Develop Bugs

Several serious problems with Qtek 9090

I'm having several problems with my Qtek 9090
There's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off.
People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone.
I haven't been able to find a BT headset that works with it. They all have the same problem; The sound scratch so much they're unusable. I tried 3 different brands that all works well with my 2020!
The GSM link often "falls out" - even though there's plenty of link the phone doesn't work (nothing happens when I try to call someone). A soft reset solves this problem!
As you can see, I can hardly use the device as a phone at all I've had the device replaced once, but all the problems persists on the replacement.
Does anyone have similar problems?

1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!

Try a Motorola HS810 headset... works fine for me.

harry_mb said:
1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!
Click to expand...
Click to collapse
I've already tried Jabra Freespeak 250, which didn't work for me
No I haven't updated the ROM as I've been told by the supplier that no new version is available yet!
outz said:
Try a Motorola HS810 headset... works fine for me.
Click to expand...
Click to collapse
I also tried both a Motorola and a SonyEricsson BT headset, but I don't remember the specific models - they both scratched immensely

i use SE 60 and it works ok

As you said, the Jabra250 is pretty much unusable!
Crackling is not constant but goes in waves, even though I do not move.
Am at a bit of a loss what to do now... the device is great apart from this.

>> People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone
yes PBT read my other post
I have the same problem!!
it is scandalous to sel an device with this big defect!!

Sony HBH-660 works good for me.

People say that they can't hear me when I use the handset, but I don't have any crackling, etc with the headset and voice is clear. You just never know if the headset is going to connect when the phone rings though.

sound from screen
there's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off
Click to expand...
Click to collapse
I have this problem also, I was told to use the new rom but this has made no difference, Please let me know if you have found a solution
[/quote]

Guys,
the hissing coming from the screen is a power supply problem. keep swapping phones until it goes away! I used to build switching power supply and the hissing (in a system designed to operate well above 20kHz) is only able to be heared when unstable, inductor core or cap is broken. The hissing is very 'not normal'.
It appears that the Q9090 is standing out as having more problems than the MDAIII, one is the mic volume, most of the other phones are not complaining about this so there may be something with they way the Q9090 are updated or shipped.

With the Jabra 250, don't forget to pair it pressing BOTH the volume and phone button on the headset on discovery with the 9090.(On bonding, turn off headset, turn on again pressing both buttons)
Funny thing is, I had the cracking also. I deleted the headset in BT manager and paired it again as described above. Now it works ok.

Hi,
I bought a Qtek 9090 a few days ago and I also have the same problem with volume level. People can't hear me when speaking, either with the headset or base microphone.
Using a different headset doesn't help (that's even worse sometimes) but I didn't try a BT heaset (and I don't want to as it would raise potential connection problems). I'm going to contact Qtek for support on this...
Pierre

I too am having problems with the Jabra 250 BT headset and my SPV M2000. The Jabra 250 worked fine on the XDAII but is terribly crackly on the newer model.
This is even when pairing it with the enhanced pairing of pressing Volume Up and Phone button together to pair.
Any ideas?

qtek 9090 bluetooth problem
Hi All,
I have new qtek9090 with cellink bluetooth headset. It is work normal, but i am loosing connection to headset each time qtek go to stand by mode. I need to switch off/on the bluetooth in order to restore the connection. Any ideas?

I often get a message stating:
"The Bluetooth Radio failed to turn ON due to insufficient driver momory available. You must perform a normal reset before you can turn ON the Bluetooth Radio."
Does your device also give you this message?
Is it also using the Broadcom "Bluetooth for Windows CE BT-PPC/PE Version 1.0.0 Build 2200"?
Interested to know if you have the same problems with the same bluetooth driver.

same problem
My qtek 9090 shows te same problem

This is a known problem with the Blue Angel, unfortunately, until they bring out a fix, all you can do is a soft reset.

upgrade
hi all,
how can i get updates from www.imateclub.com?
I can't register there, because I have qtek 9090 and not i-mate
thanks

O2 Sourced info on which BT headsets work
See: http://www.my-xda.com/downloads/Other_Bluetooth.pdf

Universal - will it work with 2 bluetooth headsets?

