Hello,
I wanted to get a car holder for my MDA Compact III,
do you guys recommend an air vent car holder or a windscreen mount phone holder?
Have a look at the Brodit range they do a nice holder active and passive and a number of options to hold the unit in your car. I use the Brodit and HR holders in my vehicle - have a read of http://www.pocketgpsworld.com/broditartemis.php for a few details - Mike
thanks for the reply,
is the HR one the windscreen mount phone holder?
The write up contained Brodit products, only one part was the HR holder coupled to the Brodit Pro-Clip, you can see the three pictures using the HR Holder around the text -
"The HR mount is supplied with a flexible arm and windscreen suction cup, I much prefer the Brodit Pro clip as it provides a more stable mounting solution that is vibration free."
or read my post at this link http://www.pocketgpsworld.com/modul...pic&t=48131&postdays=0&postorder=asc&start=51
Both Brodit and the HR units can be used with a winscreen holder or Pro clips, an edless choice of options depending on the vehicle and phone - Mike
thanks for the reply,
i am a bit confused as to how to select the car holder. i am a bit concerned as to if the car holder would fit the MDA copact III.
i checked in the t-mobile store and they are doing something for 10 pounds. the upside is if it does not fit, i can return it.
but then i be limited to a certain choice.
not sure if i should be going for something that attaches to the vents or something that sticks to the windscreen.
i came across this one
http://www.lhdigital.co.uk//product_info.php?cPath=6_127&products_id=126
is there much between two holders?
Its quite a simple choice to be honest, are you happy to entrust a cheap £10 holder from the shop that can mount a mutitude of devices or get a specific holder that has a degree of quality about it?
I have a T-Mobile generic holder and its CR*P - I certainly wouldn't use it to hold a device worth around £400 - your choice - the position is down to what suits you and the style of mount/ Pro clip available for your car - or go with the cheap offerings and take a chance - Mike
thanks for the reply mike,
i think i will go with a nice decent holder.
i looked ath the herbert rickter mount in the post, and the verdict is that it vibrates.
would it be correct to say that all windscreen mounts vibrate?
i have been using the regular tomtom on the windscreen. so i am used to that.
does a pda on the air vent enable easy viewing for navigation purposes (i guess one gets used to it)
are all the herbert richter's the screen mounts.
what is pro clip?
thanks for the reply mike,
i think i will go with a nice decent holder.
i looked ath the herbert rickter mount in the post, and the verdict is that it vibrates.
would it be correct to say that all windscreen mounts vibrate?
i have been using the regular tomtom on the windscreen. so i am used to that.
does a pda on the air vent enable easy viewing for navigation purposes (i guess one gets used to it)
are all the herbert richter's the screen mounts.
what is pro clip?
Well I trust my device to a £3.50 flexible windscreen mount from ebay, and it works perfectly!
I've tried vent mounts, but they are generally rubbish - but it could be my vents! I've tried magnetic ones but they don't stick to my dash - it could be my dash! So far, the windscreen one has been perfect! Although it did wiggle about a bit until I 'adjusted' it by getting it to rest against the instrument console. Not a judder out of it now! and I highly recommend it and the £36.50 saving
t mobil mda compact ııı wm6 rom
where t mobil mda compact ııı wm6 rom
thanks for the reply stunno,
what is the make of your windscreen mda holder?
It was this one
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160072850929&ssPageName=ADME:B:EOIBSA:UK:11
but I was mistaken about the price, sorry. It was 99p +£2.99 postage
EDIT: they are being sold by someone else now
http://cgi.ebay.co.uk/Air-Vent-Moun...ryZ10364QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and the postage is only £1.99
thanks for the reply,
i went to the site and though it says that 5 are available i cant seem to be able to buy it.
i think they are all sold out. if you come across any other holders do let me know.
Search ebay for
"Air Vent Mount Suction Car Holder"
there are quite a few
I personally use a Brodit mount attached to a Dashmout bracket.
The wives Vario also uses a brodit mount but attched using a Brodit Proclip, nice and easy to install.
See attched for my car. Need a new pic with the phone attched.
http://img248.imageshack.us/img248/5001/img3789kw3.jpg
Related
Is anyone else mad enough to own a Universal and a Fiat Multipla and has a car mount?
The Multi windscreen is quite steep and the the fascia 'shelf' is quite deep. I am concerned that some car mounts which stick on the window may not be deep enough - though maybe I could mount it higher up the windscreen.
If anyone has the time to measure length (from windscreen to rear of mounting bracket) for mounts they would recommend I would be most grateful.
Thanks
Clive
Clive, it is recommended that you rest Windshield mounts on the surface of the dashboard. This is due to the fact that your brick is > 220g dangling in the air... There are long and short mounts available and takes some patience trying to find the best location for it.
