I'm looking for the registry entries for the microsoft bluetooth stack on a ppc2003se device and maybe the bt dlls in the windows directory. I downloaded a imate jam rom, but I can't figure out how to extract the information I need from it If someone could provide me with a copy of their registry entries (i think all the important ones are stored at HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\), I would greatly appreciate it. Thank you for your time!
Jason
P.S. In case you are wondering, I'm trying to restore full bluetooth functionality to my crippled samsung i730 verizon phone (mostly I want the DUN profile). It uses the ms stack and the main (only?) problem appears to be that some of the registry entries have been removed. If I can compare my registry entries to working entries, I'm hoping I can find the solution!
you can extract all files from ROM with dumprom tool, then convert default.fdf to defailt.reg with fdf2reg.pl script.
The BT DLLs from jam's rom would be useless for you - they are XIP.
Thanks for the info on the dlls, i didnt know what arcitecture the jam used. As for the dumprom tool, I tried it multiples times in different configurations to no success (nk.nbf, nk.nba, different passwords). The rom I grabbed was 1.12 from the "How to upgrade with the latest I-mate Jam ROM --GUIDE--" thread. any suggestions for one that will work?
Hi
I've spent the past few days geeking with my MDA, using the wealth of info from this forum.
I tried the JasJar rom (too much [email protected]), and ended up with:
- XDA CE Rom (1.13.48 )
- Radio From O2 Rom (1.04.02)
- Minimal Stuff from XDA/MDA ext roms
Goal was to install with the least [email protected] possible.
Step 1 - Flashing The XDA Exec Roms
First flash with O2 XDA Rom, using the info available here: http://forum.xda-developers.com/viewtopic.php?t=32725
To sumarise the above...
- Get XDA rom from:
ftp://xda:[email protected]/Uploads/Universal/Shipped ROM/Xda_Exec_LaunchROM_v113139.exe
- Unpack the above using winrar.
- Plonk MaUpgradeUt_noID.exe in the folder where you unpacked the O2 rom (you can get this file from the ftp site, in the file: ftp://xda:[email protected]/Uploads/Universal/JASJAR_WWE_11353_137_10402.rar
You only need the one file!
- Disable activesync
- Put MDA in bootloader mode
- Connect to PC via USB, wait for hardware detection
- Run the file MaUpgradeUt_noID.exe from the O2 Rom directory on the PC
- Wait ;-)
- Once it restarts, do the usual CE setup, but do not let the extended rom install (simply soft reset at the prompt). If you have gotten past this stage, just hard reset again, and do the soft reset at the correct point!
Step 2 - Installing Progs From Extended Rom
- You'll now have an MDA with the XDA CE and Radio roms installed. It will need the appropriate patches installing from the XDA and MDA extended roms.
- To start, DL both extended roms:
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
- For info on what each of these roms contain, look at the following threads:
MDA: http://forum.xda-developers.com/viewtopic.php?t=32839
XDA: http://forum.xda-developers.com/viewtopic.php?t=32527
- You dont need all that ****e, I installed the following:
XDA:
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB (bluetooth patch)
MDA:
CAB-Customization-TMUK-Universal-01-03-04Aug05.CAB (Adds MMS Server Settings)
CAB-Shorcut-TMOENU-08Aug05.CAB (Adds MMS to outlook + installs some shortcuts which you can remove later)
Enable_VT_RTPlugin_0727_2_signed.CAB (Enables Video Calling)
Signed_UNI_TMO_Connection_112100.CAB (Adds 'T-Mobile Internet' and 'T-Mobile Internet CS' for GPRS/3G connection)
Stage 3 - Cleanup
- The CAB CAB-Shorcut-TMOENU-08Aug05.CAB also installs a links. If you dont install the cab TMO_UK_UI_0727_signed.CAB then these will be dead llinks. The 'clearvue pdf' reader is a part of this cab (but if you install it, you'll get all the other sh1te it contains also. I was not interested in the PDF reader, so I just trashed the dead links.
- There are two dead links in Programs (they'll be obvous by their icons. I seem to remember them being 'clearvue PDF' and 'EmailWiz' In Explorer, browse to /windows/start menu/programs and trash them.
- Several shortcuts are installed in /windows/startup. Trash the elatepushservice (I dont know what this does, but I dont appear to be missing anything!), sddeamon (this causes the prompt 'view pics on card' when you insert a card containing jpgs from digicam etc). DONT trash 'poutlook' as otherwise the MMS folders wont appear in pocket outlook.