Just out of curiosity:
Was thinking of getting a bluetooth caller ID clip like the Sony HBH-200 and also another bluetooth headset like maybe a jabra bt500?
Would the Universal be able to connect to both the headsets and work well?
Just out of curiosity, would like to be able to view the caller id number but use a different bluetooth headset to answer the phone.
Sounds like a lot of work, but I figure it's better than getting the BT800 where you have to look at the number and then put the headset on.
Well, if any of you out there has got 2 bluetooth headsets, would you mind trying it out?
Thanks.

I tried it last nite and it did not work as you expected. It was a great idea though. I was using a HBH-662 (Sony ericson) with a caller ID screen, and another BT headset. Only the second BT headset rings, and the HBH-662 did not respond.
I was thinking before the same idea, but I was expecting a watch (like Casio) that can display the Caller Name via BT. If anyone knows such product (watch) exists, I would love to know.

The Casio watch is a really good idea, but have you seen the size of the watch? It's humongous.

lie_ui said:
I was thinking before the same idea, but I was expecting a watch (like Casio) that can display the Caller Name via BT. If anyone knows such product (watch) exists, I would love to know.
Click to expand...
Click to collapse
Seiko look to be rolling one out. Still on the large size though...
http://www.akihabaranews.com/en/news-11282-The+Seiko+Instruments+Inc+Bluetooth+watch.html

Yah....big watches.
However, came across a software that allows you to link to multiple Bluetooth devices (I think that's what it does).
Can somebody try and see if it'll work with 2 bluetooth headsets then?
There is a trial version of the software:
http://www.bluesoleil.com/
If anybody gets a chance to try it out please post the responses here.
Thanks.

Qtek 9000
UNI_QTEK_13077_176_10900_WWE rom
Headsets:
Motorola HT820
BT800
Paired both headsets to the device.
Both devices rang on receiving a call.
With Jet software, it was able to display caller ID.
Was not able to answer the call from the HT820
Didn't try answering from the BT800
HT820 was not able to Voice Command after Jet software installation
Will test it out some more tonight.

You could just get a nokia HS-12w that way you can see who is calling without removing your earpieces !!!

I'm just being vain.
Would like to use a stereo headset without wires and also have a caller ID unit just to view the caller. Was thinking of something like the Nokia that you mention to clip on my front pocket just to view who's calling.

modem_man said:
HT820 was not able to Voice Command after Jet software installation
Click to expand...
Click to collapse
hi,
in another thread this is being discussed. appearently this is a "feature" not a bug anyway it is not connected to a special bt headset, but to all bt headsets (afaik)

Well...
After extensive testing, I have realized that my dreams of being vain is not possible....at least until somebody starts selling just a bluetooth caller-id display only - like the watch.
Anybody out there know of a bluetooth caller-id diplayer only besides the big ass watch?
Anyway, here's how I tested it.
Bear in mind that this is what I wanted to do.
Since I have a Universal, pulling it out and then twisting the clamshell, takes too long and it's too cumbersome to do.
So I wanted a caller-id display to display the caller-id (name preferably) without opening the clamshell and answer the phone via a bluetooth stereo headset.
Figured I test out the theory that having 2 headsets, 1 with caller-id and one with stereo where I can view the caller-id on one and answer the phone on the other one.
Tried it and true enough as posted above, it doesn't work.
Until there's a new bluetooth caller-id device out there, l8r.

You can check the new product from Cardo Systems. It's more or less the thing you want. On piece with caller ID and the normal headset.
http://www.cardowireless.com/scala750/

