Related
Hi guys,
I'm trying to edit a Universal ROM starting from nk.nbf and I'm experiencing a problem: cooked rom starts but shows taskbar with clock working properly but the remaining part of the screen seems not to draw anything and shows welcomehead image... and does not respond to taps or keypress (only powerbutton and backlight buttons working properly)
I'm used to cook roms with kitchens, so I followed these steps:
1. decode nk.nbf > nk.nba with htc tool
2. prepare_imgfs nk.nba -nosplit
3. viewimgfs imgfs_raw_data.bin
4. deleted and modified files
5. converted default.hv and user.hv in .rgu files with RGU.exe tool
6. edited .rgu registry files:
keeping key sorted as found in extracted files
every value is headed by key (not multiple values for a single key)
HKCU in user.rgu
HKLM and HKCR in default.hv7. converted .rgu files in .hv
the RGU.exe tool adds in user.hv the value
[KKEY_LOCAL_MACHINE\System\ObjectStore\RegistryUpdate]
"boot.rgu"=hex:79,41,C3,2D,24,BD,72,20,37,79,E7,A0,B2,A9,03,CF
How to create boot.rgu?8. replaced registry hives in dump folder
9. buildimgfs
10. make_imgfs nk.nba -noplit
I've found in KKEY_LOCAL_MACHINE\System\ObjectStore\RegistryUpdate some references to .rgu files that are not included in the rom... should i delete all .dsm files and registry references?
Thanks all...
missing rgu have been deleted before flashing, as Leo did for his latest rom 05, so your source rom is unusable
Thanks...
OK... now the new AKU 0.7.0 is available with .rgu files builtin... but rom behaviour is the same... how to work with packages.sof?
If I move all files recreating the same directory structure of a "working" kitchen and running BuildOS.exe, shall I sort out the problem?
marco.minetti said:
OK... now the new AKU 0.7.0 is available with .rgu files builtin... but rom behaviour is the same... how to work with packages.sof?
If I move all files recreating the same directory structure of a "working" kitchen and running BuildOS.exe, shall I sort out the problem?
Click to expand...
Click to collapse
you may have look here http://forum.xda-developers.com/showthread.php?t=324682
http://forum.xda-developers.com/showthread.php?t=309562
it is a nice way to cook a ROM
Thanks...
Usual cause of a startup like you descibe is a corrupt initflashfiles.dat - have you edited it directly?
If so the first 2 bytes need to removed by a hex editor to work properly.
Came from official htc kaiser, based from pdacorner.v9 and tools from bepe (thanks for him)
OS 5.2.19209 Build 19209.1.0.2
Not included:
- OEMApps
- OEMOperators
You need Microsoft Visual C++ 2008 Redistributable Package to using this kitchen
Updated:
- Added os.nb.payload
- Added initflashfiles.dat
Download PART1
Download PART2
Donations are welcome
Finally, A Kitchen on 19209.
Really thanks abusalza for your enormous Gift
Pouvez-vous poster un autre lien de telechargement svp, je n'arrive pas a telechargder depuis megaupload.
merci!
An other link please, i can't download from megaupload.
Thanks!
Good show sir, id highly recommend everybody making thier own ROMs based on thier own needs. Freedom of choice is always best.
Awesome brother!!!
This 19209 is the best wm6.1 build...thanks!
Quick query for people....anybody getting unhandled exceptions in buildOS?
aswell as buildxip errors?
mrvanx said:
Quick query for people....anybody getting unhandled exceptions in buildOS?
aswell as buildxip errors?
Click to expand...
Click to collapse
yup.......
mrvanx said:
Quick query for people....anybody getting unhandled exceptions in buildOS?
aswell as buildxip errors?
Click to expand...
Click to collapse
yap, i get errors too
same here..
Ive narrowed it down to the OEM folder, however im not sure what the exact issue is. Ive just replaced the OEM stuff with my own from "V10 Roller". Remember to add os.nb.payload into theROM folder or you will get an error when the insert program is run.
Also getting exceptions, tried replacing the OEM folder with a known good one but it's still happening. Any suggestions?
caeci11ius said:
Also getting exceptions, tried replacing the OEM folder with a known good one but it's still happening. Any suggestions?
Click to expand...
