
2). Opened the back panel and removed battery to mother board connection few times and connected back......it just vibrates . that's it
Pls help! Its out of warranty.
Click to expand...
Click to collapse
Let me know hoe it goes, because Im having the exact issue. I tried the steps from sukhwant717, but getting stopped at the step when it goes to the OS. Will keep my phone to charge for a few hours. I observe, that there is no heating up (battery), but will keep it for charging anyways.
Cheers
hellbraker said:
Let me know hoe it goes, because Im having the exact issue. I tried the steps from sukhwant717, but getting stopped at the step when it goes to the OS. Will keep my phone to charge for a few hours. I observe, that there is no heating up (battery), but will keep it for charging anyways.
Cheers
Click to expand...
Click to collapse
I tried n times...its vibrating and stopping at connecting os....
i dont wanna get it repaired from service center .....looking foraward for NOKIA 6 .
I got mine fixed by changing the battery. Bought a new one from AliExpress.
sukhwant717 said:
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Thanks man....I did actually fix the phone...your awesome.....
It went something like this...
First phone refused to turn on....no charging light notification..it keeps vibrating.
Even @sukhwant717 method stopped at "os" thing.
After exhausting all option taken to a local service person who did something and told phones dead.
After coming home I have checked He RIPPED /SNAPPED ANTENNA cable.
I didn't bother much as phone was prononced dead!
After 30 to 40 days was casually reading @sukhwant717 thread and thought of trying again. I coonected charger and SUDDENLY I SAW ASUS BOOT SCREEN and phone was showing BATTERY WITH QUESTION MARK. I let it charge for sometime suddenly bootloader screen appeared but was not entering into recovery.(perhaps damaged bootloader , recovery).
Then I followed sukhwant717 method flashed bootloader and RAW image using ADB.
and phone RESURRECTED but with very low siganl.
It's due to RIPPED antenna cable.
And was getting good reception on 2nd SIM (perhaps uses different antenna/cable)
So I decided to order new Antenna Flex Cable but it's not available in India. So I went to ASUS SERVICE CENTER (near Brandfactory) in Hyderabad
and asked them the cost of Flex Cable, they said they won't sell spares...I have to RMA.
So I did and after two days I have received a call from them that "ITS FAULTY MOTHERBOARD" and will cost 11000 INR (USD 170, seriously ASUS),I said I rather want my phone in previous condition. I even told them to fix antenna cable ...I will manage.
They said their "TESTING SOFTWARE " failing device test even after connecting antenna cable.so they can't sell a part for a TEST FAILED device.
I told them it's because I had unlocked bootloader..the test is failing.they didn't have a clue abt bootloader unlcoking.
So again went to local market for the cable found A cable (though lil longer) and got it fixed for about 300INR ($5).
and got back the reception and typing with LTE connection on ZF2.
Thanks again @sukhwant717 ...
My observations: the issue could be due to
1) it's battery related issue (completely drained bir failed battery)
2) damaged bootloader
The people who have similar problem should leave the phone uncharged for 30 to 40 days even more and connect the charger and see if u see battery with ? Mark.
Or if new battery is available change battery and check....
sanmore said:
Thanks man....I did actually fix the phone...your awesome.....
It went something like this...
First phone refused to turn on....no charging light notification..it keeps vibrating.
Even @sukhwant717 method stopped at "os" thing.
After exhausting all option taken to a local service person who did something and told phones dead.
After coming home I have checked He RIPPED /SNAPPED ANTENNA cable.
I didn't bother much as phone was prononced dead!
After 30 to 40 days was casually reading @sukhwant717 thread and thought of trying again. I coonected charger and SUDDENLY I SAW ASUS BOOT SCREEN and phone was showing BATTERY WITH QUESTION MARK. I let it charge for sometime suddenly bootloader screen appeared but was not entering into recovery.(perhaps damaged bootloader , recovery).
Then I followed sukhwant717 method flashed bootloader and RAW image using ADB.
and phone RESURRECTED but with very low siganl.
It's due to RIPPED antenna cable.
And was getting good reception on 2nd SIM (perhaps uses different antenna/cable)
So I decided to order new Antenna Flex Cable but it's not available in India. So I went to ASUS SERVICE CENTER (near Brandfactory) in Hyderabad
and asked them the cost of Flex Cable, they said they won't sell spares...I have to RMA.
So I did and after two days I have received a call from them that "ITS FAULTY MOTHERBOARD" and will cost 11000 INR (USD 170, seriously ASUS),I said I rather want my phone in previous condition. I even told them to fix antenna cable ...I will manage.
They said their "TESTING SOFTWARE " failing device test even after connecting antenna cable.so they can't sell a part for a TEST FAILED device.
I told them it's because I had unlocked bootloader..the test is failing.they didn't have a clue abt bootloader unlcoking.
So again went to local market for the cable found A cable (though lil longer) and got it fixed for about 300INR ($5).
and got back the reception and typing with LTE connection on ZF2.
Thanks again @sukhwant717 ...
My observations: the issue could be due to
1) it's battery related issue (completely drained bir failed battery)
2) damaged bootloader
The people who have similar problem should leave the phone uncharged for 30 to 40 days even more and connect the charger and see if u see battery with ? Mark.
Or if new battery is available change battery and check....
Click to expand...
Click to collapse
if you need antenna cable i can send you. but before that. send me pics of motherboard where antenna connector sits. don't ever believe local and service center guys. they are dumb enough to ruin things.
sukhwant717 said:
if you need antenna cable i can send you. but before that. send me pics of motherboard where antenna connector sits. don't ever believe local and service center guys. they are dumb enough to ruin things.
Click to expand...
Click to collapse
I bought a cable from a shop (lil longer than ZF2 cable). and got it fixed. Thanks again.
sanmore said:
I had 7% battery and was on call, phone had shutdown suddenly and won't turn on or CHARGE.
When I press power button it just vibrates Twice. I had connected charger but it won't charge.
Besides it vibrates continuously every few (2-3) minutes (even without doing anything.).
I tried the following.
1). Charged overnight and tried on....Didnt work.
2). Opened the back panel and removed battery to mother board connection few times and connected back......it just vibrates . that's it
Pls help! Its out of warranty.
Click to expand...
Click to collapse
I had a similar problem, phone suddenly powered itself off and started vibrating. With the phone off and connecting the charger it started to charge, but after a while it started vibrating and overheating. I did a factory reset but the problem persisted. I flashed the raw firmware and it behaved properly for a while, but a few days ago the phone died. It does not turn on, does not charge, screen never turns on, no notification light, no vibration. But if connected to the charger it gets hot.
Left the mobile alone and tried to plug in after 35 days, IT WORKED. At first nothing happened but left it in charge for few hours. Later the mobile came back to life when I tried to turn it on..... 3 days in and still working just like it used to.... will have to take care not to let the battery drain below 20%
I am having same issue .. did you get it resolved ? Any luck ?
hello i'm having the same problem
will this method ensure that my data won't be lost?
---------- Post added at 02:53 AM ---------- Previous post was at 02:41 AM ----------
AnimeshBajracharya said:
Left the mobile alone and tried to plug in after 35 days, IT WORKED. At first nothing happened but left it in charge for few hours. Later the mobile came back to life when I tried to turn it on..... 3 days in and still working just like it used to.... will have to take care not to let the battery drain below 20%
Click to expand...
Click to collapse
can you tell me a bit more? i've got the same problem, you didn't download any drivers and just left the phone alone?