- Install Pocket Mechanic, and use it to ditch bad registy keys and cleanup the notification que.
- Could also install the ext rom unlocker & Total Commander so that you can shove only the cabs you want into the ext rom (or use the space for somet more useful) See Here: http://forum.xda-developers.com/viewtopic.php?t=33638 (Cheers Buzz!)
Registry Hacks
Goto: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry and pick some registry hacks to install. I did 'keys on today screen', 'disable start menu animation', 'change pocket ie', 'change fonts', 'change glyph cache' and 'change web hardware button' - to 'about:blank'
Goto:
http://forum.xda-developers.com/viewtopic.php?t=33515 and make the suggested changes to the cache settings. I found that this did speed stuff up, but since its only cache settings, it will only speed up stuff the second time you try and do it!
Soft Reset
Install Your Progs
I installed
In Internal Mem
Resco Explorer (+regedit +ftp) to replace the MS sh1te
Resco Pic Viewer (to replace the MS App)
Pocket Informant (case the built in stuff is useless)
Resco Audio Recorder
Resco Pocket Radio
TCMP Media player
Net Remote (to control my HTPC)
SPB GPRS Monitor (from MDA CDROM)
Zimmermann Pocket Hosts (essential for VPN use)
Small menu (so I can ruddy well close open apps!)
IPConfig
Pocket Putty (SSH)
On CF Card
Total Commander (to get to the ext rom)
WiFiFoFum (for free email on the move ;-)
Pocket Mechanic
Concluding
Machine is now both fast, stable and not full of bloat-ware. Have 22MB free storage, and 27MB free program memory.
Main Issue left is the time that machine takes to respond to an incomming call when its switched off. On the original MDA rom, I had 4 rings before machine actually rang. Now I have about 2.5.
Time for sleep! I'll read through this tomorrow and correct any errors...
Nigel
One essential point.
According to the publisher, Pocket Mechanic should not be installed to the SD-card, especially if you intend using any of Pocket Mechanic's functions against the SD-card - could lead to corruption.
Personally, I've installed (and run) many of the applications you've listed as "Internal mem" direct to the SD-card without experiencing any problems.
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
veletron said:
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
Click to expand...
Click to collapse
I can understand Pocket Mechanic objecting when you defrag/benchmark the medium it itself is running from.
Haven't had any problems with Resco, but haven't tried the update facility.
velvetron
I am an o2 uk user... I am asuming you are too..
I see you installed the tmob cabs for interent and 3g connection... does this work on o2 or am i being stupid..
Which should I install please advise
magpie
Re: velvetron
magpie2000k said:
I am an o2 uk user... I am asuming you are too..
Click to expand...
Click to collapse
Nope I am a t-mob user. If you are with O2 then you wont be wanting to install stuff from the T-mob ext rom!!
Nigel
want to change dopod 900 (chinese rom) to o2 exec rom
is it feasible?can thr be any incompatibility?
where can I find JASJAR_WWE_11353_137_10402.rar ?
Hi,
I am gathering the files to perform the upgrade as detailed in this thread, however I can't seem to find JASJAR_WWE_11353_137_10402.rar.
Is there a better one to use now ? or should I keep searching for JASJAR_WWE_11353_137_10402.rar ?
In fact most of the links have moved ...
Thanks
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
Can you dump your extended rom and post on the ftp site?
I've tried installing the french version, but the UI won't install. Most odd...
I can't find the ROMS
I keep getting :
File not found
You tried to access the address ftp://[email protected]/Universal/Extended ROMs/, which is currently unavailable. Please make sure that the Web address (URL) is correctly spelled and punctuated, then try reloading the page.
Can any one point me in the right direction ?
I have a T Mobile (UK) MDA PRO, the wifi connection lasts for about 3 seconds, then it keeps trying, but failing.
These are the ROMs I'm after :
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
Thanks
Hi
Looks like someone has trashed the FTP site (again) all those roms have dissapeared. Hopefully they'll get restored... Did a backup exist??!
I'll search my laptop see if I have any of the missing roms
Nigel
Yup the FTP's missing practically every file...
I need the NO ID upgrade launcher file to flash my MDA Pro to XDA Exec please.
If anyone can upload it or send it me accross msn it'd be much appreciated
take a look at the last post :
http://forum.xda-developers.com/viewtopic.php?t=35123&highlight=
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
This is all I've worked out so far:
Signed_ORUK_Customize.sa.CAB
sets orange wap homepage
Signed_DiscoButton8.sa.CAB
GPRS disconnect button
Enable_VT_RTPlugin_0727_2_signed.CAB
Ringtone plugin, phone skin
UI_Orange_UK_0727.cab
The orange plugin on today screen???
