Like Below; Push mail + Phone CALLS problem - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi,
like the thread below I have problems with my GPRS connection freezing. I'm pretty sure what's happening is that when the phone goes out of signal range (Unfortunately this includes several of my uni buildings) and then BACK INTO SIGNAL, the phone won't make a call and the push mail dies the death.
Interestingly, SMS continue as normal - so I have no idea it's happened until I try to make a call or check activesync on the device!
I've tried 3 or 4 different radio roms, all seem to have the same problem.
Device information shows:
ROM version: 2.50.00 WWE
Radio: 1.12.00
Protocol version:42.46.P8.
I've added my own ExtROM with my used programs in there. I believe I've tried radio ROMs 12, 14 and 15. I'm running out of ideas and sanity. Any prods in the right direction would be gratefully received!

I'm probably not the person to be giving advice, considering it was me asking for help in the other thread!
http://forum.xda-developers.com/showthread.php?t=309365
Have you tried the suggestion from the other thread to try going to a page with Pocket IE to see if the entire GPRS connection has frozen?
Also have you tried other main ROMs?
My phone very rarely goes out of reception, but I'll try and pay attention to what it does next time.

Related

Xda_IIs_v131139_upgrade.exe Update

Hi guys,
Recently installed the latest ROM offered by O2 onto my XDA2s, having firstly been incredibly frustrated that I'd lost all my txt messages and installed applications, I have since found that the phone locks up almost daily now - it particularly seems to be whenever switching the phone on/off with the topright power button - at which stage it'll just freeze.
Sometimes when making a call, I'll dial the number, and when ringing starts, switch the phone display off so as to save batteries, when doing the same since the ROM update, the phone seems to hang.
VERY frustrated, anyone any ideas, or experiencing the same?
Another question, with Bluetooth Audio, is there any way to stream a telephone call through my PC via a bluetooth link allowing me to chat/hear through the PC instead of the phone?
And finally, does anyone else find the Network Connections settings on the PocketPC OS incredibly stupid, confusing and impossible to accurately setup for Internet access through Wireless/Bluetooth??
Cheers, Ash
this may help
http://forum.xda-developers.com/viewtopic.php?t=18350
follow the above thread. I found by doing what it said about removing o2 active stuff I havent had to soft reset since..
I would also add that I have also upgraded to radio rom 1.12.00 and Blue tooth 3900 (shortly after so not certain it was due just to that but likely)
If I can be any help at all PM me and I will try and assist maybe talk on instant messenger..
But I must repeat it hasnt locked since the above and the battery life seems much much greater.... for instance I left it on from 6pm last night until 7am this morning and it appeared to loose only 10% battery including making a couple of calls..
I would do it again with and uk xda2s
Hope that helps
as for the rest of your questions no idea LOL
Stay happy
Thanks for your reply, I did install the upgrade in Corporate mode having read that thread first, but its still installed all the O2 Active stuff - so should I now remove the bits from my Startup folder that relate to O2?
Also, I now cannot find any easy way to disconnect GPRS once its connected????
yep
I would get rid of the active bits as said.. to disconnect gprs simply press and hold the red hang up button
I will look again at your posts and answer anything else I can.. dont know if you have noticed but this site is slow so sorry for the delay in replying
have you upgraded the radio rom and BT version?????
stay happy
did you enter a corporate code when setting up in corporate mode?
0506 i belive
stay happy
Ahhhhh, I thought Corporate Code was for the screen password lock or something, so I just entered my usual code - should I rewrite the rom upgrade again, or can I run the setup program separately on the XDA to enter the 0506 code??
I'm currently running...
Rom V: 1.31.00 WWE
Rom Date: 12/13/04
Radio V: 1.06.00
Protocol: 1337.38
ExtRomV: 1.31.139 WWE
Is that the latest? got from the official O2 website.
Thanks also for the GPRS disconnect, that helps, shame it doesn't tell you, hehe!
you should just be able to do a hard reset and put it into corporate mode. do a backup first though..
The versions you are running are the latest from O2 I think.... however you can find the ones I am using on this forum... I have found them much better and if you are going to do a hard reset you might want to do them first....
anything else just shout..
stay happy
Yeah but if you back up then you are backing up the O2 active stuff as well. When you do a hard reset and choose corporate ok. But when you use backup restore the O2 active gets restored. I use Sprite as backup and i can't see offhand how to backup everything EXCEPT the O2 active stuff so that it won't reinstall on a restore. I've manually put back all my progs etc and then backed up so O2 Active won't come back.
I have to say that the latest O2 Rom update using the personal rather than corporate mode is a disaster. My phone was locking up every day. I was getting really p***** off with it. Now I have got shot of the O2 active stuff everything works fine.
Hi
Here are the instructions I got form Brian at O2 data Support. Back up to PC rather than storage card and restore from there. Here goes:
Workaround - setup a 'Corporate' install that doesn't include the Active
User Interface
Before starting insure important data is saved by syncing to Outlook on your
PC if needed (do not use backup/restore)
* Hard reset.
* Near the end of the custom applications auto-install you will be
given a choice of "Corporate" or "Personal". You should choose "Corporate".
Note: you will only have approx 5 seconds to choose this option, after which
the 'Personal' option will be automatically selected
* You will be asked for a pin. Enter 0506 (that's zero five zero
six) and tap Finish
* You will see the message "Welcome corporate user, O2 Active won't
be installed". Your device is now ready and you will have everything except
the Active User Interface.
Important: the mobile web, WAP and mms settings WILL still be preset.
Hope this helps
Regards
Chris