Click to collapse
Well, I think I solved this problem.
mrvanx said:
Ive narrowed it down to the OEM folder, however im not sure what the exact issue is. Ive just replaced the OEM stuff with my own from "V10 Roller". Remember to add os.nb.payload into theROM folder or you will get an error when the insert program is run.
Click to expand...
Click to collapse
Thanks to mrvanx's hint, I compared each OEM directories with my old kitchen tools. Then I found some stuff is missing in 'OEM\OEM_Lang_0409' directory.
So I copied my old stuff into it, then Error was gone.
Edit:
Well, I found what the problem is. the 'initflashfiles.dat' is missing in 'OEM\OEM_Lang_0409' directory. If there is 'initflashfiles.dat' even if it is 0 bytes, then this problem is solved.
I dont want to sound dumb here, but where can i get the os.nb.payload file?
curveconcepts said:
I dont want to sound dumb here, but where can i get the os.nb.payload file?
Click to expand...
Click to collapse
Not a stupid question at all....
..download a known working rom based on 19209 (theres a few around)....to get os.nb.payload from it do these following things:
(using the programs in the TOOLS folder in this kitchen)
get the os.nb from the RUU_Signed.nbh file using nbhtool (in TOOLS/HTOOLS)
split the os.nb file into os.nb.payload and os.nb.extra using:
"nbsplit -hermes os.nb" on the command line. (the nbsplit.exe must be in the same dir as os.nb before you do it).
DONE.....slap os.nb.payload into the ROM folder when uve done it.
i've tried to updated my kitchen. fiuh... very hard work. my connection was bad. God help me
Help!
Hello!
Give me please - very confused: (
Downloading kitchen, treasure initflashfiles.dat in OEM_Lang_0409, taking the OS.NP.PAYLOAD from PDACorner V9, run BuildNB.bat
BuildOS compiles all successfully, but further writes:
ImgfsFromNb 2.1RC1
Sector size is 0x200 bytes
ImgFs partition starts at 0x00620000 and ends at 0x04080000
No IMGFS signature found. Exiting.
ImgfsFromDump 2.1rc2
Input file imgfs.bin cannot be opened. Exiting.
ImgfsToNb 2.1RC1
Using bigstoragemove mode
Input file imgfs-new.bin cannot be opened. Exiting.
NBMerge 2.1RC1
Could not open input file OS-new.nb.payload
What am I doing wrong? Give please!
Yet more problems. There seems to be issues with some of the programs in the kitchen. By replacing BuildOS with another version I had around I managed to get it to run and not throw exceptions (tried the other posted solutions but had no luck with them) but it seems another program is giving me issues now. Logs:
Creating 'dump' folder...
Done!
BUILDXIP 0.54 Copyright (c) 2007-2008 bepe 30 Jan 2008
Slot 0 Boundary: 0x01fa0000
Slot 1 Boundary: 0x03e33000
RAMStart: 0x802ac000
RAMFree: 0x802e6000 - 0x83a00000 L0371a000
KernelFlags: 0x00000000
FSRamPercent: 0x00000020
Done!
Copying OS.nb.payload...
1 file(s) copied.
The system cannot execute the specified program.
Could Not Find J:\kitchen\buildpkg.wrn
The system cannot execute the specified program.
ERROR! (errorlevel: 9020)
Press any key to continue . . .
Looking at the batch files, this would indicate me that "all_packages_to_one" and "insert" are having problems (these are the lines where "cannot execute" appears). I thought it might have been a problem with 7zip, which I used to extract the archive but WinRAR has the same issue. No idea what's going on here, it's a very odd problem...
baxxik said:
Hello!
Give me please - very confused: (
Downloading kitchen, treasure initflashfiles.dat in OEM_Lang_0409, taking the OS.NP.PAYLOAD from PDACorner V9, run BuildNB.bat
BuildOS compiles all successfully, but further writes:
ImgfsFromNb 2.1RC1
Sector size is 0x200 bytes
ImgFs partition starts at 0x00620000 and ends at 0x04080000
No IMGFS signature found. Exiting.
ImgfsFromDump 2.1rc2
Input file imgfs.bin cannot be opened. Exiting.
ImgfsToNb 2.1RC1
Using bigstoragemove mode
Input file imgfs-new.bin cannot be opened. Exiting.
