Hi,
When I look at the connections that I have set up it shows o2 mobileweb and o2 Active. How can I delete the o2 Active settings so that it no longer appears in SPB data monitor?
I have set the "o2 profile" to show on my today screen however, it also shows the speaker and microphone ring level indicators which I don't want. There doesn't appear to be an option to remove. Is there a reg. tweak that I could use to remove the two icons?
Rob.
Related
my blueangel has a great ringtone i want to keep but i would like to increase the ring duration before the voice mail kicks in
anyone know how to do this orange CS dont seem to?
have tried **61*voicemailnumber*duration up to 30 secs# =no joy
thanks
This exactly the same thing I wanna know. Anyone can answer this plz.
You could try going to Phone -> Menu -> Options -> Services -> Call Forwarding -> "Get Settings" and you should see a screen like my attached image, just set everything the way you like. Unfortunately in germany with the sim i have, i can't set it to more than 30secs, for that i would have to delete the call forwarding entirely, but the settings you see there should probably help you a little, if that doesn't work, like in my case, contact your carrier, whether there are forced call forwardings or max. times you must not exceed to avoid network traffic and keep their net clean. that is the case in germany, the operaters do not want busy lines when nobody's actually on the phone.
greetz
Chef_Tony
Chef_Tony said:
You could try going to Phone -> Menu -> Options -> Services -> Call Forwarding -> "Get Settings" and you should see a screen like my attached image, just set everything the way you like. Unfortunately in germany with the sim i have, i can't set it to more than 30secs, for that i would have to delete the call forwarding entirely, but the settings you see there should probably help you a little, if that doesn't work, like in my case, contact your carrier, whether there are forced call forwardings or max. times you must not exceed to avoid network traffic and keep their net clean. that is the case in germany, the operaters do not want busy lines when nobody's actually on the phone.
greetz
Chef_Tony
Click to expand...
Click to collapse
This is great. Thx so much.
ok, i just upgraded my AT&T contract and i got a Treo 750 with WM5. after doing some reading, it seemed AT&T was not going to release the WM6 ROM fast enough, so i went with the unbranded one directly from PALM...yada yada yada...i ended up deciding to switch to the Hermes (8525).
the issue that i have run into is that on the 750 with WM6 under Setting>Sounds & Notifications>Notifications, i could select settings for Phone: Incoming Call, Phone: Missed Call, Phone: Voice Mail, and Phone: Unknown Caller (maybe more). on the 8525, the latter seems to be missing. i was wondering if this option is just removed from the AT&T WM6 ROM and is present in the unbranded HTC one, or if there is some way to add this option back in fairly easily.
apologies if this is an overly noob question, i couldnt find anything in a general search.
"Incoming call", "Missed call", "Voice mail", that's all. No "Unknown caller" here (neither was in on any ROM i've tried). It's a Palm's addition.
ok, does anyone have any recomendations on how to pull that off?
I use Photo Contacts Pro, which allows all contacts to have their own ringtone, including Private and Unknown numbers.
Call firewall automatically hangs up after the first ring with unknown and blocked calls (you have to check the radio box for it to do it after install). Cool little app for sure, a must have really.
SOLUTION!!!
ok, i know it's been a while, but i found the answer to this issue over at:
http://www.sprintusers.com/forum/showthread.php?t=143176
it takes editing a couple registry keys, but they were already present, i just had to change the values. the 2 keys you are looking for are:
HKCU/ControlPanel/Sounds/RingTone0/
and
HKCU/ControlPanel/Sounds/KnownCallerRing0/
when i first checked them (using the registry explorer in Total Commander), KnownCallerRing0 had no values. so i opened RingTone0 and copied all the entries (Sound, Script, SavedSound, and Category) and pasted them into KnownCallerRing0.
KnownCallerRing0 represents the ringtone for people who are listed in your Contacts, but don't have a caller specific ringtone. edit the Sound value to point to the ringtone for them. mine is: \Storage Card\My Documents\My Ringtones\Vintage 2.mp3
RingTone0 represents the ringtone for any calls that are not from someone already saved in your contacts list. edit the Sound value to point to a ringtone for these "strangers". i have: \Storage Card\My Documents\My Ringtones\Silence (5 Seconds).wav
after changing these, i did a soft reset and then made a call from my work phone, and...*RING* *RING*. then i went to a phone at a co-workers desk who has never called me, and..........nothing..........just peace and quiet. i don't know if you need to copy all the values from RingTone0 to KnownCallerRing0, or if you have to do a soft reset, but that is the exact procedure i took and it worked. i hope this helps someone.
Great find....
Thnxs...
Great post! Thanks for the info!
thanks, the infos are very useful!!
Just another *ME TOO*. Thank you so much. I have been looking for this.
Scruffy
Hi guys,
I have played intensively with my TP2 for a few days now and I must say once you find your way in this device it's great!!
However I still have a few minor questions, which I haven't find the answer to in the users manual or on this forum.