try to pair 2 bluetooth hands-free devices on one phone

Hello at all,
I've searched a long time for a solution, but I really couldn't find it.
I have an
- Ameo (same like HTC x7500, with original t-mobile WM6 german) and a
- LG Style-i HBM 700 - http://www.amazon.com/gp/product/B001CZICHA , for calling.
I had bought a couple of weeks ago a wunderful bluetooth bracelet LM 959. http://www.lm-technologies.com/ci/index.php?/products/details/38
Both, the bracelet and the Style-i want and could connect to my Ameo over the same profile (phone profile, hands-free).
I've tried a couple of days, but it doesn't run as I want:
I want that the bracelet will shake when the phone is ringing (that's normal).
And then I will accept the call with my LG Style-i. If the call finish, all should go again in stand by.
If the next call arrive, the bracelet have to shake first, and so on.
But reality is hard and bad:
If I power on the bracelet, and power on the LG iStyle the bracelet go in sleep and the LG Style-i is active connect to my Ameo. No action's could make the bracelet function, only if I power off the LG Style-i. But than I couldn't take a call (not with this brick on my ear)
I think both are using the same profile (hands-free). And only one could go in active, or ?
Is there a way to let both function, and as I want ?
I would be lucky for any suggestions.. any idea ?

I'm afraid I can't answer that with any experience, but I think the bluesoleil driver will allow connections to two devices.
When someone with more experience comes along, does anyone know if it is possible to connect two devices with different profiles.
I wish to connect my car kit (HFP) and an audio streaming connection (A2DP), to a kaiser, and keep them both connected.

ping, I want infor on this to for my ameo before I buy the bracelet!!

new status:
I've seen, that all entries in the registry between the braclet and the LG style-i are different. Not the channel entry : both are channel 0x2.
I've changed the channel from bracelet in the registry:
HKLM/Software/Microsoft/Bluetooth/Device/001b3500023b
from 0x2 to 0x1.
Bracelet connect with Ameo furthermore, but situation doesn't changed.
Now I will change the ROM from 6 to 6.1 (from original t-mobile 6 to sogarth 6.1) this weekend.
let me see ...

bad story ... sorry.
I've changed the ROM from original t-mob WM6 to sogarth WM 6.1 ROM but without any changes.
I've no solution to connect the bluetoorh bracelet AND the Bluetooth headset at the same time.
Any other idea's ?
please help ...

Not possible afaik. I personally tried it when I had two Motorola s9s and only one would connect at the same time :S.

Does anyone know if you can connect to *different* profile devices?
I want to connect a HFP device and an AD2P device.

ian_c said:
Does anyone know if you can connect to *different* profile devices?
I want to connect a HFP device and an AD2P device.
Click to expand...
Click to collapse
Hello all,
I'm currently using wm6.1 build 20273.1.3.3 cook (FInixNOver v3.6) on my Trinity with iDream BTSH01 + Nokia BH-102.
The BTSH01 can act as either "Hands Free" or/and "Wireless Stereo" (A2DP).
I can select which mode I want to use on that device by using the standard "Bluetooth Settings-->Device" menu.
The BH-102 is only an "Hands Free" device.
I successfully can listen music on the iDream and make/receive calls with the Nokia.
As you may guess, my main use of these combination is on the car! the Trinity is used as my MP3 player, my GPS and my phone with ear bud, while its battery is being charged.
The BH-102 works very smooth alone! just need to power it on, wait 2-3 seconds to ear the beep and start to use it, even while receiving a call (it happens a lot while I'm driving!).
That particular cook has the BT sound volume adjustment working very well!
The BTSH01 is tricky to pair... I always have to start it in "pairing" mode and do a BT search on the Trinity (I have a button on the "Today" for that!) to have it work properly. If I not do this way, the music is shopped in 500ms pieces !!!
I can only launch the music/sound app (Mortplayer and/or GPS app) after pairing it. If not, the sound goes out through the internal speaker.
By having the BTSH01 decoding music, the HTC becomes slower (still ok for the GPS app)!
Now, combining both... I'm using both since a couple of days and I still have no procedure to have both running ok (BTSH01 as "Wireless Stereo" and BH-102 as "Hands Free") at first shot!
Sometimes the BTSH01 start to decode my calls, sometimes the BH-102 is not able to pair ... it's always been asked the PIN code.
But, once both are up, I have no more troubles and can start my trip!

i'm using an r35 itech set as handsfree...although it can be switched to include a2dp. however, i also have a sony ericsson car kit that's set for a2dp or wireless stereo. thus, when i'm in the car my u1000 automatically connects to the ericsson and thus streams the music. any calls that come i can answer through my r35. when i leave the car, the ericsson then disconnects with my u1000 (either through range or when i shut off the ignition). my r35 is continuously bonded and thus any calls are answered through it.
i don't think it's really possible to connect 2 bt devices with hands free profiles at the same time. i tried that with both my r35 and ericsson kit....if the first device bonded is my r35 a message appears on my ameo indicating an error when i try to set hands free. it only accepts wireless stereo.
cheers

I don't think so. In my opinion it's not possible. u can use stereo.