NBMerge 2.1RC1
Could not open input file OS-new.nb.payload
What am I doing wrong? Give please!
Click to expand...
Click to collapse
Try a different os.nb.payload fromanother ROM. The one bundled with pandora beta 9 works fine.
caeci11ius said:
Yet more problems. There seems to be issues with some of the programs in the kitchen. By replacing BuildOS with another version I had around I managed to get it to run and not throw exceptions (tried the other posted solutions but had no luck with them) but it seems another program is giving me issues now. Logs:
Creating 'dump' folder...
Done!
BUILDXIP 0.54 Copyright (c) 2007-2008 bepe 30 Jan 2008
Slot 0 Boundary: 0x01fa0000
Slot 1 Boundary: 0x03e33000
RAMStart: 0x802ac000
RAMFree: 0x802e6000 - 0x83a00000 L0371a000
KernelFlags: 0x00000000
FSRamPercent: 0x00000020
Done!
Copying OS.nb.payload...
1 file(s) copied.
The system cannot execute the specified program.
Could Not Find J:\kitchen\buildpkg.wrn
The system cannot execute the specified program.
ERROR! (errorlevel: 9020)
Press any key to continue . . .
Looking at the batch files, this would indicate me that "all_packages_to_one" and "insert" are having problems (these are the lines where "cannot execute" appears). I thought it might have been a problem with 7zip, which I used to extract the archive but WinRAR has the same issue. No idea what's going on here, it's a very odd problem...
Click to expand...
Click to collapse
You can use Microsoft Visual C++ 2008 Redistributable Package.I had the same error end it solved it.
Hive and registry file editor 2.0.112
A command line utility to work with hv files.
Full Unicode support, and more.
!!! WARNING !!!
Do not use CeRegEditor (cereg) to work with .hv !!!
!!! WARNING !!!
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
Release history:
---------------------
V. 2.0.112
+ Some changes.
V. 2.0.035
+ Extract hive to the .hvm text file.
+ Build hive from .hvm file.
V. 1.0.000 (Initial Release)
Don't need Unicode??
and I'm wondering whether the "REGEDIT4" is needed.
btxakita said:
Don't need Unicode??
Click to expand...
Click to collapse
Who spoke?
btxakita said:
and I'm wondering whether the "REGEDIT4" is needed
Click to expand...
Click to collapse
Yes.
NEW Release
V. 2.0.035
Added new functions:
+ Extract hive to the .hvm text file in Unicode format.
+ Build hive from .hvm file.
AnDim
AnDim said:
NEW Release
V. 2.0.035
Added new functions:
+ Extract hive to the .hvm text file in Unicode format.
+ Build hive from .hvm file.
AnDim
Click to expand...
Click to collapse
A dump question I'm sure, I started cooking recently and I'm wondering what I could accomplish with this application. In what scenario would I use it? Thanks, 12
Thanks. One problem I had w/ rgucomp is missing unicode support.
12aon said:
A dump question I'm sure, I started cooking recently and I'm wondering what I could accomplish with this application. In what scenario would I use it? Thanks, 12
Click to expand...
Click to collapse
What exactly is not clear?
Thanks AnDim, this makes GSM -> CDMA SYS porting much easier.
AnDim said:
What exactly is not clear?
Click to expand...
Click to collapse
Well I think I'm starting to understand. As I always have had the luxury of initflashfiles.txt or app.reg and never edited the .hv manually. It was unclear to me why I would need this or what it would add to a kitchen that supports those features (initflashfiles.txt and app.reg)
So does this app have a function in such a kitchen, I mean is there anything I will need to do manually that can't be done otherwise or is this more like a general app so that the hives on any phone can be more easily changed?
Thanks 12
@AnDim, PMed you.
Have anyone used this program? It's not working well for me. I use it fo rgu to hv convert but when i compare the output hv file with cereg alot different files
prpetrov said:
I use it fo rgu to hv convert but when i compare the output hv file with cereg alot different files
Click to expand...
Click to collapse
!!! WARNING !!!
Do not use CeRegEditor (cereg) to work with .hv !!!
how does project folder need to be set up to build default and user hv's?
BUG: Default value is imported and exported incorrectly
If I convert an rgu which contains
Code:
@="one"
"Default"="two"
hvedit overwirtes the default value with "two"
Request: option to specify output file
selyb said:
how does project folder need to be set up to build default and user hv's?