Difficulties with phone after upgrading to the new ROM

Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Me Too
I Have the same problem :-(
Me Too
I Have the same problem :-(
Ive noticed in your screen shot the active sync is trying to connect with the internet which will prevent you phone from making the call. To give a example .... if I was downloading a file using my universal and someone tried to call me they would get my mail instead of ringing as the phone is using the internet connection however as soon as the file downloaded the phone would break the internet connection and allow the call. Hope that made sense!
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
numanoids said:
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
Click to expand...
Click to collapse
That's what I always thought but even with my trusty old imate jam I found if I got a call as I was downloading say mail the call would not make it though, try downloading a biggish file then ring your phone number at the same time I bet it will not make it This as ALWAYS been the case btw - don't matter which rom you have. oh and this applies to gsm (2.5 gprs) only as 3G is a totally different ball game!
thx for all inputs but it happens even without activesync running ... it doesn't work again except by switching the phone off then on ... the most exciting part: u will never notice that your phone is frozen till you try to make a call :evil: ... this will make me to go back to the old rom
More observation on this issue ... I made a hard reset and started without any problems with the phone part ... I restored a system backup and all went well ... the phone issue appeared again when I paired my BT headset with the device ... this might mean something to do with the BT stack ... I believe it happens mostly during or after using the headset :?:
Any similar experiences ?
Biso007 said:
Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Click to expand...
Click to collapse
Same Problem Here... I was going to downgrade to 1.08.00, but now I may not... Don't want to lose the speed increase, so don't want to downgrade ROM...
back again ...
I made another hard reset and staretd without any s/w installed for a week .. the phone seemed to be stable but with the same annoying BT disconnect issue ... the above issue started to appear again after installing some phone related s/w like Smart Filter and PZP ... I think the new Radio ROMs starting with 1.08 have an issue with such applications that would continously check on phone traffic or have OS hooks to catch some events ... this wasn't the case with Radio 1.02 or 1.03 ... I 'm thinking to get back to 1.03 since I got nothing from 1.08 or 1.09 except quick battery draining!!

'Radio' Lockup Issue - My take (And some good news..)

