Develop Bugs

WM6 and SD-HC cards

Hi there,
Has anyone tried to put a SD-HC card on a WM6 upgraded device ?
I read somewhere that they may be compatible with "some" older devices via a firmware upgrade, so..... I was wondering..... if a 8Gb card would fit my prophet ^^
Anyone has one near his hands ?
Thanks !
niKo

6 GB SDHC Card

hi,
i got a 6 gb sdhc card for my htc p3300 and i want to use it but my windows mobile 6 wont accept it i got a Artemis touch 2.1 WWE rom on it
please have some body an firmware update or a dll/cab/reg fix ???
greats antonius

As far a I know sdhc memory cards are not suported on the artemis.
It just doesnt have the hardware to support it...
Check out http://forum.xda-developers.com/showthread.php?t=311839
The Heed

i read that there is a driver fix !
i read that if you donwload this driver SDIO Hx version 1.1 then it works.
as any one has this driver for me????

http://forum.xda-developers.com/showpost.php?p=1534542&postcount=69
Either HTC wants to say that they support non-SDHC 4 GB cards which probably should work anyways or that they are going to support SDHC in the official release.
I've read many discussions on that SDHC and that it is only a software problem on the Artemis and that someone from this community got sdhc working on a HTC device which did not natively supports it.

e-mail to HTC
Good Morning Customer, Thank you for contacting HTC Europe.? There will be an updated ROM for your device soon but we can not give you a specific time on this.? We can only guarantee a 2GB card working on your device and can't guarantee the 6GB working, even with the ROM update.

I do not understand how is it possible that noone knows whats exactly the difference between SD and SDHC.
there are so many discussion on this topic, and no definite answer.

Trust they do...
drkbg said:
I do not understand how is it possible that noone knows whats exactly the difference between SD and SDHC.
there are so many discussion on this topic, and no definite answer.
Click to expand...
Click to collapse
I want to believe its like the difference between a cat and a cattle, firstly obviously in the name and also possibly in the compression and algorithms employed.

but still there should be some kind of RFC it's not secret stealth technology... but I can't find anything in the "internets" SDHC is like a myth... people know that it's out there but cannot explain how it happens...

Sdhc Working In A Touch!!
My friend at work has just bought the touch on t-mobile and managed to get a free 4GB SDHC card with it, Il take a photo to prove it so I cant see how its working in Touch and not our devices....

mavisdavis said:
My friend at work has just bought the touch on t-mobile and managed to get a free 4GB SDHC card with it, Il take a photo to prove it so I cant see how its working in Touch and not our devices....
Click to expand...
Click to collapse
Different hardware and different drivers. No mystery to it!

Yep - absolutely right - no mystery to it. In fact, SDHC is a published standard.
It is different from SD in that it uses block mode addressing instead of byte mode addressing, so unless the firmware in the device controller is designed to support botht byte and block mode addressing, it won't work.
The SD card controllers in some devices have been designed to support both types of addressing and some haven't, because they were designed before the new standard was published.
The Artemis/P3300/Orbit was not designed to support block mode addressing within the firmware, so until either HTC or someone else very clever provides an update to the SD card device controller that provides block mode addressing, the SDHC cards won't be recognised in the SD card drive...

rickgillyon said:
Different hardware and different drivers. No mystery to it!
Click to expand...
Click to collapse
thats it, different hardware wont be same at all bro,.

Hey, for more than 4gb sdhc you need sdbus.dll and sdmemory.dll from a device with wm6 aku 0.3.1+ (build 17944 or higher) and update os to 17944 or higher, no other way

sp3dev said:
Hey, for more than 4gb sdhc you need sdbus.dll and sdmemory.dll from a device with wm6 aku 0.3.1+ (build 17944 or higher) and update os to 17944 or higher, no other way
Click to expand...
Click to collapse
have you checked that just by replacing these .dll-s it will work?