Click to expand...
Click to collapse
HVEdit.exe <My project folder>
Don`t need to be setup. Rgu´s, packages.sof and so on, can be in any sub folders.
selyb said:
BUG: Default value is imported and exported incorrectly
If I convert an rgu which contains
Code:
@="one"
"Default"="two"
hvedit overwirtes the default value with "two"
Click to expand...
Click to collapse
Hey man .... Key name "Default" == Key name @
selyb said:
Request: option to specify output file
Click to expand...
Click to collapse
??? f.e.
AnDim
sorry, I misunderstood. Until now, I didn't know you could use "Default"=
selyb said:
Request: option to specify output file
Click to expand...
Click to collapse
What I mean is like
Code:
hvedit myhive.hv myhive.txt
so hvedit would export myhive.hv to myhive.txt
selyb said:
What I mean is like
Code:
hvedit myhive.hv myhive.txt
so hvedit would export myhive.hv to myhive.txt
Click to expand...
Click to collapse
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
AnDim
AnDim said:
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
AnDim
Click to expand...
Click to collapse
Hi,
thanks for this software it works great, if you now how to put this commands.
My experience was this:
D:\>hvedit.exe hive d:\hive
or:
D:\>hvedit.exe hive d:\hive\user.hv
I'm getting this:
(HVEdit) !ERROR: failed building DEFAULT hives.
When I copy HVEdit.exe and cereg400.dll to d:\hive and run this:
D:\hive>hvedit.exe d:\hive\user.hv
I'm getting this:
Admsoft (R) HVEdit Version 2.0.035
Hive and registry file editor.
(C) 2009 AnDim, XDA-Developers.
(HVEdit) Extracting user.hv ...
(HVEdit) Done! and only 21.kB of 69kB .hv file
When I run it on system.hv like this:
D:\hive>hvedit.exe d:\hive\system.hv
I'm getting this:
(HVEdit) Extracting system.hv ...
ERROR: C:\MacB\private\winceos\COREOS\filesys\reg\reghive\.\registry.c line 172: Reg: Invalid reghandle 0x20000a61
and 144kB .hvm file of 105kB .hv
I didn't mention it but I was trying to convert .hv to .hvm
Maybe my dump has got some errors in it.
Any idea what is wrong, why the user.hvm is so small?
Thank you AnDim for great software. It is quite difficult to find out utility for ce hive.
After use for a period I would to to report some small problem.
1. Long multi string was trimed. (Maybe fixed length variable in code) See Ex.
Registry key in my rgu file is
REGEDIT4
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt]
"DirsToExclude"=multi_sz:"\\mxip_initdb.vol",
"\\mxip_system.vol",
"\\mxip_notify.vol",
"\\mxip_lang.vol",
"\\cemail.vol",
"\\pim.vol",
"\\Documents and Settings\\default\\user.hv",
"\\Documents and Settings\\system.hv",
"\\Windows\\Profiles\\guest\\Temporary Internet Files\\",
"\\Windows\\Profiles\\guest\\Cookies\\",
"\\Windows\\Profiles\\guest\\History\\",
"\\Windows\\Activesync\\",
"\\Windows\\messaging\\",
"\\Temp\\"
After change to boot.hv and extract back to boot.hvm the Registry is as hereunder.
; Admsoft (R) HVEdit Version 2.0.035
; Hive and registry file editor.
; (C) 2009 AnDim, XDA-Developers.
;
;
; Source file: boot.hv
; Size: 28672 byte
; Hash: e9e4f2edd12c78eeed7aceeaea22c36f
; Boothash: 1ef4fb8f2b109c0757709e7f46c71a20
; Build tool: HVEdit v2.0
[HKEY_CLASSES_ROOT]
[HKEY_CURRENT_USER]
[HKEY_LOCAL_MACHINE\System\ObjectStore\RegistryUpdate]
"boot.rgu"=hex:1E,F4,FB,8F,2B,10,9C,07,57,70,9E,7F,46,C7,1A,20
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt]
"DirsToExclude"=multi_sz:"\\mxip_initdb.vol",
"\\mxip_system.vol",
"\\mxip_notify.vol",
"\\mxip_lang.vol",
"\\cemail.vol",
"\\pim.vol",
"\\Documents and Settings\\default\\user.hv",
"\\Documents and Settings\\system.hv",
"\\Windows\\Profiles\\guest\\Temporary Internet Files\\",
"\\Windows\\Profiles\\guest\\Cookies\\",
"\\Windows\\Profiles\\guest\\History\\",
"\\Windows\\Activesync\\"
[HKEY_USERS]
; (HVEdit) Done!
