Guys,
Do you know of a WM5/WM6 utility that will lock the keypad controls when the screen goes blank after 5 mins on my Trinity? What I would want to happen is that I press either the power button to take it out of standby mode and activate all keys again as it is hen its in my pocket the buttons get pressed and aspects like the start menu or contacts open automatically.
What i want is like on the Orange C500 where you press * enter or something to activate the keypad.
Cheers
Hawk
Simply go to your settings-system.key lock. There you can enable this function without a tool!
you can try an utility for vijay555 at www.vijay555.com, it locks by phone with the standard lock utility (the today plugin included by default) and turns off the screen, you can assign it to a key to have both things done automatically.
when you power on the device, you will have to unlock it to get the phone pad activated.
The default keylock does not work! It locks the softkeys but it does not lock the hard keys on the control pad as they often get touched and do things like access contacts etc when i do not want them too!!!
The default Keylock works for me- Orange SPV M700 with WM6 MunRus ROM- selecting 'Lock all keys except power key when off' also disables the navigation and phone keys.
It needed a couple of soft resets for it to take though.
tried that and it does not work?
or use the Slide2Unlock, it works excellent.
I configured it to lock when Light is dimmed, and then turn of the screen after 15 seconds, but without putting device in standby.
Then I disabled standby in the Power panel.
I also assigned to manually start it when pushing the button next to the power button.
So now I can start the music player, push that button and it will keep on playing. and to get back, I push the power button and slide finger over screen.
Done.
Real handy.
Don't forget to give some coffee to developer.
where is that utility?
http://forum.xda-developers.com/showthread.php?t=314703&highlight=Slide2Unlock
Related
hi guys,
i'm looking for a program for my sx66 that will allow me to lock the hardware keys and screen when i place it in it's holster. i have tried screenlock 1.2 and mortsaver but they don't seem to work.
anyone know of any programs that do this?
thanks!
try settings ->system ->button lock
it is already build into windows
Isn't that designed for only when the phone is turned off? I'd like to keep the phone on and lock the keys.
The phone will keep functioning with keylock on just lock the keys and give yourself a call from another phone , you'll see it works
Doh! Why didn't I think of that?
You are referring to toggling the keylock on from within the programs, not pressing the power button (which I assume does power the unit off), correct?
Thanks.
The power button does not power off the unit, it just turns off the screen or if you hold it for a few seconds, it turns off the backlight.
you may try Start->Settings->Personal->Password along with Button Lock in the System Settings. This will have your keys completly locked.
Thanks guys. That will do what I need.
I think that mortsaver is sort of a work in progress. There is a beta that works way better, but the only place I've found it is here not on any website:
http://www.pdaphonehome.com/forums/...0aa759&threadid=37160&perpage=20&pagenumber=1
'
You can get the latest beta from the last or second to last page, but you might want to read the entire thread to get an idea of how to use the program. I think it will soon be a killer app up there with pzp
anyway to have a hermes device wake from sleep using any button?
that would work nicely with s2u2
discover your device
an important thing you should keep into consideration is that with WME you don't own only a phone but a simplified personal computer in addition.
surf your device and discover its abilities!
Hint: your device has a "Programs" folder and also "Settings".
Details: check Settings->System->Key Lock
I have done something like what you say, but the problem is that the buttons *also* activate the feature of the button you press. I think you just want all buttons to pull up s2u2.
I also would think that touching the screen should pull it up, but when you finally work out how to get that to work (it will), you end up killing your battery.
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
richkidd said:
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
Click to expand...
Click to collapse
If you use S2U2 you get this functionality, I don't know how to do it with normal screen lock.
Dave
Or if you use Throttle Lock you can use a pattern to unlock your device, and you can set it up that when you push the powerbutton it gets locked with the pattern, or that when you push the powerbutton it will wait a x given minutes and then your device get's locked with a pattern.
I don't know how to do it with normal screen lock.
i have this on mine dont know how i got it take it came with some app i have installed
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Homescreen plusplus (Batterystatus) has this option. You can select lock on standby, it uses normal wm lock app. Used it on my Wizard, not sure if it's compatible with the TP2...
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
aiaob said:
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Click to expand...
Click to collapse
Use TouchLockPro as locking utility. Automatically locks at power on and unlocks by light sensor. And you can configure a key unlock sequence. And with a slide to answer solution, you can only lock the hardware keys at incoming call.
if you simply press the power button that switches off the screen and locks all buttons.
uilt-in WM feature.
If you set a password it also automatically locks it
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
otohabibi said:
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
Click to expand...
Click to collapse
When not removed from ROM you will find it as \Windows\keylock.exe
Otherwise try: http://forum.xda-developers.com/showpost.php?p=5875933&postcount=5
I am still looking for auto lock at suspend. I don't want to install a program bringing with it 100.000 functions.
I dont see the point in adding extra features to a lock screen. its there to keep the screen locked and thats it lol
Anyways, try 'lock device GUI'
It just adds the function to lock the device when the power button is pushed (Sleep).