A few people have been having the same issue as me with more recent AKU3.* ROMs, wherein the radio features (GSM/UMTS,GPRS etc) - cease to function. Symptoms include the connectivity icons becoming non-responsive to stylus-press, and phone calls starting, but no call being made (silence) - and calls refusing to end.
This has been driving me nuts, and just when I think a new ROM (CE or Radio) has solved it, it re-appears. I have been playing around with everything I can to either diagnose, or solve this problem, and this is what I have found:
The phone only locks up, when handover between GSM and UMTS has occurred several times. I use the Hutchison 3 network in .au, and the coverage in Sydney is a bit spotty - hence the frequent handover to 'Roaming', and back again. Now that I have disabled the GSM functionality (i.e. just use UMTS, in the 'band' menu in 'Phone' settings) - I haven't had a single phone lockup.
To the other people having this issue: does this pattern of use sound familiar? I.e. is your main carrier UMTS, roaming to GSM? I'd like some feedback to see if we can isolate this, or if this solution works for other people
Hey
Had this problem many times with all kind of roms.
Usually the icons would react to clicks, but internet wouldn't work and also calling.
When I would turn on flight mode, the right icon (your reception) would change and gets a little cross (telling its disabled). But the left one would still be stuck on G/U as connected. It would take a min or 2 before it finally updates to a little cross saying its disabled. Then I can disable flight mode again and the phone would work (most of the time)
I live around 70 km from my work and I drive back and fort every day. In the car my universal is in the charger and I have always live messenger connected and AS for email.
during this trip my reception is lost twice, besides that it switches a couple of times from Umts to Gprs.
I've updated my phone to 1.14 radio en helmi 3.5 aku rom. And have experienced a couple of times what you discribed. The 3G and G/U icons wouldn't react to the stylus and the phone seems to be stuck. The device itself still works. But I have to soft reset to get it going again.
So after reading your story I can say this scenario refers to my experience.
I'm gonna try your solution from off today and let you know
I have only GPRS here and this problem happens to me with all AKU3.x versions even with different radios (1.09 -> 1.14.10) ... I still believe it has nothing to do with ONLY hand-over ... I reverted back to AKU2 and it never happened since then
Same here....
I have similar experiences with UMTS and GSM handover issues. I observed that sticking to one band (in my case GSM since it is more prevalent than the other in countries I go to!) is the way to go. When in M1, I got dropped problematic calls and my SMS were delayed but when I stuck to GSM only then everything was back to normal. I have been trying out the new Radio Rom 1.14.10 with Helmi AKU3.5 for 3 days now and am not having handover issues! Could be the Radio Rom or the Rom itself but if it acts up again then I know what to do then! Hope this helps!!!
The problem is in rilgsm.dll file.
I can tell that it is solved in crossbow.
mamaich said:
The problem is in rilgsm.dll file.
I can tell that it is solved in crossbow.
Click to expand...
Click to collapse
would replacing the file in the current aku3 roms with an older one fix it?
i myself dont have the problem but allot of 3.2 wizard testers do.
Good to know, that I'm not the only one with this problem. I have seen this behaviour in all ROMs, not just the AKU3 and can confirm that it iseems to be related to the switchover between UMTS and GSM.
It also only seems to happen only when you have the internet connection open, which will always be the case when you use push-mail.
I had similar problems with the MDA III, whish I used before. Maybe it will get fixed in Crossbow - but by then we'll likely all have new phones.
^^
My internet connection is also always active. I have now switched from AUTO network to WCDMA (umts).
Going to see if this helps. After that I'll try the GSM band to see if it makes a difference
But it's something my device always had problems with, so I guess it's ROM independent
I'd like to see if that rilgsm.dll can be re-used. Unfortunately, the coverage of UMTS in the area where I live is far too spotty to be comfortable with pinning the radio band to UMTS.
However, I'm interested in your thoughts.
I must say that I agree with biso007. This problem started to occur when I upgraded to AKU3 roms. Before, I was on AKU2 with the exact same radio rom (I didn't flash it!) and never had any issue. Combined with mamaichs comment that it is related to a DLL file, I would say that the problem is indeed not related to a radio-ROM but to the AKU ROM.
Just my 2 cents....
I had same problems with Radio lockups on my UNIVERSAL. I've tried different ROMs with no luck. BUT after changing my Radio rom back to latest from T-mobile (1.10.03) everything back to normal- all day driving with GPRS on - no lockups at all!!! 100% solution is..... use old radio rom.
Would not mind downgrading...
I have lockup issues as well... if this really helps, I will downgrade the Radio ROM without hesitation. Where can I find thsi Radio ROM; is it on the xda-dev FTP site?
Thanks,
-Ireneus
Hi All!
Yes, this issue is the most annoying among all other issues, and it makes UNI impossible to use as the phone for business communications.
I confirm that lockup issue existed on EACH radio version I used and on EVERY ROM version.
I don't think this issue is caused by the GSM Band switch or Internet connection active or anything else specific, because this lockup happend even on networks with no 3G at all and no internet connection active and also BT and WiFi off.
It happens when I start intensivelly use my UNI for calls, sms, open contacts, view appointments (note: No 3-d party software at all).
I also mentioned that the issue happens more often with the battery level below 50% or so and almost rarelly happen on external power.
Another "good news" here is that if you receive an SMS during that intensive operations, you will permanently lose it after the phone lock up.
Thank you,
Dmitry.
I wonder is this is just a Universal issue? Or do other devices have the same issues; I mean as frequently as on the UNI.
If it is just the UNI than indeed it is useless as a phone and nothing more than a beeping, brick with a nice VGA screen. I basically fidn it hard to believe that this is the case and I would like to know if there is anyone out there, who does not have lock-up issues with the UNI and I would also like to know from the people who are testing Crossbow if the lock-ups still happen?
All input appreciated.
-Ireneus