2.The size of hv file is larger than original. (This is not effect functional just file size is increase from 732kb to 744kb for instance.)
After investigate, there was extra length on data key which have length just fit 32 bits size. (Maybe when adjust cell size to fit 32 bits)
Hope my comment will be some benefit for you for next version.
Regards,
AnDim said:
Hive and registry file editor 2.0.035 (C) 2009 AnDim
A command line utility to work with hv files.
Full Unicode support, and more.
!!! WARNING !!!
Do not use CeRegEditor (cereg) to work with .hv !!!
!!! WARNING !!!
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
Release history:
---------------------
V. 2.0.035
+ Extract hive to the .hvm text file.
+ Build hive from .hvm file.
V. 1.0.000 (Initial Release)
(C) 2009 AnDim
Click to expand...
Click to collapse
This seems to be JUST what I am looking for .... but I am having problems trying to use I suspect is simply a case of finger-trouble on my part, so will greatly appreciate any help available from AnDim or any other users who can point me in the right direction, please.
I think I correctly understand the command line syntax and have run HVEdit to unpack a default.hv registry file taken from a dumped ROM (Toshiba TG01). I then made some basisc edits to the resulting .hmv file and used HVEdit again to recompile back to .hv.
When the ROM is recompiled and flashed it refused to boot. So I went back and tried using HVEdit to convert to .hmv and back without making any changes. Same problem.
I have attached the .bat files i used to run for reference....View attachment 305797
I have been reading about a need to insert REGEDIT4 at the start of the file; have tried doing so but that just results in an error.
Any guidance will be greatly appreciated
Request Response !!
Is anyone able to offer any assistance on this question please
Help will be much appreciated !
kevinpwhite said:
This seems to be JUST what I am looking for .... but I am having problems trying to use I suspect is simply a case of finger-trouble on my part, so will greatly appreciate any help available from AnDim or any other users who can point me in the right direction, please.
I think I correctly understand the command line syntax and have run HVEdit to unpack a default.hv registry file taken from a dumped ROM (Toshiba TG01). I then made some basisc edits to the resulting .hmv file and used HVEdit again to recompile back to .hv.
When the ROM is recompiled and flashed it refused to boot. So I went back and tried using HVEdit to convert to .hmv and back without making any changes. Same problem.
I have attached the .bat files i used to run for reference....View attachment 305797
I have been reading about a need to insert REGEDIT4 at the start of the file; have tried doing so but that just results in an error.
Any guidance will be greatly appreciated
Click to expand...
Click to collapse
Here a new version of that very important tool.
First of all, thanks to mamaich and tadzio for creating the versions before!
And also for Da_G for helping and testing with this version.
WARNING: I've added a more WM like handling of files. That might mean that some of the dump protections are not working anymore, did not try myself yet... but if the OS can read the files, why should this tool not be able to do it? :$ ... was not my intention anyway, and I really didn't try it yet.
Intention was to make the tool faster and it is now! Different algorithms and different way for decompression does the trick.
ImgfsToDump v3
Code:
ImgfsToDump.exe imgfs.bin
this does the same job as the old one, but faster
Code:
ImgfsToDump.exe os.nb
... ok, that is new ... can dump from OS.nb, OS.nb.payload with auto detection and without extracting imgfs.bin
Code:
ImgfsToDump.exe -v os.nb
-v[erbose] ... yeah, there is an option now to simulate and so to only show file names on screen
Code:
ImgfsToDump.exe -w *.mui os.nb
-w[wildcard] ... most useful part I think... this will only extract all the mui files from the ROM
Code:
ImgfsToDump.exe -v -w flashlite.dll os.nb
this is useful for quickly check if a rom contains a specific file.. it will only show the result on the screen if the file exists, but not dump the file
Also added some bat files that work with drag and drop... just drag an os.nb and drop it onto one of the bat files
Code:
Wildcard: *.cpl
IMGFSTODUMP 3 Copyright (c) 2009-2010 bepe Oct 16 2009 14:07:12
cplmain.cpl
historyui.cpl
ipsecvpnui.cpl
MyPhoneLauncher.cpl
AGPSSettingsCPL.cpl
ConnectionSetup.cpl
TaskManager.cpl
MyCpl.cpl
Done!