The shorter windshield mounts suffer less from suspension movements. I am using the JasJar on an Alfa 156.
i use a brodit active holder and the Richter set.
these combined i can click the holder to a air vent in the center of my dashbord.
no cables on the dashbord and in front of the heater, no winging device
its placed lower so i have a clear view through my window
added foto's of the holder
try www.pdashop.nl got to qtek 9000 autohouders
richter is the foto on the right and i use the top left device
Hi Guys,
Just to let you all know that Brodit have released the following HTC Artemis/MDA Compact III/HTCP3300 holders
To view images and specs etc follow the link:
http://www.dsldevelopments.com/brodit/New_Holder/HTC+Artemis-Brodit-Holder.asp
Thanks all, if you have any questions, please drop me a line,
Bryson
_________________
DSL Developments Please visit my website for all Brodit Device Holders & Proclips
Nice
I'm going to need one of these when my Artemis arrives within a couple of days. Not sure but i think that it comes with a holder for the car in the box. Anyway just wanted to say that you should stay away from the holders that attach to the heating vents of the car. My unlce who works for Cisco Systems told me that they have been flagged by his company because it apparently is not good for the device.Not sure if this is true but just wanted to give this community a heads up on this one. I say you go for the suction holders.
neptune said:
I'm going to need one of these when my Artemis arrives within a couple of days. Not sure but i think that it comes with a holder for the car in the box. Anyway just wanted to say that you should stay away from the holders that attach to the heating vents of the car. My unlce who works for Cisco Systems told me that they have been flagged by his company because it apparently is not good for the device.Not sure if this is true but just wanted to give this community a heads up on this one. I say you go for the suction holders.
Click to expand...
Click to collapse
The P3300 comes with a car holder, which looks very much like the brodit holders oddly enough...
Also comes with a windcreen suction mount and a natty HTC car charger (witch shiny chrome HTC embossed on it)
You only get the car charger, windscreen mount and 512MB Transflash card with the Premium version (this is the one with full TomTom mapping included) - well thats what the manual states, I got all three "extras" with mine - Mike
I didn't get any accessories with my device. I just got the base unit with the manuals, etc. I need a car mount.
neptune said:
I'm going to need one of these when my Artemis arrives within a couple of days. Not sure but i think that it comes with a holder for the car in the box. Anyway just wanted to say that you should stay away from the holders that attach to the heating vents of the car. My unlce who works for Cisco Systems told me that they have been flagged by his company because it apparently is not good for the device.Not sure if this is true but just wanted to give this community a heads up on this one. I say you go for the suction holders.
Click to expand...
Click to collapse
Hey Neptune,
I see what you are saying, but thousands upon thousands of very satisfied customers and no damaged devices, along with rigourous controlled tests really do mean you are worrying about this without a valid cause!
Thanks
Bryson
anyone know of any other holder/charger units for the artemis? £40 quid is kinda expensive!
It Sucka
ansaar99 said:
anyone know of any other holder/charger units for the artemis? £40 quid is kinda expensive!
Click to expand...
Click to collapse
This device sucks its build cheap ass so it wont fit smoothly it has broken my mini usbport on the p3300. Need to get it fixed hope it will fall under my guarantee. Find another carholder/charger this one sucks!
Perjan, thanks for the heads up. For £40 i would be expecting top build quality.
Brodit holder for UK O2 XDA Orbit
The Orbit is basically an Artemis with a redesigned shell....
Does anyone know if the Orbit will fit into an Artemis / Brodit holder?
Cheers
Chris
hi
the orbit usb port is located slightly differently to the P3300 i believe it is only millimeters out but could make a difernence. I heard Brodit were making a holder specific to the Orbit for that reason.
Re comments above about vent holders i used one for 2 years with a IPAQ 5550 and had no issues at all.(infact in the summer it was a bonus as the ai con helped keep the device cool)
I find they are not so suitable for the Orbit as the clip/holder that is stuck to the device is not Orbit friendly.and if i use the clip that came with the Pdair case it hangs forward.
i use a suction mount with the side grip bars and it works great with the PDair case.
Well I have the brodit mount for the Artemis and it works well with the Orbit. It arrived after I read this post and I was aware it might not fit exactly so I gently bent the connector on the mount and it now fits perfectly and I am more than happy with it.
I am now just awaiting the brodit pro clip to attach it to the dashboard over the air vent. As I do not want to leave the screen mounted holder in the car due to last attempted break in!
Just to confirm only gentle pressure is needed to align the connection to fit perfectly to the Orbit so well worth the money in my opinion.
Hi guys
Does anyone have a suggestion for a vent windscreen car mount for the prophet?
