Related
thanks! thanks!
Hi,
read this please : http://forum.xda-developers.com/showthread.php?t=289876
thx!but the wm6 rom is deleted now ,how to get this?
thx!but the wm6 rom is deleted now ,how to get this?
don't know
like my try to ask by pm a guy who have it ,perhaps you will get it
(I did not have response to the request I do)
Cheers
thx!
only to try to ask for guy i very need this
flysoftter said:
i very need this...
Click to expand...
Click to collapse
Don't know about "need" but we all want it!
Looks like we'll have to wait quite a while though.
Guys.
PMing a moderator is NOT the way to get this rom.
A lot of people have the rom. It will get out, you can't hold back the flood. Just be patient. A number of people are stating that they've used it. You know who they are [NOT ME].
This board will not host this rom at this time.
V
Quite right V.
XDA-Devs is far too important to be inviting legal trouble as a result of this (or any other) issue.
I'd suggest that anyone who wants this ROM should either wait patiently (easier said than done - I know - I'm in the same boat!) or get searching somewhere else. It'd be a disaster if this forum was brought to it's knees because of a few impatient people!
hey you!... yes you!...
I know you have WM6, so... please send to me: [email protected]
thanks... je je.
Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony
You really have a lot of reading to do. So much that we cannot post it all here. It has taken an entire forum for all of the information. You need to start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Get familiar with what you can do. First thing you are going to want to do is update the boot loader so you don't brick your device. Read here for more information:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
maxoutput said:
Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony
Click to expand...
Click to collapse
Do not "just install" ... ideally read the wiki first, and then follow instructions on Mrvanx's Guide. Upgrading is pretty painless and easy ... and the guide should keep you on track.
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
If you follow the advice in link #3 above you wont go wrong.
The site referred to gives you all the knowledge and confidence to do the job.
Trust me I learnt the same way, by reading threads.
good luck!
Sorry peeps,just reading the guide above.I typed before i looked,hopefully all will become clear....ish lol
maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
Here is the list you wanted:
Read the wiki
Read the installation guides.
Read the threads concerning the threads on available roms.
Understand what you have read.
Flash your phone.
Here you go... step by step list of everything you need to do to upgrade to the Black 3.0:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=45&Itemid=26
Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.
maxoutput said:
Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.
Click to expand...
Click to collapse
My subjective pick is Black 3.01 ...
Remember to go "Hard SPL" first, and that you need to upgrade your radio seperately.
Right just updated the Hard splv7 and my radio to 1.41.00.10,ive also flashed with black 3.0. Now i cant seem to get a wireless link to work or turn on my bluetooth?
Also does this mean i can flash any cooked rom?
Many thanks Tony
Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony
maxoutput said:
Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony
Click to expand...
Click to collapse
generally speaking, yes.... but be sure you are flashing OS only (unless you want to upgrade your radio too). Most folks are putting out OS only upgrades now, but some replace the radio. once you are hard spl and no longer a flashing virgin, it becomes second nature.
Thanks for everyones help,all sorted,nice one!
Wow what a refreshing read. A noob explaining himself and asking clear questions and members helping him out in an open and non-judgemental way...
Well done everyone!
...and no flames...
Kudos go to MrVanx for those incredible guides.
Yep superb guides and a very noob friendly thread,thanks again peeps.Flashed to a couple of different roms today to check them out.
Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.
just thought it would be easier to get my answer by some good-sensed people unlike myself .......
ive noticed a lot of people made minor mistakes with programs/options/rooted ways and thought it was OK to go .... but caught themselves stuck at the samsung bootloader screen ... SO ... im asking politely ... because i installed a FONT that crashed my system ... im a [email protected]$$ .. i know ... would someone be willing to upload their "twrp backup" of their stock rom ... i installed a font and now my phone wont go past sammy .. already tried factory reset and wont work thru TWRP .. this might help others get their phone back to life also ...
thanks again if someone makes it possible to upload the file somewhere for us all
timmyhawk1983 said:
I KNOW THIS ISNT THE PLACE ... but
Click to expand...
Click to collapse
"...I felt like posting a question in the Development board anyway", right?
Next time I'll happily treat you to the well deserved "Posting in the wrong forum" warning. You may want to keep in mind that we got better things to do than to play "house maidens" and clean up after you.
B.Jay said:
"...I felt like posting a question in the Development board anyway", right?
Next time I'll happily treat you to the well deserved "Posting in the wrong forum" warning. You may want to keep in mind that we got better things to do than to play "house maidens" and clean up after you.
Click to expand...
Click to collapse
im sorry i know you guys dont like getting PM's ... i will follow the rules next time ... i just thought it was a decent idea to let you guys take over and make a new thread to help some of the dummies out including myself who have access to TWRP and stuck at the bootloader screen ...... i apoligize JAY
so no one has done a backup of there stock rom through TWRP ??????????