1. Is it possible to select different or custom icons for the e-mail accounts listed in a column on the right side when opening the main e-mail screen? I have 4 accounts and it would help a lot if I could instantly see which one is which...
2. Is it possible to change a setting so that sent e-mails are NOT automatically marked as unread but as read? It is just distracting when opening the e-mail account tree.
3. I am now using Lockmelite which is a great app, but I would like to have a "full screen" touch lock app. Any alternatives?
4. I have a problem when my TP2 is connected to my BT carkit (Prius). When I want to answer a call by pressing the pickup button on my steering wheel or dash screen, the ringtone suddenly plays over the car audio system, but it doesn't pick up how many times I press them. I have to pickup on the TP2. I have lockmelite set to unlock the screen on an incoming call if that makes any difference but I would really like this to work! I can't find any settings in the TP2 for this.
5. Is it possible to have the wifi auto connect to "known" networks? It now seems I have to connect manually every time I come home. I don't have to enter any authentication but I would like it to automatically connect instead.
That's it for now, thanks a lot!
Hey guys,
I've already searched a lot of stuff in this forum and enjoyed your work - amazing
But I've got following problem:
My Voicemail show's ALWAYS that there are new messages. But I have no Voicemail activated and NO Voicemails.
I got the solution for my problem already, it's to change the registry key with the following Reg file:
REGEDIT4
[HKEY_CURRENT_USER\System\State\Messages\vmail\Line1\Unread]
"Count"=dword:00000000
How can I put that into a batch file on Autostart or something?
Because everytime I softreset - it's deleted - and I got the problem again.
The Autostart on WM 6.5 doesn't handle reg files
It would be nice if you give me some tips for this.
Thanks in advance.
chriZ
I take it this issue happens after a hard reset or rom flash, but entering those reg settings makes it go away? Made a cab to enter your registry settings, hope it works for you. Alternatively you can have Sashimi add registry files automatically. If the problem occurs every time you soft reset I don't know the answer, sorry.
Well - it didn't helped , but thanks for your help...
After installing the symbol for Voicemail is already there.
If I change it manual via Mobile Registry Editor it's fixed directly after synchronizing via Active Sync.
Another possible solution could be, to set the reg worth permanently to zero?! Is this possible?
That would solve the whole problem...
I had this problem too and I've fixed it by leaving a voicemail to myself
and delete it right after that. the 'new voicemail' icon disappeared and the problem
is now solved.
But, i do have a voicemail activated so i don't know if this is the right solution for you.
Maybe you should try enter your phone setting :
Setting -> Personal -> Phone, and then tap the 'Services' tab.
Choose "Voice Mail and Text Messages" and tap 'Get Setting'.
Do you see any number associated under 'Voice Mail' ?
If it does, try to delete it.
Thanks for your tip, but the Voicemail is deactivated by provider and I can't turn it on
I know the number of Voicemail too, but if I dial the number, I can just turn on and off the notification SMS if I missed a call.
Hi guys,
Been doing a bit of searching, and can't find out if it's possible to choose a MP3 for email notifications. Could do it on the HD2 easy, and have a different tone for all notifications.
I can set a ringtone no probs, set the sms tone ok, just the email one I need a lift on.
Cheers
Darrin
did anyone find out how to do this ?
Not with the standard mail applications installed on the Desire. With K9mail it's possible.
of course you can do it.
Create a folder on the root of the sd card called 'notifications' (exactly like that but obviously without the quotes)
Put your MP3 in there.
In settings > sound and display, set the notification there. That is the setting that the default mail program uses.
then, to keep it different for SMS, go into the messaging application, and press menu>settings.
set the SMS tone there.
do the same in Google mail. open, menu, settings, set tone for google mail
this is extremely simple because nearly all programs have their own notification settings, and only the mail program seems to use the default one in settings.
how much more simple can it be?
That's a workaround, which i did actually know, but it doesnt alter the fact that you have the same tone for all other default notifictions, as well as the mail notifications.....
I just got my Desire HD and that seems to work for the the likes of GMAIL etc but Exchange just has this little beep and I can't see how to change this?
Post in the Desire HD forum for a start
Ok to V8Dave Eddy is correct as this may or may not work with your phone you are welcome to try it but if it doesn't might be better for you to get an answer in the DHD forum..
Anywho ---- There are 2 different notifications within the system that you can set .. The first is in settings>sound>notifications --- please note this will work for everything on your phone that needs a notification -- unless selected differently by program.. Your email will now have this notification .. To ensure it works start mail menu(hard button)>more>settings and turn the notification sound on
The second is hidden within the SMS app itself so start message>menu(hard button)>notification sound.. the SMS will now have a different sound to other notifications you may also be able to do the same with other apps i haven't checked them to be honest...
Now it should play seperate tones for sms and email and you can set your ringtone differently too ..
If that fails download LED me know http://www.xda-developers.com/android/customise-notifications-with-led-me-know/ from the market That should enable different notifications for several apps in one go