Bluetooth car-kit: hands-free and stereo audio

I have been using the Touch Pro 2 for a little while now, and I must say: no regret at all that I've bought it.
But the reason I post here is because I'm having a problem with my car-kit and the Touch Pro 2 when they are connected through bluetooth.
First of all, some data about the car-kit
Car stereo: JVC KD-BT22
Bluetooth functions: handsfree calling and Bluetooth Audio Streaming
Bluetooth version: 1.2 certified
Profile: HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3
The situation:
When I pair the devices I can check two options:
1) Handsfree
2) Stereo Audio
This should be fine, but the problem comes next:
- When I both check handsfree and stereo audio, I don't get any streaming audio (I just hear about one second the song which is playing at the phone), if I call or get called nothing hapenned except the display of the phone showing the caller. The car-kit just keeps playing (for example) the CD.
- When I uncheck the stereo audio, just connecting the handsfree everything works "fine" (some small problems, not mentionable).
- When I only connect stereo audio the same happens as described before: the song which is playing at the phone I hear about one second, and after that it's silenced (the song is still "going forward", but no sound, nor on the phone, nor on the car stereo).
I've tried different set-ups, searched the forums and didn't saw anyone with this problem/no sollution, so I hope someone could help me.
This happened with the Stock Rom and also the custom rom I'm using right now, no difference. When I connect a stereo headphone (from Nokia) through Bluetooh, everything works fine.

don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!

Well, that in a case makes sense...
The carkit also connected to my phone when discovery was turn off. Seemed strange to me already. A little, maybe stupid, question: what do I need to swith off/turn off on the phone so the phone won't connect to the carkit, but that I have to let the carkit connect to the phone?

HTC aware
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.

apv245l said:
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
Click to expand...
Click to collapse
I also tried mailing HTC about this problem. The reply wasn't so hopegiving
"We're sorry, but the carkit isn't compatible. Please fill out the form for our technical support team"... Summary: I've not been too lucky with this combination
Hope they might do something about it after all. Me just thinking that Bluetooth = Bluetooth, but it's more complicated than that.

I also have the same problem with JVC-KD-AVX2 streaming audio. couple of times i did manage to get it to work, but once the stereo is turned off and on, i lose the streaming again.
i called HTC and emailed them. one said my stereo is not compatible, but i did have it working kind of.
not sure what the problem is as the touch pro1 worked fine. also my friends N97 worked fine

did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work

nemo0405 said:
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
Click to expand...
Click to collapse
Sorry for my late reply.
I can't connect/pair the phone using the stereo, to bad.

Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help

DownNeverOut said:
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
Click to expand...
Click to collapse
Which Pioneer are you using? I'm using the F700, and for some reason it won't mute the radio when in a call. I haven't gotten time to mess around with it much though. Reading incoming texts would be great.

i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.

nemo0405 said:
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Click to expand...
Click to collapse
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark

qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark

qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
RADRaze2KX said:
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
Click to expand...
Click to collapse
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.

RADRaze2KX said:
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
Click to expand...
Click to collapse
Yes i do have diifferent ringtones for contacts and also different pictures. The problem is in the contacts name. When i remove the name and leave it unnamed it works fine.
Thanks for your reply..

Aaron McCarthy said:
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
Click to expand...
Click to collapse
it did not fix my problem but thanks anyway. The problem im facing is that any contact saved with a name wont be recieved on the car kit. while if its left unnamed it will work fine.

