I have tried to flash WM6 ROMs (both english versions available at wiki - pdaviet and orbit) to HTC original Artemis and every flash ends with error msg "The file \windows\cusTSK.exe does not exist", which is displayed after soft reset when it tries to install extrom.
Does anybody know where is the problem ? I have tried this flash several times, but always with this error ...
It sounds like you may have a corrupt extended Rom. I'd try flashing your original carrier ROM to fix it.
The error message is normal.
When I got the error the first time I boot the device (pdamobiz rom) I waited for 5 mins to see what happens. Then I simply made a power-off-power on to the mobile phone and the error never reappeared ever since. It works perfectly now!
I am not sure, but I guess this err msg is displayed when it tries to install apps from extrom, it is displayed after each hard reset. This is no limitation in functionality, everything works fine, only limitation is that there are no extrom apps installed, but these can be installed manually
I think the problem is that the program that changes the background in WM6 is not cusTSK.exe anymore. I don't know what is the program to do that in WM6 but maybe someone here knows. The error happens because on you extended rom there is a reference to cusTSK.exe. We need to know what is the name of the new program and then update our extended rom.
Sounds logically ...
Related
Good evening, kind forum readers.
Per the subject line, I find myself in possession of one misbehaving iMate-branded Blue Angel. Everything was working perfectly until a day and a half ago. Now the device is acting as though there is no SIM card inserted whatsoever.
As you might expect, there is no signal detected whatsoever. The 'Device Information' system applicaton reports no information for the Radio or Protocol version. There is no IMEI number listed on the Identity tab. Launching the 'SIM Manager' tool does nothing - the application never launches. When I do a soft reboot, it correctly lists the ROM verion on the startup screen, but says directly above it "No GSM". I've tried a hard boot and restore from a backup from about a week ago, no luck. I have tried with two SIM cards from two different providers, neither one produces any different results. Both cards work perfectly when inserted into another phone.
I am using the official 1.40.00 WWE ROM from iMate. When I try to reapply the ROM, I receive the "COUNTRY ID ERROR". I tried with an older third-party ROM that I had been using a while back, but that also aborts with the same error message.
Speaking with iMate support netted me the typical "Send it in to a service center" answer.
Hoping that someone else out there might have gone through something similar? Any thoughts/suggestions on how I might recover from this?
Regards,
Shawn.
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Try following the description on the link, go for the MaUpgradeUt_noID option.
Use this on your Original Rom, and try one upgrade at a time, Radio first, then OS, Don't see any reason to flash the Extended Rom
bosjo said:
Try following the description on the link, go for the MaUpgradeUt_noID option.
Use this on your Original Rom, and try one upgrade at a time, Radio first, then OS, Don't see any reason to flash the Extended Rom
Click to expand...
Click to collapse
I just tried this option, and it did progress further this time, but it produced the following error:
Device Software Update Utility - R2500 D1001 - CB2.07 -1
ERROR 114: RADIO ROM UPDATE ERROR
There has been a problem while updating your device software.
To continue the update, please:
1 Disconnect your device and the USB cradle.
2 Perfrom a normal reset by pressing the reset button (as left picture show).
3 Reconnect your device and the USB cradle and run this device software update program again.
Click Exit to quit.
Click to expand...
Click to collapse
Being something of a newbie in such matters, I didn't realize that I had to run GetDeviceData.exe first, so I didn't have a copy of DeviceData.txt. In that the device was not in a bootable state, I wasn't sure how to run the OS upgrade without the Radio upgrade. I ended up going with the decidedly unscientific but seemingly effective solution of just renaming the 'radio_.nbf' file. The OS and extended ROM both upgraded successfully. So now I'm back where I started - the radio is still not functioning.
Run the same upgrade this time with the radio.nbf and remove the other 2 nbfs.
Else ron the radio upgrade only of wiki using those files.
And if what MDAIIIuser says don't work.