ImgfsToDump v3.1 Beta
ADD: It's working with packages now, check out the bat files
FIX: Wildcards ignore case now
ADD: New option: [-build] extract files into packages
ADD: New option: [-type <OEM|SYS>] extract only SYS or OEM packages
ADD: New option: [-pkgwildcard <wildcard>] Wildcard for filtering packages
Code:
ImgfsToDump.exe -b os.nb
- Extract into packages
Code:
ImgfsToDump.exe -b -t OEM os.nb
- Extract only OEM packages
Code:
ImgfsToDump.exe -b -t OEM -p *adobe* os.nb
- Extract only OEM packages that contain 'adobe' in the package name
ImgfsToDump v3.2 Beta
ADD: HTC NBH support
ADD: New Layer system
REMOVED: -l -n option
ADD: XIP extraction .... don't tell me that the exe name is not fitting anymore :$
ADD: OS version and build output (only if you are building packages and only with .nbh .nb .xip)
ADD: Some Device information (only for .nbh .nb)
ImgfsToDump v3.2 Beta 2
ADD: Emulator ROM Support
ADD: options for XIP and IMGFS... IMPORTANT: allmost all options have been changed!
ImgfsToDump v3.3 Beta 2
FIX: XIP modules are working now
ADD: Extract compressed XIP sections
ImgfsToDump v3.3 Beta 3
ADD: LZX working now
xidump v1.0 Beta
ADD: Fix for invalid OEM certs
best regards
bepe
Great update bepe, thanks!
Thanks bepe.
As always, great work bepe. Testing now...
very nice !!!
Thanks bro
Tom
Sounds good, thanks bepe
Thanks Bepe again. Is it compatible with your platform builder?
Wow cool
Speed is actually what we need when got a new 200+ Official ROMIMAGE
Thanks bepe for the update
nice
very nice !!!thx
Thank you to share
awesome!
thanks bepe
nice update
thanks
I‘m a chinese ,and thank's for your software .
wonderful Bepe. many thanx.
Nice work！ ths
Great update bepe, thanks!
new Beta
A bit early... but here is a new version to try.
It's still a beta, but has some new options for building packages.
thanks again bepe
i will give it a try as well.
EDIT: the tool works fine, but don't you think you need to add "/D" switch in the batch files here
Code:
cd /D %path_arg%
Grest tools, thanks
GUIDE
Post 1: nbhTool
Post 2: nbTools
Post 3: binTools
----------------------------------------------------------------
nbhTool 0.2 beta with SOURCE
AKA: Old nbh tools does not support new WP7 HTC device any more, so i made a new tool - nbhTool.
UPDATE 0.2 beta: 11.10.05
fixed some bugs
open source!!!!!
maybe someone can make a GUI one!
==================================================
UPDATE 0.1 beta: 11.09.22
added nbh split to nbhMerge so rename it to nbhTool
script now support '#' to make a note and Blank lines won't be error
added some functions
fix some bug
NOTE: it won't support script file of last version, just split a nbh file and you'll get a new scrpit.
Usage:
#Merge a nbh file use Script file:
nbhTool <Script>
e.g. nbhTool Mozart.txt
#Split a nbh file and create a Script file:
nbhTool -split <nbhFile> <Script>
e.g. nbhTool -split RUU.nbh Mozart.txt
NOW: i think it'll support all HTC WP7 Device, i test it with HTC HD7 & HTC Mozart Mango shipped Rom.
This tool is compiled by MinGW, so it can run without any runtime lib.Just test it and have fun, if any bugs just pm me.
nbTools - Split & Merge OS.NB Tools
nbSplit 0.2 beta - Split OS.NB File
if you used htcRIE to split a os.nb, i will tell you this tool is working in a different way.it just get BIN files only without addon bits from os.nb, so it only works with our tools to modify.
you can use this tool to get BIN Files from os.nb
USAGE:
nbSplit <OS.NB File>
Example:
nbSplit os.nb
Changelog:
0.1 beta first release version
0.2 beta fix a bug on split imgfs partition
Note:
this tool is only supported Roms of the 1st generation HTC WP7 Device and HTC HD2.