If you have os rom higher than 17944, you should only update these 2 files - tested on loox 560

Could you post the 2 dll and I'll give it a try.

http://rapidshare.com/files/59328091/sd.7z.html
here you go - copy 2 dll to \windows and install certs.cab

Thanks for that, unfortunately it didn't work.

Just double checking but the files you mentioned earlier were sdbus.dll and sdmemory.dll , but the zip file contained sdmemory.dll and signer.dll. Did you mean to send these, or am I missing something?
Thanks

jupp, sending the right sdbus.dll - file would be great!

8gig sdhc working fine!!!!!!!!!

just thought i'd post to let you know my findings..my mrs just got her new n95 delivered with an 8 gig sdhc after a lot of ear bashing she gave in and let me have it..quickly flashed O2 premium with the sdhc fix and hay presto an artemis with the power of an iphone!!!! way hay many many thanks to bepe and meschle for all their hard work..!!!!!

Thats good news! But since I could not find and 8GB easy/cheap ive ordered a 6GB at a local store which will arrive this week. Looking forward to get that working too!

I've seen the 8gb SDHC advertised on amazon.co.uk for £59.95
Here>http://www.amazon.co.uk/Sandisk-retail-packed-PRE-ORDER-NOVEMBER/dp/B000WH6H1M/ref=pd_bbs_sr_3/026-3808303-1398038?ie=UTF8&s=electronics&qid=1194980322&sr=8-3
Anybody seen any cheaper?

Twiggerdingo said:
Thats good news! But since I could not find and 8GB easy/cheap ive ordered a 6GB at a local store which will arrive this week. Looking forward to get that working too!
Click to expand...
Click to collapse
i'll wait for the SDHC patch to be released as a CAB before i go and buy any bigger cards... apart the fact i don't even fill 1GB on my 2GB card, dunno what u guys need so many GB for, hehe.

zandadoum said:
i'll wait for the SDHC patch to be released as a CAB before i go and buy any bigger cards... apart the fact i don't even fill 1GB on my 2GB card, dunno what u guys need so many GB for, hehe.
Click to expand...
Click to collapse
Found this today, but still havent got the card to test it (and already flashed the new SDHC supported Rom.)
http://rapidshare.com/files/69286158/SDHC_WM6.zip
SDHC Driver
1) Install SDHC.cab
2) Overwrite /Windows sdbus.dll sdmemory.dll
3) Install Certs.cab
Soft reset.
Hope you feel lucky... Worst case is a hard reset i guess.

IT's my post hihihi it working
http://forum.xda-developers.com/showthread.php?t=344338

Twiggerdingo said:
2) Overwrite /Windows sdbus.dll sdmemory.dll
Click to expand...
Click to collapse
i tried this long ago, with the older patches (that didnt work)... and the problem is i cant overwrite those dll as they are protected by system
so, i guess i'll have to wait some more for a CAB that does overwrite those files for me properly.

lepsyfou said:
IT's my post hihihi it working
http://forum.xda-developers.com/showthread.php?t=344338
Click to expand...
Click to collapse
well, that's not artemis specific and as some ppl. in that post reported problems on their phones, i guess i'll have to wait some more for a 100% artemis tested CAB

zandadoum said:
i tried this long ago, with the older patches (that didnt work)... and the problem is i cant overwrite those dll as they are protected by system
so, i guess i'll have to wait some more for a CAB that does overwrite those files for me properly.
Click to expand...
Click to collapse
I do not know if this patch is pecially for the artemis, of just have to work on all WM6 devices.
To copy a file and overwrite a ROM file, you will have to use totalcommander or resco explorer. Copy the file with the PC to your storagecard. Then disconnect the PDA and use totalcommander tot copy it into your windows folder. It wil ask you if you want to overwrite, click yes.
Done!