Keeps the old lock screen, only adds function
Yea check out LockDevice. I use it and it works great..
http://forum.xda-developers.com/showthread.php?t=542482
DeviceLock.cab Works As Well...
I had similar issue. So I installed "DeviceLock.cab" and added it as a Quick Link on HCT Sense 2.5 Homescreen. Now I just have to click on the link to lock the device. Once the screen if off the keys don't matter.
Also used "Lock Screen With Bottom Slider" for easy access.
I can't post links, but if you search for quote phrase, you should be able to find a download.
Hope that helps.
Try smartlock. Works perfect! Just install the cab, then it can be found in: Start/Settings/System
http://forum.xda-developers.com/showthread.php?t=505032
pressing the top button puts it in standby, tapping that button brings it out and calls random ppl in my pocket afew times a day...
Holding the end button and locking the decide locks it but dosnt put it in standby...
So u have to hold the end key choose lock then put it in standby.... if the standby key is then bumped it will make it light up and... keep your keys company?
Is there a way to make it automatically lock after 30sec and go into standby after another 30sec? as this is just rediculas lol
And i dont want the wimo password lock... i want the lock where u have to just slide the button to unlock it
And help would be much appreciated ^_^
Search S2U2 (Slide to Unlock 2). Unfortunately, on the TP2 there is an issue with the landscape mode being garbled.
S
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
+1
That makes a lot of sense!
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
hiya,
much appreciate for your comments. do you mean turning screen off as well as locking the screen..? so that when you touch the screen it won't come back on...?
I'm working on to prepare better version i.e. it would be on the home screen so that no clicking on start menu and then this app.
cheers
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
EgorLev said:
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
Click to expand...
Click to collapse
+1
screen off + lock at same time only pressing Powerbutton.
It work perfectly for me so as it is. I changed the left soft-key so that it will start "turn off the light.exe" .When the screen is off S2U2 will lock the screen. So I can turn off and lock the screen with only one click.
To change the soft key do this:
with a registry editor go to HKLM/Software/HTC/manila/ . in HomeLSKPath (left softkey) or HomeRSKPath (right softkey) write the address to "turn off the light.exe". HomeLSKText and HomeRSKText are the text for the softkeys.
That´s it!
update for touch diamond
hi everyone,
massive thanks to all those who provided replies. I have tried on my blackstone (Touch HD) and it does seems to turn off the screen plus all keys as well.
I can confirm that it doesnt lock all the keys i.e. doesnt lock the device on touch diamond model. I'll modify the program and upload the newer version with the feature of locking the keys plus turning off the screen.
once agian special thanks to everyone.
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
i like this application but i think the icon is really ugly..
Hi,
is there a possibility to do a screen unlock application which can be activated by voice commander? the situation is this...
I used voice commander to launch google maps while my hand is busy when the screen is lock. however, i will need a program which can be initiated by the voice commander to unlock the screen so that i can navigate the maps. Right now i will have to unlock the screen the normal way which i find voice commander redundant since i'll have to use my finger during lunching anyway.
Can you help me on this? Many thanks in advance. =)
Major_Sarcasm said:
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
Click to expand...
Click to collapse
Here is the app that has the feature which you prefer:
LockDevice => http://forum.xda-developers.com/showthread.php?t=542482
Thanks for the link!
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
carhigh said:
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
Click to expand...
Click to collapse
Hiya,
I'm working on the program so that you can have configuration option to simulate power button to put phone in sleep mode or jus to turn the screen off. This utility was just for people who want to save power whilst listening to the music, etc.
Please keep any ideas/suggestion coming. Much appreciated guys.
Watch the space guys....
That is great inítiative. I use the screen off function actually for the purpose to save power when navigation. screen off when there is a long straíght way to drive.
Put device to sleep mode will cause gps signal lost, which is not so nice.
I can image that there will be a lot of person who wnat to have different adds-on on this small application, it might be a solution to provide command argument.
Thank you.
I will try to see whether this one works for my purpose. Actually in my situation, I even don't want any key be locked as these keys are mapped for navigation.
How about screen toggle thus it is possible to map this application to a key?
awesome, i mapped the exe to a hardware key next to standby. now i can easily save power while wardr listening to music. ^_^
it combines very well with s2u2 locking function too.
big thanks!
tom_hungston said:
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Click to expand...
Click to collapse
Tom, may be it was to late to find your toggle light off switch, but it was very important for me to find it, thank you man, you solved a terrible issue for me, which is that programs stop updating (eg: twitter) when the device is in standby mode.
I heard that you can release another one, so my feedback is:
it takes about 2 seconds to turn off the light, isn't there any faster??? ))
This application is great. Combined with the S2U2 and HD Tweak i don't even have to use the power button at all. Device locked by S2U2 as soon as i turn off the light, waking up device by pulling out the stylus and rebooting with the help of HD Soft reset. Thanks
P.S. You should really add a decent icon, even though people can change it if they want to.