Tips:
just Drop the os.nb to nbSplit.exe can split os.nb directly.
nbSplit 0.2beta.zip
--------------------------------------------------
BINInsert 0.2 alpha - Insert BIN Files to OS.NB
Now it works, but not full functions, only support partitions below:
LOGO, BLDR, DPP, SLDR1, SLDR2, NK, IMGFS
Info:
For BINInsert 0.2 alpha
solved imgfs.bin file size must < 313.25M and i found a bug of nbSplit!
i will update BINInsert & nbSplit when i go back home tonight!
Still waiting someone who knows os.nb format well to help me solve my last 2 problem:
1.how to rebuild the last 2 blocks of IMGFS partition
2.how to rebuild the block right after LOG blocks in partition start
but tools can be used now, i just want my tool better
For HD2
maybe it'll work but not test now, some bits is different, so i'm not sure!
USAGE:
BINInsert -L <LOGO.BIN File> <OS.NB File> <New OS.NB File>
BINInsert -B <BLDR.BIN File> <OS.NB File> <New OS.NB File>
BINInsert -D <DPP.BIN File> <OS.NB File> <New OS.NB File>
BINInsert -S1 <SLDR1.BIN File> <OS.NB File> <New OS.NB File>
BINInsert -S2 <SLDR2.BIN File> <OS.NB File> <New OS.NB File>
BINInsert -N <NK.BIN File> <OS.NB File> <New OS.NB File>
BINInsert -I <IMGFS.BIN File> <OS.NB File> <New OS.NB File>
Example:
BINInsert -L LOGO.BIN OS.NB OS-new.NB
BINInsert -N NK.BIN OS.NB OS-new.NB
BINInsert -I IMGFS.bin OS.NB OS-new.NB
Changelog:
0.1 beta - first release version
0.2 beta - add DPP & IMGFS partition insert functions
BINInsert 0.2alpha.zip
WPBinaryTool 0.6.0
This place for my test version of windows phone binary tool:
I don't test the insert function, but it SHOULD work.
Use it on your own risk.
Feed back: [email protected]
Supported:
SLDR1
SLDR2
LOGO
Transfer these binary files to sth you can edit.
decompress logo will extract two bitmap image file.
decompress sldr will extract the binary file with witch you can use xidump to dump & pack.
Usage:
WPBinaryTool [-d(ecompress)|-c(ompress)|-i(nsert)] [-l(ogo)|-s(rpx)] <INPUT-FILENAME> (<INPUT-FILENAME-2>) <OUTPUT-FILENAME>
if you want to (de)compress logo/insert binary file to NB file, you should input two INPUT-FILENAME
Samples:
WPBinaryTool -d -l Logo.bin logo.bmp charge.bmp
WPBinaryTool -c -l logo.bmp charge.bmp Logo.bin
WPBinaryTool -d -s SLDR1.bin SLDR1.uncompr.bin
WPBinaryTool -c -s SLDR1.uncompr.bin SLDR1.bin
WPBinaryTool -i -l Logo.bin os.nb os.out.nb
Note:
Take your own risk to do all these things.
ChangeLog:
0.6.0 add insert function, add support of complex bitmap picture.
0.5.2 fix bmp header "84-03" issue, now will read in the right way;
0.5.1 initial release;
well done,thx for sharing
Nice work!~thanks a lot
Nice work!
Waiting for other device support.
Schubert OK
Hi!
You make my day,
So long I'm searching for way to rebuild my nbh files to create my own costum roms.
now I'm able to make costum roms too.
Flashed back a Schubert original 1.54 rom & installed HSPL
extract a 5.66.09.21a radio.nb from ansars costum radio rom
with hex editor i found out which CID's and languages ansar used
merg it back with your tool and try to flash it.
it works perfect.
thanks
Very glad this is working for you.
