Remove Dopod WM6 ROM with a different - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi
My device is running Dopod WM6 (EASY_INSTALL_new_HK_WWE_wm6_Chun..exe)
OS 5.2.1437 Build 17944.0.3.1
ROM 3.54.707.3
Radio 1.47.00.10
HERM200
IPL-1.04
HERM200
SPL-2.03
but it don’t allow me to install any ROMs like Schap's 3.57a or someone else.
I do this from a XP pc with ActiveSync 4.5 and the ROM upgrade wizard cannot auto detect then tell to use SSPL.
But nothing happened except the upgrade get ERROR [260]
Did try to select SPL-1.11 or SPL-2.02 and if I do that it start upgrade to 1% then device reboot by itself.
Has also try with Hard-SPL-V7 but it refused to do something with that!

I have tried everything now but best I can get is 1% starts to download, and then the phone restarts by it self

is your phone superCID? thats probably the issue even though it shouldnt be if you have Splv7 on your phone which you do right? If not thats the first thing you need to do before you brick your phone!

I did install many different ROM before the last how works good
Dopod WM6 (EASY_INSTALL_new_HK_WWE_wm6_Chun..exe)
But what happen with phone with Dopod ROM has they build in some security ???

how can i step back to another ROM

Related

unable to downgrade/upgrade rom

I have dopod d810, i recently flashed my device to LVSW 2.0.0.7, radio 1.41, and also HARDSPL.
Now i want to upgrade to LVSW 2.0.1.1 latest rom. But after so many times i have done the upgrade procedure, after reset, it keeps going back to the previous rom.
The upgrade seemed to be working. but when it finished, i still got the old rom...
I have tried SUPERCID unlock my device. but no luck.
even worse I tried to revert back to original dopod rom, still no luck.
There is no error when flashing, it wen from 0% to 100% without problem, just it keeps reverting to old rom.
anyone??
klikman,
Check this link: http://forum.xda-developers.com/showthread.php?t=293632

Schap's WM6 Pro ROMs update Error 262

i´ve tried to run an RON update tp my tytn.
at all without success!!!!
every time i will get "error [262]: update error"
trying on
- Windows XP SP2 with all update
- activesync 4.5
on different machines
my tytn ist
ipl 1.01
SPL 1.09
and Schaps ROM 3.54c WWE
any idea´s for a solution
thanx
mhecker66 said:
i´ve tried to run an RON update tp my tytn.
at all without success!!!!
every time i will get "error [262]: update error"
trying on
- Windows XP SP2 with all update
- activesync 4.5
on different machines
my tytn ist
ipl 1.01
SPL 1.09
and Schaps ROM 3.54c WWE
any idea´s for a solution
thanx
Click to expand...
Click to collapse
Sounds like you have not read the instructions on how to upgrade your rom. There are many sources for the documentation. The easiest to understand are the upgrade guide by mrvanix. Maybe read about the unlocker/hard spl and read the wiki and mrvanix upgrade guides.
i have done the upgrade for a couple of times
every time the same way.
It work perfectly until the last update to schaps 3.54c
Now i get this error message
any idea?
try CID unlock.....search the WIKI
Maybe this will help you out... I have posted the error codes HERE...
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
thanx for this information
my tytn run´s fine - but the upgrade fails!!!
on the screen you can see "0% image upgrade in progress"
no further messages
on PC i´ll get the error [262]
after softreset everything seems ok
regards
When you run the update....select autodetect....sounds like you are running the wrong RUU for your SPL version...
....actually...update to HArdSPL v2.10 first...then run it. Your SPL at the moment is very risky to use and could kill your device......update to hardspl first.
thanx mrvanx's
your advice works great...
now i can upgrade my device to the current version ;-)
regards
262 update error
I just recd. my KAIS130 with the following:
Hardspl 1.81.0000, CPLD 8,
RomV: 1.56.405.5
Rom Date: 8/28/07
Radio 1.27.12.11
I have used two different laptops, usb ports, WINXP pro. The active sync 4.5works fine and is connected.
Trying to load HARDSPL V7 or Alex v52.ATT.162 ROMs i get 262 Update error. With hardspl it makes the ding sound disconnects the activesync and comes with error 260. i tried to disable the USB on the PC as recommended then it does not even recognize the kaiser. Did a hard reset on the whole device, reinstalled activesync several times. Some reason it disconnects my activesync. I have been reading and reading different forums for the last several days but cannot make it work. Can someone help please
maybe try to disable windows firewall
Tried disabling firewall too - nothing doing.
Configured a new laptop with XPPRO with no virus protection, firewall just bare bone. Copied HardSPL v7 and ran it same thing - active sync goes away, shows on the screen verifying info. reboots the kaiser and on the laptop shows "ERROR 260:UPDATE ERROR". Anyone any idea. It seems like it just does not want to load anything on the kaiser.
15Apr - Issue resolved with the new laptop. I was able to do hardspl v1 meaning downgrading I think from hardspl 1.81 and everything seems to be ok. Now i am able to load ROM with no problem - Whew!!
ROM HTC Cruise
Tengo la ROM de BEPE 0.67 Premium. Alguien sabe si hay alguna ROM mas nueva o mejor para prbar?
saludos y gracias.
ERROR [262] : UPDATE ERROR
I am getting this same error, follow the recovery steps and restart teh update (to radio 1.54.30.10) and it just continues in a loop. soft resetting does not help
anyway to get this bad boy out of the updater so i can use the PDA aspect of the hermes anyway? i tried to update the radio because it has been going quirky on me and saying NO GSM at startup
262 error updater error
Im trying to update from WM6.1 Pro to WM 6.5 built 21159 Beta 5 ROM but Im getting 262 error updater error. How can I get it to update?
Help with error: 262
SORRY to bother yu guys, but i think i ****ed up my X1 like i put da stock spl without downloading the original rom i already had an uploaded cooked ROM on it and when i was flashing the stock spl i got error 262 no matter wat i do the problem isnot going away all i get in the boot screen is a message saying:
Continue to upgrade ROM
Please wait...
If anyone can help that would be greatly appreciated
htc touch pro2 t-mobile
I Have htc touch pro2 t-mobile run´s fine - but the upgrade fails!!!
on the screen you can see "0% image upgrade in progress"
no further messages
on PC i´ll get the error [262]
htc touch pro2 t-mobile
help meeeeeeeeeeeeeeee plz.