Give me a sec and ill pm you a link.
no one is going to give you there nandroid at least i wouldn't there is info in it that is personal.
nevermind fellas .. someone gave me the files .. i got it fixed and back to stock .... appreciate the help .. im workin on a little page at the moment in another thread
but ... like u just said blownco ... it does give personal info out and i did a factory restore soon as i noticed
So yeah im completely new to all this stuff
I wanted to install android on my phone, i found a guide to do it (i'd link it but i cant post links since im new) but i need spl 2.08 and my phone has 0.87, i tried to use the hspl4 tool to update it but it works only for 1.4 and above.
So i started investigating and found a way to install the 0.87 onilex, then i searched a way to get it o 1.4 or something but i dint found anything useful
After that i tried to install a rom, for that i used the RhodiumWAdvancedRUU, i used task 29 to clear the whole thing but after that i wasnt able to install any rom, it gets stuck on the boot screen
Any advice would be really apreciated
Nvm i figured how to install roms (i got a really cool one working right now)
But anyways i still need help to change the slp from 0.87 onilex to 2.0 or something like that
Can someone lend me a hand with it please?
Maoh01 said:
Nvm i figured how to install roms (i got a really cool one working right now)
But anyways i still need help to change the slp from 0.87 onilex to 2.0 or something like that
Can someone lend me a hand with it please?
Click to expand...
Click to collapse
Why do you need that if you are able to install custom ROM's...?
If you can flash ROM's, don't worry about it.
I need spl 2.08 ni order to install android ice cream, i could use Hspl4 but it only supports from 1.42 and above while mine is 0.87
btw i'd place all the links im getting the info from, but i cant post links yet
Maoh01 said:
I need spl 2.08 ni order to install android ice cream, i could use Hspl4 but it only supports from 1.42 and above while mine is 0.87
btw i'd place all the links im getting the info from, but i cant post links yet
Click to expand...
Click to collapse
Do you have a TP2? If so please let us know where you got a working copy of something newer than GB which works.
If not, you are in the wrong place.
wizardknight said:
Do you have a TP2? If so please let us know where you got a working copy of something newer than GB which works.
If not, you are in the wrong place.
Click to expand...
Click to collapse
Please define GB (yeah ima noob idk what that is)
And yeah i have a TP2
Maoh01 said:
Please define GB (yeah ima noob idk what that is)
And yeah i have a TP2
Click to expand...
Click to collapse
Ginger Bread.
Please do tell where you got a working copy of ice cream sandwich.
Well as i said i wasnt able to test it since i need spl 2.08, but heres the link
tinyurl - b9ppq8v
(i cant post links yet)
if you guys tell me how to change from 0.8m to 2.08 i'l be able to try it
Maoh01 said:
Well as i said i wasnt able to test it since i need spl 2.08, but heres the link
http://www.makeuseof.com/tag/install-android-ice-cream-sandwhich-htc-hd2-minutes/
if you guys tell me how to change from 0.8m to 2.08 i'l be able to try it
Click to expand...
Click to collapse
um, ya. That is a HD2 phone.
So the question once again is do you have a TP2 phone, because what you linked to will not work on this phone. HD2 ≠ TP2.
wizardknight said:
um, ya. That is a HD2 phone.
So the question once again is do you have a TP2 phone, because what you linked to will not work on this phone. HD2 ≠ TP2.
Click to expand...
Click to collapse
Oh really? dam i'll keep searching then
Maoh01 said:
Oh really? dam i'll keep searching then
Click to expand...
Click to collapse
Ya. The title "Install Android Ice Cream Sandwich On The HTC HD2 In Minutes" kind of gives that little secret away.
Good luck finding anything newer than GB for the TP2.
Maoh01 said:
So yeah im completely new to all this stuff
I wanted to install android on my phone, i found a guide to do it (i'd link it but i cant post links since im new) but i need spl 2.08 and my phone has 0.87, i tried to use the hspl4 tool to update it but it works only for 1.4 and above.
So i started investigating and found a way to install the 0.87 onilex, then i searched a way to get it o 1.4 or something but i dint found anything useful
After that i tried to install a rom, for that i used the RhodiumWAdvancedRUU, i used task 29 to clear the whole thing but after that i wasnt able to install any rom, it gets stuck on the boot screen
Any advice would be really apreciated
Click to expand...
Click to collapse
I'm going to say something that's likely to land me in the doghouse but every one of these threads are here for a reason; legacy or new. I don't mind folks asking questions and I've sure asked my fair number of them too. I get the tutorials may not be well written and can be somewhat "over your head" in nature but many of you need to take the time and read them. Don't just jump in and fire away asking questions that are available and answered...please do your homework. Many of you expect an automatic quick fix...it simply is not that simple. If you need SPL0.85.OliNex...it's been asked, answered and here. One more thing...take the time to edit your signature or let us know what you have, attempted or for the sake argument what is under the hood of your device...you got to tell us otherwise we don't know. I apologize up front for anybody I've offended but all of you newbies need to be more thorough when posting. You need to begin by telling us which device you're using. SPL2.08 is the HTC HD2. You might be in the wrong thread but it too makes my point; please take the time to read these threads. A lot of folks put a tremendous time into their efforts. We expect all of you to do the same, no shortcuts; take care!