Twiggerdingo said:
I do not know if this patch is pecially for the artemis, of just have to work on all WM6 devices.
To copy a file and overwrite a ROM file, you will have to use totalcommander or resco explorer. Copy the file with the PC to your storagecard. Then disconnect the PDA and use totalcommander tot copy it into your windows folder. It wil ask you if you want to overwrite, click yes.
Done!
Click to expand...
Click to collapse
Ok, I couldn't do this either, I always got the message cannot overwrite files.... I have run USPL and tried again and the files have been overwritten no problems.
Will test SDHC card now

nicko666 said:
Ok, I couldn't do this either, I always got the message cannot overwrite files.... I have run USPL and tried again and the files have been overwritten no problems.
Will test SDHC card now
Click to expand...
Click to collapse
No Joy, am I doinf something wrong here?
I have B&B4.3 and followed the instructions

so you 1 installed the shdc cab, then copied and overwrite succesfully and then installed the cert.cab?
Then it doest not work i suppose. Best option till now is to flash 1 of the new roms i guess (with the SDHC support on them).

Take this one. ;-)
Its easy, only install the Cab and Softreset. Thats all. ;-)
Geets Danny.

there is NO way at this point to install sdhc driver by cab!
http://forum.xda-developers.com/showthread.php?t=339226&page=68
Ddriver said:
Take this one. ;-)
Its easy, only install the Cab and Softreset. Thats all. ;-)
Geets Danny.
Click to expand...
Click to collapse

And why is working???????????????
Look the pictures. Testet and is true!
http://www.ppc-welt-community.info/community/showthread.php?t=118132
Greets Danny.

NikMel said:
there is NO way at this point to install sdhc driver by cab!
http://forum.xda-developers.com/showthread.php?t=339226&page=68
Click to expand...
Click to collapse
have a look on this thread:
http://forum.xda-developers.com/showthread.php?t=344338
cheers

Not so secure!
I took some time to see what kind of .cab install for SDHC drivers could be the best one. I ok with SDBus.dll and SDMemory.dll, but not sure with this Cert.cab file that could be opened with winrar and finding an .XML file.
Look at this TXT file down.
Well! As seen on many posts on the net, SDHC USES THE SAME FORM FACTOR as SD, but the SD 2.0 standard in SDHC uses a different memory addressing method (sector addressing vs byte addressing).
The following compatibility issues between SD and SDHC cards and devices can arise:
Devices that do not specifically support SD2.0/SDHC do not recognize SDHC memory cards.
Some manufacturers have produced 4GB SD cards that do not conform to the SD2.0/SDHC, which are incompatible with existing SD devices, and are also incompatible with SDHC devices. As of late 2006, the simultaneous availability of non-standard 4GB SD and 4GB SDHC cards,
and the incompatibilities between SD and SDHC have caused a great deal of confusion among consumers looking to buy memory for various devices.
See: http://www.sdcard.org/about/sdhc/
Well if some people are happy with their new SDHC cab installation, could you specify the type of the memory card, your OS (WM5,WM6), which version (bepe, Tom, Meschle, Aje, etc) and your HTC product, then we could compare and find why is it working and not!

I have Mio A701 and etgen driver works on it but this drivers are not working on our artemis! This is only an artemis thing.
Well if you want to try it just make a backup of your system then try it.
If you want I can make a cab for you.
This works only when you make a rom and include this drivers.
Ddriver said:
And why is working???????????????
Look the pictures. Testet and is true!
http://www.ppc-welt-community.info/community/showthread.php?t=118132
Greets Danny.
Click to expand...
Click to collapse

I have installation the original HTC-WM6-ROM in GER (http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades) (see the picture)
and after the Cab (SDHC-Artemis.cab 119kb http://www.ppc-welt-community.info/community/showthread.php?t=118132)
(See Post1 "neuer SDHC-Treiber zur Unterstützung von microSD Karten höher 2GB:").
Before dont work my original 4GB SanDisk MicroSDHC Class2 Card (SDSDQ-4096-E11M) in the Artemis!
I dont now, why you dont believe me!
This Cab work 100%!
Greets Daniel.