The phone is not ready wait 15 seconds and try again

i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
I am getting the same problem why is this?
I have a o2 xda IIs, i have installed WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) Updated [30.11.2007]
i face the same problem, furthermore i realize when the battery is near 30% da phone becomes buggy in the sense dat messages stop getting sent and after soft resets da trouble is the network stops getting detected only after 5 minutes i see network signals,as soon as i hookup the phone with power the sms problem is immediately solved!
It may be helpful to note i have not installed any third party software and the phone has been hard reset only a few days ago!
Does the parite virus affect the phone? i installed parite infected .exe software through AS 4.5 and as a precaution hard resetted the phone following that!!
furthermore tapping answer doesnt work and the call automatically gets disconnected!!!
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
basharatwant said:
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
Click to expand...
Click to collapse
NO dont do that. it will drain your battery faster if bluetooth is on.
make sure it is OFF and also check the infrared (Beam).
You're battery might be failing to power up the phone module.
Try a new battery.
I've experienced some used battery.
Below 30% is very critical for ALL PocketPC operations, this is the point where some glitch tends to pop-up because the battery cant support
the power requirement of the hardware in which the software was using
(Ex. Phone, Camera, LCD, Speaker, Mic, Digitizer) thus, it fails bigtime or sometimes crashes.
Except if your battery is newer where the 30% which steadily and accurately give power to our BA.
And make sure you terminate all your programs if you've finished using it, if it is running it might affect the power consumption because it is still present in the memory.
anyone can sync without using original cradle or bluetooth? i m having problems with non-ori cables..on usb port.. help pls!!!
plusdesign_np said:
i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
Click to expand...
Click to collapse
Does this happens right after powering on ?
It is normal to take a long time to boot up the SIM Cards configuration and specially SIM contacts onto the phone's memory.
JP
OMG i realize after 35% my phone starts getting buggy, messages dont get sent :s phone hangs and has to be reset :O...can anyone tell me if a new battery for a blue angel is a good idea? and furthermore I am willing to invest in a new battery can anyone send me links for a cheap O2 XDA IIS battery which will last rigorous use? can anyone verify stability issues after 30%?
The phone is not ready. Wait 15 secondsd and try again. !!!
And can't open Options for the phone and not able to send SMS.
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Trying reflashing and also with another PV WM6 2000 and trying to send SMS immidiately after reflashing but no luck! Though it worked in the first days of switching to WM6.
Could it be the Radio 1.12 version problem?
Thanks for helping!
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
basharatwant said:
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
Click to expand...
Click to collapse
I can receive SMS but not send them out!
And the phone is working though the Phone Options says the same thing about waitinf for 15 seconds and cannot be opened at all!
Thanks for your kind reply.
surely the battery keep it powered by da charger and den try
or try a new battery like i said in the 5th post of this thread.
SilverSamurai said:
or try a new battery like i said in the 5th post of this thread.
Click to expand...
Click to collapse
I did charge the battery and while in the cradle the phone Options and sending out SMS says the same thing about waiting for 15 seconds.
But the phone itself works with incoming and outgoing calls and I can receive the SMS !!!
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Could it be the Radio 1.12 version problem?
Thanks for helping!
try to upgrade your radio. i have 1.15. then let us see what happens.
SilverSamurai said:
try to upgrade your radio. i have 1.15. then let us see what happens.
Click to expand...
Click to collapse
Which upgrading method of the 2 that are described in the XDA Wiki?
Last time I tried both it seems it didn't work for me.
One says that is just Radio updating and the other the whole WM operating system?
Kind Regards
www.myspace.cn/taijiyoga
Just try the radio updating only. The one in the wiki is good.
or copy the radio.nbf to where nk.nbf is. then flash both only if you want.
if you just want the radio. delete the nk.nbf.
then launch MAUpgradeUT_NoID.exe
I had a very same problem.
The problem was solved by buying a new battery.
At least for me, the only problem was the battery. Now everything is going fine...
Yup. Mostly, but not all, problems are battery related. our BA's really a powermonger when it comes to eating battery mAh
so the most common advice for a hardware failure or such is a change of battery.
note: even our desktop PC's malfunction if it is running undervolt.