I have been looking for one for a long time, the universal ones I found they all suck. I had a Mio PDA Phone and the mount was really good.
Anyway, thanks.
I had a friend who bought one of those universal car mounts on the local Club Nokia for it's magician which is the same size and shape of our prophets and it worked like a charm, think it cost 20€ and he bought it last year...
Try www.cellularline.com. Italian company. They make a product called Crabbox. I bought one new for €12, and it works just fine. It's also pretty chic and compact, and you can mount it on either vents or direct to dashboard.
Hi,
Ordered my Orbit, and looking forward to it - may have finally got an XDA that I'll keep long term. Have had II, IIi, S, mini, Exec, so it would be nice if so!
My first post for a while - as usually the info I want I can find in a search. Except this one!
I'd really like a case for the Orbit - either a skin-type, or the alum' one. However I also need a car holder for it, with tough UK no-mobile-phones in cars rules insisting on this. Ideally one with a power speaker & mic, like the up-coming Seidio.
The question - does anyone know of a case/car holder combo that works together without having to remove the PDA from the case? I know you can get the cases with a magnetic back and corresponding holder, however would rather avoid this approach if possible.
Oh - and just to clarify, the case needs to still be pocket sized, so the usual large clip things sticking out the back will be no good. Maybe someone has "invented" their own solution? I figure the alum' one is modifiable, so am thinking that may be the best bet - just need some ideas for mounting! (esp' bearing in mind would like a active powered holder).
Thanks all!
I think you will struggle to find an active mount with speaker due to the audio output being part of the mini USB connector on these devices.
Take a look at Brodit 848714 for a passive holder or Brodit 968714 for an active version (charging only). These are just the holders, you will need a Pro-Clip to suit your vehicle, I also recommend a "Move it" clip between the Pro-Clip and the holder, it makes removal quick and efficiant, leaving just the small pro-clip in the vehicle (less chance of some low-life breaking in because a mount is on show). - These are quality holders, not the cheapest, but then do you want your new toy flying around the car due to a crappy mount?
For the audio output you could use Bluetooth - I have had my Artemis connected via BT and playing through the car stereo, a little low in volume but the quality was very good - Mike
Cheers Mike,
I've already got the brodit system - used it with both the IIi and S, so have the bracket etc. The brodit holders will not allow for any type of case (skin, alum, etc) - and I cannot see how to modify them to suit. The brodit bracket itself is just a platform, so have used with many other holders.
The Seidio case I refered to is (yet to be released):
http://www.handnav-hosting.co.uk/product_details.php?id=2373
I guess what I'm hoping for is a brand that makes a case, plus a compatible car holder that supplies at least power.
Worse case I'll most likely get alum pdair case, stick a magnet to the back, and just plug in a charge cable each time (and use bluetooth car-kit).
Thanks,
My solution
I have a siemens hcw600 bluetooth car kit - works superbly if you install jetware and the address book swap. DId this on my Mini S and now on my new Orbit...
I also got a standatd multi-way pda adapter off eby... if you get one with adjustable feet on the bottom, put the Orbit in, connect the usb, then slide the feet tight up to the usb... then add a few strategic drops of superglue to the feet and usb, and you have a fixed connector... this also works if the unit is i a case - just make sure its in the case and positioned before you clue the usb to the holder....
Great sounding tip - may give that a go! I did notice that the Orbit is now thin (width) enough to fit lots of mobile phone holders on their widest setting.
Going to review one of these new PDAHut mounts in the mean time.... Will let you know what it's like.
http://www.pocketgpsworld.com/modules.php?name=News&file=article&sid=910
I have had this holder for nearly two months now for my Orbit.
It is the best holder I have ever bought.
I have the Brodit with a Herbert Richter Vent Attachment.
The Brodit clips are definitely the best on the market - but clearly not the cheapest.
Just fitted mine to my Audi A4 for my orbit however regretting buying the proclip which attaches to the dash on the left side of the radio - it's too far to have to turn your head when using sat nav - am likely now to have to buy the centre vent proclip.
I have used this mount for the past 6 months (Active mount). I have the original one for the artemis and it works perfectly well with my XDA Orbit.
All the issues others have had with the fitting in the mount were not an issue. I only had to bend the mini usb connection back slightly so the device would fit perfectly.
I have had no problems of any marking my Orbit and couldn't be any happier
I also have one of these which I use with my XDA orbit in my Mazda RX8. By far the best car mouting/charging solution I have ever used - highly recommended.
A number of months after writing some of the article linked to I am more than happy with the holder, mine is the passive type which entails using a charger cable but it is easy to connect and holds the device nice and secure in the Ovlov (where some of the pictures were taken) - Mike