Ddriver said:
I have installation the original HTC-WM6-ROM in GER (http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades) (see the pictures)
and after the Cab (SDHC-Artemis.cab 119kb http://members.cable24.at/immogroup/HTC-P3300/SDHC-Artemis.cab).
This Cab work 100%!
Befor dont work my original 4GB SanDisk MicroSDHC Class2 Card (SDSDQ-4096-E11M) in the Artemis!
I dont now, why you dont believe me!
Greets Daniel.
Click to expand...
Click to collapse
1) where did you get this CAB from?
2) your card is probably a MICROSD 4GB, and not a MICROSDHC 4GB, that's why it works for you.

NEW ROM: MDA-PRO offcial AKU3.3 ROM with SDHC support

Download here:
http://218.93.115.138/D900/wm5/T-Mobile/UNI_TMO_WWE_SDHC_SUPPORT.zip
nk.nbf for update
readme.txt for help

Gonna download and have a look under the bonnet to see what's changed.
Psi

PsiDOC said:
Gonna download and have a look under the bonnet to see what's changed.
Psi
Click to expand...
Click to collapse
Is it good? There r somethig new? Waitig for ur comments

It's basically the original T-Mobile AKU 3.3 rom complete and intact. According to the readme with the rom the SDHC.CAB is included in the windows folder and you install it manually, however when I unpacked the rom I couldn't find .cab file anywhere. I was interested in seeing which version swat4 had bundled in there.
Psi

Sry,new one update with sdhc.cab this day.
Yes ,this one is based on original rom with three DLL files replaced for SDHC support

Has anyone tried it yet?
how is your rating of this ROM?

Great ROM
I've just installed the ROM.
Startup memory from hard reset is 33MB (out of 49.70MB)! No program is running on the list.
Free storage memory is 39.23MB (out of 43.50MB) [I wrote in an empty Ext ROM].
My storage card is not shown (maybe have to turn off the SDHC option somewhere). Mine is a standard SD.
A strange thing is on the Device Information, the Flash Chip type is shown with M-Systems Instead of the previous G3 on O2 ROM.
There are T-Mobile branding at the splash and at the phone, not every where. It is easy to be fixed.

swat4 said:
Download here:
http://218.93.115.138/D900/wm5/T-Mobile/UNI_TMO_WWE_SDHC_SUPPORT.zip
nk.nbf for update
readme.txt for help
Click to expand...
Click to collapse
I have been trying to download this file by the download manager, by Firefox, by IE but each time the download stops at 99% showing 51.2Mb which is the size of the complete file but it stays at that.
Can you post another link please

Status
Verified working 100%
Stable as always, speedy, SDHC card fully resolved... video call is working
Multimedia works great (using TCPMP player)
Although i find the Windows Media Player is skipping tracks after few seconds... not sure why... temporary countermeasure, i am using TCPMP player to play songs although i prefer Windows Media Player to play songs..

swat4 said:
Sry,new one update with sdhc.cab this day.
Yes ,this one is based on original rom with three DLL files replaced for SDHC support
Click to expand...
Click to collapse
If this is the same as ROM AKU v3.3, but with SDHC support, it would not be enough to install the SDHC.cab?
Greetings.

But with this ROM, there is anyway the bug with SDHC*?
*sometime my SDHC 4GB by Sandisk is invisible

alex783 said:
But with this ROM, there is anyway the bug with SDHC*?
*sometime my SDHC 4GB by Sandisk is invisible
Click to expand...
Click to collapse
This ROM SDHC driver is the best i have seen... 100% reliable, never went missing or hayware or invisible or cannot wake up from sleep... better than the ones in cooked WM6 ROMs... but you must flash this ROM with the particular SDHC drivers built in... external SDHC.cab does not work properly...
I am using sandisk ultra II 4GB SDHC card...

would it be possiable for us to get those drivers, and attempt to use them on a different rom??