Download the latest Rom upgrade from your wendor website,
extract the .exe file with a zip program,
delete the nk, ms, radio files,
Copy the 1.13 radio in there,
Run the BaUpgradeUt.exe
Or try to only delete the ms and nk files leaving what ever radio is in there, and run the BaUpgradeUt.exe
I have problem with upgrading my PDA:
- USPL dont works for me: after switching to white screen (bootloader) RUU ends with "connection problem" error
- when I keep this (whitescreen) bootloader, then sometimes (i.e. after 10 unsuccesful tries) some RUUs see my phone and try to flash it (only succesfull are B&B v3 and DOPOD 3.7)
- I have no success with flashing from standard bootloader or running system
Does anybody have any ideas where can be a problem?
get the origanl rom for it it always work never any problems
yeah, I'm sure it works, but I'm trying to put a WM6 inside ;-)
Is it the same after hard reset?
Its the same all the time. The only way is:
1) upload original rom
2) run uspl
3) when white screen displays upload DOPODASIA_WWE_3.7.707.1_4.1.13.30_02.69.90
4) load Windows.nb from pdaviet b&b v3 (pdaviet 3.7 and touchflo don't work - only white screen after reboot is displayed)
...when some errors happens, I must begin from point 1) :-/
UPDATE: TOM_Artemis_Black&Blue_v3.7 works!
...I'm almost at the end of my way ;-)
btw: Is there any way to install InterWrite (czech localisation) ? (standart installation ends with restart during install process)
i hope it is ok to post for help with the axim, i noticed others have so i figured i would, since i am getting desperate.
ok obviously i am a newb at this or i probably would not have this problem so please bear with me.
i downloaded the Dell_Axim_X50_X50v_wm2005_A01 99mb file and then went threw the install process. the first problem was that since i am using vista it does not seem to work with windows mobile center v6... when it tries to install i get bast the "update rom" and the warning to backup, then it verifies the device and cautions about clearing all the data, then when i click continue it freezes and my axim says "wait for usb to be ready...", then a few seconds later the installer says "ROMUpdateUTILITY MFC application has stopped working" and i have to close the program. I then have to hard reset my axim.
i then tried to flash the rom by putting the files on the sd card like it says in this forum but when i do that i get to the "SD Image A01 update" and then it says "no suitable image found" and then "image update failed, please try again"
I have tried it with both the following images that were in the zip cause i was not sure which one was the correct one.... niether one works.
AximX50_A_WM5_A01EN
AximX50_B_WM5_A01EN
is this a vista compatability issue? a mobile center v6.1 issue? or is it my stupidy?
any advice.
all i want to do is update from wm2003se to wm 5
ok must have been vista cause i went to a friends house and upgraded fine on xp
wm5 update roms
Where do I find such rom updates? apparently Dell disavows their existence.
and how can i tell which romset to use.. low or high..?
b
can someone who has this file Dell_Axim_X50_X50v_wm2005_A01.rar upload it somewhere else please???
Hi
I have a HTC Cruise(Polaris), I tried a view roms from the Polaris section, but I prefered goig back to my old rom. So when I tried to flash the Dutch Dumped Rom I got stuck at 15% I rebooted the pda. So now all I see are tree colors.
When I try to upgrade the phone to the WWE release version I get: "error 294 invalid vender ID". After it hits 1%.
- How can I CID unlock this phone?
- Joe
With Polaris_WWE_B_20273_1_3_3_V09_Lt_Swtos I get a ERROR [262] : UPDATE ERROR. Even when I retry. Also with the RUU_Polaris_HTC_NLD_SEA_1.28.404.2_radio_sign_25.69.30.05H_1.58.25.14_Ship
anyone can help me out?
Extract the RUU_Signed.nbh file from the downloaded ROM and try flashing from a microSD card. Directions can be found on the boards.
Extract the RUU_Signed.nbh file from the downloaded ROM and try flashing from a microSD card. Directions can be found on the boards.
Click to expand...
Click to collapse
i renamed the RUU_Signed.nbh and pushed down the camera button and rebooted, but doesn't work. Could you shed some light on this?
I have a completely different suggestion. Have you tried a hard reset BEFORE you attempt the burn?
I do not know or have experience of your hardware. I have burned new ROMs on two other makes of PDA and experienced the same problem. A hard reset or return to factory state works.
