having installed the o2 rom update 1.72.181 on my qtek 2020 when i try to install the application suite i get a message saying "unable to install application please update your device rom to the required version before trying again"
device information:
Rom version: 1.72.00wwe
Rom date: 03/15/04
Radio version: 1.17.00
Protocol version: 1337.28
ExtRom version: 1.72.181
if anyone could help or give me any suggestions it would be grately appreciated.
Zeb
Hello
After downgrading my qtek 9090 from ww5 to ww2003se, everything works fine, but can't run notes application. what i'm doing wrong ?
ROM Version: 1.40.00 WWE
ROM Date : 03/10/05
Radio Version: 1.13.00
Protocol version 1337.42
ExtROM version:
There shouldn't be anything wrong. Anyway, try a hard reset. If it still won't work, you might want to consider re-flashing the 1.40 ROM. And didn't you restore your ExtROM? Restore it to 16 MB or higher a little bit and use an official ROM. (You signatures doesn't state an ExtROM that's why I'm saying this). Check out the downgrade instruction in Wiki.
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
There is Radio 1.04.02 supplied with O2 XDA Exec upgrade.
it was already provided in the dopod ROM.
This message just for note
I installed this radio version to my Jasjar yesterday and it's working fine with me till now.
I think it's a lot better than the old version.
Regards,
what is dopod
What is the dopod rom. Sorry for being a newbie here.
Hi all,
Please explain to me how to upgrade only radio. I have JasJar with latest version of firmware.
Thank you
Marek
I just installed in my imate JASJAR_WWE_11353_137_10301 the 1.04.02 radio upgrade.
Seems to be working OK, but I question if following the upgrade the cab files from the Extended ROM has to run again as after the installation only had soft reset.
Default_CAB-Shortcut-CDL-04Aug05.CAB
Default_Enable_VT_RTPlugin_0727_2_signed.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_pIE_View.sa.CAB
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Default_Signed_SSD_Shortcut_WWE.sa.CAB
Default_Signed_UNI_CDL_UAProf.sa.CAB
Default_Signed_Version.sa.CAB
Thanks.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (ATFER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Re: what is dopod
ehabh said:
What is the dopod rom. Sorry for being a newbie here.
Click to expand...
Click to collapse
Actually I don't know what is the dopod rom, all I know is that you can download the latest radio version from the below link.
I downloaded and installed it and it seems to work fine so far.
Battery performance had improved alot after the installation of the new rom.
BT headset had improved as well.
ftp://ftp.xda-developers.com/Universal/
as far as I understood the Dopod Rom is the chinese version of the OS
Wolfgang
mareksuski said:
Hi all,
Please explain to me how to upgrade only radio. I have JasJar with latest version of firmware.
Thank you
Marek
Click to expand...
Click to collapse
Just download the latest radio version from the below mentioned ftp site and flash it to your Jasjar.
You will get an error message in the first time, and then it will be installed correctly in the second time.
After the installtion is complete you will have to hard reset your device.
You can access the ftp site from here:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
At the bottom of the page you will find Universal, and you can click on the universal uploads link.. you will find the radio version there.
Regards,
Hi,
Thanks for an hint but when I click in IE I see folders but no files inside
Marek
mareksuski said:
Hi,
Thanks for an hint but when I click in IE I see folders but no files inside
Marek
Click to expand...
Click to collapse
Just click on the link named "Universal Uploads"
No not click on the link named "Univeral Root"
BetoX said:
I just installed in my imate JASJAR_WWE_11353_137_10301 the 1.04.02 radio upgrade.
Seems to be working OK, but I question if following the upgrade the cab files from the Extended ROM has to run again as after the installation only had soft reset.
Default_CAB-Shortcut-CDL-04Aug05.CAB
Default_Enable_VT_RTPlugin_0727_2_signed.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_pIE_View.sa.CAB
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Default_Signed_SSD_Shortcut_WWE.sa.CAB
Default_Signed_UNI_CDL_UAProf.sa.CAB
Default_Signed_Version.sa.CAB
Thanks.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (ATFER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Click to expand...
Click to collapse
Your extended rom will be installed again after the hard reset is done.
If you don't want the extended rom to be installed again, just do a softreset immediately after the installation of the main rom is finished so you will get the main rom only installed, and then you can chose which items from the exended rom to be installed and which not to be installed according to your needs.
I would advise you to install the extended rom on the SD card not on the main memory as this will save some space on your storage.
Regards,
khaledelfeki, thanks for your reply.
As I mentioned before, I installed the radio upgrade, and it's working OK, but I haven't hard reset the imate yet as it had soft reset, and didn't asked to do it... You think this is correct and doesn't affect the normal use of the imate as the cab files from the Extended ROM where not re-installed?