Problem with VideoCall on this ROM
I just flashed this ROM. everything works just fine, sdhc.cab as well, but videocall isn't working. I don't know where's the problem.
no incoming and now outgoing vidcalls.
I havent flashed radio, only ROM.
I'm using 1.15 version radio.
Please help ASAP.
best regards.

Dear swat4,
Can it support 8GB SDHC Class 6

Antigen said:
I just flashed this ROM. everything works just fine, sdhc.cab as well, but videocall isn't working. I don't know where's the problem.
no incoming and now outgoing vidcalls.
I havent flashed radio, only ROM.
I'm using 1.15 version radio.
Please help ASAP.
best regards.
Click to expand...
Click to collapse
Video_Call Button Enable

bennyyen said:
Dear swat4,
Can it support 8GB SDHC Class 6
Click to expand...
Click to collapse
only show 4G ,but u can use above 4G,
or u can make two disk partition

cant download, it asks for password. Any help?

what do u mean only show 4g?
i just buy a 8gb sdhc,and i am waiting for it now.i cant use it?or maybe i can with other rom?

I have a standard 2 GB SD Card (Sandisk). I can't see it, if I not install SDHC.CAB
If i install sdhc Storage Card is visible but i have problem with iGO navigation.

info patch sdhc for universal (qtek 9000)

hi to everybody and you excuse my non perfect nglese.
I would want to ask a favor.
it would serve me the patch for the cards of memory sdhc for my universal (alias qtek 9000).am I more than one of it by chance?
would you send me the correct file for my universal?I have seen that I am a pò and not sò of it which to use.(or you write the link.).thanks to everybody
I forgot, I use mobile windows 5

This is the cab.
Testet on HTC Universal with WM5 and WM6, Fujitsu-Siemens PoketLoxx N560 with WM5 and Sprint IP-w830 with WM5.
It is testet with a 16G SDHC card.
Have fun.

sdhc problem
Hello this site is fantastic! Are hours that I have lost my updating qtek 9000!
THANKS TO ALL YOU!
But by neophyte I have a problem: I have a Scan Disk Ultra 4gb sdhc I downloaded your file sdhc.cab but I really do not know what to do now!
Please help me
You are great

put the cab on ya device (microsoft active sync) then run it from the
file explorer

YOU are FANTASTIC!
Another fast question: where to put the file pbar15.exe?
Thank you and good evening to all

problem 4bg not 8
hi, I have a problem.I have installed sdhc.cab, but my universal reads 4 gb instead the memory it is from 8.

hi, please help me i have a memory card A-Data turbo sdhc 8 Gb for my i-mate with wm 5, i have download sdhc.cab, but now i read only 3 Gb, how I can make in order to resolve the problem? thank for answers me .....

hi there, what you need is SDHC777.cab also known as sdhcv2. here is a link to it but i think its been renamed
http://forum.xda-developers.com/attachment.php?attachmentid=72806&d=1204022607
try it worked for me

problem 8 gb universal
hi, unfortunately, not function with wm5 aku 2.
I have tried her all but not và, at times it goes out me "any installed card."
the connection fà to unload sdhc.cab and he/she reads me the memory from 3.5gb instead of 8

thanks very much, i think that i change WM5 in WM6, please can you give a link where download WM6 version italiana???

You are OFF TOPIC here.
However, you can try here

highc said:
This is the cab.
Testet on HTC Universal with WM5 and WM6, Fujitsu-Siemens PoketLoxx N560 with WM5 and Sprint IP-w830 with WM5.
It is testet with a 16G SDHC card.
Have fun.
Click to expand...
Click to collapse
thanks dude!!
workin

Hi...
Tried them both... and no one is working =S
Only recognizes 3476 MB of my 8GB Sandisk MicroSDHC
Could u help me?
I'm using a Qtek 9000 with WM 5.0.