I have concluded that a burn often fails because the new image does not have enough memory space on the PDA to load the new ROM image and the small program that executes the burn. If you don't go back to the "factory state" by removing all your own installed programs and data first, then there may be insufficient memory to complete the burn. Precisely where it fails in the burn depends upon how much spare memory is available, so in other cases it will fail at a different percentage of the burn.
Worth a try?
solved it with mtty
A new hotfix appeared on htc website for the Touch pro 2, saying:
"Hotfix to enhance the internal GPS capability in the HTC Touch Pro2"
http://www.htc.com/www/supportdownloadlist.aspx?p_id=250&act=sd&cat=all
Does anyone know anything about this? Because I don't have any problems with my present gps capability. Igo, google maps, tracky all working fine. Finding lots of satellites very quickly. So I really don't know why did they release this hotfix. (Though I've never tried tomtom).
This hotfix only can be applied for ROM version lower then 1.21.000.0.
sbraga said:
This hotfix only can be applied for ROM version lower then 1.21.000.0.
Click to expand...
Click to collapse
I have ROM version 1.19.401.0 which is lower than 1.21.000.0
So?
the hotfix is simply a new radio....
it's not only for gps as htc says...
anyway, i feel good with my current radio, in terms of battery longevity and signal strenght, both gsm/umts and gps
so i think i'll not upgrade for now....
invalid vendor id ? grr dont work orange uk rom 1.19.61.3 (51489) wwe 26/05/09 radio 3.45.25.14 opperator v 94.119.1.613 protocol 61.27t.25.23u
any ideas or call in at htc ?
doesn't work with vodafone either....phoneing to complain.
You pay for a phone and you can't do nothing with it....pleaseeeee !!!!
Lets see what they say...
All i wish for this christmas is a HardSPL for my TP2...
Hi All,
Do I have reinstall my phone again after updating a radio ? the update readme tells me to backup and restore peronal stuff.
Perhaps this is a general warning .... but i like to know for sure if everything on my phone could be lost like a hard reset,
regards
Keep an eye out on your manufacturers website in regards to this NEW hotFix.
Vodafone and Orange will release one soon.
Just confirmed over the phone ...lets see if it happens SOON>>>
Doesn't work with unbranded UK phone either, ROM 1.19.401.0 (51489)WWE, (Invalid Vendor ID error message) In addition the installation instructions on the site are just plain wrong.
4. Copy the hotfix, which is an .exe file, to your device. To install the hotfix, tap the .exe file and follow the on-screen instructions.
Note: If you perform a device hard reset, you will need to reinstall the hotfix after the hard reset.
Click to expand...
Click to collapse
It needs to be run from your PC not the device, and I assume as it is flashing the radio a hard reset won't remove it.
the same on me,
i dont have any probs with iGO & GPS
okay, okay...
sometimes it will have max. a minute for SatFixes...
never change a Good Tweakd Running System
greetz
dgh said:
Hi All,
Do I have reinstall my phone again after updating a radio ? the update readme tells me to backup and restore peronal stuff.
Perhaps this is a general warning .... but i like to know for sure if everything on my phone could be lost like a hard reset,
regards
Click to expand...
Click to collapse
The install will return your PDA back to factory settings, like a hard reset
so this wont work hua?
I also have ROM 1.19.401.0 (51489)WWE
Not working om my stock dutch rom. (Non branded)
Invalid vendor ID
I extracted the .exe file and found a ReadMe file inside which says following:
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Since I'm getting ERROR 294 all the time I presume something is not ok with the RUU tool?
Maybe someone can check into this?
Invalid vendor ID also on my stock, unbranded WWE TP2 (Finnish).
MusicArt1st said:
The install will return your PDA back to factory settings, like a hard reset
Click to expand...
Click to collapse
DARN ..... i just had it like i wanted it to be
Didnt work on french rom ...
Invalid ID ...
don't work on unbranded tp2 in Indonesia.
Invalid vendor ID.
Invalid Vendor ID with my Singapore stock ROM too
Has anyone tried the CustomRUU with this?