Mat
Also, if anyone would like it - you are free to download contents of Orange M5000 extended ROM from my website:
www.compsoc.man.ac.uk/~matsmith/bobs/orange.zip
hi,
i have noticed that O2 has "mobile solutuions o2 active ui" installed in it by default, i love this user interface and would like to install it on my PDA2K runnig latest WM5 with patches... i tried copying the directory file from an o2 device onto my pda2k but it didnt work...
so is this UI available anywhere to download and will it run on the i-mate pda2k??
regards
try this, it is from the o2 1.40 rom. i installed this on the t-mobile 1.40 rom and works perfectly, you could try it, if it dont work, then just uninstall it
if it does work, id like to know if it does, cos i might go back to WM5.0
if you go to the xda dev ftp site.
ftp://xda-developers.com
follow the following path
ftp://xda-developers.com/Uploads/Blueangel/O2_UK_XDAIIs_WWE_14000_237_11200_SHIP[Extended_ROM]/
in that folder, you will find the file named, Install.arm.cab
this is the cab file to install o2 active.
to access the ftp you need to log on with xda as both user name and password.
hey jo,
its nice to c someone willing to help, cheers...
unfortunatly, where i am currently, i cant access ftp, and this is the only place i have internet access around here (am not home... business trip), so its either untill Feb that i will be able to access it or someone can upload it on http...
regards
Hi all, what's the best software to use if I want to create .cab file for installing apps or chaing registry etc on the Universal's WM5/WM6?
I have tried "WinCE CAB Manager" but the cab file failed to be installed on my Windows Mobile emulator for some reason. I know you can use Visual Studio .NET 2005 something like that, but is there any lighter program in addition to VS .NET?
Thanks in advance!
kevin.jiang said:
Hi all, what's the best software to use if I want to create .cab file for installing apps or chaing registry etc on the Universal's WM5/WM6?
I have tried "WinCE CAB Manager" but the cab file failed to be installed on my Windows Mobile emulator for some reason. I know you can use Visual Studio .NET 2005 something like that, but is there any lighter program in addition to VS .NET?
Thanks in advance!
Click to expand...
Click to collapse
"WinCE CAB Manager" but the cab file failed to be installed on my Windows Mobile emulator for some reason -> u maybe set the wrong version variables?
check it! ;-) i think it workz!!!
I have set it to support all CPUs and on the OS type I have set it to support Pocket PC 2005. I will give it some more go later and see how it does.
Hi, it is still not working, I have attached the screenshot of the configurations in the cab and the error messsage I get. I tried it with my Universal and the Windows Mobile Device emulator and I got the same error.
Can anyone tell me what I have set wrong in this CAB? Thanks!
BTW, I was only trying to add a small .txt file by using this .cab as a test.
I have just got it working now! I installed WinCE CAB Manager on another PC and it is working fine!! For some reason the cab file it makes on my laptop doesn't work.
Anyway, I will use the other PCs to create the cab file then.
Wrong thread... Sorry
ive got wince 3.0 but it goin to expirer and a friend on here gave me wince the portable one, but cant get it to work with my win7 64bit even after changin to run in winxp service pack3 and run as admin. if anybody could help me find one u can pm me thanks..
LiquidXed said:
ive got wince 3.0 but it goin to expirer and a friend on here gave me wince the portable one, but cant get it to work with my win7 64bit even after changin to run in winxp service pack3 and run as admin. if anybody could help me find one u can pm me thanks..
Click to expand...
Click to collapse
Try QuickCab v2.0 free!
I initially also used QuickCab but since it lacked some features (for one the ability to use a custom setup.dll was removed in version 2.0) and IABovine apparently stopped development I searched for alternatives:
Pocket PC Setup Creator - free for non commercial usage
Phone Setup Creator - not as much featured but author seems open to suggestions
Extendir Cabs - a cabarc GUI made for creating cabs for extendir
MSCEInf - excelent cab setup extractor (it preserves the file names and setup structure)
There's however no free cab setup "editor" that I know other than WinCe Cab Manager...
PS: QuickCab version 1.0 is not in the original thread so I attached it bellow.
thanks man, ive got a hex edited version of wince 3.0. does that Pocket pc creator have an expire. ?
No expiration date, nag screens or anything else... You get the complete version (almost since you can't use a custom setup.dll) not just a trial.