If you don't want the extended rom to be installed again, just do a softreset immediately after the installation of the main rom is finished so you will get the main rom only installed, and then you can chose which items from the exended rom to be installed and which not to be installed according to your needs.
Click to expand...
Click to collapse
The next time I hard reset the imate (in a week, for different reasons I have to do it 3 or 4 times), I need any special tool or application to see the cab files on the Extended ROM?
Thanks in advance.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Betox,
I don't know about your extended rom because I'm using the Arabic ROM build and the extended rom differs according to the rom type and language.
So, I don't know whether it is correct or not to use the phone without the extended ROM..... but as far as I know it will never effect the main functions of the device.
SO, the best solution is to install the extended rom on the storage card instead of the main memory.
In my case as an example I installed the whole extended rom except the anti firus software which really effects the device speed.
Also I did not install the skype as it does not work in my place.
Furthermore, I did not install the backgammon as I don't use it.
I installed the whole extended rom otherwise.
Regards,
khaledelfeki, thanks for your prompt reply.
My question is how I can see the Extended ROM (and the cab files inside) after the soft reset just after completing the hard reset? File Explorer is OK or I need a special tool or application?
Also FYI, I suspect that this Radio 1.04.02 drains much more battery done the orignal 1.03.01. Has somebody experienced the same?
Thanks again.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
OK, Try the CAB file attached below.
Regarding the battery issue, In my opinion that the battery performance is better than the original Radio Version.
To be more sure, I need to test it for a couple of days more.
Best regards,
OK, Try the CAB file attached below.
Click to expand...
Click to collapse
I'm sorry, but where is the file?
best regards.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
ExtROMUnlocker(for_WM2005_Only).cab
Click to expand...
Click to collapse
Perfect, I can see it now.
Thanks.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
You're most welcome.
You can check this site as well..... I think it will be useful for you.
http://buzzdev.net
Regards,
Is there any location where i can download WM6 for my O2miniS its details are as below
ROM version : 2.21.4.1 WWE
ROM date: 3/9/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.21.4.101
Its a G3 phone and the other details are
IPL: 2.21
SPL: 2.21
Can any one help, also i could not find or i can i could not able to download CID unlock tool from XDA developer ftp site. So could any help me to get my phone unlocked and install the WM6 on it
enggabhinandan said:
Is there any location where i can download WM6 for my O2miniS its details are as below
ROM version : 2.21.4.1 WWE
ROM date: 3/9/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.21.4.101
Its a G3 phone and the other details are
IPL: 2.21
SPL: 2.21
Can any one help, also i could not find or i can i could not able to download CID unlock tool from XDA developer ftp site. So could any help me to get my phone unlocked and install the WM6 on it
Click to expand...
Click to collapse
why posting here where you can go to wizard section? There you find all the things u need to upgrade your miniS to WM6
enggabhinandan said:
Is there any location where i can download WM6 for my O2miniS its details are as below
ROM version : 2.21.4.1 WWE
ROM date: 3/9/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.21.4.101
Its a G3 phone and the other details are
IPL: 2.21
SPL: 2.21
Can any one help, also i could not find or i can i could not able to download CID unlock tool from XDA developer ftp site. So could any help me to get my phone unlocked and install the WM6 on it
Click to expand...
Click to collapse
As far as I know O2MiniS = HTC Wizard = T-Mobile MDA (Vario) = Cingular 8125
--eluth
WM6 for O2 mini
Hi,
I need Windows Mobile 6 for my O2 mini device.
Can anyone help?
E-Mail me on: [email protected]gmail.com
Thanks!
i just bought a used o2 exec I want to flash it but when i looked in device info it says my radio version is 0.00.00, is this bad? It looks like its the orignal o2 ROM, everything else looks fine...
ROM version: 1.30.107 WWE
ROM date: 04/11/06
Protocol version: 42.37.P8
ExtROM version: 1.30.162 WWE
and my bootloader is version: 2.01
Unlocked...
Radio ROM Version 0.00.0 Is A Special Radio Used To Unlock The Device.
My Guess Is That They Unlocked It Before Selling You It And Didnt Reflash The Radio.
Next Time You Flash Your Device Flash The Radio Rom Aswell.
Regards,
OllieD
OllieD said:
Radio ROM Version 0.00.0 Is A Special Radio Used To Unlock The Device.
My Guess Is That They Unlocked It Before Selling You It And Didnt Reflash The Radio.
Next Time You Flash Your Device Flash The Radio Rom Aswell.
Regards,
OllieD
Click to expand...
Click to collapse
thank you.
good radio you have in T-mobile version: 1.17.00 - for me the best, and other also very popular is 1.18.00 ...
best!
My Universal left unuse for a couple months and radio changed to 0.00.00 .
I just flashed it and upgrade to WM6 rom, but failed.
Somehow, use MaUpgradeUt_noID.exe to fix it (new ce and radio) and run for a week now.