8525 freezes, soft reset, then "No GSM"

Recurring 8525 problem since upgrading to WM6 ROM (AT&T version). The phone will freeze completely (clock doesn't advance, screen and buttons and keyboard don't accept input, display freezes at on or off). When restarted by soft reset, the phone will frequently come back up with no GSM. When that happens, sometimes if I remove the battery and leave the phone off for a few hours then GSM will come back and will work for a while and then lock up again.
When it comes back with GSM service all of the network logon info for GPRS, my Wi-Fi networks with their auth info is gone.
Also email accounts are gone from the account picker and can't be re-created with the same names even though they have completely disappeared. I assume the settings are still in the registry but accounts just aren't showing. One account still shows on the Today screen, but isn't in the account picker.
A hard reset "fixes" things for a while. I've experimented with only installing a few of the most necessary 3rd party apps, without finding any "smoking gun" program that's causing problems. I've also re-seated the SIM card multiple times. I'm thinking it might be a hardware problem.
Today I flashed the radio to 1.54 and it has worked for a couple of hours without needing to be reset.
I'd be interested to hear what possible diagnostic paths I should look at before I call AT&T and begin the rigmarole required by tech support. Anyone with a very similar situation?
Thanks in advance.
I'm having the same problem. I was thinking of going to AT&T to get a new SIM, thinking that was the problem. Any solution yet?
-Pete
I started having the same problem with mine last week.
Sometimes it locks up, sometimes it gets stuck at the windows logo durring boot, always displays no gsm rom on boot.
Take a look at the how to unbrick thread. no gsm rom msg is one of the types of brick.
I installed hard spl ( already had it actually ). Flashed os, but it didn't help. Flashed GSM and no gsm msg went away. The phone is still acting strangely.
remember, just because the rom came from your carrier DOESNT mean that it doesnt have problems. Alot of people seem to have problems with upgraded rom versions from their carrier and end up either downgrading to previous rom or flashing cooked roms. try the previous rom or another cooked rom and see if that fixes the problem before blaming the hardware. It will save you a major headache trying to troubleshoot something that is working perfectly....
Please remember to do a bit of reading and hard spl your device before going off and bricking your Hermes. 10 minutes of reading might prevent hours, days or weeks of hair pulling, nail biting insanity to find the answer. Cheers.
hello people,
I have my SVP M3100, original from orange spain - but CID unlock to work with portuguese carrier, now I live and work in Hereford UK, and I use a sim from Three and other from Lebara the three sim is to have net on my pc and the lebara sim is to make low cost international call, and i switch many times the sim's to make calls and to have internet, now i have the same problem that you have, i try to upload the HTC original rom that have IPL. BOOTLOADER, SPLASH SCREENS EXTROM GSM, but lock at 12% I try upload ongly radio rom and the same a think that somekind of hardware problem caused by to many sims switch, if any body have one solution please tell me
Sometimes it locks up, sometimes it gets stuck at the windows logo durring boot, always displays no gsm rom on boot."
Same thing happened to me. Tried to reflash original ATT ROM , Radio Only, OS only. Gonna send it for the repair. Phone is not under warranty anymore hope that the price of repair will be less than price of new phone.
BTW, is there any way to remove Hard SPL from the phone?
how much was the price of repair?
Try changing you radio to a new one. i have had the same problems in the past with different radio roms and rom versions. so i am using radio 1.54.30.10 with pdavet roms and have had no isuue.
Ray_jai said:
how much was the price of repair?
Click to expand...
Click to collapse
Got my phone back fixed. They charged me for shipping only $19
only $19!?
What if I don't have ATT anymore?
do you know?
i had the same issue check for my previous posts i think no GSM is a common error there is method flashing himalaya rom on hermes to erase GSM sector.
if you cant find the link PM me .
i hope it solves your problem.
tracylynnt said:
Recurring 8525 problem since upgrading to WM6 ROM (AT&T version). The phone will freeze completely (clock doesn't advance, screen and buttons and keyboard don't accept input, display freezes at on or off). When restarted by soft reset, the phone will frequently come back up with no GSM. When that happens, sometimes if I remove the battery and leave the phone off for a few hours then GSM will come back and will work for a while and then lock up again.
When it comes back with GSM service all of the network logon info for GPRS, my Wi-Fi networks with their auth info is gone.
Also email accounts are gone from the account picker and can't be re-created with the same names even though they have completely disappeared. I assume the settings are still in the registry but accounts just aren't showing. One account still shows on the Today screen, but isn't in the account picker.
A hard reset "fixes" things for a while. I've experimented with only installing a few of the most necessary 3rd party apps, without finding any "smoking gun" program that's causing problems. I've also re-seated the SIM card multiple times. I'm thinking it might be a hardware problem.
Today I flashed the radio to 1.54 and it has worked for a couple of hours without needing to be reset.
I'd be interested to hear what possible diagnostic paths I should look at before I call AT&T and begin the rigmarole required by tech support. Anyone with a very similar situation?
Thanks in advance.
Click to expand...
Click to collapse
I've got exact the same symtoms. No GSM, network and auth settings gone, opera registration lost etc. It started a few days a go, in the beginning I had a working GSM most of the time, but it became less and less and now it doesn't have service at all anymore.
Currently device information shows:
ROM version: K's Rom v1.21
ROM date: 10/03/07
Radio version: NONE
Protocol version: NONE
Model No.: HERM300
IMEI: <empty>
Does anyone know a permanent solution?
I have the SAME PROBLEM!
I was about to get radio to work 3 days ago, and now the radio says none.
it's like the radio removed itself.
ok this doesn't make sense, I used the hima rom to remove the radio.
and now the radio is back! wtf?
Hm I tried everything but I can't seem to reflash the radio. About every version I try hangs at 0%. Sometimes when I flash from SD card it hangs at arount 10%.
Tried different SPL versions as well
Damn you radio!!!
BTW, I have no idea what they did to my phone there, but after returning from the AT&T Repair center the Call timer was zeroed and Device ID is now different from what it was before in Skyscape software
Any solutions yet? Im having the same issues.
The reason why Active Sync restarts
For many people the Workaround "not a hack or registry at all" does not work is because of a event based notification that runs the program anytime the time changes. Since your phone updates from the cell tower, it updates the time alot even if by mere seconds well this update runs activesync. Get yourself MemMaid
run it in advanced mode then Jump to Databases then select Notification Queue you will see a list of 3 types of Queues; Time Based, Classic Time Based, and Event based. Go to the event based queue, you should see at the end of this list 3 listing for repllog.exe with the active sync icon. Click on them individualy and read what shows up in the window below put a check mark next to the listing that describes the event as "apprunaftertimechange" it is normaly the last one on list
Also make sure there is no repllog.exe listed in any other queue for a time based event. Leave the other instances of repllog.exe since you still want your device to sync when its connected to the computer. Once you select all events that desribe running repllog.exe after a time change or at a certian time and date press the delete button.
This worked for me on my 8125 and the tilt and if i would of figured this out before i had ATT replace my 8525 i probably would of not got the tilt but lol they gave me tilt free cause all the problems i had with 8525.
let me know if this works for you guys that still see activesync running after the fake server WORKAROUND.
This should work
memmaid is not free but i think its free to try and if all you do with it is fix this problem then great or find a way to register it cause it does help has cool tricks and tweaks
Wow, still no real fixes for this problem, bummer
running memmaid work
running memmaid works and fixes the random start of activesync and once the random start of activesync is fixed the device will not lock up because of activesync this not to say if some other program you may have installed locking you up as well

Categories

Resources