Now,we are trying to spend our spare time to do something funny~
Hope u can find more sweeties here next week~
UPDATE: 11.09.22
added nbh split to nbhMerge so rename it to nbhTool
script now support '#' to make a note and Blank lines won't be error
added some functions
fix some bug
NOTE: it won't support script file of last version, just split a nbh file and you'll get a new scrpit.
Usage:
#Merge a nbh file use Script file:
nbhTool <Script>
e.g. nbhTool Mozart.txt
#Split a nbh file and create a Script file:
nbhTool -split <nbhFile> <Script>
e.g. nbhTool -split RUU.nbh Mozart.txt
NOW: i think it'll support all HTC WP7 Device, i test it with HTC HD7 & HTC Mozart Mango shipped Rom.
Great work mate
works great for my hd7 kitchen
cheers
nice work！
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
hoping a GUI
btxakita said:
This place for my test version of windows phone binary tool:
maybe you can't use this tool for now
because our new tool "nbsplit" and "nbmerge" is not ready yet
but if you know how these things work, you can try it yourself.
Supported:
SLDR1
SLDR2
LOGO
Transfer these binary files to sth you can edit.
decompress logo will extract two bitmap image file.
decompress sldr will extract the binary file with witch you can use xidump to dump & pack.
Usage:
WPBinaryTool [-d(ecompress)|-c(ompress)] [-l(ogo)|-s(rpx)] <inputfilename> <outputfilename>
if you want to (de)compress logo part, you should input two bmp filename
Samples:
WPBinaryTool -d -l Logo.bin logo.bmp charge.bmp
WPBinaryTool -c -l logo.bmp charge.bmp Logo.bin
WPBinaryTool -d -s SLDR1.bin SLDR1.uncompr.bin
WPBinaryTool -c -s SLDR1.uncompr.bin SLDR1.bin
Note:
Take your own risk to do all these things.
Click to expand...
Click to collapse
Hi,
I was able to decompress de logo and charge.bmp, edited both BMP with GIMP2.0 but when I start compress WPBinaryTool crashes.
If I do not make any changes to the bmp files WPBinaryTool works.
Anyone else tried this?
Thanks for the tool.
dotcompt said:
Hi,
I was able to decompress de logo and charge.bmp, edited both BMP with GIMP2.0 but when I start compress WPBinaryTool crashes.
If I do not make any changes to the bmp files WPBinaryTool works.
Anyone else tried this?
Thanks for the tool.
Click to expand...
Click to collapse
Simple way is: Edit logo.bmp file which was generated when you decompress. Eg: Open that logo.bmp by paint application, then edit it.
Great work! Thanks for that!
But I'm looking for a way to "implant" my newly made LOGO.bin (with my own Logo's in it) into os.nb...How can I achieve that?
Thanks!
dotcompt said:
Hi,
I was able to decompress de logo and charge.bmp, edited both BMP with GIMP2.0 but when I start compress WPBinaryTool crashes.
If I do not make any changes to the bmp files WPBinaryTool works.
Anyone else tried this?
Thanks for the tool.
Click to expand...
Click to collapse
you can send your bmp file to my email [email protected]
those crash is caused by the deference between Windows Bitmap Image format and your GIMP2.0.
It works with GIMP. But when you save it, you have to choose "Advanced Options" and then you have to choose "24 Bit", because Windows Phone 7 needs this setting. But I haven't found a way to implant the selfmade LOGO.bin into my os.nb...
-WP7User- said:
It works with GIMP. But when you save it, you have to choose "Advanced Options" and then you have to choose "24 Bit", because Windows Phone 7 needs this setting. But I haven't found a way to implant the selfmade LOGO.bin into my os.nb...
Click to expand...
Click to collapse
we are working on this - nbMerge.i got crazy on LOG Blocks of os.nb. if someone know os.nb format well, just pm me, i think exchange information can make our project moves faster!
btxakita said:
you can send your bmp file to my email [email protected]
those crash is caused by the deference between Windows Bitmap Image format and your GIMP2.0.
Click to expand...
Click to collapse
Thanks mate but I finally made it. The trick is using Paint and simple graphics otherwise WPBinaryTool will go out of memory
dotcompt said:
Thanks mate but I finally made it. The trick is using Paint and simple graphics otherwise WPBinaryTool will go out of memory
Click to expand...
Click to collapse
Yeah... just a simple graphic.
Update & Open Source, so maybe someone can make a GUI one!