My first problem: Screen goes black

I have just joined the community and updated my TYTN to 4.31 ROM - look great
I was wondering if anyone is facing my problem:
I have set in the Pwer settings to "turn off the device after XX minutes"
The device does turn itslef off, but it seems that only soft reset can get it back on!
The hard buttons are not responding, the devce cannot even accept calls!
Did anyone face the same problem and manage to resolve it?
As a workaround, I am currenty using, Not to trun off the device, which probably consumes alot of battery!
no i don't have this problem it is working OK with me with same schaps rom 431
did you update your bootloader? I would hard reset again. If that doesn't work then try to reflash. Make sure your bootloader was updated first though.
Lets me see if I got this straight
When I load the RGB screen, I see this information in the RED block:
HREMES200
IPL-1.01
SPL-1.40.Olipro
The Device information shows
ROM Version: Schap's 4.31
ROM date: 10/03/07
Radio Version: 1.16.00.00
What is the bootloader exactly?
What should I select when I run the Schap's 4.31 ROM, there are several options there
BTW - the OS is SLOW, is that how it is with every wm 6.1 for Hermes devices?
I got confused when I first flashed a different rom (after installing HardSPL Olipro) - I just choose Safe SSPL as a tutorial recommended I do, and I've flashed three ROMs now without an issue just by using the Safe SSPL option.
After reflashing (and updating to hardSPL) I managed to find out the problem - it was the hebrew language by Orange which has casued this.
After removing it all worked well (almost)

can't flash artemis, uspl not running correctly

i recently bought a artemis, and the last couple days i've been searching on roms, both cooking and flashing.
i've tested a couple roms, from vanilla to touch, b&b and others, every single one without a problem. for all of them i've user XP sp2 in a virtual machine (VMWare).
everything went ok, cid unlocking and flashing the roms perfectly, and as i finally decided to cook my own rom, i started looking for generic roms from htc, to see what they looked like, so i could had a better understanding on how to cook a good rom to settle my needs.
unfortunately, i flashed a rom, don't know for sure which, but it's from o2, and from that moment on, i could not flash anymore.
every time i tryed to run the uspl, i can't get the spl to 1.11.000. it stays on 3.07.000.
i've tried running several times in a row the uspl, then flashing, tried flashing a generic rom, hardspl, arte and uspl, tried running the .nbh from the sd with no success, tried getting into boot and flashing.
but the funny thing is, in the uspl, when it is running, and reaches 70% it jumps to 100%.
and whenever i try to flash it, obviously, i get the error 270 update error.
so, after that, any ideas? the artemis is running smoothly, without a problem, although not with its original rom, and locked to a different provider (it's cid locked to vodafone portugal)
i tryed to flash it to the official portuguese rom wm6.1, not a single problem, but still, the problem is there, can't use uspl to cid unclock and therefor, cannot flash a cooked rom to my htc.
so, any help and/or ideas?
anyone care to take a look?
bump
not a single reply?

spv m5000 upgraded to 6.1 and now no phone, help??

hi ive upgraded the rom on my orange spv to 6.1 20921 i believe, and since the os has run a lot better than the v5 that was on it, but the major downfall is that whenever i try to get the phone application up, nothing happens!, i cannot get the phone settings to even open up via wireless manager, and no error occurs just nothing happens, if anyone knows waht i need to do or any help would be appreciated
cheers
Welcome to forums
Have you tried a hard reset?
Have a look into the Wiki.
Good luck,
Hi, if hard reset doesn't work i suggest you to reflash your rom or another one and test.
Personnaly i got a problem, not the same, with phone, so i reflashed the rom and now everything is ok now.
i'd recommend you to flash you radio rom... not the os rom... check wiki for the radio only upgrade.... the problem is that the wm5 used old radio and some new wm6.1 requires new radio so i'll say flash your radio to 1.15 or 1.18 ...
Cheers
Rajiv

Categories

Resources