[Q] Bluetooth Problems

Hi,
I have a bluetooth phone in my car, when I first connected the HTC Desire HD up, it had no problems, it paired and everything looked fine... around 10 minutes later, I noticed the bluetooth had simply disconnected from the car but was still running on the phone. I tried to reconnect it up to the car but it wouldn't, I then turned it off, and turned it back on.. it struggled to come back on, but after a few attempts it did come on and the car connected again...
About 5 minutes later the same thing happened again. At this point my phone started to really slow down, I looked in watchtower and the bluetooth was at the top of the list, soon as I turned off bluetooth the phone was responding fine again.
I have since tried connecting to the car multiple more times and have contacted HTC about it, but it seems to disconnect at random times.
Has anyone else experienced similar problems? I heard of similar problems with the original desire so wondering whether it could be something similar.
Kev

Hi Kev,
I am having similar problems with my Desire HD and Audi in car bluetooth system. I posted on another forum and found others were finding the same...
I pair my phone and within couple of minutes the phone has disconnected and won't re-connect.
Not found any definitive answer as yet, but seems BT in this phone isn't so good. Also read a post saying HTC were aware of this but an update wouldn't be available for sometime.
Hopefully someone else can shed some light!
Ben

I also noticed this the last few days with my Bury CC9056 carkit. I have my DHD since October 18th, and up till last friday it connected fine. Since then it connects to the carkit, but within a few seconds the connection is lost...
Sent from my Desire HD using XDA App

Me too. My connection to my Jabra car kit is stable once connected... but trying to get it connected in the first place is a total headache.
Never had this problem with my Desire, so why HTC should change the Bluetooth function in the HD is a mystery.
Sent from my Desire HD using XDA App

tbh i'm glad its not just me thats experiencing problems meaning it could be a software problem rather than something with my handset in particular.
I have been in touch with HTC about this, and I have just sent them the link to this thread so they can see i'm not the only one with this issue, so if anyone else has this issue it may be good to try and keep it all in here.
quentin_rayner said:
Hi Kev,
I am having similar problems with my Desire HD and Audi in car bluetooth system. I posted on another forum and found others were finding the same...
I pair my phone and within couple of minutes the phone has disconnected and won't re-connect.
Not found any definitive answer as yet, but seems BT in this phone isn't so good. Also read a post saying HTC were aware of this but an update wouldn't be available for sometime.
Hopefully someone else can shed some light!
Ben
Click to expand...
Click to collapse
Mines also the audi in car system - do you find that you struggle to turn the bluetooth off and on again once it disconnects or that your phone becomes a little laggy until you turn the bluetooth off?

Yeah - I use the bluetooth widget on the home screen and once it disconnects, it will either take ages to turn off and on again, or it takes 2 presses to turn off.
I have just purchased a Plantronics 230 headset as need bluetooth for my job and it works perfectly - it's no where near the quality of the in car one though.
Also booked in my Audi as it's still under warranty - spoke to them on the phone and they said they will try and update the firmware but the Desire HD isn't on their supported phone list. Have seen a copy of this and not many phones are!!

I would of thought though, that as long as the phone does connect to the phone system in the car that it is compatible.
I have had 30mins once out of it before it disconnected and it was absolutely perfect in that time, including the phone book etc.
I do believe its something to do with the bluetooth on the phone as its a bit strange the way it struggles to turn on again once it fails.

quentin_rayner said:
.. Also booked in my Audi as it's still under warranty - spoke to them on the phone and they said they will try and update the firmware but the Desire HD isn't on their supported phone list. Have seen a copy of this and not many phones are!!
Click to expand...
Click to collapse
That really hacks me off. I mean, BT is a standard. The only reason Audi can give for not supporting a phone that supports at least the same level of BT as them is that they (Audi) do not adhere to the BT standard.
Now, we all know in real life that cars and phones have problems/bugs/whatever BUT unless they can show that there is indeed a *bug* with the phone then the onus should be on Audi to support it.
Dave

Just for the record, it is not just Audi. With me it is together with the Bury carkit, where it first worked fine. (and also works with all other phones...)
Leon
Sent from my Desire HD using XDA App

I can confirm the issues with the BT. I have a parrot Mki9000 in my car and the first time when i tried to connect the DHD , the phone stopped to respond and I was forced to restart it. Since then the phone is paired with the car kit and works fine in a2dp mode for playing music, but when i try to make a call it simply not work. Yo better discribe the problem I will give an example:
The phone i properly connected and playing music, then it's ringing, but the ring sound is coming from the phone speaker not from the car. Then If i answer the call the sound comes from the phone (it shows that there is connection to the car kit). I've tried to press the speaker icon and there is a list with output devices (the phone, loudspeaker, and my car kit) I've tried to select the car kit several times , but there was no success. When I close the phone the music start to play from my car's BT system , so I think there is a problem with the handsfree function/protocol only a2dp works great , and I didn't have any issues with it. Also I've tried file transfer via BT, it works fine two.

Mitsubish Outlander carkit
I can confirm the same issue with the Mitsubish outlander carkit. It even happens that it drops the conversation. sometimes it's ok for half an hour, sometimes it disconnects after 1-2 minutes.
I also have a Jabra (bluetooth) headphone and noticed that if you pick up a call on the phone the sounds doesn't route to the headphone. If I pickup on the headphone it works fine.

ZoidAndroid said:
I can confirm the same issue with the Mitsubish outlander carkit. It even happens that it drops the conversation. sometimes it's ok for half an hour, sometimes it disconnects after 1-2 minutes.
I also have a Jabra (bluetooth) headphone and noticed that if you pick up a call on the phone the sounds doesn't route to the headphone. If I pickup on the headphone it works fine.
Click to expand...
Click to collapse
I have a Pioneer head unit with BT in the car and that seems to work OK, not withstanding the fact that the HU has BT issues of its own (hardware fix needed - I'll get a new unit rather than fix it as I want one with A2DP) but once connected it works fine.
I have a Plantronics headset that seems to exhibit the same problems as your Jabra. At least if I use the phone to answer the call the sound comes through the phone. Also, if I have been using the headset the next call I make goes through the phone speaker which is a pain.
I'm wondering if HTC are routing the sound through the device that's actually *controlling* the call? So even if a headset is paired and connected to the phone, if you use the phone to make the call, as most people would, then it assumes that that's where the sound should get routed. If so, doh .....!!!!!
Just to add, if the sound does get routed to the phone you can use the 'choose speaker' option on the screen to route it to the headset but you shouldn't have to do this.
Anyone reported these issues to HTC and got a meaningful response?
Dave

I did send an email to HTC. Their wonderfull answer was about: "is your phone mentionned in the compatabilylist of the carkit, if not drop the problem there"...

I am still waiting for a response from HTC.
Mines got to a point now where I cant even make a call, it connects to the car, I go through phone book (on car) choose person to call, press call.. it tries for a couple of seconds then comes up disconnected, about 10 seconds later the phone disconnects from the car and will nto reconnect.
My phone then lags like mad until I turn bluetooth off which according to watch tower is taking up about 80% of the CPU.

any updates/solution to all these problems ?
I need it to work with MW600 before buying Desire HD

Last contact I had with HTC is they told me it had been escalted to the software team, so i'm guessing next time a software update comes out it could come about in that, but at the minute no still not fixed.

ZoidAndroid said:
I also have a Jabra (bluetooth) headphone and noticed that if you pick up a call on the phone the sounds doesn't route to the headphone. If I pickup on the headphone it works fine.
Click to expand...
Click to collapse
I've always thought that that's the way it is on all BT headset phones, it makes sense, if the incoming call was for my girlfriend, she can answer from the phone itself, and it automatically routes this through the phones speaker, and if it was answered from the headset, then it routes to the headset.. makes sense to me, I think it's quite good that it does that!

Do any of you have the process com.android.phone crashing when making a phone call through BT?

Ditto my mitsubishi outlander factory bt system. Seemed to work fine first time but then disconnected during first call and would not reconnect for days. Then after connecting not all functions would work ...no incoming call alert on car system, no dialling from car etc. I know the car system is fine as all functions work perfectly with my old nokia xpress music.
Sent from my Desire HD using XDA App

I trust that all of you bother to report this to HTC, at least once per instance ?
- otherwise I don't know when they'll fix this..